37/SE/EDCCKT/2023-24

The work of safe carriage of the following material with loading/unloading from store centre to site of work. (Approx. Distance 0 to 40 Km.)

Safe cartage of 8.5 Mtr. Long PCC poles.

Safe cartage of 11 Mtr. Long ST poles.

Safe cartage of 13 Mtr. Long ST poles.

ACSR Weasel Conductor

ACSR Dog Conductor

AB Cable (3x95+1x50+1x16) sqmm

AB Cable (3x120+1x95+1x16) sqmm

11 KV XLPE Cable 3x120mm2

11 KV XLPE Cable 3x185mm2

LT XLPE Cable 3.5 core, 300 sq mm Cable

LT XLPE Cable 3.5 core, 240 sq mm Cable

LT XLPE Cable 3.5 core, 120 sq mm Cable

Other Line material i.e. cross arm / pin insulator /Disc insulator/GI wire/T-off/Top/Dropper Channel/Base Angle/stay / earthing set/Distn. Box etc. except A.B Cable.

Dragging of PCC/ST Pole as per RESPO Norms.

Fabrication and Erection of Double Pole Support on ST 13 Mtr. Pole including grouting with 1:4:8 ratio Cement, sand & Brick Ballast& including digging of pit and fixing of all accessories clamp & earthing as per RESPo Norms. (Cost of clamps borne by contractor)

Fabrication and Erection of Double Pole Support on PCC Pole including grouting with 1:4:8 ratio Cement, sand & Brick Ballast& including digging of pit and fixing of all accessories clamp & earthing as per RESPo Norms. (Cost of clamps borne by contractor)

Fabrication and Erection of Single Pole Support on PCC Pole including grouting with 1:4:8 ratio Cement, sand & Brick Ballast& including digging of pit and fixing of all accessories clamp & earthing as per RESPo Norms. (Cost of clamps borne by contractor)

Fabrication and Erection of Single Pole Support on ST 11 Mtr. Pole including grouting with 1:4:8 ratio Cement, sand & Brick Ballast& including digging of pit and fixing of all accessories clamp & earthing as per RESPo Norms. (Cost of clamps borne by contractor)

Grouting and Binding of Stay in 1:4:8 ratio with cement, sand and brick ballast including cost of all grouting materials as per RESSPO Norms

Earthing of Poles as per RESPO Norms

Stringing, Sagging, binding and jumpering of ACSR Weasel as per RESSPO Norms

Stringing, Sagging, binding and jumpering of ACSR Dog as per RESSPO Norms

Stringing, Sagging, binding and jumpering of AB Cable Size (3x95+1x50+1x16) as per RESSPO Norms

Stringing, Sagging, binding and jumpering of AB Cable Size (3x120+1x95+1x16) as per RESSPO Norms

Supply & Installation of Heat Shrinkable Type cable jointing kits outdoor end Termination suitable for 11 KV XLPE cable 3x185 mm2 confirming to IS ESI-09-13-IS-13573 of 1992 amendment I&II VDE-0278 of latest version there of if any. ( Jointing Kit supplied by Contractor)

Supply & Installation of Heat Shrinkable Type cable jointing kits Differnt Size with Tape end Termination suitable for 11 KV XLPE confirming to IS ESI-09-13-IS-13573 of 1992 amendment I&II VDE-0278 of latest version there of if any. ( Jointing Kit supplied by Contractor)

Laying of underground D/C 11 KV 3x185 sq mm by trunch XLPE Cable in Normal Soil by digging of trench 1050 mm deep, 750 mm wide including supply of required material as fine sand, Ist class bricks as per norms. (All the material will be supplied by the contractor except 11 KV XLPE cable)

Laying of underground 11 KV 3x120 sq mm by trunch XLPE Cable in Normal Soil by digging of trench 1050 mm deep, 750 mm wide including supply of required material as fine sand, Ist class bricks as per norms. (All the material will be supplied by the contractor except 11 KV XLPE cable)

Laying of underground D/C 11 KV 3x185 sq mm with HDPE Pipe Road Crossing (HDPE Pipe will be supplied by the contractor on his own cost)

Laying of LT Cable along with cost of Brick & sand

Construction of Plinth of 250/400 KVA Transformer including excavation of foundation, base concreting of 1:6:12 (Cement mortar of Ratio 1:4 foundation, CC in 1:4:8 ratio (Cement fine sand and brick ballast ) and RCC work with ratio 1:2:4 Cement, Coarse sand and Stone Grit of 20 mm gause as per RESSPO norms

Fencing of Transformer Plinth 250/400 KVA with the help of wire mesh/Barbed wire after grouting proper size of angle as per RESSPO Norms. Inclusive of all material such as Wiremesh/Barbed Wire, Angle Flats, Nut Bolts etc.

Shifting of Distribution T/F with assoseries with different capacity

Erection & Commissioning of of Three Phase 4 W Distribution Box with help of clamps (Cost of clamp & Bolt & Nuts shall be borne by contactor) as per Norms.

Erection & Commissioning of of Single Phase Distribution Box with help of clamps (Cost of clamp & Bolt & Nuts shall be borne by contactor) as per Norms.

Supply and Installation of G.I. Pipe 6'' dia.

Supply of Distribution Pannel A Type and its Installation by grouting and Plinthing of Stacture ascpet Ratio 1:4:8 Cement , sand, conncrete 300x300x800 mm size of each legs

Supply of Distribution Pannel B Type and its Installation by grouting and Plinthing of Stacture ascpet Ratio 1:4:8 Cement , sand, conncrete 300x300x800 mm size of each legs

Supply of Distribution Pannel C Type and its Installation by grouting and Plinthing of Stacture ascpet Ratio 1:4:8 Cement , sand, conncrete 300x300x800 mm size of each legs

The work of safe carriage of the following material with loading/unloading from Site to store centre. (Approx. Distance 0 to 40 Km.)

Rec. Back old ACSR Weasel Conductor

Rec. Back old ACSR dog Conductor

Rec. Back old Iron Material

Rec. Back old AB Cable

Hindustan Electric Work

M/s Shubham Traders