PROVN OF SINGLE JCOS DEFI ACCN WITH SCOOTER SHED AND CAR PARKING ALONGWITH SANITARY FITTINGS NEAR JCOS MESS OF AD REGT AT PARADE GROUND BHARATPUR MIL STN

SCHEDULE 'A' SECTION-I (BUILDINGS/STRUCTURE WORKS)

SCHEDULE ‘A’ SECTION-II (PART-I) (INTERNAL WATER SUPPLY WORKS)

Lump sum price worked out by the Contractor for “Internal Water Supply Works” as listed in Schedule ‘A’ Section-II (Part-I).

SCHEDULE ‘A’ SECTION-II (PART-II) (INTERNAL WATER SUPPLY WORKS)

Subtotal {Total of Schedule 'A' Section-II (Part-II)}

SCHEDULE ‘A’ SECTION-III (PART-I) (INTERNAL ELECTRIFICATION WORKS)

Lump sum price worked out by the Contractor for “Internal Electrification Works” as listed in Schedule ‘A’ Section-III (Part-I).

SCHEDULE ‘A’ SECTION-III (PART-II) (INTERNAL ELECTRIFICATION WORKS)

NOTES FOR LED LIGHT FITTINGS : (i) All LED light/luminare shall meet the provision laid down in IS - 16101, 16102 Part-I/II, 16103 Part-I, 16104, 16105, 16106, 16108/2012 and 15885 Part -II / Section 13. (ii) Contractor shall submit test report of LED street light fitting from Government accredited test laboratory for LM-79 and LM-80. (iii) Contractor has to furnish a on site replacement warranty of 05 years for LED light fittings complete including lamps from the date of completion of contract. The product will be replaced free of cost in the following case :- (a) Manufacturing defects. (b) Failure due to mechanical and electrical impact. (c) Drop in lumen (or lux at 1 m) below 90% of claimed values of lumen (or lux at 1 m) of the LED /Luminaries.

Subtotal {Total of Schedule 'A' Section-III (Part-II)}

Lump sum price worked out by the Contractor for “Road/ Path and Culvert Works” as listed in Schedule ‘A’ Section-IV (Part-I).

S&F Centre hole mixer for mixing hot & cold water for wash hand basin, cast copper alloy, with dual capstan heads, chromium plated, screwed down high pressure, with lettered 'Hot' & 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe suitable for 15mm bore, complete all as specified as directed.

SCHEDULE 'A' SECTION-IV (PART-I) (ROAD/PATH AND CULVERT WORKS)

Subtotal {Total of Schedule 'A' Section-IV (Part-II)}

SCHEDULE 'A' SECTION-V (Part-II) (SEWAGE DISPOSAL WORKS)

Lump sum price worked out by the Contractor for “Sewage Disposal Works” as listed in Schedule ‘A’ Section-V.

M&L for factory made precast cement concrete solid block 1:2:4 type B1, using 20mm graded crushed stone aggregate as in kerb stone of size 300x150x150mm and the like setting in cement and sand mortar (1:4) complete all as specified and directed.

Subtotal {Total of Schedule 'A' Section-V (Part-II)}

SCHEDULE 'A' SECTION-V (Part-I) (SEWAGE DISPOSAL WORKS)

SCHEDULE 'A' SECTION-VI (Part-II) (EXTERNAL WATER SUPPLY WORKS)

All as per serial item No. 14.00 here-in-before but for one 3 pin 15/16 Amps socket outlet controlled by one 15/16 Amps switch on independent board with 4 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLSH cable 1100 Volt grade (ISI marked) including 4 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLSH cable 1100 Volt grade (ISI marked) as continuous earth wire in green colour complete all as specified & as directed.

Lump sum price worked out by the Contractor for “External Water Supply Works” as listed in Schedule ‘A’ Section-VI (Part-I).

SCHEDULE 'A' SECTION-VI (Part-I) (EXTERNAL WATER SUPPLY WORKS)

Subtotal {Total of Schedule 'A' Section-VI (Part-II)}

M&L for drilling and tapping cast iron water mains (in position) for branch connection of the internal dia 80/100mm GI/DI pipe complete all as specified and as directed.

Supply, laying, jointing and testing LT XLPE insulated screened, bedded, galvanised steel strip or wire armoured heavy duty electric cable with aluminium stranded conductor 1100 Volt grade cross sectional area 16 sqmm 4 core laid in trenches/ducts, through pipe, under floors or roads/ along poles etc complete all as specified and directed. Note:- Sand cushioning, cable protection, GI protection pipe, clamps, jointing kits and excavation & earth work shall be measured & paid for separately.

Supply, laying, jointing and testing LT XLPE insulated screened, bedded, galvanised steel strip or wire armoured heavy duty electric cable with aluminium stranded conductor 1100 Volt grade cross sectional area 120 sqmm 3.5 core laid in trenches/ducts, through pipe, under floors or roads/ along poles etc complete all as specified and directed. Note:- Sand cushioning, cable protection, GI protection pipe, clamps, jointing kits and excavation & earth work shall be measured & paid for separately.

Material & labour for river sand cushioning using clean local Tibba fine sand for underground cable 8 cm before laying cable and 15 cm after laying and punned to 18 cm after laying of cable complete all as specified and as directed. Note :- Punned thickness shall be considered for payment purpose.

M&L for earthing to equipments etc with & including galvanised mild steel earth plate electrode of size 60cm x 60cm x 6mm thick buried vertically in ground (earth pit not less than 2.25 m below normal ground level) with top edge of the earth plate at a depth not less than 1.5 m below ground level, the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15 cm on all sides, connected to & including galvanized mild steel strip 32x6mm as earth lead, including nuts, bolts, check nuts & washers of galvanized iron or steel and riveted/welded to earth plate at one end and o

ther end of strip connected to Panel / transformer / GOD / equipment body / test point with two Nos nuts bolts or welding with steel structure, GI earth strip encased in and including 40mm bore GI light grade pipe with all fittings from upper edges of earth plate upto 7.5 metre above ground level fixed with and including 25x3mm flat iron clamps, bolts, nuts and washer and also including providing watering pipe 20mm bore GI pipe medium grade from earth pit to top of electrode and including funnel, wire mesh, copper lugs etc complete with earth pit in PCC 1:3:6 type C1 using 20mm graded crushed stone aggregate and 40mm thick RCC (1:2:4 type B1) cover complete all as specified and shown in electrical plate No 3 of SSR Part-I including necessary excavation and earthwork in any type of soil, returning, filling in approved soil and disposal of surplus soil to a distance not exc 50m complete all as specified and as directed. Note : Upto 7.5m length of pipe 40mm bore and GI strip shall be deemed to be included in unit rate quoted by tenderer.

Subtotal (Total of Schedule 'A' Section-VII)