8103 ADDITION ALTERATION OF ZONAL CANTEEN BUILDING NO P 200 AT NAVAL DOCKYARD ADDITION AND ALTERATION OF BOUNDARY WALL AND CONNECTED ITEMS NEAR AGNIBAHU AND ADDITION ALTERATION OF COVERED SHED AT C NO 61 MCM DEPARTMENT AT NAVAL DOCKYARD MUMBAI UNDER

Amount

Taking up or down existing GI water tubing complete with all fittings of 25 mm bore complete all as specified and as directed.

Taking up or down existing GI water tubing complete with all fittings of 40 mm bore complete all as specified and as directed.

Taking down cement plaster on brick / surfaces built in cement mortar including raking out joints, bading for key scrubbing down with water etc complete all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortat bedding but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Taking down chowkats or frame with shutter ( without taking off shutter from frame) , n exc 1.5 sqm each complete all as specified and as directed.

Taking down chowkats or frame with shutter ( without taking off shutter from frame) exc 1.5 sqm but n exc 4 Sqm each complete all as specified and as directed.

Taking down 15mm bore, GI tubing and connections including cleaning for refixing or removal to store complete all as specified and as directed..

All as per item No 7 above but 20 mm bore GI Pipe complete all as specified and as directed.

Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and as directed.

M&L for PCC 1:2:4 type B-1, (using 20mm graded aggregate) as in foundation, filling mass concrete ,grouting of angle posts, pillars etc including necessary form work complete all as specified and directed.

S&F roof trusses (framed), trussed, purlins,crane gantries, rails and fastnings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.conforming to Fe 410-W (Gde- E-250) quality 'A' complete all as specified and as directed.

S&F for rolled mild steel sctions of grade Fe 410-W (Gde-E-250) quality-A as in stairs (framed) including stringers, treads, landing, balusters, hand rails etc, including cleats, brackets etc. complete all as specified and as directed.

S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment of Fe 410-W ( Gde-E-250 quality-A) complete all as specified and as directed..

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, chajjas, valley gutter, ridge and fixed with crumple joint etc fixed with self tapping screws complete all as specified and as directed.

M & L for preparation of new steel surfaces exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed .

S&F 1mm thick Plain, galvanised, mild steel sheeting in valley gutters, eaves, hips, drip and straight flashing (length and girth as fixed) with grade of zinc coating 275 complete all as specified & directed.

Demolition of brick bats, terracing tiles, etc on roofs and removing the same to store from terrace of high rise bldg etc complete all as specified and directed.

M & L PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in roof/chajja padding for maintaining roof/chajja slope complete all as specified and as directed

M&L for rendering 20 mm thick cement plaster in CM (1:3) on roof top surface finished even and fair including WPC by weight of 3% of total cement content complete all as specified and as directed. Note : WPC shall be measured and paid separately

Supply only integral water proofing compound complete all as specified and as directed.

M&L for machine pressed pavers terracotta (coloured) cement tiles of size 250mm x 250mmx 22mm/ 300mm x 300mm x 22 mm thick mix with grey cement and pigment laid over 20mm thick screed bed in CM 1:4 set and jointed and pointed in neat cement slurry in floors complete all as specified and direcetd.

M&L GI tubing medium grade with all fittings like Tee, bend, elbow etc, 25mm bore fixed to walls and ceilings or laid in floors complete all as specified and directed .

M&L GI tubing medium grade with all fittings like Tee, bend, elbow etc, 40 mm bore fixed to walls and ceilings or laid in floors complete all as specified and directed.

M&L for Gun-metal, globe or gate valves 25 mm, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed .

M&L for Gun-metal, globe or gate valves 40mm, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

Taking down PVC wastage and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, complete all as specified and as directed

S&F 160mm dia bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed

S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including fixing clips, bends, elbows, shoes etc complete all as specified and as directed .

S&F 110mm dia bore PVC (SWR) bends any radius complete all as specified and as directed

S&F 160mm dia bore PVC (SWR) bends any radius complete all as specified and as directed

S&F 110mm dia bore PVC (SWR) (T/Y) any radius complete all as specified and as directed

S&F 160mm dia bore PVC (SWR) (T/Y) bends any radius complete all as specified and as directed

S&F PVC Connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.

Demolition of brick work or stone /boulder masonry built in cement mortar, including all quoins, arches, pillars, etc complete all as specified and as directed.

M&L brick work with sub class 'B' bricks old size, straight or curved on plan exc 6m mean radius in cement mortar 1:4 complete all as specified and as directed.

M & L for brick work with sub class 'B' bricks (old Size) straight or curved on plan to any radius in half brick thick wall built in CM 1:4 complete all as specified and as directed..

Demolition of cement concrete in sunken floor and paving not exceeding 15cm thick below or above ground level un re-inforced complete all as specified and directed. .

M&L for PCC of type D2, 1:4:8 using (40mm graded stone aggregate) 100mm thick as in sub base complete all as specified and directed.

Material & labour for water proofing plaster for sunken portion in CM 1:3, 15 mm thick in two coats with integral water proofing compound at the rate of 3 % by weight of cement and finishing the surface even and smooth without using extra cement complete all as specified and as directed .

Material & labour for water proofing treatment of sunken floor/wall surfaces by applying two coats of elastomeric coatings of BRUSHBOND RSX in FOSROC or TECKFORCE 2K STRONG in CHOWKSEY CHEMICALS or equivalent as a two component flexible elastomeric coating with minimum 2mm thickness layer complete all as per manufacture's instructions and as directed.

S&F 4mm thick backelite with decoratve choice laminated on both side complition as specified and as directed

S & F 100 mm Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, type B-11complete all as specified and as directed .

S&F Aluminium anodised sliding door bolt 300m long, with hasp, staple (bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed .

S&F aluminium anodised Barrel tower bolts of extruded section, length of bolt 200mm complete all as specified and as directed ..

S&F Extrude aluminium anodised alloy handles, fabricated type 200mm size complete all as specified and as directed ..

M & L for Floor door stopper of aluminium alloy body 150 mm long and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed ..

Rounding to edges of stone slabs on edge, such as in steps, cooking platform and making grooves for lining and other similar work complete all as specified and directed.

S&F hand dryer complete all as specified and as directed .

S&F 15 mm dia medium grade galvanized steel tubing with all fittings fixed to walls, ceilings or laid under floors all as specified and directed complete all as specified and as directed.

As per item No 28 above but 20mm dia medium GI Pipe complete all as specified and as directed .

S&F in repair counter top wash hand basin incl chromium plated brass waste coupling and PVC waste pipe complete all as specified and as directed .

S&F 15 mm Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed .

S&F 15mm size Stop Valves fancy type chromium plated screwed down high pressure with crutch or butterfly handle handle screwed both ends complete all as specified and as directed .

S&F 15 mm dia fancy type pillar tap cast copper alloy with capston heads chromium plated screwed down high pressure with or without hot or cold with long screws shanks and fly nuts screwed for iron pipes complete all as specified and as directed .

S&F in repairs PVC Connections 15mm size with PTMT nuts of length 450mm screwed socket of brass on both ends and rubber washer complete all as specified and as directed ..

M&L PVC SWR floor trap 75mm, plain with grating including setting and jointing with silvent cement complete all as specified and as directed .

S&F brass CP towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S&F towel ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and as directed .

S&F toilet paper holder of vitreous china box type white coloured fixed to walls with chromium plated (CP) brass screws complete all as specified and as directed .

Supply only flush pipe of Polyethylene of low or high density or PVC 32 mm dia. complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mmX47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed .

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. M.S.frame shall be covered with heat moulded design with colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as specified and directed .

S&F aluminium window, doors with shutters / frames / partitions made out of extruded powder coasted aluminium sections, with sliding or openable shutters including frame & necessary joining cleats, glazing clip, powder coated aluminium snap beading, screws etc; complete and also including powder coated aluminium fittings such as cobra hinges, butt hinges, tower bolts hooks and eyes, peg syays and handles including connected items, with and including, making good to the disturbed portion with its original specification, complete all as specified and directed.

S&F Prelaminated particle board, 19 mm thick exterior grade, prelaminated both side with decorative choice lamination , fixed with screws to timber/Aluminium frame work. All as specified and directed.

S & F in repairs for aluminium anodised Deco grill 7.5 mm size DG-102, fixed to F/H frames, 1.5mm th, bar size 6.2mm and 7.5mm thick in required sizescomplete all as specified and as directed .

S&F aluminium alloy wire cloth, 0.56mm dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staple complete all as specified and as directed

M & L for Non skid coloured ceramic tiles 7 to 8 mm thick ( square/ rectangular) area of each tile exceeding 0.18sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of the tiles with and including 15mm thick screed bed in CM 1:4 complete all as specified.

M & L for Coloured glazed ceramic tiles in vertical surface 450X350X7mm thick with and including 10 mm thick cm (1:4) backing coat and Triangular filliting at top of skirting, set and jointed in neat cement paste and pointed in coloured cement to match the shade of the tiles complete all as specified and as directed .

M&L 20 mm thick Granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window- cills,cooking platforms, working table and like over 20 mm thick screed bed or bedding layer in cement mortar (1:4), including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed ..

S&F Anodised aluminium snap grid size 605x605mm frame work for false ceiling complete all as specified and as directed .

S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed .

M&L for false ceiling made out of 600x600x 4 mm thick ( non asbestos fiber cement designer/coloured)ceiliing board / tiles deep panel complete all as specified and as directed . (Make -Armstrong/Chanakya/Everest.

M&L 4 mm thick plain glass sheets ordinary quality in squares n.exc 0.5sqm each pane fixed with rubber beading for aluminium windows/doors etc complete all as specified and as directed .

M&L 4 mm thick plain glass sheets ordinary quality in squares exc 0.5sqm each pane fixed with rubber beading for aluminium windows/doors etc complete all as specified and as directed .

Supply only integral water proofing compound complete all as specified and as directed .pidiproof LW+ of Dr Fixit or equivalent.

M&L for rendering 15 mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finishing the surface fair and even and smooth without using extra cement all as specified and directed.

M&L for rendering 20 mm thick pre polymer modified ready mixed cement based plaster in two coats 12 mm thick base coat and 8 mm thick finishing/final coat. Polymer modified ready mixed cement based plaster should having minimum composition of cement & sand 1:4 using fully treated dry, well graded natural sand conforming to IS-383 suitable for external plastering having low rebound properties, low water demand for curing properties, mechnical mixing with water in a matalic tray only to made good, consistency as per the specification of the manufacturer and applied over exterior masonry and concrete surfaces incl using richer mix for making corners if necessary incl making grooves of existing size and necessary two legged MS pipe scaffolding as wherever required incl curing required upto G plus 5rd floor bldg complete all as specified and directed.

M&L Plastering 5mm thick in CM 1:3 on concete surfaces as in ceiling finished even & smooth without using extra cement in ceiling complete all as specified and as directed .

M & L preparation of new plastered surfaces and applying three coat of white wash on ceiling complete all as specified and as directed .

M&L for preparation of newly plastered surfaces of wall, applying two coats of oil emlusion distemper over a coat wall care putty of 3 mm thick and alkali primer complete all as specified and as directed ..

M & L for New treatment of walls and applying two coats of acrylic (antifungal) exterior grade paint of over one coat of primer on wall including preparation of newly plaster surface and necessary scaffolding upto G-3 storey complete all as specified and directed .

M&L prepration of old plastered / decorated surfaces of walls/ ceiling including complete removal of existing treatment by washing, rubbing down and stopping of distempered and painted surface and applying two coat of oil bound distemper over alkaline resistant primer with 3mm thK wall care putty on wall surfaces etc complete all as specified and directed.

Removing bldg material exc. 1.50 km but n exc. 5 km and depositing where directed complete all as specified and as directed .

M&L for rendering 10 mm thick pre polymer modified ready mixed cement based plaster on chajja top and soffits Polymer modified ready mixed cement based plaster should having minimum composition of cement & sand 1:4 using fully treated dry, well graded natural sand conforming to IS-383 suitable for external plastering having low rebound properties, low water demand for curing properties, mechnical mixing with water in a matalic tray only to made good, consistency as per the specification of the manufacturer and applied over exterior masonry and concrete surfaces incl using richer mix for making corners if necessary incl making grooves of existing size and necessary two legged MS pipe scaffolding as wherever required incl curing required complete all as specified and directed.

M&L for 10mm thick rendering in cement mortar 1:4 on fair face of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified.

M&L for average 8 mm thick Dholpuri stone tile on vertical surfaces of wall incl 15 mm thick backing coat in CM 1:3 laid and jointed in neat cement slurry and pointd with admixture of white cement and Dholpuri stone dust in 1:1 mortar complete all as specified and directed.

M & L excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth for foundation etc n exc 10 sqm on plan and not exc 1.5 m in depth and getting out hard/dense soil complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 ( 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

Removing excavated material (Rocks) n exc. 50 m and depositing where directed at a level n exc. 1.5 m above the starting point out side the MD Land complete all as specified and directed.

M&L brick work with sub class B bricks straight or curved on plan exceeding 6 m mean radius built in CM 1:6 complete all as specified and as directed.

M&L rendering 15mm thick in CM 1:4 on brick surfaces, finished even and smooth (without using extra cement) complete all as specified and as directed.

M&L PCC 1:2:4 type B-1 (using 20 mm graded aggregate) cement concrete as in coping apex stones, bed plates etc all as specifed and directed.

S&F mild steel framed work such as grills, gratings,chequred plates etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladder; framed balusters; walkj ways, railings, frame work for water tanks and similar work conforming to Fe 290 Gd E-165 complete all as specified and directed.

M & L 100 mm thick cement concrete type B2 1:2:4 (40 mm graded agg) including finishing the surfaces even and smooth without using extra cement complete all as specified and as directed

Material and Labour for machine pressed cheqered cement coloured tiles of size 300mmx300mmx20mm thick mix with grey cement and pigment laid over 15mm thick screed bed in CM 1:4 set and jointed and pointedin neat cement slurry in floors complete all as specified and directed .

Taking down carefully old U/S point wiring copper/Aluminum (light/ fan /sockets/power) complete with switches, sockets, fan regulators, ceiling roses, lamp holders, brackets, ,removing material to store for keeping in safe custody and making good to disturbed surfaces as directed .

M&L in repair point wiring complete with 1.5 Sq.mm single core multistranded PVC insulated & unsheathed copper conductors cable 1100 volts FRLS grade ISI make and drawn through & including PVC non metallic casing and capping with Accessories fixed on wall/ceiling/truss etc with PVC non metallic ISI make terminal boxes fixed on wall including one PVC insulated & unsheathed multistranded copper conductor 1.5 Sq. mm as earth continuity conductor connected to common earth dolly complete all as specified and directed. One light point controlled by one 5A switch

All as per item No. 100 above but for One Fan point controlled by one 5A switch complete all as specified and directed.

All as per item No. 100 above but for One 5A switch socket point on independent board complete all as specified and directed.

All as per item No. 100 above but for One 5A switch socket point on same board board complete all as specified and directed.

M&L for point wiring complete with proper clour coding using PVC insulated unsheathed multistranded copper conductor cable 2.5 sqmm size, 1100 volts ISI marked, FRLS grade drawn through and including non metalic rigid, double lock, ISI marked, not less than 25mm casing caping with all accessories such as tee, bends, elbow, reducers, junction box etcfixed on wall/ceiling/truss and one run of PVC insulated unsheathed, multistranded copper conductor cable of 2.5sqmm size, 1100 volts, ISI marked, FRLS grade green colour as earth continuty conductor connected to common earth dolly with and including modular box with cover plate frame in any module ( Make : schneider elect/legrand mosaic/anchor ave) complete for One 5 pin, 15A switch socket combination on the independent board complete all as specified and directed.

S & F in repairs modular switch 1 way 6A, 1 module complete all as specified and directed

S & F in repairs modular switch 1 way 16A, 1 module complete all as specified and directed

S & F modular socket, 6A - 2/3 pin combined 2 modules all as specified and directed .

S & F in repairs modular socket 6/16A,2/3 pin, combined 2 module complete all as specified and directed .

Supply and fixing White cover plate with frame,2 module complete all as specified and directed .

Supply and fixing metal flush box with ,2 module complete all as specified and directed.

S&F for modular fan step regulator, 120W - 2 modular complete all as specified and directed .

Supply and fixing ceiling fans complete with blades, down rods, and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 5.00 BEE. Five star rated with brushless direct current motor (BLDC),complete all as specified and directed ..

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed .

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers complete all as specified and directed .

Supply and fix ceiling rose surface bakelite three terminal of size 60x50 mm,240 Volts AC complete all as specified and directed.

sri construction

jalandhara construction

SACHINENTERPRISES

SHREE SHIV SHANKER ENTERPRISE

SR Construction

A.R. ENTERPRISE