PROVISION OF WEATHER SHELTER AT THE ENTRANCE OF

Amount

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Excavating over areas, n.exc.1.5m deep and getting out in hard / dense soil complete all as specified and directed.

Excavating over areas, exc 1.5 mtr but n.exc.3.0 m deep and getting out in hard / dense soil, complete all as specified and directed.

M & L for Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. Or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and getting out in hard/dense soil complete all as specified and directed.

M&L for cement concrete 1:4:8 type D-2 (40 mm graded crushed stone aggregate) as filing in mass complete all as specified and directed.

M & L Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.

Formwork to sides of pillars, posts, struts, piers, columns, and stanchions.

S&F TMT steel bars 10 mm dia and over, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking end and binding with and including MS wire annealed not less than 0.9 mm dia but in stirrups complete all as specified and directed.

S&F 5mm dia and over upto and including 10mm dia in strirrups spaces and binders complete all as specified and directed.

M&L for RCC Design mix M-25,(20mm graded crushed stone aggregate) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete all as specified and as directed.

M&L for RCC Design mix M-25, (20mm graded crushed stone aggregate) as in Columns, pillars, piers, posts and struts all as specified and as directed.

M & L for Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm each all as specified and as directed.

M & L for Removing excavated Soil exc. 1.50km but n exc. 5km and depositing where directed.

S & F Steel work in tubular trusses (framed and curved) including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 all as specified and as directed.

S&F rolled mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment as in gusset plate conforming ot Fe- 410-W-(Gde-E-250) quality A etc complete.

S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet (curved) 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

M & L for framed work such as grill, gratings, etc with ends of bars shoulderedand /or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work corn-conforming to Fe.290. Gde -E-165, complete all as specified and directed.

M & L for two coats of synthetic enamel paint for over a coat of primer incl preparation of new steel surfaces not otherwise described, over 10cm width or girth.

S& F 3 MM PVDF ACP sheet fixed in steel framework with neccesarry arrengement to seal proper all as specified and as directed. Make : Alstone / Reynoband / Aludecor / Euroband

Dismanteling wrought iron or mild steel work of any description not otherwise provided for all as specified and as directed.

Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings etc complete.

Dismantling of Brickwork or stone/boulder masonry, built in Cement mortar/cement lime mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles all as specified and as directed.

M & L for pre cast cement concrete block masonry with solid block exc 10 cm thk in width (with plain or interlocking joints as directed) complete, in walls and set in cement mortar 1:6 of PCC 1:3:6 (Type C1) all as specified and as directed.

M & L for Plain cement concrete (1:2:4), type B-1 (using 20mm graded crushed stone aggregate) as in benching, bed plates, coping and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work complete all as specified and as directed.

M&L Rendering 15mm thick cement mortar in 1:4 on fare face of brick work or concrete surfaces even and smoothe without using extra cement complete all as specified and directed.

M&L Rendering 10 mm thick on fair faces in cement mortar 1:6 of brick work or concrete surfaces to be finished even and smooth (without using extra lime or cement) complete all as specified and directed.

M&L Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

M & L for broken stone or boulders hard core of gauge n exc 63mm deposited spread and leveled in layers n.exc 15 cm thick watered and rammed to true surface.

M&L for 75 mm thick PCC 1:4:8 (40 mm graded aggregate) type D-2 as in sub- base of floor all as specified and directed.

S&F of non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over ascreed bed 10 mm thick including thick cement mortar 1:4, all as specified and as directed by Engineer-in-Charge.

M&L for preparation of new surface/undecorated surfaces of walls and applying two coats of Cement Base Paint of approved tint over a coat of priming on plastered and other surfaces with alkali resistant priming paint complete all as specified

M&L for preparation of new surface/undecorated surfaces of walls and applying two coats of Oil bound distemper over a coat of priming on plastered and other surfaces with alkali resistant priming paint complete all as specified.

M & L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding including backing, removing serviceable tiles to store and rubbish off the premises all as specified and directed.

Rendering 15mm thick cement mortar in 1:4 on fair finished face of brick work or concrete surfaces finished for receive tile complete all as specified and directed.

M & L for 20mm thick Granite (of any type) tiles machine cut, in skirting/ dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete complete all as specified and directed.

M & L for sub main wiring complete with two runs of 2 x 1.5 sqmm FRLS grade PVC insulated unsheathed cable 1100Volt grade multistranded copper conductor drawn through and including PVC conduit and accessories in recessed / surface of wall, roofs etc with one run of PVC insulated copper conductor 1x1.5 Sqmm single core as earth continuity conductor connected with earth dolly and mains complete all as specified and directed.

M & L for LED high bay light fitting of 80 Watt LED Highbay with tapered fin design and excellent thermal management along with LED IP66 luminaire with high efficacy , complete with LED lamp, fixed surger on suitable eye bolt clamp made to shape including necessary nut and bolt, including any alteration to fixed the new fittings complete with two coats of anti corrosive aluminium paint for eye bolt clamp complete and fixing at the height of upto 10 mtr in hangar ceiling all as specified and directed. Make - Crompton / Havells / Bajaj / Philips

Supply and fix Landscape light LED Spike/ Bush light of 9 watt with die-cast aluminum housing designed for rugged outdoor usage & IP 65 protection complete all as specifified and directed.

Supply and fix copper cable 1.5 sqmm 3 core complete all as specified and directed.

Supply and fixing MCB DB double door 8 way SPN with suitable 200 amps bus bar including cable / wires proper connection, the cable / wires with suitable size lugs complete all as specified and directed.

S & F MCB SPN 32 Amps, 'C' series, 240 V complete incl making conections all as specified and directed.

S & F MCB SP 6-32 Amps, 'C' series, 240 V complete incl making conections all as specified and directed.

Excavation in trenches in soft/loose soil not exc. 1.5 metre wide and not exc. 1.5 metre in depth and getting out for taking up / laying under ground electric cable including taking out old bricks from trenches and separating serviceable bricks and set aside for reuse complete all as specified and as directed.

Returning, filling in, including spreading levelling watering and well rammming in layers not exceeding 25 cms in depth complete all as specified and as directed.

Removing surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and as directed.

Supply, laying riddled earth soil conformed IS-1255, cushioning to cables with a layer of riddle earth soil 15cm deep before laying the cable and 8 cm depth after laying of cable, complete all as specified.

M&L for brick protection cover on cable with sub class 'B' brick laid dry flat adjacent to each other complete all as specified and directed.

Supply and fixing of GI tubing, light grade, 32 mm bore with all fitting lais in trenches / pole / wall for protection of cables in repairs complete. Make - TATA / JINDAL / Bansal .

Supply and laying cable XLPE insulated screened, PVC bedded, galvanised, steel strip or wire armoured, electric power cable, (heavy duty) 1100 volts grade, with stranded aluminium conductor of size 4 core x 10 Sqmm complete all as specified and directed.

PRAGATHI BUILDERS (BID ID -3089181)