PROVN OF TILING OF JCOS MESS, CHAIN LINK FENCING, LADIES TOILET, STORE FOR STORAGE OF LUBS AND GREASE, TOILET BLOCK AND CERTAIN SPL REPAIR WKS UNDER AGE B/R-I OF GE BENGDUBI MIL STN

Amount

SCHEDULE 'A' PART-I (B/R WORKS)

Dismantling of Asbestos cement (corrugated, semicorrugated etc) sheets in roof covering etc complete all as specified and directed.

S&F Pre-painted coloured trapezoidal profiled galvalume/Zincalume sheet thickness of 0.50 mm TCT confirming to IS-513 (AZ-150 GSM, Al Zn alloy mettalic coating with 550MPA yield stress as per AS-1397) as in roof covering/cladding to wall fixed with self tapping screws(12-14 x 55 with EPDM seals), colour /exterior coat of silicon modified polyster/BHP x RW paint system 20 micron top coat applied over 5 micron primer and 5 micron polyster back coat applied over 5 micron primer complete all as specified and directed.

S&F Pre-painted coloured trapezoidal profiled galvalume/Zincalume sheet thickness of 0.50 mm TCT confirming to IS-513 (AZ-150 GSM, Al Zn alloy mettalic coating with 550MPA yield stress as per AS-1397) as roof ridge fixed with self tapping screws(12-14 x 55 with EPDM seals), colour /exterior coat of silicon modified polyster/BHP x RW paint system 20 micron top coat applied over 5 micron primer and 5 micron polyster back coat applied over 5 micron primer complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/ slabs/ blankets, any thickness incl cover fillets, frame GI/Aluminium etc complete all as specified and directed.

S&F Decorated PVC False ceiling of size 600mmX600mmX5mm thick (±0.25) plain PVC sheet of 600 Kg/Cum density manufactured by an ISO-9000 certified company, used as a panel insert in a frame work made using anodized aluminum powder coated T-section of size 25mmX25mm of 19 gauge or 1mm thick in square pattern of grid size 600mmX600mm. The aluminum frame work is supported from the ceiling with the help of J Hook or 4 mm GI wire of required size to maintain the proper levels etc. The aluminum frame work is supported on side wall with the use of aluminum L section of size 25mmX25mm of 19 gauge or 1mm thick angles etc. complete all as specified and directed.

S&F 605mm x605mm Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed.

S&F for Hangers 4mm dia G.I. (up to 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 X 3 mm size 60 mm long and expansion hold fasterners 12.5mm dia, 40mm long complete all as specified and directed.

M&L for providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhyrous) to flat surface over II class soft wood fillet and reinforced with GI wire complete all as specified and directed.( Note:- Fillet an GI wire shall be measured and paid seperately)

Material and labour for screed bed or bedding layer of mortar, 15mm thick cement mortar 1:6 laying floor finishes etc complete all as specified and directed.

M&L for Non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tile complete all as specified and directed.

M&L for vitrified ceramic tiles 10mm thick (squares/rectangular polished) area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed with white or coloured cement to match etc complete all as specified and as directed

Ditto all as per item No 11.00 here-in-before but on skirting.

Dismantling floor, hearth or wall tiling including cement mortar bedding(But not backing), removing serviceable tiles to store and rubbish off the premises

M&L for glazed ceramic tiles coloured of size 450x350x7mm thick as in dado, skirting, riser to steps, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of the tiles complete all as specified and as directed.

Taking down cement plaster on brick or concrete surface etc including racking out joints, hacking for key, scrubbing down with water etc including removing the item obtained from taking down to a distance exc 1.50 km but not exceeding 5.00 Km out side MD land complete all as specified and as directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new plastered surface and providing 3mm thick wall care putty as per manufacturer instructions and applying two coat of oil bound distemper etc complete all as specified and as directed.

S&F rolled mild steel work conforming to Fe 410-W (Gde- E- 250) quality-A in main and cross beams, hip and jack rafters, purlins where connected to common rafters fixed with angle cleats or other connecting plates etc complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters) from the frame area n.exc 1.5 sqm etc including removing complete all as specified and as directed.

Taking down chowkats or frames with shuters (without taking of shutters) from the frame area exc 1.5 sqm but n.exc 4 sqm etc including removing complete all as specified and as directed.

S & F for 2nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and as directed.

Supply and fix 30mm thick second class hardwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed.

S&F 2nd class HW factory made 35mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats as specified in SSR Part-I, section 8, clause 8.24 (b) complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing with particle board core complete all as specified and directed.

S&F 1.25mm thick pressed steel frame door 105 X 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed.

S&F 1.25mm thick pressed steel frame door 125 X 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed.

S&F of 30mm thick flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

S&F 150 mm Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 100 mm Aluminium handles, cast type, anodised complete all as specified and directed.

S&F 150 mm Aluminium handles, cast type, anodised complete all as specified and directed.

S&F for Steel ventilator with top hung shutters including hinges and steel peg stay complete complete all as specified and directed.

S&F for Steel window with side hung shutters including hinges with steel handle and steel peg stay complete with glazing bars, dovetailed or welded complete all as specified and directed.

Ditto all as per item no 35.00 above but without glazing bars complete all as specified and directed.

S&F 4.00 mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq.m in each pane complete all as specified and directed.

S&F 4.00 mm thick figured glass, pin headed and glazing with oil putty in square n exc 0.5 sq.m in each pane complete all as specified and directed.

S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

S&F Mild steel butt hinges medium weight cold roled 100mm long etc complete all as specified and as directed.

S&F for mild steel barrel Tower bolt stove enamelled black with bright bolt (ISI marked) 200 mm long etc complete all as specified and as directed.

S&F for 300mm long mild steel sliding door bolt plate type stone enamelled black with bright bolt not less than 12mm dia and including a minimum of 6 bolts and nuts four on bolts plate and two in stagle plate etc complete all as specified and as directed.

S&F for mild steel pressed handles oval type, stove enamelled black 150mm size etc complete all as specified and as directed.

S&F stainless steel curtain rails 20mm dia approved pattern, best quality etc complete all as specified and as directed.

S&F stainless steel curtain brackets all etc as specified and as directed.

S&F stainless steel curtain side bulb etc complete all as specified and as directed.

Supply and fix mild steel works as in Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

M&L for cement concrete type C1 1:3:6 (20mm graded aggregate) as in holdfast/hollow portion of steel frame filling etc complete all as specified and as directed.

M&L for Preparing surfaces of wood and wood based materials, steel and iron work, of any description treating ends of posts, hacks of chowkats etc, area tarred exc 0.1Sqm but n.exc 0.5 Sqm each etc complete all as specified and as directed.

S&F stainless steel wire cloth galvanised 0.36mm nominal dia avg width of aperature 1.40mm fix with tinned pack or galvanised wire staple incl all cutting, wastage complete for door only etc completed all as specified and as directed.

M&L for preparation of untreated new wooden surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer etc complete all as specified and as directed.

M&L for preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

S&F framed work such as grills, gratings etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, laddors, framed balusters, walk ways, railings, framework of water tanks and similar work etc all as specified and as directed.

Dismantling water tanks and removing to site exc 250 and not exc 500 ltr capacity complete all as specified and as directed.

S&F rotational moulded PVC water storage tank 500 ltr capacity conforming to IS 12701 (1989) cylindrical vertical type multi layered with closed top including inlet, outlet and wash out holes of approved make hoisted and fixed in position all as specified in SSR Part I etc complete all as specified and as directed.

S&F 20mm brass ball valve high pressure of with polythene float and flynut complete,screwed for iron pipe or brass ferrule etc complete all as specified and as directed.

S&F PVC (SWR) Floor Trap, 75mm plain with grating incl jointing with solvant cement etc complete all as specified and as directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar etc complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floor and in paving not exceeding 15 cm thickness (below or above ground level) complete all as specified.

M&L for brick work with Fly ash bricks straight or curved on plan exc 6m mean radius built in half brick wall in cement mortar 1:4 etc complete all as specified and as directed.

M&L for brick work with Fly ash bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 etc complete all as specified and as directed.

M&L for brick work with Fly ash bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:4 etc complete all as specified and as directed.

M&L for TMT bars 10mm dia and over cut to length, bent to shape required incl cranking bending, spirally for hooping for coloumns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia etc complete all as specified and as directed.

M&L for TMT bars 6mm to 8mm dia cut to length, bent to shape required incl cranking bending, spirally for hooping for coloumns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia etc complete all as specified and as directed.

All as per item No. 64.00 here-in-before but 5 mm dia and over upto and including 10 mm dia in stirrups, spaces and binders complete all as specified and directed.

M&L granite 20mm thick for table top (moulded edges, rubbed and polished) as in cooking platforms and laid in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, the slab should be in one piece and premoulded on exposed edges iclduing drilling holes for gas tubes etc complete all as specified and as directed.

Supplying and laying of 16mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR11 fittings on walls/ceilings or layng in floors complete all as specified.

Supplying and laying of 20mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR11 fittings on walls/ceilings or layng in floors complete all as specified.

Supplying and laying of 25 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR11 fittings on walls/ceilings or layng in floors complete all as specified.

M&L for providing PCC 1:3:6, type C-2 using 40mm graded stone aggregate as in drains/surface, channels including form work all as specified and as directed.

M&L for 40 mm thick cement concrete type B1 1:2:4 using 20mm graded aggregate as in flooring finsished even and smooth without using extra cement complete all as specified and directed.

S&F 25mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and as directed.

S&F 15mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and as directed.

S&F In Bib taps, 15mm bore cast copper alloy, fancy type, chromium plated with crtuch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F 15mm Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F stop valve 15mm bore, cast copper alloy with chromium plated, long body with crtuch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

M&L for complete removal of existing treatment and providing 1mm thick wall care putty of Birla/JK White as per manufacturer instructions and applying two coat of oil bound distemper over one coat of primer on wall etc complete all as specified and as directed.

M&L for complete removal of existing treatment and providing 1mm thick wall care putty of Birla/JK White as per manufacturer instructions and applying two coats of cement base paint over a coat of primer on wall etc comnplete all as specified and as directed.

M&L for preprarion of newly plastered surfaces of walls and applying two coat of oil bound distemper over chalk whiting on wall etc complete all as specified and as directed.

M&L for preprarion of newly plastered surfaces of walls and applying two coat of cement base paint over chalk whiting on wall etc complete all as specified and as directed.

Surface dressing n. exc 15 cm deep in soft/ loose soil complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out in soft/loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and directed.

Excavation in trenches not exceeding 1.50 mtr wide and not exceeding 1.5 mtr deep for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc and getting out in soft/loose soil complete all as specified.

Ditto all as per item no. 84.00 here-in - before but exc.1.5m not exceeding 3.0mtr deep.

Excavation over area n.exc 1.5m in depth and getting out in soft and loose soil complete all as specified and directed.

Excavation over area exc 1.5m but n.exc 3.0 mtr in depth and getting out in soft and loose soil complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundation filling & mass concrete complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 cm thick in soft / loose soil complete all as specified and directed.

Removing excavated material (soil) to a distance exc 50m and depositing where directed at a level n. exc. 1.5 m above the starting point complete all as specified and directed.

Removing excavated material (soil) to a distance exc 250m but not exceeding 500m and depositing where directed at a level n. exc. 1.5 m above the starting point complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate in lintel upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs, fixing of hold fast and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete all as specified.

M&L Reinforced cement concrete 1:2:4 type B1 using 20 mm graded crushed stone aggregate in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L RCC 1:2:4 type B1 using 20 mm graded crushed stone aggregate in Columns, pillars, piers, posts and struts complete all as specified and directed.

M&L for RCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L for RCC 1:2:4 Type B1 (using 20mm graded crushed stone aggregates) as in slabs supported on walls, beams and columns in floors, canopies, deck slabs and shelves and the like complete

M&L RCC 1:2:4 Type B1 (using 20 mm graded crushed stone aggregate as in chajjas, shelves complete all as specified and directed.

Use & Waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, rough finished surface of concrete complete all as specified and directed.

Use & Waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions, rough finished surface of concrete complete all as specified and directed.

Use & Waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), rough finished surface of concrete complete all as specified and directed.

Use & Waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc rough finished surface of concrete complete all as specified and directed.

Use & Waste of formwork to chullah hoods, chajjas, troughs and similar items including edges, rough finished surface of concrete complete all as specified and directed.

M&L for rendering 20mm thick on fair faces of brick surfaces in CM 1:4 surface finished even and fair complete all as specified and directed.

M&L for two coats of cement base paint on wall, soffits of chajjas, cornices etc including prepration of plastered/unplastered surfaces complete all as specified and directed.

M&L for preparation of new surface of wall and applying two coat of white wash over a coat of alkai resistant priming paint complete all as specified and directed.

M&L for preparation of new surface of ceiling and applying two coat of white wash over a coat of alkai resistant priming paint complete all as specified and directed.

S&F roof trusses (farmed), trusses purlins, crane gantries, rails and fastenings and heavy bracket framing MS tubes medium grade as in truss, purlin, rafters, post etc fixed with and including angle cleat , MS plate etc including necessary welding, fittings etc Fe-410-W (Gde-E-250 quality-A) complete all as specified and directed.

M&L 75 mm thick PCC 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in sub base of flooring complete all as specified and directed.

M&L 150mm thick PCC 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in floor, finished even and smooth w/o using extra cement complete all as specified and directed.

S&F 100mm bore Cast iron soil sand cast pipe, soil waste and vent pipes, in any length with or without ears with cement joints, laid in trenches or in floors, complete all as specified and directed.

S&F 75mm PVC (SWR) pipe single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

S&F 75mm bore Cast iron soil sand cast pipe, soil waste and vent pipes, in any length with or without ears with cement joints, laid in trenches or in floors, complete all as specified and directed.

S&F 100mm bore Cast iron soil sand cast pipe, soil waste and vent pipes, in any length with or without ears with cement joints, fixed to walls, complete all as specified and directed.

S&F 100mm bore CI pipe single 'Y' junctions laid and jointed, complete all as specified and directed.

S&F 100mm bore CI saintary connection socket in fit WC out-let complete all as specified and directed.

S&F 75mm bore CI band (sand cast) any radius wirh oval access door including jointing with cement joints complete all as specified and directed.

S&F 100mm bore cast iron junction single, (Single T) equal or unequal, complete all as specified.

S&F 75mm bore cast iron junction single, (Single T) equal or unequal, complete all as specified.

S&F cast iron soil vent cowl bore of pipe 100mm, complete all as specified.

S&F PVC (SWR) vent cowl bore of pipe 75mm, complete all as specified.

S&F 75mm bore PVC (SWR) junction single, (Single T) equal or unequal, complete all as specified.

S&F PVC (SWR) Bends (any radius), diminishing pieces or tapers, bore of pipe 75mm, complete all as specified.

M&L for 75mm Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified.

M&L PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified.

S&F 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified.

M&L SGSW gully trap 150/150 mm, setting and jointing with cement complete all as specified.

S&F 100mm bore pipe stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed.

S&F in repairs vitreous china wash hand basin flat back basin white size 550x400mm (Oval shape) excluding taps but including CP waste coupling 32mm bore, wase pipe 610 long etc a pair of MS bracket and cutting for pinning in ends of brackets complete all as specified and directed.

S&F Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe including PVC pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed.

S&F wash down water closet vitreous china pan pedestal pattern white including plastic water closet seat white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed.

S&F for Vitreous China squatting pan, `Orrisa' pattern, size 580 x440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified and directed.

S&F PVC valveless, syphonic action type, flushing cistern low level, white, with inlet, ball valve, float and handle including brackets capacity 10 ltr with flush pipe 32 mm dia complete all as specified and directed.

S&F galvanised steel water tubing, 'medium grade' ISI marked galvanised 15mm bore, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F galvanised steel water tubing, 'medium grade' ISI marked, 20mm bore, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F galvanised steel water tubing, 'medium grade' ISI marked, with all fitting and fixed complete to walls and ceilings or laid in floors, 25mm bore complete all as specified and directed.

S&F PVC connection 15mm bore with 2 nos PTMT nuts 30cm long fixed with all as directed.

S&F PVC connection 15mm bore with 2 nos PTMT nuts 45cm long fixed with all as directed.

S&F 32mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F 25 mm Gun metal, globe or gate valves with iron wheel heads, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F 20 mm Gun metal, globe or gate valves with iron wheel heads, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F CP tubular towel rail 600 mm long and 20mm dia icluding brackets etc complete all as specified and as directed.

S&F for Soap dish brass CP with CP brass screws complete all as specified and directed.

S&F CP health faucet including holder and 1.2m long flexible pipe etc (Jaquar Model No ALD-CHR-573) complete all as specified and directed.

S&F in toilet paper holder of viterous china fixed to walls with chromium plated (CP) brass screws fixed complete all as specified and directed.

S&F Glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed.

S&F chromium plated shower roses 125 mm size with or without swivel joints of standard size including fixing to 15mm steel pipe or union complete all as specified and as directed.

M&L for Plain cement concrete 1:4:8 type D-2 (Using 40mm graded crushed stone aggregates) as in bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested for 150mm bore complete all as specified and directed.

M&L for reinforced concrete NP2 drain pipes 150mm internal dia laid in trenches and jointed complete all as specified and directed.

M&L rendering 15 mm thick in cement mortar (1:6) on fair faces of brick work or concrete surfaces finishing the surfaces fair and even without using extra cement complete as specified and directed.

M&L rendering 15 mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces finishing the surfaces fair and even without using extra cement complete as specified and directed.

M&L rendering 10 mm thick in cement mortar (1:6) on fair faces of brick work or concrete surfaces finishing the surfaces fair and even without using extra cement complete as specified and directed.

M&L rendering 5mm thick in cement mortar (1:3) on ceiling, soffits of chajjas fins etc complete as specified and directed.

M&L for rendering 20 mm thick in two layers (10+10) on other than fair faces of brick work or concrete surface in cement mortar (1:4) surface finished even & smooth without using extra cement and inluding two coats of cement base paint over a coat alkai resistant priming paint including preparing surfacecomplete all as specified and directed.

M&L for sand stone slabs on manhole covers ,landings, cover stones, templates, etc, n exc. 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and in cement mortar 1:4, complete, 5 cm thick complete all as specified and directed.

M&L for Salt glazed stone ware (SGSW) drain pipes laid in trenches and jointed as specified in 150mm internal dia of pipe grade 'A' complete all as specified and directed.

M&L for Salt glazed stone ware (SGSW) drain pipes laid in trenches and jointed as specified in 100mm internal dia of pipe grade 'A' complete all as specified and directed.

M&L for Salt glazed stone ware (SGSW) bends and tapers bends, any radius and jointed all as specified and directed.

M&L for hardcore of gauge not exc. 63mm, deposited, spread and levelling in layers not exc. 15 cm thick, watered and rammed to true surface with broken stone or boulder complete all as specified and directed.

M&L in broken bricks for hardcore of gauge not exc. 63mm, deposited, spread and levelling in layers not exc. 15 cm thick, watered and rammed to true surface with broken bricks complete all as specified and directed.

M&L for 75 mm thick plain cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in plinth protections, finished even and smooth w/o using extra cement with joints 10 mm wide and in full depth at corners and @ 3.0 m c/c filled with mastic mortar complete all as specified and directed.

M&L for sand filling under floor or in foundations including watering and consolidation all as specified and directed.

M&L Brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick honey comb walls, built in cement mortar 1:4 complete all as specified and directed.

M&L for broken bricks loose filling with aggregates of gauge 80 to 150 mm in soakage pits, soakage wells complete all as specified and directed.

S&F Cast iron work grade FG 150, Articles n exc 5 kg each eacunmachined, in brackets, gully traps, gratings, railing, frames, manhole covers, fire and soot doors, dampers, stop valve boxes, gate stops, parts of ranges, balusters and similar articles complete all as specified and directed.

Use & Waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 5cm but n exc 10cm wide, rough finished surface of concrete complete all as specified and directed.

M&L for 20-25mm thick machine cut kota stone slab in floors etc. over screed base laid and jointed with gray cement slurry mixed with pigment to match the tile complete all as specified and directed.

Cutting into existing manhole for connecting new drain pipe of 100 mm bore and making good to pipe and rendering disturbed surface where drain pipe have been insereted cutting out existing benching for forming branch channel (1/2 round or 3/4 section as required) in cement concrete 1:2:4 type B1 and finished the surface even and smooth and reforming benching as required complete all as specified and directed.

S&F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed.

M&L for posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc.,and similar work conforming to Fe-290 Gde E-165 complete as specified and directed.

Supply only galvanised chain link fencing of size 100mm x100mm mesh made out of 10guage mild steel ganvanised wire complete all as specified and directed.

Fixing only chain link fencing including line wires any mesh size and type to any type of standards rails, straining bolts, etc including provision of binding wire etc complete all as specified and directed.

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long complete all as specified and directed.

Supply only mild steel in flat, round or square bars, in available lengths as in line wire Fe 410-W(gde-E-250) quality-A complete all as specified and directed.

S&F 15mm bare CP angle stop cock fancy type concealed type.

S&F 10mm bare for asbestos cement pipes in any legth with cement joints fixed to walls complete all as specified and directed.

M&L for providing precast cement conncrete PCC 1:2:4 type B1 (20mm graded stone aggregate) as in landings, coverslabs (for manholes etc)

SCHEDULE 'A' PART-II (E/M WORKS)

Taking down carefully existing copper/ aluminium point wiring (light, fan, buzzer, socket or power) complete including fixture and fittings such as switches, ceilling roses, pendants, regulators, sockets light fitting etc for taking credit removing from site and making good disturbed surface of walls, floors etc as per existing specification complete all as specified and as directed.

Taking down carefully existing unservicable DB, switch fuse unit, enclosure for MCB DB (inclusive of MCBs of any type and capacity) and making good disturbed surface all as specified and as directed.

M&L for concealed point wiring One light point/one fan/light/exjaust/bell point controlled by one switch with FRLS PVC insulated unsheathed multistranded copper conductor cables 1100 Volts grade of 1.5 sqmm size alongwith one earth continuity conductor with FRLS PVC insulated unsheathed multistranded copper conductor cable 1100 Volts grade of 1.5 sqmm size through and including 20 mm dia (medium grade) rigid non metallic PVC concealed conduit terminated in and including pressed steel sunken boxes , readily available (Having wall thickness not less than 1.22 mm for boxes upto a size of 200 mmX300 mm and beyond that the wall thickness shall be not less than 1.63 mm) concealed type with 3mm thick bakelite sheet cover for fixing of switches, sockets, fan regulators etc including testing on completion complete including cutting chases for concealed conduit pinning in making good to facing and pointing in using cement mortar 1:3 and making good to disturbed surface all as specified and directed.

All as per item No 1781.00 here-in-before but One 3 pin socket outlet, 5 Amp on independent board all as specified and directed.

All as per item No 178.00 here-in-before but One 3 pin socket outlet, 5 Amp on same board all as specified and directed.

All as per item No 178.00 here-in-before but for one 15 Amp 3 pin switch socket outlet, independent with 2.5 Sqmm single core multi-stranded copper conductor cable (FRLS) along with 2.5 sqmm continuous PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable for earth continuity wire complete all as specified and as directed.

S&F Switch piano, flush button type, single pole, one way 6 Amp, 230 volt complete all as specified and directed.

S&F Socket outlet 2 in 1, 3 pin, 5 Amp complete all as specified and directed.

S&F switch socket outlet combination 2 in 1, 5 amp, flush piano universal type controlled by one switch conforming to IS complete all as specified and as directed.

S&F switch socket outlet combination 5 in 1, pin 5/15 amp, flush piano universal type controlled by one switch conforming to IS complete all as specified and as directed.

S&F ceiling rose surface bakelite three terminals complete all as specified and as directed.

S&F ceiling fan regulator electronic stepping type, SP 230 volts, suitabe for 1200mm / 1400mm sweep ceiling fan inliding necessary electric connection complete all as specified and directed.

S&F LED Neo tube light fitting 1x 18W, 230 V, with tube 4 feet wall mounted LED batten ultra bright LED polycarbonate tubelight with very high efficency suitedfor installation existing T8 tubelight with G13 lamp holders to give glare free light complete all as specified and as directed. (Make Crompton/ Havells/ Bajjaj/ Philips)

All as per item No 188.00 here-in-before but 9 watt 2' feet long all as specified and directed.

S&F of recessed mounted LED 12 watt luminaire suitable for armstrong/ grid ceiling with its super bright LED 12W all pre wired including connection with twin core flexible PVC 0.5 sqmm complete all as specified and directed.

S&F Building security LED light luminaire fitting 1X20 W new generation energy saving & envoirmental friendly long life versalite pressure die-cast aluminium IP66 roadway luminarie with high power LEDs as light source and electronic driver with 1.5m long and PC cover having top openning opreate driver compartment all as specified and as directed. (Make Crompton/ Havells/ Bajjaj/ Philips)

S&F ceiling fan 5 star (ISI Marked) 1200 mm sweep 230 V SP including Fan regulator electronic step type not less than 100 watt complete with accessories and connection with ceiling rose with MS hooke made out of ms flat iron size 25 X 5 mm for hanging of suitable length complete all as specified and as directed.

S&F exhaust fan AC single phase 240 V of size 300 mm sweep metal body finishing of disturbed surfaces matching with the exisitng surfaces, necessary fixing arrangements such as fastener bolts, nuts, washers etc; of appropriate size complete all as specified and directed. Make : Havells / Bajaj / Philips

S&F Sheet metal enclosure for MCB, DBs, phosphatised, power coated, single door single pole & Neutral 8 way 240 volt with common bus bar at incoming end complete all as specified and directed.

S&F Sheet metal enclosure for MCB, DBs, phosphatised, power coated, single door single pole & Neutral 4 way 240 volt with common bus bar at incoming end complete all as specified and directed.

S&F single pole and neutral enclosure with a two pin and earth plug socket with single pole one MCB of 16/25 amp complete all as specified and directed.

S&F MCB double pole 6 to 32 Amps, breaking capacity 10KA, 240 Volts 'C' curve all as specified and directed.

S&F MCB single pole 240 volts, 06 to 32 Amps, breaking capacity 10KA, 240 Volts 'C' curve all as specified and directed.

S&F MCB single pole 240 volts, 40 to 63 Amps, breaking capacity 10KA, 240 Volts 'C' curve all as specified and directed.

S&F Geyser 25 ltr capacity vertical type with BEE 5 star rating, having working pressure 8.0 Kg/cm² (max), electric water heater with ABS cover outer body 3mm EPAC (Engineered Polymer Anti Corrosion) coated inner tank to suit any kind of water, interchangeble colour panel, vitreous enamel coated incoloy heating element for long life, adjustable capilary thermostat for temparature regulation, multifunctional safety valve, hot and cold water CP flexible pipe etc and fixing along the wall complete all as specified and directed. (Make:- USHA, Model Mystry or equivalent model of V-Guard / Recold / Havells / Bajaj)

M&L for Advance Maintenance Free G.I. SAFE EARTHING Electrode with PIPE of not less than 50 mm outer dia( THICKNESS NOT LESS THAN -2.5MM) and two meter length, The electrode should be of galvinised (80 -100 micron) along with earth lead as Galvanised steel strip of size 32 X6 mm 7.5 m. The GI Electrode shall be pre-filled with Cristaline Conductive Material (CCM). The GI electrode shall be surrounded with 25 kg BackFill compound to provide maximum contact between the electrode and Back Fill Compound. Backfill compound should be eco-frendly and having RoHs certification. GI Electrode Shall be tested from CPRI. The earting pit should be cover with PCC (1:2:4, type B-1) cover, of 450 x 450 mm complete all as specified and directed. (Make: ASHLOK / INDELEC / JMV / TERCEL).

Taking down carefully existing unservicable/ faulty cable any size from trench / pole all as specified and as directed.

M&L for XLPE insulated GI wire/strip armoured electric power cable (Heavy duty) ISI marked with stranded aluminium conductor 1100 volts grade, cross sectional area 10 Sqmm 2 core laid in trenches /poles/on wall complete including necessary cable glands, aluminium lugs duly crimped, termination etc all as specified and directed.

M&L for XLPE insulated GI wire/strip armoured electric power cable (Heavy duty) ISI marked with stranded aluminium conductor 1100 volts grade, cross sectional area 16 Sqmm 2 core laid in trenches /poles/on wall complete including necessary cable glands, aluminium lugs duly crimped, termination etc all as specified and directed.

M&L for XLPE insulated GI wire/strip armoured electric power cable (Heavy duty) ISI marked with stranded aluminium conductor 1100 volts grade, cross sectional area 25 Sqmm 3.5 core laid in trenches /poles/on wall complete including necessary cable glands, aluminium lugs duly crimped, termination etc all as specified and directed.

M&L sand cushioning (dry) in trenches for protection of UG cables (below, above and around the cable laid in trenches) of 230mm spreding thickness and consolidated (punned) upto 180mm thickness complete all as specified and as directed.

Supply & Laying Sub Class 'B' Bricks,old size, well burnt, laid breadth wise along the length of cable laid in trenches over sand cushion for UG cable protection complete all as specified and directed.

Material and labour for galvanized iron tubing 50mm bore light grade with all fitting for protection of cable, laid in trenches/wall/floor incl necessary clamp, bolt/nut if any all as specified and directed. (Note: Excavation, earth work shall be measured and paid separately)

Cutting Chases pinning in, for concealed conduit wiring and making goods of disturbed surface not exc 15 cm girth complete all as specified and directed.

Cutting opening in cement concrete walls (any descript-ion) for door, window and other openings (with or without reveals) or enlarging existing openings, including trimming surfaces to receive rendering, etc. all as directed.

M&L for sub main wiring with 2 run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6 sqmm alongwith one run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6 sqmm as earth continuity conductor drawn through PVC conduit ISI marked complete all as specified and directed. Note :- (a) PVC Conduit/PVC casing caping shall be included in same rate. (b) For concealed sub-main wiring cutting chases shall be included in rate. (c) All the incomming and outgoing cable should be connected throgh proper lugs & sockets as per site requirement)

M&L for sub main wiring with 2 run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4 sqmm alongwith one run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4 sqmm as earth continuity conductor drawn through PVC conduit ISI marked complete all as specified and directed. Note :- (a)Taking down of old wiring/PVC Conduit/PVC casing caping shall be included in same rate. (b) For concealed sub-main wiring cutting chases shall be included in rate. (c) All the incomming and outgoing cable should be connected throgh proper lugs & sockets as per site requirement)

(Note : The Scope of Work contained in 'Sch of Credit' amounting to Rs. 20,921.00 (refer Tender Srl Page No 48). The Quoted sum shall be arrived at after deducting the amount of “Sch of Credit” from the total amount of the ‘BoQ’

Paritosh Saha

M/S JANATA CONSTRUCTION

M/S Joy Construction