INSTALLATION MOTOR & PIPE LINE & SYSTERN TANK WARD NO 34 RS NO 149 PLOT 81 AKHILA BHARATH VEERASHIAVA LINGAYATH MAHASAB SAMUDAYA BAHAVAN AT GADAG BETAGERI CMC LIMITS

INSTALLATION MOTOR & PIPE LINE & SYSTERN TANK WARD NO 34 RS NO 149 PLOT 81 AKHILA BHARATH VEERASHIAVA LINGAYATH MAHASAB SAMUDAYA BAHAVAN AT GADAG BETAGERI CMC LIMITS

Cleaning of borewells including yield testing of borewell either using slow or fast rigs for not more than 2 hours at the final depth with a minimum working of 2 hours continuously with air compressor...

Providing, supplying to work site, fixing of Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well and confirming to IS 8034 specifications, with testing of as per instructio...

Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments. As Per ...

Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog ...

Labour charges for Erection, Electrification and commissioning of Pump ets,including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well caps,...

Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness in average +5%...

Digging of trench of 0.6m deep x 0.50 mtr wide refilling the trench to the required ground level and consolidating etc., complete.(As per Civil SR KSRB I-2, P-7) As Per Electrical SR 2019-20 P.No-41 S...

Supply and delivery at site wrought middle steel (galvanized) GI hexagonal nipple confirming to IS 1239-II, 1991 with latest amendments if any. As Per CSR for Water Supply & Sewerage Works 2023-24 Pag...

Labour charges for laying of 1.1 kv class UG cable in existing trench GI pipe / stoneware pipe / on wall / on pole as required. In existing trench / duct. 25 sqmm to 75 sqmm … incluidng cost of all ...

Supply and fixing of Energy Meter as per direction of engineer incharge of work. Including Fixing Space For HESCOM Energy Meter, Deposit, Meter cost, test Report & agreements Wiring etc . Complete

Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...

Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technical specifications, inc...

Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak p...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...

KSRB 13-11.1 : Providing and placing on terrace, polyethylene water storage tanks with manhole lid and suitable locking arrangements, making holes of suitable diameter for inlet, outlet and over flow ...

Supply and delivery at site special moulded variety PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments For 40 mm dia PVC Elbows each As Per CSR ...

Supply and delivery at site special moulded variety PVC tee as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments For 40 mm dia PVC Tee As Per CSR for Water S...

Supply and delivery at site special moulded variety PVC bend as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments For 40 mm dia PVC BEND As Per CSR for Water...