KALAIGNAR NAGARPURA MEMPATTU THITTAM 2023-24

Amount

Earth work excavation for foundation and depositing on bank with in the initial lead of 10m and a lift of 2m in hard stiff clay, stiff block cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders etc. complet

Earth work excavation in all class of soils except hard rocks requiring blasting such as hard stift clay cotton hard earth shales murrams gravel stoney earth and earth mixed with small size with initial lead and lift including all incidential charges such as removing boulders sharing, strutting, watering bailing out water it necessary including all labour charges etc., Complete for foundation.

Collection, supply and filling with well gravel including cost and conveyance of all materials and stacking them at road side to departmental gauge for pre-measurement including all labour charges for filling etc., complete as per standard specification.

Supplying and filling in foundation and basement with filling sand in layers of not more than 15 cm thick well rammed consolidated etc. complete complying with standard specification and as directed.

Cement Concrete 1:4:8 Mix (one part cement, four part sand and Eight part of aggrigate) using 40 mm size ISS HBG metal from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing. Laying and curing etc. complete. Complying with std. specifications.TNDSS NO 28 V, VI(S2) V, VI(S5A) VII

Supplying and erecting centering for sides and soffits including supports and strutting up to 3.29mm height for plane surfaces in all floors with cross bracings using mild steel sheets of size 30cm x 55cm and 10 gauge stiffened welded with mild steel sheets of size 25mm x 25mm x 3mm for boarding and laid over silver oak (country wood). Joists of size 10cm x 6.5 cm dia spaced at about 90cm centre to centre and supported by casurina props of 10cm to 13cm dia spaced at 75cm centre to centre etc complete complying with standard specification TNDSS No. 30 &86

Centering for Beams

Column

Vibrated Reinforced Cement Concrete 1:1½:3 Mix (One part cement, one and half part sand and three part of aggregate)using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing but excluding cost of reinforcement etc. Complete with std. Specifications.(using vibrater)(TNDSS No.30 V,VI (S3) VII-3

Up to Basement

Up to Ground Floor

Supplying fabricating and placing in position of TMT steel rods including cost of binding wire, cost of labour charges for fabrication and placing in position etc. Complete. Complying with std. specifications. TNDSS No,97 V,VI (S6) VII (S6) VII-3

Plain Cement Concrete 1:2:4 Mix (one part cement, Two part sand and Four part of aggrigate) using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications. TNDSS No.24

Brick Work in Cement Mortor 1:5 Mix (one cement, five sand) using new best fly ash Bricks of size 9 ” x 4 3/8 “x 2 3/4 ” from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications.

Up to Basement

Up to Ground Floor

Supply and fixing of ISA equal angle for truss including cost of Material conveyance of all material, fabrication and fixing charges etc.Complete as per ISI with rust preventive primer & ready to assemble condition for easy installation at site including dismantling making necessary with power drill to the accessories such as supplying and fixing holdfasts, plastic bush inserts receiver runner bottom shock absorbers etc. Complete as Directed by the Departmental Officer.

Plastering with cement mortar 1:5 mix (One cement and five crushed stone sand ) to 12 mm thick including curing cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification

Painting two coats with ready mixed Plastic Emulsion Paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete

Painting Two coats for new iron work over existing priming coat using departmental approved colour & quality of ready mixed synthetic enamel paint, including cost of all materials, all labore charges, etc., complete.

Supplying and fixing of M.S.grill of approved design for doors. Windows and ventilators using necessary mild steel flats for inner and outermembers which should be fixed to window frames inclusive of priming coat of best approved quality red oxide primer etc., complete complying with standard specifications.

Fabricating supplying and fixing of pre painted galvanized iron sheets with the following specification. The materials should be of PPGI tile profile with a red colour or any other approved design 0.47 mm thick 24 guage having width 1050 mm. The sheet should be G.I.base pre painted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws,plastic washer.The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with zinc coating of Z 120 GSM paint thickness the finish should be terra cotta finish like malabar mangalore tiles finish optional matt finish. The sheet to be fixed with making suitable corrugated,cutting the sheet in to the required ssize and making ornamental designs as per the site condition and as directed by the departmental officers.

Providing and laying, spreading and compacting graded stone aggregates to Wet Mix Macadam 250mm thick specification including premixing the materials with water at OMC in mechnanical mix plant carriage of mixed material by tipper to site laying in uniform layers with pavers in Sub Base/ Base course on well prepared surface and compacting with vibratory roller to acheive the desired density including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as per clause 406 of MORTH

Rubberised Interlocking Paver Block M40 grade providing and laying of 83 mm thick heigh strength type confiriming IS 15658 - 2006 of Rubberised Interlocking Paver Block in required size of mininmum compressive strength of 40N/mm2 in uniform shape of approved make to be laid in flumying bore pattern with approved nin - sticking surface in the top and the rate including levelling the base Stone dust cushion 100mm thick laying out the pavement cut the pieus to fit edge, vibrating pavers, sweeping transporting leading unloading as per standard specification.

Supply and fixing of Horizontal Three Phase Distribution Board with MCBS AC supply suitable for both lighting and Motor Circuits including cost of conveyance of all materials to working site and all labour charge etc, complete complying with STD specification. SD 167 8 ways 3 phase DB

Wiring with 2 x 22/0.3mm PVC insulated multistrand copper conductor cable of 1100V grade in suitable PVC rigid pipe Open in wall and ceiling with PVC accessories in flush with wall and covered with hylum sheet of 3mm thick with TW switch box of 150mm x 100mm x 113mm for5 5A 3 pin nin-interlocking flush type CS plug with continuous earthwire connection of 14 SWG TC wire and making good of the Open portion with suitable colour for cealed plug point.

Supply and fixing of 3 Nos. 5A (3 pin and 2 pin) combined flush type wall socket with control switches Open in suitable TW box covered with hylem sheet in flush with wall with earth connection (for computer plug socket) (SD 139)

Supply and run of 2 of 1.5 sq.mm. (22 / 0.3) PVC insulated single core unsheathed copper conductor of 1100V grade in suitable heavy gauge MS conduit pipe Open in wall and ceiling with continuous earth wire connection of 14 SWG TC wire and making good of the Open portion with suitable colour (SD - 43)

Provision for 25W LED Focus Light for Outer Passage Which includes all cost and Conveyance and Labour Charges etc,. Complete.

Supply and fixing of GI steel tubular pole for street light of 6 Metre Length Single Bracket Pole with Base Plate (250 x 250 x 6mm) 76.10mm OD x 3.65mm Thick x 6000mm Length etc., complete.(PWD SOR 21-22 Pg.No:148 Item No : XV 1.b)

Supply and fixing of 30 watts LED out door street light fitting with LED etc., complete (PWD SOR 21-22 Pg.No:115 Item No : 17 a)