Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.0 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | l2₹35.2 L+₹1.7 L (5.12%)Rejected-Finance PEMASAR ROAD WARD NO 04 UDASAR BIKANER RAJASTHAN 334022 | BIKANER | RAJASTHAN | 334022 | l2 | Rejected-Finance Other than lowest bidder | |
| 3 | L3₹36.6 L+₹3.1 L (9.26%)Rejected-Finance H NO 02 SAGAR ROAD OPPO MKD GIRLS SCHOOL TILAK NAGAR BIKANER 334001 | BIKANER | BIKANER | RAJASTHAN | 334001 | L3 | Rejected-Finance Other than lowest bidder | |
| 4 | L4₹37.9 L+₹4.4 L (13.2%)Rejected-Finance | L4 | Rejected-Finance Other than lowest bidder | |
| 5 | L5₹39.4 L+₹6.0 L (17.8%)Rejected-Finance PLOT NO 46 WARD NO 08 OPPOSITE RADIO TOWER SAGAR ROAD TILAK NAGAR BIKANER 334003 RAJ | BIKANER | BIKANER | RAJASTHAN | 334003 | L5 | Rejected-Finance Other than lowest bidder |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
27 Feb 2021, 6:00 pmClosed
GE (N) Bikaner
GE (N) Bikaner Mil Stn Bikaner
REPAIR TO FOOTPATH, DRAIN, CHAINLINK FENCEING, HARDSTANDING BOUNDARY WALLS, CULVERTS AND OTHER MISC ITEMS UNDER GE(N) BIKANER AT MIL STN BIKANER
2021_MES_417428_1
GE (N) BKN-Token/64/2020-21
Open Tender
Civil Works
Item Rate
330 days
GE (N) Bikaner
Class D Category a (i)
8 documents required · 8 mandatory
₹500
GE(N) Bikaner
₹80,000
Yes
21 Jul 2021
30 Jan 2021
1 Mar 2021
30 Jan 2021
27 Feb 2021
13 Feb 2021
Amount
Dismantling structural steel work including door gates etc complete all as specified as directed by Engr- in- charge.
Dismantling fencing wire, any type complete all as specified and directed .
Dismantling posts or struts (wood, steel or RCC), any section, including taking out embedded portion and making good disturbed ground, posts embedded in concrete, brick work, masonry, etc complete.
Demolition of brick work built in cement or cement lime mortar complete.
Demolition of cement concrete (unreinforced) in ground floors and paving exceeding 15cm thickness but above above ground floors complete.
Demolition of cement concrete (reinforced) as in any description and in any position not otherwise specially provided complete.as directed by Engr- in- charge.
Taking down cement or cement lime plaster, any description, on brick or stone walls etc. including raking out jopints, hacking for keys, scrubbing down with water etc complete.
Trellis work (jafri), including taking as under of battens of trellis (posts and rails measured separately)
M & L for Cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate in foundations, filling and mass concrete including sub base of floors complete.
M&L for 75mm thick cement concrete 1:4:8 type D2 using 40mm graded stone aggregate in sub base in floors and paving ,laid in panels and finished even & fair compete.
M&L 60mm thick factory made coloured glazed precast concrete interlocking paver block of grade M-35 confirming to IS 15658-2006 manufactured by vibratory process laid over sand cushioning complete all as specified & directed.
M&L 80mm thick factory made colored glazed precast concrete interlocking paver block of grade M-40 confirming to IS 15658-2006 manufactured by vibratory process laid over sand cushioning complete all as specified & directed.
M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80mm thickness ,M-40 Grade using grey cement and pigment vibratory process laid over sand cushioning complete all as specified & directed. complete .
M&L for sand filling under floors, cushning under interlocking tiles or in foundations incl watering and consolidations complete all as specified and directed.
M&L for PCC 1:3:6 cement concrete type C-1using 20mm graded stone aggregate in surface channles and drains and inside the manhole finished the surface of even and fair complete .
M&L for cement concrete 1:2:4 type B-0 using 12mm graded stone aggregate in coping or roof kerbs ,rounded or chamfered on edges and kerb stone including necessary form work complete .
M&L for 75mm thick Cement concrete 1:3:6 type C2 using 40mm graded stone aggregate in plinth protection, , finished even and smooth using extra cement , laid in panels including making joints 12mm wide to the full depth of PCC at every 3 metres and at every change of direction and filling the same with & including bitumen and sand 1:3 by weight complete.
M&L for PCC 1:5:10 type D-2 using 40mm graded stone agg as in mass filling foundation .
M&L for pre cast RCC jali 35mm thick in PCC 1:2:4 type B0 using 12.5 mm graded stone aggregate set and jointed in CM 1:6 incl dismentling of old jali all as specified.
Add extra for forming fair finished drain or channel exc. 30cm inner girth in cement concrte using extra cement including forms ,moulds ,mitred /stopped ends etc complete for each 25mm girth or part therof over 30cm .
M&L providing reinforced cement concrete type B1 , 1:2:4 (20mm graded aggregate) in precast post for securing RCC jali post straining or terminal post struts etc for fencing average sectional area not exc 100 sq. cm height up to 70cm , with or without chamfered angles and flat splyed, rounded or mitred tops as directed and fixed.
M&L cement concrete 1:2:4 type B-1, using 20mm graded stone aggregate in any thickness,in flooring/hardstanding complete all as specified & directed.
M&L Forming 12mm thick expansion joint filled with pre-formed bituminous filler and top 30mm primed and sealing compound grade 'A' complete all as specified & directed.
M&L Chequerred cement concrete tiles 30 cm x 30 cm x 25 mm rubber finish glazed top thick with grey cement and pigmet machine pressed, set, jointed and pointed in neat cement slurry in floors over and including 20 mm thick screed bed in cement and sand mortar 1:6 complete
M&L for PCC 1:2:4 Type B0 (using 12.5mm graded stone aggregates as in bands, plinth course, parapets and raillings kneelrs apex stone bed plates, kerbs stones, kerbs and the like including weathering slightly rounded or chamferd angls and throating as directed by Engr-in-charge.
M&L Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, ladders etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing of GDE Fe410-0 or Fe 310-O complete
Excavation in post holes (or similar holes) in loose/ soft soil each not exceeding 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exeeding 25cm, watering and removing surplus soil to a distance not exceeding 50m and making good surface complete.
M&L for Mild steel work conforming to Fe-290 Gde E-165 in nosing to steps including embeding in concrete and screwing etc, wind ties for roof including securing bolts, posts & struts in fencing including cutting top to shape as directed, drilling holes, notching for wire, etc, flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc complete.
M&L mild steel round bars 10 mm dia or over, cut to length, bend to shape required, fixed independently to support chain link fencing complete all as specified. Fe 410-0 or Fe 310-0
Supply and Fixing mild steel work as in flats , ties, straps etc.
M&L for Mild steel screw bolts (machine made) with hexagonal or square head at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, not exc 75mm long and dia of shank 11 to 15mm complete.
Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rail, straining bolts, etc including provision of binding wire complete.
Supply only chain link mild steel galvanized fencing, any type or size complete.
S&F Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm to 80mm spacing and straining and ixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc as directed complete.
M&L for preparing new or previously untreated steel and iron surface of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over & including a coat of red oxide zinc chrome primer complete.as specified as Eng in charge
M&L for preparing new or previously of brick wall / concrete surface including cornice plaster etc applying two coats of synthetic enamel paint over & including a coat of suitable primer complete.as specified as Eng in charge
M & L Preparation of old concrete surface , wall including cornices, pilasters etc of any description, not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint complete all as specified and as directed by Engr-in-Charge.
M&L Mild steel framed work as in grills, grating and gate etc with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, conforming to Fe-410-0 nor Fe-310-0, complete all as specified and directed by Engineer-in-Charge.
M&L Brick work with fly ash bricks (old size) straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified
All item as above 39 item No. here in before but except bricks as complete as directed by engr in charge
M&L Brick work with fly ash bricks (old size) straight or curved on plan to any radius in half brick thick walls built in CM 1:6 but except Bricks complete all as specified and directed.
M&L for 15mm thick Rendering in cement mortar 1: 4on fair faces of brick work or concrete surfaces, finished even & smooth without using extra cement as complete as specified per manufacturer instruction all as specified
M&L for Preparing new plastered or unplastered surfaces of walls and applying two coats of cement paint white or tinted over a coat of primer as per manufacturer's instructions complete.
M & L RCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in precast cement concrete, manhole covers including all use of forms, moulds or machine moulds and setting the blocks, slabs etc in cement mortar 1:4,complete all as specified and directed. (Reinforcement shall be measured and paid separately under respective item of schedule "A")
M&L for Mild steel TMT bars 10mm dia and over as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete.
M&L Thermo plastic road marking 2mm thick (lines, dashes, arrows, letters etc on wall, pavements and the like) with road safety spikeries glass beads 8% incl preparation of new or previously treated road surface by using special applicator machine with heating arrangement upto 160 Degree centigrade complete all as specified.
M&L for pothole ready mix road repair patching compound Premix of standered grade of 50kg each bag incl laying, ramming rolling etcall as specified and directed by Engineer In charge and as approved by Garrison Engineer before execution at site
SUBHAM ENTERPRISES
SHREE GURU NANAK CONSTRUCTION COMPANY
m/s gharu constrution company
M/S BUDHRAM BISHNOI
M/S ASHRAFI CONSTRUCTION CO
M/S BIKANER CHEMICAL LABORATORIES
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .