79/EEC/BSNL/CD/BGL/2023-2024

Amount

Demolishing lime concrete manually/ by mechanical means and disposal of material within 50 metres lead as per direction of Engineer in-charge

Making holes upto 50mm dia. in brick masonary walls with power operated drill machine for all lift including removing debris and dust etc. wrapping a foam sheet on PVC pipe embedded in brick wall applying bitumastic primer etc. complete as directed by engineer-in charge.

Cutting holes up to 30x30 cm in walls including making good the same:

With common burnt clay F.P.S. (non modular) bricks

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work up to plinth level :

1:5:10 (1 cement : 5 fine sand derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources)

Dismantling ceramic tile flooring laid in cement mortar including stacking material within 50 metres lead.

Ceramic Tiles up to 8mm thick

Dismantling old plaster/tile daddo or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.

40 mm thick with 20 mm nominal size stone aggregate

Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement.

18 mm thick

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.

Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing and filling light weight cinder in sunken portions etc. complete as per directions of E-I-C (Nominal size 20mm)

Providing and fixing on wall face unplasticised Rigid PVC SWR pipes conforming to IS : 13592 Type-B, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion

110 mm dia pipe

75 to 80 mm dia pipe

Providing and fixing rigid SWR UPVC fittings for PVC pipes of approved quality as directed by Engineer-in-charge.

PVC reducer collar 110x75mm

PVC plain/reducer collar 75x38mm

PVC Reducer TEE-100X75mm

PVC plain/shoe bend-110mm dia.

PVC plain/shoe bend-75mm dia.

Providing and fixing PVC-SWR floor trap of self cleansing design with Stainless steel grating over top inlet complete, including cost of cutting and making good the floors :

100 mm inlet and 75mm single outlet

100 mm inlet and 50mm multi outlet

Dismantling C.I. or asbestos or PVC rain water pipe with fittings and clamps including stacking the material within 50 metres lead

100 mm dia pipe

75 to 80 mm dia pipe

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :

15 mm nominal bore each

Providing and fixing half stall urinal of size 580x380x350 mm with ABS spreaders and SS waste coupling including dismantling old damaged urinal pans with screws/dowels without damaging wall and dispposal of rubbish providing complete as directed by Engineer-in-charge (Note- Rate shall be quoted excluding cost of flushing cistern, CI trap etc.)

Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in-Charge.

Providing & fixing White vitreous china water closet squatting pan (Indian type) with 10 litre low level white P.V.C. flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete but excluding "S" or "P" trap including cutting and making good the walls and floors wherever required:

White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :

W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:

White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap

Providing and fixing wash basin white vitreous china oval shaped (counter top type) wash basin of specified size with single 15 mm C.P. brass pillar tap and SS waste coupling in the existing granite/marble top opening as directed. (the rate quoted shall be excluding CI bracket or Rack bolt)

wash basin size 550x430x200mm

Dismantling old/damaged Wash basins of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in-Charge.

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete

Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge.

Cutting chase in the existing door frame in position with power cutting saw and chiesel to insert new shutter for change of shutter opening face etc.

door up to 2.0sqm area

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :

250x16 mm each

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :

Making connection of CPVC distribution branch with G.I. main of following sizes by providing and fixing tee, threading the pipe including cutting and fixing with CPVC solvent cement etc. complete :

25 to 40 mm nominal bore

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall

20 mm nominal dia Pipes

40 mm nominal dia Pipes

40 mm nominal dia Pipes

Providing and fixing CPVC gate/ball valve with handle of approved make (astral/ashirwad or equivalent)

20 mm nominal dia Pipes

40 mm nominal dia Pipes

Supplying & fixing CPVC Union of following size etc

Union 40 mm nominal bore

Dismantling 15 to 40 mm dia CPVC/PVC pipe and clamps including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineer-in-Charge. (a) Internal Work- Exposed on wall

Providing and fixing Stainless steel grating of approved quality and colour.

100 mm nominal dia. circular type

Providing and fixing C.P. brass water supply fittings with Wall Flange of approved quality and brand

15mm nominal bore C.P. brass 2-Way bib cock of approved make

Pillar tap with foam flow of approved make

Providing and fixing on wall face Health Faucet of ABS Body including 1.20 Meter Long PVC flexible pipe & Wall Hook

Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth.

Granite Stone of approved shade

Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.

Dismantling 1mm thick MS sheet insulation ceiling with glass wool insulation between M.S. Sheet and aluminium sheet and finally the frame work of steel section supporting ceiling by cutting MS sheet with grinding blades along the welded grid, removing glass wool layer

carefully with aluminium sheet at top, cutting the MS frame work supported on walls with Oxyacetylene gas cutter and exhaust pipes laid above ceiling complete as directed by Engineer in charge fro ground floor gents toilet and stacking of material within 50m lead.

3220mmx 5300mm ceiling area of toilet

Taking out doors frames (PVC) including removing screws, wedges, and embeded portion in floor etc.stacking within 50 metres lead :

Of area 3 sq. metres and below

Providing and fixing PTMT stop cock of approved quality and colour.

15 mm nominal bore, 86 mm long, weighing not less than 88 gms