S/R to MV-30 to MV-29 Road for the year 2025-26

Cleaning the existing black topped surface including removal of binging materials with wire brushes and small picks, sweeping with booms or soft brushes and finally dusting with old gunny bags and/or compressed air to receive bituminous materials etc complete as per the direction of engg in charge.

Providing and laying Water Bound Macadam (WBM) grading of coarse aggregate confirming to table :400.7 & 400.8, in compacted layers as per the specifications.( With Crushable Moorum & as per direction of EIC (Grade-II with crushable Moorum)

Providing & applying primer coat with Bitumen emulsion on prepaired sueface of granular base including cleaning the road surface and spraying primer @ 0.60kg / sqm using mechanical means as per clause 502 of MoSRT & H specification for road & bridge works etc complete as per direction of EIC.

Providing & applying tack coat with Bitumen emulsion using emulsion pressere distributer @0.20kg / sqm on the prepared bituminous / granular suerface cleaned with mechanical broom as per clause 503 of MoSRT & H specification for road & bridge works.

Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates using VG-30 penetration grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of Type C as per Technical Specification Clause 508 of MoRD by manual means i.e.,without paver finisher

Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type B as per Technical Specification Clause 510 of MoRD with VG-30 gradebitumen laid by manual means I.e., without chips spreader

Please Enable Macros to View BoQ information