SPL REPAIR TO KP 09A TO KP 09D AND EXISTING FENCING AT CHILDREN PARK AND PROVN OF CERTAIN REVENUE WORKS AT SEVOKE MIL STN UNDER GE SEVOKE ROAD

Amount

M&L for screed bed or bedding layer of cement mortar 1:6, 15mm thick for laying floor finishes complete all as specified and directed.

M&L for screed bed or bedding layer of cement mortar 1:3, 10mm thick for laying floor finishes complete all as specified and directed.

M&L for rendering in CM (1:4), 10mm thick on fair faces of brick work or concrete surfaces for fixing of wall tiles complete all as specified and directed.

M&L for rendering in CM (1:4), 15mm thick on fair faces of brick work or concrete surfaces for fixing of wall tiles complete all as specified and directed.

M&L for glazed coloured ceramic tiles of size 450mm x 350mm x 7- 8mm thickness in vertical surfaces set and jointed in neat cement slurry and pointed in coloured cement to match the surface complete all as specified and as directed

M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the surfaces complete all as specified.

Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc 15 cm thickness (below or above GL) complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position (RCC water tank, kitchen chimney etc) complete and removing the retreived debris out side MD land, complete all as specified and directed.

Dismantling floor, hearth or wall tiling and stone slabs including cement mortar bedding (but not backing), removing rubbish off the premises outside MD Land complete all as specified and directed.

M&L for 25mm thick cement concrete 1:2:4 type B0 (using 12.50mm graded stone aaggregate) as in floor finished even and smooth using extra cement complete all as specified and directed.

M&L for 40mm thick cement concrete 1:2:4 type B0 (using 12.50mm graded stone aaggregate) as in floor finished even and smooth using extra cement complete all as specified and directed.

M&L for PCC 1:2:4 Type B-1 using 20 mm graded stone aggregate as in coping, bed plate, fillets and similar works including rounded or chamferred on edges with necessary form work complete all as specified.

M&L for PCC(1:2:4) type B-0, using 12. 5 mm graded stone aggregate as in chajjas to achieve required slope including formwork making rounded chamfered on edges mixed with WPC @ 2% by weight of cement, complete all as specified and directed. Note: WPC shall measured and paid separately,

M&L for PCC 1:3:6 type C-1 (using 20mm graded mechanically crushed stone aggregate) 75mm thick as in plinth protection/footpath, surface to be finished even and smooth without using extra cement including laid in alternate bays and joint to be filled with bitumen filler complete all as specified

M&L precast reinforced cement concrete 1:11/2:3 type A-1 (using 20mm graded stone aggregates) as in cover slabs, shelves and the like including weathering, slightly rounded or chamfered angles and throating, also including use and waste of form work, complete all as specified and directed, Note : Reinforcement shall be measured and paid separately.

S&F hard drawn steel wire fabric cut to lenghts, bent to shape required and tying with and including mild steel wire (annealed) not less than 0.9mm in dia supplied and fixed in reinforcement ,wt exc 4 kg complete all as specified

M& L for grouting 25 mm thick under stanchion bases or grillages ,RCC beams columns and chajja etc including any temporary shuttering to edges with cement mortar 1:2 to make good surfaces.

Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water etc.

M&L rendering 15mm thick in CM 1:6 on fair faces of brick/concrete surfaces finished even & smooth without using extra cement complete all as specified.

M&L for rendering 20 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 in two layers including mixing WPC as per manufacturers instruction, finished even and smooth without using extra cement complete all as specified.

M&L for rendering 5 mm thick in CM 1:3 as in ceiling finished even and smooth without using extra cement complete all as specified.

Supply only integral water proofing compound.

M&L for Preparation of newly plastered wall surfaces and applying three coats of white washing all as spd.

M&L for Preparation of newly plastered wall surfaces and applying three coats of colour washing all as spd.

M&L for preparation of newly plastered external wall surfaces and applying two coats of cement based paint over a coat of alkali resistant primer complete all as specified and as directed

M&L for preparation of new plastered surfaces on ceiling and applying three coats of white wash complete all as specified and directed

M & L for complete removal of old plastered surfaces of ceiling and applying two coat of white wash, complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat alkali resistant primer applied over 1-2 mm thick wall putty all as specified and directed. .

M & L for complete removal of existing surfaces of wall and applying applying two coats of oil bound distemper over one coat of primer with 1-2 mm thick wall care putty,complete all as specified and directed.

M&L for preparing old decorated surfaces and applying one coats of cement base paint on wall complete all as specified

M&L for preparing old decorated surfaces of walls including brooming down or steel wire brushing scrapping down smoke spot ,moulds ,moss and efflorescent salt and trading oil and gressy spots and applying one coat of weather exterior emulsion paint complete all as specified

M&L for preparation of new plastered surface of walls and applying two coats of weather resistant acrylic emulsion paint over a coat of primer complete all as specified and directed

M & L for complete removal of existing surfaces of wall and applying two coat of weather resistant acrylic emulsion paint over a coat of primer complete all as specified and directed

Taking down shutters with chowkats area exc. 1.5 Sqm and n. exc. 4.00 Sqm each complete all as specified.

Taking down shutter for easing and adjusting and refixing in same opening area exc 1.00 sqm and n.exc 2.00 sqm each complete all as specified and directed

S&F pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock, strick plate, etc Size of frame 105 x 60 mm including providing one shop coat of zinc chrome primer complete all as specified.

S&F pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock, strick plate, etc Size of frame 125 x 60 mm including providing one shop coat of zinc chrome primer complete all as specified.

S&F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides ,complete all as specified.

Supply and fixing IInd class hard wood factory made 35mm thick glazed skelton shutters (Three panel), open rebated and prepared to receive glass, gauge etc. edges of framing, plain, chamfered or rounded, fitted with cut and mitred beads for securing glass/gauge etc. with sizes of members of shutters as specified in para 8.24(a) of SSR 2009 (Part I), complete all as specified and directed.

S&F stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified

S&F PVC door frame of size 50mmx47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube fixing in opening as per specification & drawing all as specified and directed.

S&F factory made soild panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed togehter with solvent cement, supplying & fixing in the frame at site as per specification complete all as specified and directed.

S&F 300 mm aluminum anodised sliding door bolts, ISI marked, with hasp, staple (bolt type) complete with clamps bolt not less than 16mm dia and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolt of extruded section or cast aluminum alloy, complete all as specified.

S & F 300mm, ordinary rat tail rod pattern springs of mild steel including roller and roller plate for skeletton door shutters complete all as specified.

S&F aluminum anodized barrel tower bolts of extruded section 200mm long, ISI marked, complete all as specified.

S&F 200 mm long Aluminium handle cast type anodised complete all as specified and directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples.

S&F 100 mm long stainless steel butt hinges all as specified.

S&F 150 mm long aluminium, anodised, barrel tower bolts of extruded section complete all as specified.

S&F 150mm long Aluminium handle cast type anodised complete all as specified and directed.

M&L for painting to new wooden surfaces of any description not otherwise described over 10cm width or girth, and applying two coats of synthetic enamel paint over one coat of pink primer including preparation of surfaces complete all as specified.

M&L for preparation of old wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.

S&F steel windows with side hung shutters including box type hinges with steel handle and steel peg stay complete with glazing bars, dovetailed or welded including providing one shop coat of zinc chrome primer complete all as specified.

All as per item No.53 hereinbefore but without glazing bars for gauzed shutter complete all as specified and directed including providing one shop coat of zinc chrome primer.

S&F flat iron (mild steel) fillets fixed to fly proof steel window shutters with screws or riveted for securing wire gauze etc or as in wind ties for roof complete all as specified and directed.

S&F mild steel square bar 12mm in grill or guard bars welded to steel window all as specified and directed.

S&F sheet glass ordinary quality 3mm thck and glazing with oil putty and securing pins not exceeding 0.50sqm each pane complete all as specified and directed.

Supply only 4mm thick figured glass/pin headed type ordinary quality fixed in steel ventilator, complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint on newly primed steel surfaces exceeding 10cm in width or girth complete all as specified and directed.

M&L for cudappa stone slab flooring 20-25mm thick over and including cement 20mm screed base in cm 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces exceeding 10cm in width or girth complete all as specified and directed.

M&L for preparation of old steel surfaces and applying one coats of synthetic enamel paint complete all as specified and directed.

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc complete all as specified..

M&L for brick work with sub class 'B' bricks using old size bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6 complete all as specified.

M&L for brick work with sub class 'B' bricks using old size bricks in Half brick thick straight or curved on plan exc 6 mtr mean radius built in CM 1:6 complete all as specified.

S&F mild steel tower bolts stove enamelled black with bright bolt 200 mm long complete all as specified.

S&F 300 mm long mild steel sliding door bolts plate type stove enamelled black with bright bolts not less than 12mm dia with and including a minimum of 6 bolts and nuts four on bolts plate & two on staple plate .

S&F mild steel pressed handle oval type stove enamelled black 150 mm long complete all as specified.

S&F 100mm Mild steel cold rolled butt hinged medium weight complete all as specified.

M&L for PCC 1:3:6 type C1 (using 20mm graded stone aggregate) as in block for hold fast, filling in frames, copings or similar work and finished the surface with existing including form work complete all as specified.

S&F Mild steel bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required, hooks (stay), heavy, for large gates, hook and pintle hinges, large hasps and staples, chains, hand made sliding bolts, clamps, hold fasts, wall ties, hooks for hanging fans, plain angle cleats for securing purlines to steel trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified.

Surface dressing n.exc 15 cm depth in soft/loose complete all as specified and directed

S & F 2nd class hard wood (SAL) plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified.

S&F in repair vitreous china urinal, bowl type, white including waste pipe, waste coupling and sprinkle push type including CP Spreader , flush pipe and waste pipe complete all as specified.

Dismantling PVC water tank of capacity Exc 500 Litre and not Exc 1000 Litres complete all as specified.

S&F Rotational moulded polyethylene water storage tanks 1000 Lit capacity double layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I.

S&F Rotational moulded polyethylene water storage tanks 500 Lit capacity double layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I.

S&F in repairs of 20 mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball for iron pipe and fixed in repairs complete all as specified

Taking up or down 15 mm bore steel tubing and connections including cleaning for re-use or removal from site complete all as specified.

Taking up or down 20 mm bore steel tubing and connections including cleaning for re-use or removal complete all as specified.

Taking up or down 25 mm bore steel tubing and connections including cleaning for re-use or removal complete all as specified.

S&F for 15 mm bore medium grade galvanized steel water tubing with all fittings and fixed to wall/ceiling or laid in floor complete all as specified as in short lengths complete all as specified.

S&F for 20 mm bore medium grade galvanized steel water tubing with all fittings and fixed to wall/ceiling or laid in floor complete all as specified as in short lengths complete all as specified.

S&F for 25 mm bore medium grade galvanized steel water tubing with all fittings and fixed to wall/ceiling or laid in floor complete all as specified as in short lengths complete all as specified.

S&F in repair 15 mm bore bib tap, fancy type, chromium plated cast copper alloy with capstan head wall flange screwed down screwed for iron pipe complete all as specified

S& F 15 mm bore angle stop valve cast copper alloy chromium plated fancy type with capstan head, wall flange screwed down screwed for iron pipe and fixed in repairs complete all as specified

S&F in repairs 15 mm bore Pillar tap cast copper alloy in single lever with capsten head chromium plated fancy type screwed down high pressure with or without letter hot or cold with long screwed shank and flynuts screwed for iron pipe complete all as specified

S&F 15 mm bore stop valve cast copper alloy fancy type chromium plated with long shank and cup (conceled type) with capston head wall flange etc screwed down screwed for iron pipe and fixed in repairs complete all as specified.

S&F of PVC connection pipe 15 mm dia 450 mm long with PTMT nut fixed in repairs

S&F in repairs vitreous china squatting pan "ORISSA" patern of size 580x440mm white, with integral foot rests "P" or "S" trap (excluding flushing cistern & flush pipe) incl provisioning of lime concrete bedding complete all as specified.

S&F in repair PVC valve less syphonic action type flushing cistern 10 ltrs capacity low level white with inlet, ball valve, float and handle including brackets complete all as specified.

Cutting chases in brickwalls girth exc 10 cm but n exc 20 cm , pinning in making good to facings where required and pointing in cement mortar 1:3 for conceled water tubing etc and making good complete all as specified.

S&F in repairs vitreous china ware wash hand basin white colour flat back of size 550x400mm including CI brackets, CP brass waste coupling 32mm with waste pipe etc complete all as specified.

M&L for sunken floor treatment by roughening of sides and bottom of sunken floor by picking,sweeping clean and washing down with water to remove dust etc. and 10mm thick rendering in CM(1:4) on concrete surface (bottom sides of sunken floor) finished fair and even mixed with liquid water proofing compound 'conplast X 421 IC' mfd by M/S FOSROC chemicals (india) pvt ltd,priming coat of "Nitro proof 100" and after drying of primer applied one coat of 'Nitro proof 120' mfd by M/S FOSROC complete all as specified and directed.

Roughening surfaces of old concrete floor by picking sweeping clean and washing down with water to remove dust and brushing neat cement slurry with 3 kg of cement per sqm complete all as specified.

M&L 20mm thick granite slabs of any type (table rubbed and polished) on cooking platforms set and jointed in net cement slurry and pointing in white cement (1:2) using marble dust with admixture of pigment to match shade of granite including necessary moulding at edges laid over and including 10mm thick cement mortor screed bed in cement mortor (1:3) complete all as specified and directed.

M & L 18/19mm thick preliminated partical board grade 1 quality exterior grade type fixed with screws to timber frame work as in cup board shelves etc complete all as specified.

M& L for Hasp and staple, safety type, aluminium anodised 100 mm including bolt to hinge plate and fixed with screws complete as specified and directed.

Re-writing letters or figures (Block, Roman, Italic or Indian) n.exc 30cm height with synthetic enamel paint complete all as specified.

S&F Grating doom 150 mm square with waste hole of PTMT. (Minimum weight 40 gms)

S&F in repairs sheet glass shelf assembly consisiting of 5.5 mm thick sheet glass shelf 12cm wide with CP brass bracket guard railing 60cm long complete all as specified.

Taking down steel window including all fittings complete all specified and directed

S&F in repair curtain rod 25 mm dia stainless steel with 02 nos bracket and 02 nos knobs complete all as spd and directed.

S&F in repair 25mm bore gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipes, complete all as specified and directed.

S&F sinks made of stainless steel 1mm thick, kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including provision of fixing cantilever brackets and connecting union to pipe, also including 40mm bore PVC waste pipe, overall size 495mm x 420mm with bowl size 410mm x 330mm x160mm, complete all as specified and directed.

S & F PVC (SWR) soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls or floor of 110mm bore incl taking down old un serviceable pipe complete all as specified and directed.

S & F PVC (SWR) soil, waste and vent pipes single socketed in any length with rubber rings joints fixed to walls or floor of 75mm bore incl taking down old unserviceable pipe complete all as specified and as directed.

S&F PVC (SWR) bends any radius suitable for 110mm bore pipe provided with access door complete all as specified and directed.

S&F PVC (SWR) bends any radius suitable for 75mm bore pipe provided with access door complete all as specified and directed.

S&F PVC (SWR) 110mm Junction (Single T) equal or un equal provided with access door complete all as specified and directed.

S&F PVC (SWR) 110mm Junction (Single Y) equal or un equal provided with access door complete all as specified and directed.

S&F PVC (SWR) 75mm bore junction (Single T) equal or un equal provided with access door complete all as specified and directed.

S&F PVC (SWR) 75mm bore junction (Single Y) equal or un equal provided with access door complete all as specified and directed.

Roughening surfaces of existing roof treatment and taking out old APP membrane and removing from site including cleaning and washing down with water to remove dust etc complete all as directed.

M&L for 10mm thick rendering in Cm (1:4) over RCC roof surface to receive roof treatment finished even and smooth without using extra cement mixed with water proofing compound as per manufacturers instruction (WPC shall be measured and paid separately).

M&L for providing, laying water proofing treatment over RCC roof shall be as under:- (a) The dried plastered surface of slab shall be painted with one coat of bituminous primer @0.4 liter/Sqm. (b) Over the primed surface a layer of APP based polymeric membrane minimum weight of 3 kg/sqm of approved manufacturer minimum 3mm thick, reinforced with polyster non woven fabric (weighing not less than 160gms/sqm) shall be laid by torch application method. The side over laps of membrane shall be minimum75mm and the end laps shall be minimum 100mm and sealing all overlaps and joints shall be done as per manufacturer's instruction. (c) The finished surface shall be given Aluminium paint @ 0.11 Kg/Sqm on APP as per manufacturer's instructions. Make:-M/S TEXSA INDIA LTD (MOPLY-FP) / M/S STP LIMITED (SUPER THERMOLAY) / IWL INDIA LIMITED (HYPERPLAS)/M/S Tiki Tar Danosa (India) Pvt Ltd (Hydro Stop)/M/s Supreme Bituchem India Pvt Ltd (Super Shield)

M&L for 50 mm thick PCC (1:2:4) type B-0, using 12.5mm graded stone aggregate as in levelling course over RCC roof surface to achieve required slope including making rounded or chamfered on edges complete all as specified and directed.

Excavation intrenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, etc and getting out in soft/loose soil complete all as specified

M&L for PCC 1:4:8 type D-2(40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified

M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

M&L for hardcore of broken stone gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified

M&L for 100 mm thick cement concrete type C2, 1:3:6 (using 40 mm graded stone aggregate) in sub floors, sub-bases etc for receiving the toping layer finish the surface even & rough, complete all as specified and directed.

M&L for brickwork, old size with fly ash bricks straight or curved o.n plan exc 6 m mean radius, built in CM1:6 complete all as specified and directed.

M&Lfor brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls built in 1:4 complete all as specified and directed.

Rendering 15 mm thick cement plaster on fair surfaces of brick work or concrete surfaces in CM 1:4 finished to even and smooth sitfaces in without using extra cement complete all as specified and directed .

M&L for coloured Non-skid ceramic tiles 7 to 8mm thick (square/ rectangular) of approved size, area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floors etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment complete all as specified

M&L for coloured 300x200x7mm thick glazed ceramic tiles on vertical surfaces such as skirting,dado and risers to steps etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match,complete all as specified.

S&F towel rail 600mm long of PTMT (min weight 190 grams) fixed with and incl chromium plated brass screws and wooden/plastic cleats, complete all as specified and directed.

S&F 32 mm bore high density polyethylene pipes (LDPE) pof pressure rating 6 kgf/cm2, fixed to walls,ceiling or laid in floors etc, complete all as specified and directed

S&F cast iron Nahani trap with grating incl jointing to waste pipe of 75 mm dia in and including cement concrete type B1 (1:2:4) complete all as specified and directed.

Removing Excavated material ( soft/loose soils) not exceeding 50 M and depositing where directed at a level not exceeding 1.5 M above the starting point, complete all as specified and directed.

Returning and fillling in. including spreading in layers not exceeding 25 cm thick well ramming watering etc complete all as specified.

Removal of the demolished material to a distance n. exceeding 50m depositing where directed at a level 1.5m above starting point complete all as specified and directed.

M&L for vitrified ceramic tiles 10 mm thick (square/ rectangular) polished size, area of each tile exc 0.36 sqm and exceeding not exceeding 0.42 Sqm in floors etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match, over and including 20mm thick cement mortar screed bed in CM 1:6 etc, complete all as specified and directed.

M&L for vitrified ceramic tiles 10 mm thick (square/ rectangular) polished size, area of each tile exc 0.36 sqm and exceeding not exceeding 0.42 Sqm in walls etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match, over and including 10mm thick cement mortar screed bed in CM 1:4 etc, complete all as specified and directed.

S&F 110 mm bore PVC (SWR) Vent cowl complete all as specified & directed

M&L 75mm thick cement conrete 1:4:8 (type D-2) (using 40mm graded stone aggregate) as in sub base, finished even and fair to achieve the topping layer of tiles, complete all as specified and directed.

M&L for chequered cement concrete tiles 30cm x 30 cm x 25 mm thick (with grey cement and pigments), set, jointed and pointed in neat cement slurry in floor with grey cement mixed with pigments to match with the colour of tiles, laid over and including 20 mm thick screed bed in CM 1:4, complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge, any thickness including nainital or similar pattern in roof coverings etc complete all as specified and directed.

S&F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550mpa as in roof covering/clading to wall, fixed with self taping screws as specified.

S&F pre painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550mpa as in roof covering/clading to wall, fixed with self taping screws as specified.

Dismantling boarding any description fixed in any position with nails, complete all as specified and directed.

S & F Anodised alluminium snap grid frame work size 605x605mm for false ceiling including 2.5mm dia hangaers complete all as specified.

M & L for 4 mm thick Non asbestos fibre cement building desginer boards fixed or laid/ inserted to trimber/ GI/ aluminium frame, fixed in ceiling complete all as specified and directed. .

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and raming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m and making good surface soft/loose soil complete all as specified

Surface excavation n.exc 30cm deep and averaging 15 deep in soft/loose soil and getting out.

M&L For cement concrete 1:2:4 type B1 (using 40 mm graded stone aggregate) of foundation for fixing tublar poles/trusses in columns , Pillars, etc complete all as specified.

M&L RCC 1:2:4 , type B1, 20mm graded aggregate as in lintels upto 1.5m clear span and lintel band, roof band , lintels and other similar work all as specified.

M&L for RCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in slabs, landings, shelves complete including necessary formwork complete all as specified and directed

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings, lintel, chajjas and similar work; not exceeding 200mm thick (Horizontal or sloping)

S&F mild steel plate (Plain or chequrred) channel square cut or notched(ordinary and counter sunk)forming holes, without any attachment for FE- 410-0 complete all as specified and directed.

S & F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified and as directed.

S & F mild steel TMT bars 5mm dia and over as in stirrups cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified and as directed.

Dismantling post or struts (wood, steel or RCC) any section, including taking out embedded portion in concrete and making good the disturbed ground complete all as specified and directed.

M& L for Mild steel TMT bars 06 to 08 mm dia. cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

Dismantling steel structure, grill grating complete aal specified and directed

S&F mild steel Framed work such as grills, gratings etc, with ends of bars shouldered or rebated or forged into spikes, framed guard bars, barred iron doors, railings, framework of water tanks and similar work conforming to Fe -290 Grade -E-165, complete all as specified and directed.

Dismantling fencing wire mesh, any type complete all as specified and directed.

S & F mild steel Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified.

Supply only Chain link fencing including line wires, 4 mm dia mild steel galvanised , 100x100 mm mesh complete all as specified and as directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified

S & F MS Flats in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.

S & F Mild steel bolts. purpose made with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut. Exc 30cm long etc complete as specified.

S&F Framed work as in doors or gates of angle Fe 410 -W (Gde- E- 250) quality- A or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging; including angle iron, flat iron, sliding bolt, guard bars and 2.5 mm wire mesh also fastening and fixing complete all as specified and as directed.

Taking down carefully old unserviceable copper/aluminium point wiring (light,Exchaust fan, socket or power) complete incl fittings such as switches,ceiling roses, pendents, regulators,bells,sockets,tube light fittings etc, and making good disturbed surface of walls & floors etc complete all as specified and as directed.

Taking down old unserviceable Main Switch, DB's consisting of MCBs wooden/GI/MS sheet board etc for kept in store and for later use all as directed.

Taking down carefully unserviceable sub main wiring of any size/core/type including making good the disturbed surfaces all as directed.

M&L for concealed point wiring with two single core PVC insulated, unsheathed, multistranded copper conductor FRLS of size 1.5 sqmm and one single core PVC insulated unsheathed stranded copper conductor of size 1.50 sqmm green in colour as earth lead in and including PVC rigid conduit (medium grade) with all fittings & accessories including provn of MS sunk terminal box of appropriate size suitable for switch fixed flush to wall for mounting switch, sockets, fan regulators etc with 3mm thick hylum sheet top cover with screws & cup washers for one light / fan point / call bell complete. NOTE : Cost of making good the disturbed surfaces (if any) matching with the existing surface is deemed to be included in the unit quoted rates.

All as per Item Sl No 169 here in before but with two single core PVC insulated, unsheathed, multistranded copper conductor of size 1.5 sqmm and one single core PVC insulated unsheathed stranded copper conductor of size 1.5 sqmm green in colour as earth lead for 5/6 A switch-socket point on independent board complete.

All as per Item Sl No 169 here in before but with two single core PVC insulated, unsheathed, multistranded copper conductor of size 2.5 sqmm and one single core PVC insulated unsheathed stranded copper conductor of size 2.5 sqmm green in colour as earth lead for 15/16 A switch-socket point on independent board complete.

All as per Item Sl No 169 here in before but with two single core PVC insulated, unsheathed, multistranded copper conductor of size 1.5 sqmm and one single core PVC insulated unsheathed stranded copper conductor of size 1.5 sqmm green in colour as earth lead for 5/6 A socket point with switch on same board complete.

All as per Item Sl No - 169 here in before but for light point controlled by 2 way switch with 1.5sqmm FRLS wires all as directed

M & L for Switch Socket combination 3 Pin, 5 Amp flush type universal, 240 volts, complete as directed.

M & L for Socket outlet 3 Pin, 5 Amp flush type universal, 240 volts, complete as directed.

M & L for Switch Socket Combination 5 in 1, 3 pin, 5 and 15 Amp flush type universal, 240 volts, complete as directed.

S&F piano switch single pole 5 Amp 230 Volt all as specified and as directed.

S&F ceiling rose ,surface bakelite 65mm x 50mm size with three terminals all as specified and as directed.

S & F Bell Push Flush type 5 Amp, 240 volt all as specified.

S & F Bell Ding-Dong AC 230 V Single Pole complete as dircted.

Taking down existing u/s FTL light fitting and S&F in repair decorative box type fitting with LED light fitting 20 watt 4 feet with Al extruded batten luminaire for 230 volt AC all as directed by EIC

M&L LED building security light of capacity 40 watt in Aluminium PDC housing, toughened glass cover with IP66 protection complete with all fixing arrangement and connection of PVC copper wire not exc 5 mtr.

Taking down existing u/s FTL light fitting and S&F in repair decorative box type fitting with LED light fitting 9 watt 2 feet with Al extruded batten luminaire for 230 volt AC all as directed by EIC.

Taking down ceiling/exhaust fans of any size, sealing cable end,dismantling blades and removing fan and blades to store for refixing/depositing to MES store or as directed.

S&F electronic step regulator (speed regulation in 5 steps) suitable for ceiling fan 1200 sweep/1400 mm, 120 Watt complete.

S&F in repair energy efficient, 5 star rated ceiling fan 230V, 1200 mm sweep with all accessories and connecting up with the ceiling rose with required flexible wire of suitable size with ceiling fan complete all as specified and as directed.

S&F ventilation fan with louvers, single phase, 230/240 V, of size 150 mm seeep polycarbonate body, axial flow fan with hidden blades, low noise and weight with thermal overload protection and removable screwless front for easy cleaning incl making holes on wall & making good the distrubed surfaces with all connecting arrangements complete.

Supply & Fixing DB with sheet metal enclouser 240 volts, 8 way with rated bus bar single pole & neutral double door for MCB, incl cutting chases for DB of reqd size and making good distrubed surface area complete all as specified and as directed.

Supply & Fixing MCB double pole (DP) 240 volts of capacity 32 Amp ,C curve, complete all as specifie and as directed.

S&F MCB, SP, 10KA, 415V, "C" curve, 06-32 A, ISI Marked complete all as specified.

Supply & Fixing TP&N DB 4 way with sheet metal enclouser 415 volts, double door 200 Amp rated bus bar for MCB incl cutting chases exc 10 cm but not exc 20 cm girth for DB and making good distrubed surface area complete all as specified and as directed.

S&F MCB, TPN, 10KA, 415V, "C" curve, 63 A, ISI Marked complete all as specified.

S & F Bell Ding-Dong AC 230 V Single Pole complete as dircted.

M&L LED street light of capacity 40 watt in Aluminium PDC housing, toughened glass cover with IP66 protection complete all accessories with frame and connecting PVC copper wire not exc 5 mtr all as directed.

S&F in repair exhaust fan AC, single phase, 230/240 V, of size 230 mm seeep steel/aluminium metal body with lowers incl making holes on wall & making good the distrubed surfaces with all connecting arrangements complete all as directed.

S&F in repair energy efficient, 5 star rated electric water heater/geyser compact design size with rotary nob thermostat 25Ltr capacity 230V, 2000Watts including all necessery wall fixing arrangements and fitting with hot/cold connection pipes, all as directed complete all as specified and directed.

S&F MCB TPN 63Amp four pole 415 volt breaking capacity 16KA adjustable thermal and adjustable magnatic complete all as directed.

Material and labour for concealed sub main wiring surface type with two nos single core PVC insulated unsheathed multi strand copper conductor FRLS cable of size 6 sqmm and one no single core PVC insulated unsheathed multi strand copper conductor FRLS cable of size 6 sqmm as in continuous earth wire drawn into and including surface rigid non-metallic ISI marked PVC conduit medium grade with all fittings and fixings accessories complete all as specified and as directed.

M & L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6 mm thick burried directly in ground (in vertical position ) earth pit not less than 2.25 mtrs below normal ground level with the top edgeof the earth plate not less than 1.5 mtr (B.G.L.) & connected to galvanised iron wire 4 mm dia by means of bolts,nuts,checknuts & washer of galvanised iron including PCC (1:2:4) type B1 precast RCC cover slab with suitable handle made pf 6 mm round bar, including necessary excavation & earth work in any type of soil , 20 mm dia med grade galavinised steel tube for watering with one end fixed with cast iron funnel & wire mesh, 15 mm bore light grade galvanised steel tubing up to 7.5 mtr length for drawing earth lead GI strip proctection & common salt , charcoal in alternate layers etc. complete all as shown in EP no 3 of SSR Part 1 & testing on complection incl taking down old unsv earthing complete.

Excavation intrenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, etc and getting out in hard/dense soil complete all as specified

Supply and laying in trenches/wall LT UG XLPE insulated ,armoured heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area 25sq mm 3.5 core including making necessery connections all as specified and as directed.

Supply & laying in trenches clear sand for cushioning under cable 8 cm below and 15 cm above complete in level all as specified and directed by Engr-in-Charge. Note:- Punned thickness shall be measured.

Supply and laying burnt clay sub class B brick as cable protection all as specified and directed.

Supply and fixing GI pipe 40mm medium grade for cable protection complete all as specified and as directed.

SRI SURAJIT SENGUPTA

SHRI JAYANTA GHOSH

D.D. BROTHERS

M/S SUBRATA JOARDAR

JHA CONSTRUCTION AND CO

M S ALOK SAHA