Loading
Loading…
Loading…
Tender Value
₹2.7 L
EMD Value
₹5,470
Closing Date
14 Jul 2026, 12:00 pm6d left
Er. Gurpreet Singh Bhains
Office of the Executive Engineer, Electrical Division No. 1, Sector-9,Chandigarh.
PROVIDING PERMANENT ELECTRICAL INFRASTRUCTURE FOR CONNECTING THE TEMPORARY DG SET TO THE DIFFERENT BLOCKS OF GMSSS, SECTOR-10, CHANDIGARH.
2026_CHD_93592_2
E1/TN-176
Open Tender
Electrical Works
30 days
Chandigarh
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹5,470
7 Jul 2026
7 Jul 2026
14 Jul 2026
7 Jul 2026
14 Jul 2026
7 Jul 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Supply and erection of Change over switch with Enclosure of following ratings installed in existing switch board with nuts & bolts of requisite size after making holes etc. (As per Complete Item No. 1 of the DNIT). | |||||
| 1.01 | Change Over switch 100 Amp | 1 | Each | 9,520 | ₹9,520 |
| 1.02 | Change Over switch 400 Amp | 1 | Each | 27,310 | ₹27,310 |
| 2DSR item No. 2.2 Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. | |||||
| 2.01 | 100A,30KA,FPMCCB | 1 | Each | 8,127 | ₹8,127 |
| 2.02 | 400A,50KA,FPMCCB | 1 | Each | 44,663 | ₹44,663 |
| 3 | S/E of enclosure for MCCB 63/100/125 Amp 3 Pole / 4 pole made out of 16 Gauge M.S. sheet. The enclosure is to be painted after one coat of primer including its erection in existing angle iron board with nut bolts/ screws etc. to complete the job to the entire satisfaction of Engineer In Charge. | 1 | Each | 1,150 | ₹1,150 |
| 4 | S/E of enclosure for MCCB 400 Amp 3 Pole / 4 pole made out of 16 Gauge M.S. sheet. The enclosure is to be painted after one coat of primer including its erection in existing angle iron board with nut bolts/ screws etc. to complete the job to the entire satisfaction of Engineer In Charge. | 1 | Each | 2,700 | ₹2,700 |
| 5Supply and erection of sheet metal bus-bar chamber on existing surface with required No. of bus-bar strips of suitable length and cross-sectional area, made of copper strips of suitable length and cross-sectional area enclosure made of M.S.,(As per Complete Item No. 5 of the DNIT). | |||||
| 5.01 | Sheet metal bus-bar chamber suitable for 100 Amp. 415 Volts capacity with 4 copper strip Bus-bars each of length 600 mm & cross-sectional area (25.4mmx3.17mm) enclosure having overall dimensions (680mm x 400mm x 150mm) nominal. | 1 | Each | 3,980 | ₹3,980 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.75 MB
176c.pdf
Tender Documents • 0.72 MB
Axxexure-1.pdf
Additional Documents • 0.32 MB
BOQ_114975.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid