SPECIAL REPAIR TO FENCING, BLDG NO T-67, T-68 AND PROVN OF 01X TOILET AND WATER CONNECTION AT CERTAIN UNITS CERTAIN UINTS UNDER AGE BR-II AT BENGDUBI MIL STN

Amount

SCHEDULE 'A' PART-I (B/R WORKS)

Surface dressing n exc 15 cm deep in soft/ loose soil complete all as specified and directed.

Excavation in trenches not exc 1.50 mtr wide and not exc 1.5 mtr deep for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc and getting out in loose/soft soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 cm thick in soft / loose soil complete all as specified and directed.

Removing excavated material (soil) to a distance exc 50m and depositing where directed at a level n. exc. 1.5 m above the starting point complete all as specified and directed.

Removing excavated material (soil) to a distance exc 250m but n.exc. 500m and depositing where directed at a level n. exc. 1.5 m above the starting point complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundation filling & mass concrete complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in foundation filling & mass concrete complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate in lintel upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs, fixing of hold fast and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete all as specified.

M&L for Fly ash brick work with old size bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

Ditto all as per item no 9.00 above but except bricks

M&L for Fly ash brick work with old size bricks, straight or curved on plan to any radius half brick thick built in In cement mortar 1:4 complete all as specified and directed.

M&L for hardcore of gauge not exc. 63mm, deposited, spread and levelling in layers not exc. 15 cm thick, watered and rammed to true surface with broken stone or boulder complete all as specified and directed.

M&L 75 mm thick PCC 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in flooring complete all as specified and directed.

M&L for cement concrete chequered tile of approved quality size 300X300X 25mm thick on floors, footpath etc., over and including 20 mm thick screed bed CM 1:6 set and jointed in neat cement slurry and pointed with colour to match th tiles complete all as specified and directed.

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings all as directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation oards/slabs/ blankets, any thickness including cover fillets etc complete all as specified and directed.

Dismantling of timber scantling 40 Sqcm or over in section in any position unframed work all as directed.

Demolition of brickwork or stone/boulder masonry built in cement mortar including all quions, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles all as directed.

Taking down cement plaster any description on brick or stone walls including racking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

Demolition of cement concrete unreinforced in Ground floor & paving n.exc 15cm thickness and removal of debris from site all as specified and directed

Demolition reinforced cement concrete (reinforcement cut as required to faciliate demolition) of any description and in any position not otherwise specifically provided for all as specified and directed.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises etc complete all as specified and directed.

S&F roof trusses (farmed), trusses purlins, crane gantries, rails and fastenings and heavy bracket framing MS angle and tubes medium grade as in truss, purlin, rafters, post etc fixed with and including angle cleat , MS plate etc including necessary welding, fittings etc Fe-410-W (Gde-E-250 quality-A) complete all as specified and directed.

S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe-410-W (Gde-E-250 quality-B) complete all as specified and directed.

M&L Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc. 22.5cm and n exc 30cm long and dia of neck from 11 mm to 15 mm complete all as specified and directed.

S&F Pre-painted coloured trapezoidal profiled galvalume/Zincalume sheet thickness of 0.50 mm TCT confirming to IS-513 (AZ-150 GSM, Al Zn alloy mettalic coating with 550MPA yield stress as per AS-1397) as in roof covering/cladding to wall fixed with self tapping screws(12-14 x 55 with EPDM seals), colour /exterior coat of silicon modified polyster/BHP x RW paint system 20 micron top coat applied over 5 micron primer and 5 micron polyster back coat applied over 5 micron primer complete all as specified and directed.

S&F Pre-painted coloured plain galvalume/Zincalume sheet thickness of 0.50 mm TCT confirming to IS-513 (AZ-150 GSM, Al Zn alloy mettalic coating with 550MPA yield stress as per AS-1397) as roof ridge fixed with self tapping screws(12-14 x 55 with EPDM seals), colour /exterior coat of silicon modified polyster/BHP x RW paint system 20 micron top coat applied over 5 micron primer and 5 micron polyster back coat applied over 5 micron primer complete all as specified and directed.

S&F Decorated PVC False ceiling of size 600mmX600mmX5mm thick (±0.25) plain PVC sheet of 600 Kg/Cum density manufactured by an ISO-9000 certified company, used as a panel insert in a frame work made using GI T-section of size 25mmX25mm of 19 gauge or 1mm thick in square pattern of grid size 6000mmX600mm. The aluminum frame work is supported from the ceiling with the help of J Hook or 4 mm GI wire of required size to maintain the proper levels etc. The aluminum frame work is supported on side wall with the use of aluminum L section of size 25mmX25mm of 19 gauge or 1mm thick angles etc. complete all as specified and directed.

M&L for Reinforced cement concrete 1:2:4 type B1 using 20mm graded crushed stone aggregate for Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc., basement slabs, under-reamed piles and mass concrete etc all as specified and directed.

M&L Reinforced cement concrete 1:2:4 type B1 using 20 mm graded crushed stone aggregate in Columns, pillars, piers, posts and struts complete all as specified and directed.

M&L Reinforced cement concrete 1:2:4 type B1 using 20 mm graded crushed stone aggregate in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L Reinforced cement concrete 1:2:4 type B1 using 20 mm graded crushed stone aggregate in chajjas and in shelves and the like complete all as specified and directed.

Use & Waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, rough finished surface of concrete complete all as specified and directed.

Use & Waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions, rough finished surface of concrete complete all as specified and directed.

Use & Waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc rough finished surface of concrete complete all as specified and directed.

Use & Waste of formwork to chullah hoods, chajjas, troughs and similar items including edges, rough finished surface of concrete complete all as specified and directed.

M&L precast PCC 1:2:4 type B1 using 20mm graded aggregates for precast cement conc slabs as in manhole covers set in cement mortar 1:4 including formwork if required complete all as specified and directed. (Note : Precast man hole covers shall be casted on platform as approved by GE, and curing shall be carried out in water tank continously for 14 days, the cost of temp tank and plat form is deemed to be included in this item )

M&L for TMT bars (Fe-500/ Fe-550D) 10 mm dia & over, cut to length, bent to shape required, including crancking, bending spirally for hooping for columns, hooking ends & binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M&L for TMT bars (Fe-500/ Fe-550D) 8 mm dia, cut to length, bent to shape required, including crancking, bending spirally for hooping for columns, hooking ends & binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

All as per item No. 38.00 here-in-before but 5 mm dia and over upto and including 10 mm dia in stirrups, spaces and binders complete all as specified and directed.

M&L 40mm thick PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in flooring, finshed even and smooth without using extra cement complete all as specified and directed.

M&L for Vitrified ceramic tiles(light shade/double charged/ultra charged) 10 mm thick ( square / rectangular) polished, area of each tiles n. exc 0.36 Sqm in floor etc. set and jointed and incl 15mm thick screed bed in CM(1:6) set jointed in neat cement slurry and pointed with colour cement to match the tiles complete.

ditto all as per item no 42.00 above but on dado /skirting over 10mm thick plasrer in cement mortar(1:3) complete all as specified and directed.

M&L for Non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. over 15mm thick screed in cement mortar (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for joint free (350mm x 450mm) x 7 to 8mm thick coloured glazed ceramic tiles as in dado/vertical services set and jointed in neat cement slurry and pointed in coloured cement to match the surface including 10mm thick rendering as backing coat in cement mortar (1:4) complete all as specified and directed.

M&L for Rendering 15 mm thick on other than fair faces of brick work or concrete surface in cement mortar (1:6) surface finished even & smooth without using extra cement complete all as specified and directed.

M&L for Rendering 15 mm thick on other than fair faces of brick work or concrete surface in cement mortar (1:4) surface finished even & smooth without using extra cement complete all as specified and directed.

M&L for Rendering 15mm thick on fair faces of brick or concrete surfaces in cement mortar 1:4 with water proofing compund as per manufacurer's instructions, finished surfaces fair and smooth without using extra cement complete all as specified and directed. (Note: - WPC shall be measured and paid separately under relevent items.)

Supply only integral water proofing compound liquid grade conforming to IS-2645 complete all as specified and as directed. (Pidiproof of Dr.fixit or equivalent)

Taking down chowkats or frames exc 1.5 and n exc 4.0 Sqm each (with out taking off shutter from the frame) and removing material from the site of work complete all as directed

Taking down chowkats or frames n exc 1.5 Sqm each (with out taking off shutter from the frame) and removing material from the site of work complete all as directed

S&F in steel ventilator with top hung shutter including hinges steel peg staycomplete all as specified and directed.

S&F 1.25mm thick pressed steel frame door 105 X 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed.

S&F of 35mm thick flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides kiln seasoned and chamically pressure treated complete all as specified and directed.

S&F 2nd class HW glazed and skeleton 35mm thick door shutters open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sites of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (b) complete all as specified and directed.

S&F standard aluminium powder coated section (minimum thickness of powder coating shall be 50 micron and colour shall be as approved by GE), as in frame, shutters for doors, windows / ventilators, partitions, kitchen cabinate, kitchen almirah, Fixed/ Open able / side hung/ sliding two or three track or in any pattern, cut to size, jointed with cadmium plated steel screws, including rubber beading or gaskets for fixing glass, provision of hinges, screws, plugs, handle, lock, roller, Nylon ball bearing etc, complete all as specified and directed. Notes:- (i) Weight of Aluminium sections as per actual or as per IS or as per manufacturer, whichever is less, shall only be considered for payment. (ii) Cost of all the items / accessories, Aluminium mongries required for the entire completion of the work shall be deemed to be included in the quoted rate. However glass panes and wire cloth shall only be measured and paid separately under respective items.

S&F standard aluminium powder coated section (minimum thickness of powder coating shall be 50 micron and colour shall be as approved by GE), as in frame, for partition, cut to size, jointed with cadmium plated steel screws, including rubber beading or gaskets for fixing glass, provision of hinges, screws, plugs, handle, lock, roller, Nylon ball bearing etc, complete all as specified and directed. Notes:- (i) Weight of Aluminium sections as per actual or as per IS or as per manufacturer, whichever is less, shall only be considered for payment. (ii) Cost of all the items / accessories, Aluminium mongries required for the entire completion of the work shall be deemed to be included in the quoted rate. However glass panes and wire cloth shall only be measured and paid separately under respective items.

S&F 4mm thick sheet glass of ordinary quality and glazing with oil putty or rubber gasket in squares exc 0.50 sqm in each pane complete all as specified and as directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

S&F 3mm thick sheet glass of ordinary quality and glazing with oil putty or rubber gasket in squares not exc 0.50 sqm in each pane complete all as specified and as directed.

S&F 3.00 mm thick frosted glass, pin headed and glazing with oil putty in square n exc 0.5 sq.m in each pane complete all as specified and directed.

S&F 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

S&F 100 mm Aluminium handles, cast type, anodised complete all as specified and directed.

S&F 150 mm Aluminium handles, cast type, anodised complete all as specified and directed.

S&F 200 mm Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 150 mm Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 100 mm Butt hinges, heavy weight, stainless steel and fixed complete all as specified and directed.

S&F 150 mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

M&L for in repair stainless steel decorative curtain rod of 25mm bore complete all as specified and as directed.

M&L for in repair stainless steel decorative curtain rod bracket and finalie /end cap complete all as specified and as directed.

S&F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint on wooden surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of pink primer complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of red oxide, zinc chrome complete all as specified and directed.

M&L for preparation of old plastered surfacestwo coats of cement base paint on wall, soffits of chajjas, cornices etc complete all as specified and directed.

M&L for complete removal of existing treatment of wall and applying two coat Birla/Asian wall care putty and two coats of oil emulsion distemper of approved tint over a coat of primer on wall over complete all as specified and directed.

M&L for preparation of newly plastered surfaces and applying two coat Birla/Asian wall care putty and two coats of oil emulsion distemper of approved tint over a coat of primer on wall over complete all as specified and directed.

M&L for preparation of newly plastered surfaces and applying two coats of cement base paint over aone coat of primer complete all as specified and directed.

M&L for preparation of new surface of wall and three coat of white wash on wall complete all as specified and directed.

M&L for 75 mm thick plain cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in plinth protections, finished even and smooth w/o using extra cement with joints 10 mm wide and in full depth at corners and @ 3.0 m c/c filled with mastic mortar complete all as specified and directed.

S&F white vitreous china wash basin white flat back size 550x400 (Oval shape) excluding taps but including 32 mm dia chromium plated waste fitting and PVC waste pipe 610 mm long and MS brackets complete all as specified and directed.

S&F in repair Vitreous China wash down water closet pan european type (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device and also including cast iron S trap, bore of pipe 100 mm. and provision of concrete bedding complete all as specified and directed.

S&F Vitreous china urinal, half stall type, white (excluding flushing cistern, flush pipe and waste pipe) including providing and fixing plugs, bedding urianl against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement, fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe complete all as specified and directed. (Make: Hindware/Cera/Parryware)

S&F in repairs PVC valveless, syphonic action type, flushing cistern low level, white, with inlet, ball valve, float and handle including brackets capacity 10 ltr with flush pipe 32 mm dia complete all as specified and directed.

S&F in repairs PVC connection 15mm bore with 2 nos PTMT nuts 45cm long fixed with all as directed.

S&F 100 mm dia cast iron (sand cast) soil waste and vent pipes in any length fixed with cement joints laid in trenches or in floor complete all as specified and directed.

S&F cast iron bend (Sand cast) of any radius with oval access door including jointing with cement joints for (100 mm bore) complete all as specified and directed.

S&F 110mm PVC (SWR) rain water pipe single socketed in any length with rubber ring joints fixed to wall/floor complete all as specified and as directed.

S&F 110mm bore PVC (SWR) 'P' or 'S' trap complete all as specified.

S&F 110mm bore PVC (SWR) junction single, (Single T) equal or unequal, complete all as specified.

S&F PVC (SWR) Bends (any radius), diminishing pieces or tapers, bore of pipe 110mm, complete all as specified.

S&F PVC (SWR) vent cowl bore of pipe 110mm, complete all as specified.

S&F grating doom 100mm dia of PTMT (minimum weightt 25 gm) for floor trap/nahani trap complete all as specified and directed.

S&F CP tubular towel rail 600 mm long and 20mm dia icluding brackets etc complete all as specified and as directed.

S&F Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and as directed.

S&F PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) complete all as specified and directed.

S&F Toilet paper holder of vitreous china fixed to walls with chromium plated (CP) brass screws complete all as specified and directed.

S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement etc complete all as specified and directed.

S&F stop valve 15mm bore, cast copper alloy with chromium plated, long body with crtuch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F gun metal glove or gate valve 20mm bore, with iron wheel head, screwed down both ends for iron pipe and fixed complete all as specified and directed.

S&F in 15 mm Stop valves, cast copper alloy with chromium plated (concealed type), screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repairs Pillar taps, 15mm bore dia of pipe, fancy type (long neck) cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F rotational moulded polyethene water storage tank 500 ltrs capacity (cylindrical vertical with closed top) double-layered including inlet, outlet and wash out holes of approved make hoisted and fixed in position all as specified in SSR Part I etc including complete all as specified and as directed.

S&F ball brass valve, high pressure, with ploythene float and flynut complete, screwed for iron pipe or brass ferrule 20 mm bore complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out in soft/loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and directed.

S&F galvanised steel water tubing, 'medium grade' ISI marked galvanised 15mm bore, with all fitting and fixed complete to walls and ceilings or laid in floors/laid in trenches complete all as specified and directed.

S&F galvanised steel water tubing, 'medium grade' ISI marked, 20mm bore, with all fitting and fixed complete to walls and ceilings or laid in floors/laid in trenches complete all as specified and directed.

M&L for sand filling under floor or in foundations in layes n. exc 25 cm thick including watering and consolidation all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and directed.

M&L for Salt glazed stone ware (SGSW) drain pipes laid in trenches and jointed as specified in 150mm internal dia of pipe grade 'A' complete all as specified and directed.

M&L for Plain cement concrete 1:3:6 type C-2 (Using 40mm graded crushed stone aggregates) as in bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested for 150mm bore complete all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion in natural ground and making good disturbed ground complete all as directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion in concrete and making good disturbed ground complete all as directed.

Dismantling of fencing any type all as directed.

Excavating in post holes (Or similar) each n exc 0.5 Cum getting out returning fillin in and ramming earth or broken rubble mixed with earth around, in layers n exc 25 cm watering and removing surplus soil to a distance n.exc 50 m and making good complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in foundation filling & mass concrete complete all as specified and directed.

M&L Steel work in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

M&L for galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc complete all as specified and as directed (each line wire to be measured)

Restraining and resecurring including making good staples etc plain mild steel wire, galvanised class 3, in fencing including straining and fixing to wood, concrete or steel posts and/or to straining bolts, including securing with and provision of galvanised iron tying wire, galvanised iron staples or steel pins, etc. as directed (each line of wire to be measured)

S&F Mild steel screw bolts(machine made) 10mm dia with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long complete all as specified and directed.

Supply only mild steel in flat, round or square bars, in available lengths as in line wire Fe 410-W(gde-E-250) quality-A complete all as specified and directed.

Supply only galvanised chain link fencing of size 100mm x100mm mesh made out of 10guage mild steel ganvanised wire complete all as specified and directed.

Fixing only chain link fencing including line wires any mesh size and type to any type of standards rails, straining bolts, etc including provision of binding wire etc complete all as specified and directed.

SCHEDULE 'A' PART-II (E/M WORKS)

Taking down carefully existing copper/ aluminium point wiring (light, fan, buzzer, socket or power) complete including fixture and fittings such as switches, ceilling roses, pendants, regulators, sockets light fitting etc for taking credit removing from site and making good disturbed surface of walls, floors etc as per existing specification complete all as specified and as directed.

Taking down of Old MCB DB / control box any type any size including MCBs and separating the serviceable MCB DBs and MCBs for reuse at site complete all as specified and directed.

Taking down of old Submain wiring any size any type including batten/ conduit/ casing at any indicated situation and making good disturbed surface of walls, floors etc as per existing specification complete all as specified and directed.

M&L for concealed point wiring One light point/one fan/light/exjaust/bell point controlled by one switch with FRLS PVC insulated unsheathed multistranded copper conductor cables 1100 Volts grade of 1.5 sqmm size alongwith one earth continuity conductor with FRLS PVC insulated unsheathed multistranded copper conductor cable 1100 Volts grade of 1.5 sqmm size through and including 20 mm dia (medium grade) rigid non metallic PVC concealed conduit terminated in and including pressed steel sunken boxes , readily available (Having wall thickness not less than 1.22 mm for boxes upto a size of 200 mmX300 mm and beyond that the wall thickness shall be not less than 1.63 mm) concealed type with 3mm thick bakelite sheet cover for fixing of switches, sockets, fan regulators etc including testing on completion complete including cutting chases for concealed conduit pinning in making good to facing and pointing in using cement mortar 1:3 and making good to disturbed surface all as specified and directed.

All as per item No 130.00 here-in-before but One 3 pin socket outlet, 5 Amp on independent board all as specified and directed.

All as per item No 130.00 here-in-before but One 3 pin socket outlet, 5 Amp on same board all as specified and directed.

All as per item No 130.00 here-in-before but for one 15 Amp 3 pin switch socket outlet, independent with 2.5 Sqmm single core multi-stranded copper conductor cable (FRLS) along with 2.5 sqmm continuous PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable for earth continuity wire complete all as specified and as directed.

All as per item No 130.00 here-in-before but for one 15 Amp 3 pin switch socket outlet, independent with 4 Sqmm single core multi-stranded copper conductor cable (FRLS) along with 4 Sqmm continuous PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable for earth continuity wire complete all as specified and as directed.

S&F Switch piano, flush button type, single pole, one way 6 Amp, 230 volt complete all as specified and directed.

S&F switch socket outlet 5 pin 6 amp, 2 in 1 flush type all as specified and directed.

S&F switch socket outlet multipurpose 6 pin 5/15 amp, flush type controlled by one switch complete all as specified and directed.

S&F ceiling rose surface bakelite three terminals complete all as specified and as directed.

S&F ceiling fan regulator electronic stepping type, SP 230 volts, suitabe for 1200mm / 1400mm sweep ceiling fan inliding necessary electric connection complete all as specified and directed.

S&F Lamp holder , PVC / Polycarbonate type with back plate suitable for B22 lamp including 7 Watt LED Bulb complete all as specified and directed. (Make: Havells/ Philips / Bajaj /Surya)

S&F LED Neo tube light fitting 1x 18W, 230 V, with tube 4 feet wall mounted LED batten ultra bright LED polycarbonate tubelight with very high efficency suitedfor installation existing T8 tubelight with G13 lamp holders to give glare free light complete all as specified and as directed. (Make Crompton/ Havells/ Bajjaj/ Philips)

S&F 12W LED Round recessed mounted downlighter including suitable driver, cutting of False ceiling as required and all accessories for fixing arrangement all as specified & directed. Cat part No LSCR/SM-12W-CDL/NW/WW of make: Crompton or Equivalent model of Philips/Surya/Havells/Bajaj/CG.

S&F Building security LED light luminaire fitting 1X15 W new generation energy saving & envoirmental friendly long life versalite pressure die-cast aluminium IP66 roadway luminarie with high power LEDs as light source and electronic driver with 1.5m long and PC cover having top openning opreate driver compartment all as specified and as directed. (Make Crompton/ Havells/ Bajjaj/ Philips)

S&F decorative wall mounting LED light luminaire fitting with end cover suitable for and including 1X15 W lamp all as specified and as directed. (Make Crompton/ Havells/ Bajjaj/ Philips)

S&F ceiling fan 3 star 1200 mm sweep 230 V SP including Fan regulator electronic step type not less than 100 watt complete with accessories and connection with ceiling rose with MS hooke made out of ms flat iron size 25 X 5 mm for hanging of suitable length complete all as specified and as directed.

S&F Exhaust Fan of Size 300mm sweep, 230Volts AC, PVC Body with connection from existing ceiling rose with louver shutter complete all as specified and directed.(Make Crompton/ Havells/ Bajjaj/ Polar)

S&F Sheet metal enclosure for MCB DB double door Triple pole & Neutral 4 way with common bus bar at incoming end complete all as specified and directed.

S&F single pole and neutral enclosure with a two pin and earth plug socket with double pole one MCB of 32 amp complete all as specified and directed.

S&F MCB Four pole, 415 volts, 40-63 Amps, breaking capacity 10KA complete all as specified and directed. Make:- Legrand Cat No 408700-02 or equivalent model of L&T/ C&S/ Indoasian

S&F MCB single pole 240 volts, 06 to 32 Amps, breaking capacity 10KA, 240 Volts 'C' curve all as specified and directed.

S&F street light bracket made out of GI tubing medium grade size 25 mm bore 1.00 Mtr long bend to required shape as in bracket for street light fittings fixed with two pair MS flat iron 50mm x 6mm size and 30cm long clamp of required shape with bolts nuts and washers suitable for steel tubular pole including painting of mild steel flat iron surfaces with two coats of synthetic enamel paint over a coat of red oxide primer complete including taking down unservicable all as specified and directed.

M&L for earthing complete of advance encapsulated compound based CPRI tested maintenance free, pipe-in-pipe technology upgrated (Zinic & alloy coated) Zinic coated (80-100) microns with pure (99.9%) & alloy coating (200-250) microns earthing system confirming IS-3034 the outer and inner pipe should be 76.2mm & 41.9mm dia 3 mtr length zinic coated with additional special alloy coating 300mm on the topside for additional protection of the terminal the annular space between the pipes being filledup with compact fill(CF) (Crystalline conductive compound) the compact fill (CF) mixture which is machine pressed in the pipes should not disintgrate or collapse when outer pipe corrods, the inner pipe should be extended with terminals for connectivity. The job includes digging the pits and refilling the same by electrode/conductolite back fill compound (Ground enhancer)the BFC should dbe eco friendly it should not contain environmentally hazard materials having ROHS certification from NABL accredited lab. The earth pit should be provided with a FRP earth pitcover for protection and safe guard of terminals. In area where soil condition is bad good earth is to be arranged to fill the excavated pits by mixing the same with BFC 4 bags (as per soil condition) extra perpit/unit. As earth electrode is the main component of the earthing system which is indirect contact with the ground and thus provides ameans of releasing or collecting earth leakage current. The materials should have a good electrical conductivity & anti corrosion properrty in wide range of soil condition complete and testing on completion including dismantlingh unserviceable earthing complete all as specified and directed Make ASHLOK Model ASEELor equivalent Note:- Earth result should be obtain minimum 1 Ohm. Make :- Ennov/OBO or equivalent.

M&L for XLPE insulated GI wire/strip armoured electric power cable (Heavy duty) ISI marked with stranded aluminium conductor 1100 volts grade, cross sectional area 16 Sqmm 4 core laid in trenches /poles/on wall complete including necessary cable glands, aluminium lugs duly crimped, termination etc all as specified and directed.

M&L sand cushioning (dry) in trenches for protection of UG cables (below, above and around the cable laid in trenches) of 230mm spreding thickness and consolidated (punned) upto 180mm thickness complete all as specified and as directed.

Supply & Laying Sub Class 'B' Bricks,old size, well burnt, laid breadth wise along the length of cable laid in trenches over sand cushion for UG cable protection complete all as specified and directed.

Material and labour for galvanized iron tubing 50 mm bore light grade with all fitting for protection of cable, laid in trenches / road cossing incl necessary clamp, bolt/nut if any all as specified and directed. (Note: Excavation, earth work shall be measured and paid separately)

M&L for sub main wiring with 2 run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4 sqmm alongwith one run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4 sqmm as earth continuity conductor drawn through PVC conduit 25mm bore ISI marked complete all as specified and directed. Note :- (a) PVC Conduit shall be included in same rate. (b) For concealed sub-main wiring cutting chases shall be included in rate. (c) All the incomming and outgoing cable should be connected throgh proper lugs & sockets as per site requirement)

(Note : The Scope of Work contained in 'Sch of Credit' amounting to Rs. 51,074.00 (refer Tender Srl Page No 46). The Quoted sum shall be arrived at after deducting the amount of “Sch of Credit” from the total amount of the ‘BoQ’

M/S KAR CONSTRUCTION

PRADIP KUMAR BOSE

SHRI S K BHATTACHARJEE

Prahalad Rai