Electrical installation work

Amount

Supplying and fixing 415 V, 200 A FP Changeover Switch with Sheet Steel enclosure on angle iron frame on wall with nuts bolts etc (Make - Havells / ABB / L & T.

Supplying & Fixing of 415 V, 4 -way SMDB (Make - L& T, Cat No. DA62D1044CZZ0) with IP-43 protection on angle iron frame on wall with S&F following accessories:- a) DN1-250C 3 Pole MCCB - 200A (Make - L& T, Cat No. CM90638OONO) as incomer 1 no., b) DN0-100C 3 Pole MCCB - 100A (Make - L& T, Cat No. CM91612OOKOOG) as outgoing devices - 4 nos. , c) Metering Extension Box, Bottom Cable end Boxes and Side Cabling Boxes, d) Communicable Digital Multifunction Meter (class 0.5) capable of display of Current, Volt, KWH, PF, MD with date & time stamp etc., e) On, off & trip indicating lamp for incoming, f) CL:0.5, 400/1A, 5VA, tape wound CT (Make- Kappa/AE/L&T) for all three phases.

Supplying and fixing 415 V double door 6 way Vertical TPN MCB Distribution Board with IP-42/43 protection (Make - Legrand / ABB / Schneider) comprising with 415 V, 25/35 kA breaking capacity, 100 A FP MCCB as incomer, 415 V, 10 kA breaking capacity, C-Curve 63 A TP MCB 5 nos. and 240 V, 10 kA breaking capacity, C-Curve 25/32 A SP MCB - 3 nos as outgoing with both side cable end box concealed in wall after cutting the wall & mending good the damages to original finish incl. inter connection with suitable size of copper wire and neutral link & provision for earthing attachment.

Supplying and fixing 415 V double door 4 way Vertical TPN MCB Distribution Board with IP-42/43 protection (Make - Legrand / ABB / Schneider) comprising with 415 V, 25/35 kA breaking capacity, 100 A FP MCCB as incomer, 415 V, 10 kA breaking capacity, C-Curve 63 A TP MCB 2 nos. and 25/32 A TP MCB - 2 nos as outgoing with both side cable end box concealed in wall after cutting the wall & mending good the damages to original finish incl. inter connection with suitable size of copper wire and neutral link & provision for earthing attachment.

Supply & Fixing of 415 V, 4 way 32 A per way Double Door HTPN MCB DB with IP-42/43 protection comprising with 1 no. 415V, 63 A 4-Pole Isolator as incomer, 12 nos. 240 V, 16-32 A SP MCB (10KA, C Curve) as outgoing, DIN rail, N & E Bar, internal connections with suitable size copper wire and other accessories, concealed on wall including earthing attachment (Make - Legrand / ABB / Schneider).

Supply & Fixing of 240 V, (2+10) Way Double Door SPN MCB DB (IP 43 protection) comprising with 1 no. 240V., 40 A. DP Isolator as incomer, 10 nos. 6/16A. SP MCB (10 KA, C Curve) as outgoing, DIN rail, N & E Bar internal connections and other accessories, concealed on wall, including earthing attachment (Make - Legrand / ABB / Schneider).

Supply & Laying of 1.1 KV Gr. 2 x 4 Core 150 mm² XLPE / Ar./Al. Cable (Make: Havells / Polycab / Universal/RR Kabel) on existing Cable tray / MS angle support incl. making connections as to G.S.

Supply & Laying of 1.1 KV Gr. 4 Core 50 mm² XLPE Ar./Al. Cable (Make: Havells / Polycab / Universal/RR Kabel) as per direction of E.I.C. as follows, as to GS for VTPNDB.

On wall surface by MS saddle.

On existing Cable tray / MS angle support.

Supply & Laying of 1.1 kV Gr. 4 Core 25 mm² XLPE Ar./Al. Cable as per direction of E.I.C. as follows as to GS for PDB (Make: Havells / Polycab / Universal).

On Wall Surface by MS saddle.

On prelaid cable tray

S & Fixing of compression type brass cable gland (Dowels Make) including end finishing of the following size cables as to GS :-

4 Core 150 mm² XLPE Ar./Al. Cable

4 Core 50 mm² XLPE Ar./Al. Cable

4 Core 25 mm² XLPE Ar./Al. Cable

Distribution wiring in 1.1 KV grade 3x22/0.3 (1.5 s. mm) single core stranded 'FRLSH' PVC insulated & unsheathed copper wire (Finolex / RR Kabel / Havells) partly in 20mm size PVC rigid conduit 'FR' (Precision MMS) [for ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for horizontal & vertical run embedded in wall] to light/fan/call bell points with Piano Key type switch (Anchor) fixed on MS CRC sheet metal (16 SWG) switch board on wall complete with 3 nos. “Ph, N & E” copper bar incl. bakelite/ perspex top cover 3 mm thick and incl. 175x100x65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish [only PVC Rigid Conduit on ceiling and remaining portion concealed] Avg. run 8 mtr.

S & F 240V., 6A. 5 Pin Plug Socket without Top and Piano Key switch (Anchor) on Board as per direction of E.I.C.

S & F socket and step type electronic fan regulator (Make - Anchor) on existing sheet metal switch board with bakelite/perspex top cover by screw after making housing for regulator knob by cutting bakelite/perspex top cover incl. making necy. connections.

S & F 240 V, 20 A, plug socket with separate 20 A Piano key type switch (Make-Anchor) on sheet metal switch board embedded in wall incl. S & F 175x100x65 mm MS switch board (16SWG) and bakelite/perspex top cover (3mm thick) by brass screws after making housing for switch by cutting bakelite/perspex cover and making necy. connections as required.

S & F the set of 2 nos. 240 V 6 Amp 5 pin plug socket & 2 nos. 6 amp piano key type switch (Anchor) on sheet metal switch board embedded in wall incl. S & F 175x100x65 mm MS switch board (16SWG) and bakelite/perspex top cover (3mm thick) by brass screws after making housing for switch by cutting bakelite/perspex cover and making necy. connections as required.

S & F 1 no. 240 V 6 pin 20A plug socket, 1 no. 20 A piano key type switch, 3 nos. 240V 6A 5pin plug socket, 3 nos. 6A piano key switch, 1 no indicator and 16 A Kitkat flush type fuse (Make-Anchor) on 8”X10”X2.5” MS switch board (16 SWG) and bakelite / perspex top cover (3mm thick) by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necy. connections as required.

S & F 3 nos. 240 V 6 pin 20 A plug socket, 3 nos. 20A piano key type switch (Make-Anchor) on 8”X10”X2.5” MS switch board (16SWG) and bakelite / perspex top cover (3mm thick) by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necy. connections as required.

Supplying and fixing of 415 V, 4 way MCB SS enclosure with IP-43 protection, powder coated provision for four pole MCB including supplying and fixing 415 V, 63 A FP MCB Isolator on din rail and necessary connection (Make : Legrand / ABB / Schneider), concealed in wall after cutting the wall & mending good the damages to original finish incl. painting, connection & provision for earthing attachment.

Supplying & Fixing Industrial Plug & Socket board with 415 V, 63 A, TPN & Earth Metal Industrial Plug socket & 63 A Industrial top incl. S & F 63 A TPN/FP MCB breaking capcity 10 kA (C- Curve) in SS enclosure fixed on wall and necessary conection.

Distn. wiring with 1.1 KV. Gr. 4x126/0.4 (16 sq. mm) + 2x80/0.4 (10 sq. mm) as ECC single core stranded copper conductor (FRLS) PVC insulated and unsheathed copper wire (Finolex/Havells/RR Kabel) in 2x 19mm dia 3 mm thick polythene pipe complete with all accessories embedded in wall.

Distribution wiring in 1.1 KV single core stranded 'FRLSH' PVC insulated & unsheathed copper wire (Finolex / Havells / RR Kabel) in 19 mm dia (3 mm thick) polythene pipe concealed in wall incl. necy fittings as required.

2 x 84/0.3 (6 sq. mm) + 1 x 56/0.3 (4 sq. mm) ECC

2 x 36/0.3 (2.5 sq. mm) + 1 x 22/0.3 (1.5 sq. mm) ECC

2 x 22/0.3 (1.5 sq. mm) + 1 x 22/0.3 (1.5 sq. mm) ECC

Finishing of the PVC insulated wire ends by pin/ring type copper sockets and insulated tapes etc., incl. supplying sockets and tapes.

4x126/0.4 (16 sq. mm) + 2x80/0.4 (10 sq. mm)

2 x 84/0.3 (6 sq. mm) + 1 x 56/0.3 (4 sq. mm) ECC

2 x 36/0.3 (2.5 sq. mm) + 1 x 22/0.3 (1.5 sq. mm) ECC

Supply & Fixing of 4 Ft. Twin LED Tube light fitting [Make - Philips cat no. TMC 501 P 2x T-LED / Wipro, Cat no. WIO922208 / Crompton cat no. IGP162 LT8-16] complete with 2x18/20 Watt LED tube lamps [Make - Philips Master LED tube model no.18W 865 T8 I 2100 lm / Wipro, Cat no. LL13-181-65SESL / Crompton cat no. LTT8-20] suspended below the ceiling with S&F 2x20 mm dia EI conduit up to 25 cm long with 'L' type MS clamp and making connection as to GS.

Supply & Fixing of 4 Ft. Single LED Tube light fitting [Make - Philips cat no. TMC 501 P 1x T-LED / Wipro, Cat no. WIO921208 / Crompton cat no. IGP162 LT8-16] complete with 1x18/20 Watt LED tube lamp [Make - Philips Master LED tube model no.18W 865 T8 I 2100 lm / Wipro, Cat no. LL13-181-65SESL / Crompton cat no. LTT8-20] suspended below the ceiling with S&F 2x20mm dia EI conduit up to 25 cm long with 'L' type MS clamp and making connection as to GS.

Supply & Fixing of 240 V. 1200 mm (48") sweep A.C. ceiling fan without regulator incl. down rod, canopy & fan blades etc. and engraving & painting the Departmental Number (up to 14 digit) on Fan Body with black japan paint and interconnection complete in all respect. [Make: Crompton HB+ or HS+/Orient Energy star / Usha Striker plus].

Supply & Fixing of 240V, AC 450 mm sweep, whole metal body base & blade wall bracket fan [Make- EPC Electrical Pvt. Ltd.] with P-2/S-2 type burst proof capacitor.

Supply & Fixing of 240 V., 1420 RPM, 300 mm (12") Dia A.C. Exhaust Fan (EPC - Heavy Duty) incl. Cutting hole on wall, S&F Al. Louver Shutter with Nuts, Bolts, washers etc. & mending good the damages to original finish. (Make - E.P.C. Electrical Pvt. Ltd., Heavy Duty).

Supply & Fixing of 240 V., 1370 RPM, 225 mm (9") Dia A.C. Exhaust Fan (EPC - Heavy Duty) incl. Cutting hole on wall, S&F Al. Louver Shutter with Nuts, Bolts, washers etc. & mending good the damages to original finish. (Make - E.P.C. Electrical Pvt. Ltd., Heavy Duty).

Supply & Fixing of 240V recess mounted LED round light fittings complete with all accessories. [Make:-Wipro, Cat No. LD06-221-XXX-57-XX / Philips, Type - DN296B LED15S-6500 PSU WH / Crompton, Cat No. CDR-206-18-57-SL-NWH]

Supply & Fixing 240 V AC/DC superior type Ding-Dong Call Bell (Anchor) on HW board incl. S&F HW board.

S & F 415 V. twin timer controlled starter assembled in S.S. enclosure of 6 way double door TPN DB with IP-42/43 protection, comprising with 1 no 63A 4 P MCB, 2 nos. 32 A TP MCB, 2 nos. 32 A TP power Contractor (Eq to MNX 40) , 2NO+2NC auxiliary contact, 1 no. 24 hrs. digital timer (Eq. to T2DDT7), 1 no Auto-Off-manual switch, 1 no 10A single way switch, 1 no. Indicating lamp & 1 no 6A SP MCB incl. front locking arrangement, internal wiring & earthing attachment as per direction of EIC. (Make - L&T /ABB / Legrand).

Supply & Fixing 240 V, Double Door (2+10) Way, SS DB with IP-42/43 protection (Make - Legrand/Schneider/ABB) concealed in wall incl. S&F of following electrical accessories with all interconnection made by 2.5 mm² single core stranded PVC insulated copper wire (Finolex / Havells / RR Kabel), finishing the wire ends by copper socket, provision of earthing attachment :-

i) 240V 25A DP MCB (C-Curve & 10 KA) (Make - Legrand / Schneider / ABB) -- 1no

ii) 24 Hr programmable Digital time switch (Legrand, Cat No. 4126 31 / Schneider, Reference CCT15441 / Schneider, Cat no. 15336 / ABB, Type D1) -- 1no

iii) 25 A power contactor (Legrand, Cat No. 4125 44 / Schneider, Reference - A9C20732 / Schneider, Cat No. A9C20732 / ABB, Type code - AX12-30-10) -- 2 nos.

iv) 25A Auto-Off-Bypass DPDT toggle switch - 2 nos.

v) LED indication lamp (approved make) -- 2 nos.

Earthing with 50 mm dia TATA Medium GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level with Excavation of soil for installation of Earth Electrode and filling & ramming for soft soil.

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required.

Connecting the equipments body to earth busbar including S & F 25 mm x 6 mm galvanised (Hot Dip) MS flat on wall/floor with GI saddles as required and connection to equipments incl. drilling holes, with bolts, nuts, washers etc.

Defect Liability Period - 1 (One) year.

STAR ENTERPRISE

GHANASHYAM ELECTRIC STORES

MODERN ELECTRIC

MAA TARA ENTERPRISE