Renovation and up gradation of Auditorium of College of Veterinary Science and Animal Husbandry, BAU, Kanke Ranchi

Providing , Supplying and installing of SOFT FIBRE ACOUSTIC WALL PANEL with square edge made of fibre glass subtrate 25 mm thick and wrapped on the front side with an acoustically transperent and fire resistant fabric with an option of colours as per the choice from the OEM shadecard of size 1200 x 600 mm and 600 x 600 mm as per the design of EIC providing a minimum sound absorption level of 0.90 NRC to be fixed to wall using wall panel impalers including fixing of panel to the wall surfaces by self tapping screws . Silica based construction adhesive shall be dabbed on to the prejecting elements(spikes) as per requirement of the impalers and panel shall be piereced through the spikes with maintaining the line and leval of panel . OEM make adhesive only shall be used for the pasting purpose. Acoustical inner core should be able to absorb 85% of sound striking the surface. The Supplied panel should be Non - combustible,Light Weight and sagging, warpping or delaminating, Green eco-friendly building material. The entire raw materials i.e the 1200 x 600 mm / 600 x 600mm block supplied should be of factory made . Factory Test report should be submitted for the same. Preferred Make- Armstrong/Ecotone/Anutone

Providing and fixing in position of Carpet Elegant design,Premium finish Attractive look Having construction of Loop Pile Plain, Yarn Type- Polypropylene with Solution dye method, 1/10 Gauge, Primary Backing of Woven Polyprolyne, Secondary nacking of Action Black, Permanent Static control having roll length of 40 Mtr and width4/2 Mtr as per requirement and having Pill Test pass for Flammability at Audience Seating Area as per the design approved by EIC ; Preffered Make- Welspun/Donaire/Sundaram/Standard

Providing and fixing of Auditorium chairs , Chair arm rest to arm rest: 22" standard Side Stand: 3" Iron Channel Side Panel: 6mm Ply upholstered Chair leg will be fixed. Chair Seat: Auto Tip UP Inner material:Molded PU. PU Foam density: Seat: 45-50kgs/m3:Back: 45-50kgs/m3: Inner structure: The height ofthe back to be 950-1000mm from the ground totop of back & for Seat to be 400-450mm from theground. The rear of back shell & bottom of seat shell to be Polypropylene plastic in black colour Polypropylene plastic cover. The wooden armrest to be of 80mm & 400mm length with melaminepolished in black colour. The armrest between two chairs in a row to be shared & at the both ends to be individual. Including cost of expansion fasteners. The end chair in the row to have aisle LED light fixture. The bench shall be fabricated as per drawings,specifications & instructions of engineer in charge.Preferred Make:- Godrej/Geeken/Epic Woodberg

Providing & Fixing of Three seater sofa . The inside frame is made of plyw wood and has antitermite treatment. The seat and back are made of foam and is finished in fabric upholestry. The seat is made of PU foam with density 35± 2 kg/cu.mtr. The back is made of PU foam with density 40± 2 kg/cumtr upholstered.. The Frame base has Webbing for Supporting the Cushions. The Complete Sofa Body has Polyurethane Foam in desired shape. The Sofa is supported on Metal Legs powder coated. Fabric colour and type as per directions of Engineer in Charge. 3 Seater 3000mmW X770mmDX705mm± 5% Make:- EPIC Woodberg/Geeken/Wipro/Durian

Providing & Fixing of two seater sofa . The inside frame is made of plyw wood and has antitermite treatment. The seat and back are made of foam and is finished in fabric upholestry. The seat is made of PU foam with density 35± 2 kg/cu.mtr. The back is made of PU foam with density 40± 2 kg/cumtr upholstered.. The Frame base has Webbing for Supporting the Cushions. The Complete Sofa Body has Polyurethane Foam in desired shape. The Sofa is supported on Metal Legs powder coated. Fabric colour and type as per directions of Engineer in Charge. 2 Seater 1500mmW X770mmDX705mm± 5% Make:- EPIC Woodberg/Geeken/Wipro/Durian

Stage Drappery

SITC of On Stage Fixed Valance Bar 13 Mtrs Length Straight as per the design made out of 40NB 48 OD Mild steel pipe dual barrel, supported to hang the Main Valance of the stage system duly powder coated with matt black texture finish paint. Preffered Make- CANARA LIGHTING/TECHVQ/BASEL

SITC of High quality Velvet fabric as per approved colour and make with a gathering of 50% stitched as per site condition, curtain provided with eyelets at every 200/250mm for uniform fixing on to curtain trollies (For Main Valance) Size: 13 Mtr x 1.2Mtr. Preffered Make- CANARA IGHTING/TECHVQ/BASEL

SITC of Motorized Main Curtain 13 Mtrs straight Centre partting as per design Made up of I Track for complete length Overlap of 0.5~0.9 Mtrs. Trollies uniformly distributed along the track at every 200/250mm with a master trolley. Open and close limit controller. Motor Cable termination box Drive unit with suitable capacity of motor unit, GI Wire rope. Black texture finish paint. All metal parts are powder coated;Preffered Make- CANARA LIGHTING/TECHVQ/BASEL

SITC of High quality Velvet fabric as per approved colour and make with a gathering of 50% stitched as per site condition, curtain provided with eyelets at every 200/250mm for uniform fixing on to curtain trollies (For Main Curtain) Size:13Mtr x 5 Mtr. Preffered Make- CANARA LIGHTING/TECHVQ/BASEL

AV Solutions

Supply of 15", 2 Way, bi-ampable Array speaker having 1.75" or bigger HF compression driver. The speaker should have Freq. Response (-3 dB): 70 Hz - 14 kHz, Frequency range (-10dB) 42 Hz - 18 kHz, sensitivity (1W/1m) ≥ 100 dB SPL, delviering Max SPL ≥ 134dB with power handling ≤ 500W @ 8Ω. The speaker should have a nominal impedance of 8 ohm .The speaker should have a rotatable horn with coverage angle of Horizontal: 90°/60° & Vertical: 60°/90°.Speaker must haveat least 20 suspension points. (Approved Makes: Bose, Nexo, Electro-Voice)

Supply of 18" Subwoofer with a Frequency Range (-10dB):- 28Hz-280Hz ; Axial Sensitivity > 93dB & Long Term Power Handling of ≤ 400W (at a Nominal Impedance of 8 Ω). The Loudspeaker should have a Max. SPL of >132dB. (Approved Makes: Bose, Nexo, Electro-Voice)

Supply of 8" Two-way portable Speaker with one 1.25" HF compression driver with a Frequency Response(-3dB):- 68Hz-20KHz; Frequency Range (-10dB):- 56Hz-20KHz & Long Term Power Handling of ≤ 250W (at a Nominal Impedance of 8Ohms). The Loudspeaker should have sensitivity of >89dB & Max. SPL of >123dB.The Sound Dispersion should be at least 90x55 Degress. (Approved Makes: Bose, Nexo, Electro-Voice)

Supply of 5.25" two-Way Speaker with a Frequency Response(-3dB):- 90Hz-20KHz; Frequency Range (-10 dB) : 55 Hz - 20 KHz; & Long Term Program Power Handling of ≤ 75W (at Nominal Impedance of 8ohms). The Loudspeaker should have a Sensitivity(1W/1m) > 88dB with a Max. SPL (Peak) >113 dB. The Sound Dispersion should be 90x90 Degrees or more; Transformer Taps @ 70/100V - 7.5W, 15W, 30W. The Speaker Should have environmental specs of IP54 (per IEC-60529) & should Come with OEM wall Mounting Bracket. (Approved Makes: Bose, Nexo, Electro-Voice)

Supply of 2 channel class D/H Power amplifier with built in Audio Digital Signal Processor, a Maximum Output Power ≥ 900W@8 ohms, ≥ 1750W@4 Ohms for single channel operation;Max Bridged Output Power ≥ 5500W @ 4 ohms,Frequency Response (+/- 1dB) ref. 1 KHz:15Hz - 20 KHz,Max input level:+21dBu,Crosstalk< - 80dB,input impedence:20kohm,signal to noise ratio >109 dB,with built in Digital Signal processor like - 31 Band Graphic Equalizer per channel, Parametric Equalizer per channel, Output delays, Audio Limitters, Audio Filters (Approved Makes: Powersoft, Electro-Voice, Dynacord, Lab Gruppen)

Supply of 2 channel Power amplifier with built in Audio Digital Signal Processor, a Maximum Output Power ≥ 450W@8 ohms, ≥ 900W@4 Ohms for single channel operation; Max Bridged Output Power ≥ 2700W @ 4 ohms,Frequency Response (+/- 1dB) ref. 1 KHz:15Hz - 20 KHz,Max input level:+21dBu,Crosstalk< - 80dB,input impedence:20kohm,signal to noise ratio >105 dB,with built in Digital Signal processor like - 31 Band Graphic Equalizer per channel, Parametric Equalizer per channel, Output delays, Audio Limitters, Audio Filters (Approved Makes: Powersoft, Electro-Voice, Dynacord, Lab Gruppen)

Supply of 22 channel Compact Mixing System (18 x Mic/Line + 4 x Mic/Stereo-Line), Auxiliarys (MON, FX, AUX) : 2 Pre, 2 Post, 2 Pre/Post switchable, Frequency Response, -3 dB, ref. 1 kHz : 15 Hz to 65 kHz, Crosstalk, 1 kHz Channel to Channel < -80 dB, THD at 1 kHz < 0.005%, CMRR MIC input 1 kHz > 80 dB, Dual stereo 24/48-bit multi effects processors, 100 Factory + 20 User, Tap-Delay, Digital Audio Interface Channels : 4 In / 4 Out, AD/DA Conversion, Sampling Rate : 24-bit, 44.1 / 48 / 88.2 / 96 kHz (Approved Makes: Dynacord, Midas, Allen & Heath)

Supply of Corded Vocal Microphone with Dynamic Neodymium Magnet microphone element,with frequency response 80Hz-16kHz,Super-Cardioid polar pattern,sensitivity of 2.2mV/Pa and output impedence 600 ohm (Approved Makes: Audio Technica, Senheiser, Electro-Voice)

Supply of Corded Instrument Microphone with Self Biased condensor microphone element ,with frequency response of 55Hz-16kHz ,Cardioid polar pattern,sensitivity of 5.5mV/Pa ,rated impedence of 200 ohm ,maximum spl :130dB SPL and dynamic range ;107dB (Approved Makes: Audio Technica, Senheiser, Electro-Voice)

Supply of Handheld Wireless Mic with the following specifications - Transmitter: 1. Frequency Response - 30 Hz to 16 KHz 2. Polar Pattern - Cardioid/ Supercardioid 3. Sensitivity > 5.2 mV/Pa 4. RF Output Power - 50 mW 5. Should have the provission of changing Microphone heads Receiver: 1. Bandwidth - 36 MHz 2. Carrier Frequency Range - 480 to 865 MHz 3. Signal to Noise Ratio > 100 dB A 4. Frequency Response - 55 Hz to 16 KHz (Approved Makes: Audio Technica, Senheiser, Electro-Voice)

Supply of Headworn Wireless Mic with the following specifications - Transmitter: 1. Frequency Response - 30 Hz to 18 KHz 2. Polar Pattern - Cardioid/ Supercardioid 3. Sensitivity > 0.5 mV/Pa 4. Maximum SPL > 129 dB 5. RF Output Power - 50 mW Receiver: 1. Bandwidth - 36 MHz 2. Carrier Frequency Range - 480 to 865 MHz 3. Signal to Noise Ratio > 100 dB A 4. Frequency Response - 65 Hz to 16 KHz (Approved Makes: Audio Technica, Senheiser, Electro-Voice)

Supply Installation Testing & Commissioning of a 2.5 Sq. mm, 2 Core Speaker Cable with the below specifications:- Core Arrangement : 2, Gauge : 2.5 sq. mm Material : Stranded Bare Copper - Oxygen Free, Shielding : Unshielded, Jacket Material : TPR, Bend Radius: 4x Diameter Approved Makes: LYNQ, Sommer, Belden, Netmas

Supply , installation , testing and commissioning of UL Listed Connectors as per specifications & direction of E/I. Approved Makes: LYNQ, Neutrik, Northfit, Amphenol, Switchkraft

Supply, Erection, Testing & Commissioning of of 27 U Rack with wheels. Reputed Make

Supply, fitting, fixing, commissioning and testing of 35 Sq. MM Copper Conductor Multi strand PVC Sheilded FRLS Wire with suitable Copper LUGS for Battery Interconnection and suitable 50 Sq. mm copper wire of 4 length of 10 mtrs each for UPS to Battery excluding cable from PANEL to UPS and UPS to panel. Make- Polycab/Havells/KEI

Supply , installation , testing and commissioning of Large Active LED Wall Display of Size 13.78 Ft x 7.75 Ft Approx having the detailed specifications as follows. It hould have pitch name-P2,5,Pixel Configuration-Single SMD,Pixel Pitch(mm)-2.5,Module Resolution (WxH)-120x135,Module Dimensions(WxH,mm)-300x337.5x13,No. of Modules per Unit Case (WxH)-2x1,Resolution -16800x945 or better,Unit Case Surface Area (㎡)-0.2,Physical Pixel Density (pixels/㎡)-160000,Flatness of Unit Case (mm)-±0.3,Unit Case material-Die-casting Aluminum,Service access-Front,Min. Brightness (After Calibration)--600,Color Temperature-3,200~9,300,Visual Viewing Angle (Horizontal)-160,Visual Viewing Angle (Vertical)-150,Brightness Uniformity-97%,Color Uniformity-±0.003Cx,Cy,Contrast Ratio-5000:1,Processing Depth (bit)-14,Power Consumption (W/Unit, Max.)-93,Power Consumption (W/Unit, Avg.)-36,Power Consumption (W/㎡, Max.)-460,Power Supply (V)-100 to 240, Frame Rate-50/60HZ,Refresh Rate (Hz)-3840,Lifetime (Half brightness)-100000,Operating Temperature- -20 Degree Cel to 40 Degree Cel,IP rating Front & Rear-IP50,,Preferred Make- Barco/Christie/LG.

SITC of HD Scaling Auto-Switcher & HDMI® over CATx Extender with Wall Plate Transmitter and surface mount receiver Black in colour to be installed at Stage Table(Transmitter) and Rack side(Receiver); Prefferred Make-Crestron/Lightware/Key-Digital

Supply and Laying of HDMI ‐ HDMI Cable 1.8 Mtrs, Preferred Make-Crestron/Extron/Lightware

Supply and Laying of HDMI ‐ HDMI Cable 5 Mtrs, Preferred Make-Crestron/Extron/Lightware

SITC of 4K 55 Inch LED PANEL with Following Specifications ; Features – Specifications Screen Size - 55 Inch or Higher LED Back Lit. Panel Technology – IPS Native Resolution - 3840 x 2160 (UHD) Brightness - 300 cd/m2 Contrast Ratio - 1,100 : 1 or more Dynamic CR - 500,000 : 1 or higher Orientation – Landscape Viewing Angle(H x V) - 178 x 178 Operation Hours - 16 Hrs Connectivity Input Ports Digital - HDMI(3), External Control - RS232C(1), RJ45(1) USB - USB x 1 Output Ports Digital Optical /Digital out -1 Audio Power - 20W(10W x 2) Additional feature - Inbuilt : Wi-Fi, Screen Sharing feature, Web Link, Built in Signage Media Player. Power Supply - 100 – 240 V, 50/60 Hz Certifications(Safety/EMC/E RP) - BIS,CE,FCC Wall mount - Required Preffered Make- LG/Samsung/Cristie

SITC of 4K Transmitter HDMI bidirectional RS232 and IR over high definition base1, Make-Prefferred Make-Crestron/Lightware/Key-Digital

SITC of 4K Receiver HDMI bidirectional RS232 and IR over high definition base1, Make-Prefferred Make-Crestron/Lightware/Key-Digital

SITC of rack-mountable 4K60 4:4:4 presentation system 04 HDMI®, two pairs of mirrored HDMI and DM Lite outputs with 4K60 scalers, and analog audio inputs and outputs.Should include support of HDR (High Dynamic Range) and Dolby Vision video formats, audio mixing, advanced EDID management, XiO Cloud connectivity, and enterprise-grade security.Ethernet for connectivity to network,USB for Programming; Preferred Make-Crestron/Extron/Lightware

SITC of 1:4 Distribution Amplifier-high-performance 4K AV distribution amplifier designed to split a single HDMI® signal to feed up to four separate displays, switchers, and/or other devices. It provides full support for UHD and DCI 4K60 4:4:4 and HDR video, HDCP 1.4 or 2.2 copy protection, and high-bitrate 7.1 audio, to ensure optimal performance and compatibility for any HD or 4K video application; Prefferred Make-Crestron/Lightware/Key-Digital

Supply and fixing of FOH and stage light bar suitable for hanging of stage lights. made out of 48dia M/S pipe including all fixing arrangement as clamps, Craft ’hardware with powder painting complete as required as per side condition. -customized as per direction of Engineer-in- Charge. Make : Canara Lighting/Robe/Basel/TechVQ

Supply of LED profile 200W 36* voltage0-90-250v/ 50- 60 hz, working position: Any safe working position, lamp: super high power LEDs; white 180w (cool white or warm white) average life time is over 5000h, CRI: > 90, Lens angle :19*/26*/36*, optinal, LED display channel-2 ch, IP rate :IP 20 indoor, speacial zoom funcation with manual adjustment, control mode: master /slave synchronization, DMX 512 control and automatic ,run ,construcation :die-casting aluminium housing silver white and black,optinal. all complete as per direction of Engineer In Charge Make : Canara Lighting/Robe/Basel/TechVQ

Supply of 54 LEDs 3W 15° (Warm white) portable, lightweight luminaries, high intensive light with low heat output, Very robust luminaries, suitable for indoor Public and commercial buildings, Music festivals, stadiums, theme parks, Stages, Exhibition halls. digital display, no fan required, light output: 4,200 lm, Up to 16.7 million colors, Dimming range: 0...100 % built-in control of statics, auto, sound, DMX512 monitoring , Strobe effect, Lifetime: up to 30,000 h with beam angle: 15°, 30°, 45°, 60°, IP20. Auto play with internal programs, aster/Slave function, Standalone mode. Power supply: AC 100V-AC 240V 50/60 Hz. Light power consumption: 162W. as per direction of Engineer-in Charge. Make : Canara Lighting/Robe/Basel/TechVQ

Supply of Indoor LED par 54 LED Par 165w, voltage 110v-250v/50-60HZ, lamp-TX high power LEDS; 3w x54 LED, RGB working position; any safe working position LED display, channel-4/5/7 CHS, Beam Angle- 15/25/45/600, IP Grad-IP20, control mode- master/slave synchronization, DMX-512 control and auto matic run funcation, construcation- Aluminium and plastic body, silver, white and black optional. all complete as per direction of Engineer In Charge. Make : Canara Lighting/Robe/Basel/TechVQ

Supply & installing of LED 200W SPOT Fresnal light, Output Lux @ 2m (Minimum facula) 7500 Lux, Light source LED Qty. 2000W COB LED, Electrical Input voltage 100-240VAC, Power 160W, Make- customcomplete as per direction of Engineer in- Charge. Make : Canara Lighting/Robe/Basel/TechVQ

Supply, Installation, testing & commisioning of Moving Head Sharpy Light 230W, POWER SUPPLIES 110-240V 50/60 Hz, INPUT POWER, LAMPSOURCE Discharge lamp with a short arc burner in a reflector system - Type: YODA MSD Platinum 7R,- Output Lamp power: 230W- Colour temperature: 8,500 K,- Average life: 2,000 h Make : Canara Lighting/Robe/Basel/TechVQ

Supply, Installation, testing & commisioning of Moving Head Sharpy Light 380W, POWER SUPPLIES 110-240V 50/60 Hz, INPUT POWER, LAMP SOURCE Discharge lamp with a short arc burner in a reflector system - Type: YODA MSD Platinum 7R,- Output Lamp power: 230W- Colour temperature: 8,500 K,- Average life: 2,000 h OPTICS, 3-lens optical group combination, Focus: electronic Light output at 8 meters (25 feet): 59,760 lux, COLOR SYSTEM Inter changeable color wheel with 14 colors + open EFFECTS SECTION, Inter changeable gobo wheel with 17 fixed gobos + open, High speed shake effect, 8-face rotating prism SHARPY 23, Frost filter, Mechanical shutter and adjustable speed strobe effect, Mechanical dimmer, CONTROL AND PROGRAMMING 16 DMX 512 control channels SOURCE Discharge lamp with a short arc burner in a reflector system - MOVING BODY. Travel:- PAN = 540° -TILT = 50° ELECTRONICS, Function reset from the lighting desk ON/OFF lamp control from the lighting desk" AUTOTEST" function from menu Electronic monitoring with status error SAFETY DEVICES Bipolar circuit breaker with thermal protection. Automatic break in power supply in case of overheating or failed operation of cooling system. Forced ventilation with axial fans. Hanging system: with fast-lock omega clamps (1/4 turn) on the base. all complete as per direction of Engineer In Charge Make : Canara Lighting/Robe/Basel/TechVQ

DMX Splitter: Supply Of Dmx Splitter With One Input And Six Outputs With Complete Internal Wiring And All Output Electricallyisolated From Input. Splitter Shall Be Suitable For One Dmx Universe And All Connections Shall Be Through 3/5 Pin Xlr Connectors Complete With Electrical Input Wire Etc All Complete As Per Direction Of Engineer In Charge. Make : Canara Lighting/Robe/Basel/TechVQ

SITC of Digital Lighting Console with 1024 DMX channels • 1024 Channels. • 96 Fixtures. • 96 Dimmer Control Channels. • Time control of scenes: Fade in/out, LTP slope • Channels for each fixture 40 primary + 40 fine tune • LCD display with back light • 60 Scenes/Playbacks • 10 Scenes to run simultaneoulsy • 600 Scene step • Shape generato: Shapes of Dimmer, Pan/Tilt, RGB, CMY, Color, Gobo, Iris and Focus • Master slider - Global, playback, fixture • USB Memory - FAT32 supported as per direction of Engineer-in- Charge. Make : Canara Lighting/Robe/Basel/TechVQ

Supply of DMX Point Wiring complete with 2 core 23/0.2 Cu PVC sheathed sheilded cable having impedence not less than 100 ohm from splitter to light fixtures & between light fixtute to light fixture as required. as per direction of Engineer-in- Charge Make : Canara Lighting/Robe/Basel/TechVQ

SITC of Power Distribution Electrical panel having a Incomer of 125A, floor mount / rack mount / wall mount Nuetral separation made using incomer of L&T or Schneider make, Voltmeter, Ammeter display for reading visualization Individual MCB control for 43 outgoing circuits RYB Phase indicators internally wired using IS certified wires and cables Provided with ivery connectors for the internal terminations and external outgoing connecting points Custom built as per specification and project requirement.Make : Canara Lighting/Robe/Basel/TechVQ

Clamp Make : Canara Lighting/Robe/Basel/TechVQ

GODAWARI ENTERPRISES (BID ID -669514)

M/S GIRI ENTERPRISES (BID ID -669511)