8863/E8

Taking down Cement Plaster of any description on Brick Walls, Concrete Surfaces including racking out joints, hacking for key, scrubbing down with Water, remove dust, debris/ rubbish, etc., complete all as specified and as directed.

Dismantling Floor, Hearth or Wall Tiling including Cement Mortar Bedding (but not backing), and removing rubbish off the Premises, complete all as specified and as directed.

Taking out unserviceable steel poles of any type and any sizes from the site of work complete all as specified and directed.

M & L for Scraping, cleaning and preparation of surface of all steel tubular sewaged pole 9 mtr long, cross arms, clamps GI street light bracket etc and applying two coat of aluminium paint including writing pole number & bottom of pole painted with black paint with yellow strip allround between the juction of aluminium paint and black paint complete as directed and specified.

S&F for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet reinforced with M.S. Square tube, fixing in opening as per Specifications and Drawings shown in MES Schedule Part-II, complete all as specified and as directed.

S&F Plain Colour Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing etc complete all as specified and as directed.

S&F Second Class Hardwood Plain, Solid, Straight Chowkats and Frames, Wrought, Framed rebated on the Solid, Rounded or Chamfered, put together with Glue, Pinned at Joints, complete all as specified and as directed.

0 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules ofelasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note: (1) For WPC solid door/window frames, minus 5mmtolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. (2) (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).

S&F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides fitted to chowkhats complete all as specified and directed.

M&L Second Class Hardwood 35mm thick Plain Framed Panelled Door Shutter (any Number of Panels) with Panel of 12mm thick BWP Commercial Ply or Veneered Particle Board with commercial face veneers on both faces and fitted to Wooden Chowkat, complete all as specified and as directed.

S&F 20 mm dia Fancy type, Chromium Plated colour coated ( any coloured) curtain rod fixed to bracket/ pelmet box complete all as specified and as directed.

S&F in repair Powder coated anodised aluminium sliding fly proofing window, three tier (two shutter of glass and one shutter on wire mesh) without glazing bar, window shutter style shall be 40mm X 19mm, sheet thickness 1.5mm ,sliding channel 3mm htick channel width shall be as required and directed by Engr-in-Charge with roller. Frame (Chowkats) of window shall be 75mm X 60mm X 1.5mm thick section with or without rebate with 5.5mm thick tinted glass and galvanised wire cloth 0.36mm nominal dia of wire and average width of aperture 1.18mm aluminum glazing clips fixed with rubber gasket locking arrangement all as directed by Engr-in-Charge.

Cutting chase, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of laddings, steps, cills, sushades, shelves, lintels etc and cutting chase for concealed water tubing or concealed coduit wiring etc and making good cutting grith n exc 10 cm on brick walls complete all as specified and directed.

M&L Rendering 15mm thick in Cement Mortar 1:6 not exceeding 3sqmeach patch on fair surface on Brick Walls or on Concrete Surfaces, finishing plastered surfaces Even and smooth without using Extra Cement complete all as specified and as directed.

M&L Rendering 15mm thick in Cement Mortar 1:6 on Brick Walls or on Concrete Surfaces, finishing plastered surfaces Even and fair complete all as specified and as directed.

Material and labour for preparation of existing old wall surface and applying one coat of oil bound distemper (any colour/tint) on wall surfaces complete all as specified and directed.

M&L for Preparation of new plastered surfaces and applying two coats of oil emulsion distemper (any colour/tint) over a coat of primer over 2 mm thick wall care putty on ceiling surfaces including rubbing with emmery paper to make surface smooth and even complete all as specified and directed.

M&L for Preparation of new plastered surfaces and applying two coats of oil emulsion distemper (any colour/tint) over a coat of primer over 2 mm thick wall care putty (Birla/Asian) on wall surfaces including rubbing with emmery paper to make wall surface smooth and even complete all as specified and directed.

M&L Preparing old Wooden Surfaces of any description not otherwise decribed over 10 Cm width or girth and applying One Coat of Synthetic Enamel Paint (First quality), complete all as specified and as directed.

M&L Preparing old Steel Surfaces of any description not otherwise decribed over 10 Cm width or girth and applying One Coat of Synthetic Enamel Paint (First quality), complete all as specified and as directed.

S&F work in repair for 20mm outer dia of CPVC water tubes SDR 11 with all fittings SDR 11 and fixed complete to walls and ceilings or laid in floors including taking down of old pipe complete all as specified and directed

S&F in repair UPVC (SWR) 110mm bore Branch pieces, double (equal or unqual), ordinary or inverted (spigot or socket type) or with parallel branches or fitted with oval access doors and Jointing with Solvent Cement complete all as specified and directed.

S&F in repair UPVC (SWR) 75mm bore Branch pieces, double (equal or unqual), ordinary or inverted (spigot or socket type) or with parallel b

ranches or fitted with oval access doors and Jointing with Solvent Cement complete all as specified and directed.

S & F in repair PVC tank lid/cover for water storage tank capacity of 250 to 2000 ltrs to matching with existing tank with fixing arrangement complete all as specified and directed.

S & F in repair 100mm dia stainless steel grating with hole/without hole for waste pipe fixed over floor/nahani trap complete all as specified and directed

Disconnecting existing tanks of capacity exc 250 & not exc 2000 liters setting aside (or lowering, hoisting if required) for repairs & scrubbing cleaning, thoroughly removing all scale and dirt, mud sediments, silts etc from the internal surfaces of PVC/RCC water storage tanks (bottom and wall) by using brushes, bleaching powder and other cleaning materials as required and removing vegetation/ Algae around the over head tank after opening tank cover, inlet, outlet etc and reconnecting with GI/CPVC tubing and re-fixing in position , refixing the cover after cleaning all and specified and directed. Note: While cleaning Any CI/GI/PVC pipes and fittings, Float valve damaged during work shall be replaced by new one to insure leakage / seepage free joint without any extra cost to the department and Unit rate quoted by tenderer shall includ for use of all scaffolding, protective measures etc up to twelve storeys height of bldgs.

S&F Stainless Steel Sink with Drainage Board l.0mm thick Overall size 915mm x 460mm and Bowl size 410 mm x 355 mm x 165 mm for Kitchen or Laboratory with Plugs, Washers, Brass chromium plated Waste Fitting 32mm dia, PVC waste pipe, a Pair of Cast Iron Brackets duly Painted including Cutting and Pinning in Ends, making good disturbed Surfaces in Cement Mortar 1:3 including Taking down/out unserviceable Sink and connected Items, complete all as specified and as directed.

S&F in repairs Stainless steel sink, 1.00mm thick for kitchen or laboratory, with plug, waste pipe, washers, including cantilever cast iron brackets, connecting union etc., overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm etc incl 40mm dia waste pipe complete including taking down/out unserviceable Sink and connected Items, complete all as specified and as directed.

S&F Rotational Moulded Polyethylene (HDPE) Water Storage Tank 500Litre Capacity (Cylindrical Vertical with Closed Top), Black in Colour, Three Layered Construction, hoisted and fixed in Position all specified in MES Schedule Part-I including provision of 25mm x 100mm GI nippples with check nuts for inlet, outlet wash, float valve and overflow pipealongwith PTMT Ball Valve 20mm dia , high pressure with epoxy coated Aluminium Rod and high density Plastic Ball, screwed for Iron Pipe including Lowering of old/unserviceable Water Storage Tank of any description, complete all as specified and as directed.

S&F Rotational Moulded Polyethylene (HDPE) Water Storage Tank 1000Litre Capacity (Cylindrical Vertical with Closed Top), Black in Colour, Three Layered Construction, hoisted and fixed in Position all specified in MES Schedule Part-I including provision of 25mm x 100mm GI nippples with check nuts for inlet, outlet wash, float valve and overflow pipealongwith PTMT Ball Valve 20mm dia , high pressure with epoxy coated Aluminium Rod and high density Plastic Ball, screwed for Iron Pipe including Lowering of old/unserviceable Water Storage Tank of any description, complete all as specified and as directed.

S&F Rotational Moulded Polyethylene (HDPE) Water Storage Tank 2000Litre Capacity (Cylindrical Vertical with Closed Top), Black in Colour, Three Layered Construction, hoisted and fixed in Position all specified in MES Schedule Part-I including provision of 25mm x 100mm GI nippples with check nuts for inlet, outlet wash, float valve and overflow pipealongwith PTMT Ball Valve 20mm dia , high pressure with epoxy coated Aluminium Rod and high density Plastic Ball, screwed for Iron Pipe including Lowering of old/unserviceable Water Storage Tank of any description, complete all as specified and as directed.

S&F in replacement Vitreous China White Squatting Pan ‘ORISSA’ Pattern, size 580x440mm with ‘P’ or ‘S’ Trap, Integral Foot Rest, providing Joints between Flush Pipe and Socket of WC Pan including Flushing Cistern and Flush Pipe, fixing with and including provision of cement Concrete Bedding complete all as specified and as directed.

Supply and fixing in repair 10 litre capacity low level PVC flushing cistern (any colour), syphonic action type, with inlet, ball valve, float, handle, fixed with cast iron bracket (of suitable size) and providing 32 mm dia PVC flush pipe and making all necessary connections complete as directed.

S&F in repair stainless steel utencil plate rack of size 900 x 1200 x 200 mm using 1.0mm thick sheet with all fittings accessories complete as directed.

S&F Vitreous China Colour Wash down Water Closet Pan (Pedestal Pattern) with "p" or "s" trap front or back inlet including fixing Bolts with and excluding low level Flushing Cistern matching with water closet colour with inlet ball valve float handle and providing 32mm dia PVC flush pipe including plastic water closet seat with flat bottom cover (coloured) fixed with mild steel chromium plated or aluminium hinging device including taking down old unserviceable one complete all as specified and as directed.

S&F Vitreous China, semi-pedestal pattern (Anglo-Indian Type) with "p" or "s" trap front or back inlet including fixing Bolts with and excluding Flushing Cistern matching with water closet colour with inlet ball valve float handle and providing 32mm dia PVC flush pipe including plastic water closet seat with flat bottom cover (coloured) fixed with mild steel chromium plated or aluminium hinging device including taking down old unserviceable one complete all as specified and as directed.

S&F PVC bathroom cabinet box with mirror, shutter type of size 500X400 fixed on walls with wooden plugs and and chromium plated brass screw and cup washer as in repair complete all as specified & directed.

S&F EWC Cascade type (coloured) floor mounted water closet with low level flushing cistern coloured with floor trap, PVC coloured seat cover and connecting pipe etc and making all necessary connections etc as in repair complete all as specified and as directed.

S&F in repair only cascade/concealed type flushing cistern including cleaning and replacing of washers, syphon inlet accessory with complete fittings and fixtures etc all as directed in day to day maintenance.

S&F Vitreous China Wash Hand Basin 550x400mm in size, White (Flat Back or Angle Back Type) with 32mm dia Brass Chromium Plated Waste Fitting, a pair of Cast Iron Brackets duly painted including Cutting and pinning in Ends, making good disturbed Surfaces in Cement Mortar 1:3 including taking down/out unserviceable Wash Hand Basin and connected Items, complete all as specified and as directed.

S&F in repairs Plastic seat cover white for EWC with flat bottom incl hinging device complete all as specified & directed.

S&F Chromium plated bottle trap ( with internl partitions) 32mm size with 250mm long wall connection including wall flange fixed in position with necessary fixing arrangement as in repair complete all as specified and directed.

M&L for cleaning of floor and wall existing surfaces,sanitary fittings etc with the help of harpic/Roff/Lizol brand chemical or equivalent complete all as specified and directed.

S&F Chromium Plated waste coupling heavy full thread 32mm (brass) fixed to stainless steel sink including necessary fixing arrangement as in repair complete all as specified and directed.

S&F Stack clamps out of 50mm by 5mm flat iron and 16mm dia bolt round iron stays including bolts and nuts and securing ends of stays to wall or roof Bore in pipe in 75mm to 150mm complete all as specified and directed.

S&F in repair fancy type bib cock 15 mm bore cast copper alloy chromium plated with crutch or butterfly handle screwed for iron pipe brass ferrule etc. complete all as specified & directed

S&F Two way bib cock with flange brass chromium plated fancy type screwed for 15 mm bore etc.as in repair complete all as specified and as directed.

S&F 125 mm dia brass chromium plated shower rose with or without swivels joint for fixing to 15 mm bore pipe etc complete including taking down old one complete all as specified and directed.

S&F Brass chromium plated fancy type pillar tap screwed for 15 mm bore of pipe etc.incl necessary fittings & fixtures as in repair complete all as specified & directed.

S&F Towel ring of size 150mm dia decorative type fixed with walls including necessary fittings etc as in repair complete all as specified and as directed.

S&F Brass chromium plated tubular towel rail, 20mm dia, D type, 60,cm long between flanges as in repair complete all as specified and directed.

S&F Toilet paper holder of brass chromium plated fixed to walls with chromium plated brass screw including necessary fixing arrangement as in repair complete all as specified and directed.

S&F Chromium Plated soap dish fixed to wall with necessary fixing arrangement as in repair complete all as specified and directed

S&F Glass shelf assembly consisting of 5.5 mm thick sheet glass self 19-12 cm wide, 60 cm long with chromium plated brackets guard and railing fixed in position with necessary fixing arrangement as in repair complete all as specified and directed.

S&F Glass corner shelf of single set with chromium plated brackets and railing including necessary fittings and fixture as in repair complete all as specified and directed.

S&F Central hole for Hot and Cold water supply basin mixer, brass chromium plated screwed down for iron pipes,including necessary fittings etc as in repair , complete all as specified and as directed.

S&F 3-in-1 wall mixer for Hot & Cold water supply with telephonic shower arrarengement, brass chromium plated fancy type, screwed down for 15mm bore iron pipe incl necessary fittings & fixtures etc.as in repair complete all as specified and directed.

S&F CP Kitchen sink mixture with regular swinging spout (wall mounted model) chromium plated screwed down for iron pipes,including necessary fittings etc as in repair complete all as specified and as directed.

S&F health faucet with chomium plated with flexible cord fixed on wall screwed down for iron pipes,including necessary fittings

Cleaning of blocked kitchen trap / nahani trap / floor trap/ Water closet of any type / pattern with vaccum pump upto 1st manhole and making the drain channel fully functional by flushing with sufficient quantity of water to entire satisfaction of Engineer-in-Charge including cleaning of 1st manhole and removing the waste materials / sludge etc to a distance outside residential area and burying the same in a pit and spreading bleeching powder surrounding the area @ 1Kg/ Sqm and sealing the top with fine sand of suitable depth complete all as specified and as directed. Note:-(i) Cost of earth work in excavation required for digging the borrow pit and burrying the the waste materials / sludge in the borrow pit and sealing the pit with fine sand and spreadind of bleeching powder shall deemed to be included in the rate quoted. (ii) Any damged done by the Contractor during cleaning shall be make good by the Contractor at his own cost upto the satisfaction of Enginner-in-Charge.

etc as in repair complete all as specified and as directed.

M&L Pre-laminated Particle Board 18/19 mm thick, interior grade, pre-laminated one side with decorative choice lamination and other side balancing white lamination fixed with Screws to Timber Frame Work as in cup board shelf ,Pelmet Box or in narrow widths not exc. 15 Cm each, rebated or flat edged, properly seal with 2nd class hardwood beading after taking down old unserviceable boards complete all as specified and as directed.

S&F PVC (SWR) Nahani/Floor Trap 100mm bore (dia) Outlet, Plain with Grating and Jointing with Solvent Cement, including taking down old one complete all as specified and as directed.

M&L for Repair for joint leakage in steel water tube by replacing of GI elbow/socket/reducers/nipple/union/bend/tee of any length 15mm bore medium grade ISI mark of complete all as directed.

M&L for Repair for joint leakage in steel water tube by replacing of GI elbow/socket/reducers/nipple/union/bend/tee of any length 20mm bore medium grade ISI mark of complete all as directed.

S&F Angular Stop cock ,15 mm dia cast copper alloy chromium plated fancy type with wall flange screwed for iron pipe etc. as in repair complete all as specified and directed.

M&L in repairs for leaking water in brass/CP bib tap, pillar tap, concealed stop cock, angle valve of any make/ description/size in any position by replacing the (brass spindle+brass jumper washer) ,tightening of fittings etc ,also removing air lock, blockage in water pipe line & make the all system fully functional to the entire satisfaction of Engr-in-Charge complete all as specified and directed

M&L in repairs for (PVC Syphon assembly (internal kit) for any type/size/make of low level flushing cistern,tightening of fittings etc & make the all system fully functional to the entire satisfaction of Engr-in-Charge complete all as specified and directed.

(i) M&L Preparing Masonary surfaces cracks, large pores, dents or damaged portion with smart care crack seal. (II) M&L Applying two coats of smart care damp block 2K slurry by brush or roller over brick masonary surfaces,Allow 1st coat to dry for 4-6 hrs and then apply 2nd coat . (III) Applying a coat of 2mm thick acrylic wall putty (Make JK/Asian/Birla) (VI) Applying a coat of interior wall primer after smoothing wall putty surfaces with sand paper and two coat of acrylic oil bound distemper complete all as specified & directed. Note : Mixing of smart care damp block 2k , 60% powder and 40% liquid and use mechenaically stirrer

M&L for Repairs to any type of Aluminium Doors, AluminiumWindows, Aluminium Ventilators, Aluminium Louvers, Aluminium CB shutters etc of any description, in any situation by taking down & refixing shutter including replacement of rubber neoprene packing, aluminum snap beading, screws & tightening, adjustment etc ,making smooth functioning (proper closing, opening) etc with entire satisfaction of Engineer-in-charge complete all as specified and directed.

M&L for complete removal of damage plastered surfaces by mechanical means using electrical operated grinder, washing down and any kind of damage painted surfaces and old plastered surfaces of wall (II) Preparing unplastered surfaces cracks, large pores, dents or damaged portion with smart care crack seal. (III) Applying two coats of smart care hydroloc without any dilution with paint brush @ 7Sqm/Ltr and allow it to dry for 6-8 hrs after first coat. (IV)Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished the surfaces even and smooth without using extra cement (V) Applying a coat of 2mm thick acrylic wall putty (Make JK/Asian/Birla) (VI) Applying a coat of interior wall primer after smoothing wall putty surfaces with sand paper and two coat of acrylic oil bound distemper complete all as specified & directed.

Cutting/uprooting of tree from walls of bldgs. up to extended root and spraying of acid of required qty at any location of bldg up to 4 storied & making good disturbed surfaces with CM 1:4 or cement concrete (1:3:6) type C1 using 20mm graded aggregate including necessary scaffolding/ through rope with safety belt for size of tree of girth 5 to 10 cm complete all as specified and as directed by Engr -in-charge.

Cleaning of under rain water / waste pipe of any dia by rodding / bamboo split including removing and refixing of eye cover in exesting positiob and taking out waste and foreign materials and flushing with sufficient quantity of water etc. and cutting of the bushes both side of sewage line upto 0.5 mtr each side and throwing the waste materials into non residential area or near by drain / nallahand including cutting the bushes surrounding the sewage line upto 0.50m complete all as specified and as directed. Note:-(i) Once cleaned the sewage lines, the Contractor shall maintain the lines functional upto the date of Completion at his own cost. (ii) Any damged done by the Contractor during cleaning shall be make good by the Contractor at his own cost upto the satisfaction of Enginner-in-Charge.

Taking down existing broken inspection eye cover from soil/waste/rain water pipe from any height any position and supply and fix new CI eye cover with rubber washer and nut bolts for 100/75 mm dia pipe incl necessary scaffolding and safety measurers complete all as directed by Engineer-in-Charge.

M&L in repairs for leaking water in brass/CP Wall Mixer, basin mixer, sink mixer of any make/ description/size in any position by replacing the brass spindle & washer, tightening of fittings etc ,also removing air lock, blockage in water pipe line & make the all system fully functional to the entire satisfaction of Engr-in-Charge complete all as specified and directed

M&L for Petty repairs to wardrobes, cupboard, kitchen cabinet, Showcase items of any description in any situation including Resecuring,easening of shutters, shelf etc including taking down and refixing in position with new nut, screw ,washer etc including adjusting, tightening of builders hardware such as lock,wiremess,glass pane, Ball catches, knobs ,hasp and staple ,piano hinges,handles & refixing builders hardware in same/other position making smooth functioning (proper closing, opening) etc with entire satisfaction of Engineer-incharge complete all as specified and directed

M&L for 32 x 6mm aluminium strip burried in ground/fixed on wall ,roofwith saddles and fixing screws etc., for roof conductors and down conductors above ground including taking down existing unserviceable/worn out complete all as specified and as directed

M&L for Air termination,single pointed Al rod 12mm dia and 300mm long including taking down existing unserviceable/worn out complete all as specified and as directed

M&L for Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm,drilled and screwed including 3nos 8mm dia 25mm long hex. Head screw including taking down existing unserviceable/worn out complete all as specified and as directed by engineer in charge.

M&L for PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation base of poles and other similar locations including demoltion of old PCC/broken PCC complete all as specified and as directed by the Engr-in-Charge.

M&L for PCC (1:3:6) type C-2 using 40mm graded stone aggregate with and including all necessary form work complete all as specified & directed.including demoltion of old PCC/broken PCC

Supply and fix PVC cable terminal boxes, outdoor type of size 155mm x210mm x92mm with MCB SP 6 to 32 Amps including all necessary fittings and connection including taking down old unserviceable one complete all as directed by Enginner-in-Charge.

Supply and fix PVC cable terminal boxes, outdoor type of size 93mm x93mm x62mm including fixing with clamp including taking down old unserviceable one complete all as directed by Enginner-in-Charge.

Taking out unserviceable street light of any type and any sizes from the site of work complete all as specified and directed.

Supply and fix LED decorative post top lantern, 35/40 Watt capacity for energy efficient conservation upto 50% and with eco friendly lighting system with all accessories and necessary connection including taking down old unserviceable one complete all as specified and as directed.

Supply and fix LED IP65 rated inverted Pyramid Tripod type, LED Bollard 10/8 Watt capacity with soft 360° light distribution with all accessories and necessary connection including taking down old unserviceable one complete all as specified and as directed.

Supply and fix Pressure die cast powder coated housing with PC diffuser efficient high output LED bollard light cylindrical shaped 9/10 watt capacity IP 65 protection including necessary connection and taking down old unserviceable one complete all as specified and as directed.

S & F LED 12 Watt IP 67 rating waterproof fountain light compact and robust design with aluminum housing, waterproof connectors with colour white/ RGB/ mono RGB with all accessories and necessary connection including taking down old unserviceable one complete all as specified and as directed.

Supply and fix LED bollard light cylindrical shaped 9/10 watt capacity Pressure die cast powder coated housing with PC diffuser. Efficient high output LED with IP65 protection including necessary connection and taking down old unserviceable one complete all as specified and as directed.

Supply and drawn into the steel tubular pole, by drilling holes just above the junction box and another holes near street light brackets including inserting PVC insulated stranded copper electric cable of size 2.5 sqmm 2 core & all necessary connetions with junction box and street light fittings, complete all as specified and as directed. Note:- Junction box and street light fittings shall be measured and paid saperately under relavent item of BOQ/ Sch 'A'.

Supply and fixing LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed.

Supply and fixing LED street light fitting 90 Watt 230 V AC outdoor type with high pressure die c

ast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed.

Supply and fixing LED street light fitting 120 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed.