BSPL-CIVIL WORKS-SVs&BTI DEPOT

Supply, fixing- NRV 25mm dia — VALVE,CHECK,DUAL PLATE; NOMINAL SIZE:25 MM; DESIGN SPEC,PRESSURE RATING:500 BAR; TYPE OF END CONNECTION:SCREWED; MATERIAL,BODY:STAINLESS STEEL 304; TYPE OF CLOSURE MEMBER:DUAL PLATE; UNI/BI-DIRECTIONAL:UNI-DIRECTIONAL; MAT,TRIM:STAINLESS STEEL 316; ADDITIONAL INFORMATION:ANTI SIPHON; ONE WAY VALVE / NON RETURN VALVE, STANDARD:IS 5312, REQUIRED TYPE OF COVER:STAINLESS STEEL, BALL SEALED, TRIM MATERIAL:STAINLESS STEEL 304. Supplying, fitting and fixing superior quality Gun metal non return valve of approved quality25mm diaDetail specifications as given in tender document. 28 Supply, fixing-HDPE water tank 11193- Each 13000 Yes THIS INCLUDES SUPPLY OF 1000 LTR SYNTAX WATER TANK ALONG WITH NECESSARY CONNECTIONS AND ACCESSORIES Providing and fixing SINTEX or equivalent approved HDPE water tank ISI : 12701 marked with PVC fittings for inlet, outlet, over flow, scour float valve, air lock release pipe, connections of required size and diameter including connections and fixing the tank on roof at all heights with all bye-works complete as per manufacturer's specification and direction of the Engineer. (Support of tank on Brick/RCC/PCC will be paid under relevent items)1000 litres capacityDetail specifications as given in tender document.

Supply, Fixing- HDPE water tan — WATER TANK; CAPACITY:500 KL Providing and fixing SINTEX or equivalent approved HDPE water tank ISI : 12701 marked with PVC fittings for inlet, outlet, over flow, scour float valve, air lock release pipe, connections of required size and diameter including connections and fixing the tank on roof at all heights with all bye-works complete as per manufacturer's specification and direction of the Engineer. (Support of tank on Brick/RCC/PCC will be paid under relevent items)500 litres capacityDetail specifications as given in tender document. 30 SAND CAST IRON/ CAST SPUN 11193- Meters 2200 995424 Yes SOIL PROVIDING AND FIXING 100 MM DIAMETER SAND CAST IRON/CAST IRON SPUN SOIL, WASTE AND VENT PIPE (IS:1729 OR 3989) INCLUDING ALL FITTINGS (PLAIN OR DOOR) E.G. BENDS, JUNCTION, COWLS, OFFSETS, ACCESS PIECES, JOINTING WITH REFINED PIG LEAD OF 25 MM DEEP LEAD JOINTS INCLUDING CUTTING CHASE OR HOLES IN WALLS AND FLOORS AND MAKING GOOD WHERE REQUIRED FOR RAIN WATER FROM THE SLAB ETC COMPLETE. Providing, laying and jointing in position sand cast iron/ cast iron spun soil, waste and vent pipe conforming to IS 1729 including all fittings like offsets, bends, tees etc. including lead caulked joints 45 mm deep and fixing them on floors or vertically against walls by M.S. brackets or clamps so as to keep the pipes away from the wall. Rate to include scaffolding, water testing after laying the pipes and painting with two coats of paint of any colour such as chocolate grey, buff etc. over a coat of primer of approved quality all complete.100mm diaDetail specifications as given in tender document. 31 SAND CAST IRON/ CAST SPUN 11193- Meters 1750 995424 Yes SOIL PROVIDING AND FIXING UPTO 75 MM DIAMETER SAND CAST IRON/CAST IRON SPUN SOIL, WASTE AND VENT PIPE (IS:1729 OR 3989) INCLUDING ALL FITTINGS (PLAIN OR DOOR) E.G. BENDS, JUNCTION, COWLS, OFFSETS, ACCESS PIECES, JOINTING WITH REFINED PIG LEAD OF 25 MM DEEP LEAD JOINTS INCLUDING CUTTING CHASE OR HOLES IN WALLS AND FLOORS AND MAKING GOOD WHERE REQUIRED. Providing, laying and jointing in position sand cast iron/ cast iron spun soil, waste and vent pipe conforming to IS 1729 including all fittings like offsets, bends, tees etc. including lead caulked joints 45 mm deep and fixing them on floors or vertically against walls by M.S. brackets or clamps so as to keep the pipes away from the wall. Rate to include scaffolding, water testing after laying the pipes and painting with two coats of paint of any colour such as chocolate grey, buff etc. over a coat of primer of approved quality all complete.75mm diaDetail specifications as given in tender document. 32 Providing, fixing-GULLY TRAP 11193- Each 3500 995462 Yes PROVIDING AND FIXING STONEWARE GULLY TRAPS WITH CAST IRON GRATING COMPLETE WITH CAST IRON 300MM X 300MM (INSIDE SIZE) HINGED FRAME AND COVER INCLUDING 300MM X 300MM (INSIDE SIZE) BRICK MASONRY CHAMBER WITH 230 MM THK. CEMENT PLASTER IN CEMENT MORTAR 1:3 ON INSIDES, 150 MM THK. 1:3:6 CONCRETE BEDDING AND CONCRETE FOR FILLING SPACE BETWEEN CHAMBER WALLS AND GULLY TRAPS, EXCAVATION, BACKFILLING ETC. COMPLETE. Providing and fixing square mouth S.W. 100x100 mm size P type gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.5 kg and frame to be not less than 2.70 kg as per standard design with common burnt clay bricks of class designation 5.0Detail specifications as given in tender document. 33 BRICK MASONRY MANHOLES 11193- Each 13500 Yes Design and fabrication of 900 mm size manhole with flange and covers, reinforcement pad complete. Nuts bolts and gaskets for completion of work shall be provided by vendor an no extra cost. Detailed drawing shall be submitted for approval. Item: Minimum ThicknessFlange: 32mm ThkCover: 14mm Thk Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with RCC top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design including excavation,backfilling and disposal of surplus earth complete as per specifications, drawings and direction of Engineer-in- Charge. Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg with common burnt clay bricks of class designation 5.0Detail specifications as given in tender document. 34 Extra for depth for manholes 11193- Running Meter 8000 Yes DETAIL SPECIFICATION AS GIVEN IN TENDER DOCUMENT Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with RCC top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design including excavation,backfilling and disposal of surplus earth complete as per specifications, drawings and direction of Engineer-in-Charge. Extra for depth for manholes Detail specifications as given in tender document. 35 GLAZED STONEWARE PIPES 11193- Running Meter 900 995424 Yes 100mm d STONEWARE PIPE PROVIDING, LAYING AND JOINTING GLAZED STONEWARE PIPES CLASS SP-1 WITH STIFF MIXTURE OF CEMENT MORTAR IN THE PROPORTION OF 1:1 (1 CEMENT:1 FINE SAND) INCLUDING TESTING OF JOINTS ETC. COMPLETE: FOR 100 MM DIA PIPE. THIS ALSO INCLUDES PROVIDING AND LAYING CEMENT CONCRETE 1:5:10 (1 CEMENT:5 COARSE SAND:10 GRADED STONE AGGREGATE 40 MM NOMINAL SIZE) ALL-ROUND S.W. PIPES INCLUDING BED CONCRETE AS PER STANDARD DESIGN FOR 100 MM SW PIPE. Providing, laying and jointing glazed stone ware pipe class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 ( 1 Cement : 1 Fine Sand) including embedding in PCC M-10, making haunches, necessary excavation, backfilling and testing of joints etc complete as per specification and upto 1.5m depth. (PCC shall be paid separately).100 mm diaDetail specifications as given in tender document. 36 GLAZED STONEWARE PIPES 11193- Running Meter 1100 995424 Yes 150mm d STONEWARE PIPE PROVIDING, LAYING AND JOINTING GLAZED STONEWARE PIPES CLASS SP-1 WITH STIFF MIXTURE OF CEMENT MORTAR IN THE PROPORTION OF 1:1 (1 CEMENT:1 FINE SAND) INCLUDING TESTING OF JOINTS ETC. COMPLETE: FOR 150 MM DIA PIPE. THIS ALSO INCLUDES PROVIDING AND LAYING CEMENT CONCRETE 1:5:10 (1 CEMENT:5 COARSE SAND:10 GRADED STONE AGGREGATE 40 MM NOMINAL SIZE) ALL-ROUND S.W. PIPES INCLUDING BED CONCRETE AS PER STANDARD DESIGN FOR 150 MM SW PIPE. Providing, laying and jointing glazed stone ware pipe class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 ( 1 Cement : 1 Fine Sand) including embedding in PCC M-10, making haunches, necessary excavation, backfilling and testing of joints etc complete as per specification and upto 1.5m depth. (PCC shall be paid separately).150 mm diaDetail specifications as given in tender document. 37 PVC FLOOR TRAP- providing 11193- Each 1000 995462 Yes and PROVIDING AND FIXING PVC FLOOR TRAP OF SELF CLEANSING DESIGN CONFORMING TO IS SPECS WITH 100 MM INLET, 75 MM OUTLET AND 150 MM CP HINGED GRATING OF 6 MM THICK WITH RIM. RATE SHALL INCLUDE MAKING ALL NECESSARY LEAK PROOF CONNECTIONS ETC. Providing and fixing PVC floor trap of self cleansing design conforming to IS specs with 100mm inlet, 75mm outlet and 150mm CP hinged heavy brass grating of 6mm thick with rim. Rate shall include making all necessary leak proof connections etc.Detail specifications as given in tender document. 38 PVC FLOOR TRAP- providing 11193- Each 1250 Yes and DETAIL SPECIFICATION AS GIVEN IN TENDER DOCUMENT Providing and fixing PVC floor trap of self cleansing design conforming to IS specs with 100mm inlet, 100mm outlet and 150mm CP hinged heavy brass grating of 6mm thick with rim. Rate shall include making all necessary leak proof connections etc.Detail specifications as given in tender document. 39 SEPTIC TANK- construction 11193- Each 140000 995434 Yes SUPPLY AND CONSTRUCTING SEPTIC TANK FOR 30 USERS (CLEAR DIMENSIONS 4M X 1.4M X 1.4M) ALL AS PER DRAWING INCLUDING EXCAVATION, BACKFILLING, MASONRY WORK, SOIL PIPE ACCESSORIES, COVER SLAB, VENT PIPE ETC ALL COMPLETE SET AS PER DRAWING/DIRECTION OF HPCL EIC. Providing and construction of septic tank in brick masonry with common burnt clay bricks of class designation 5.0 and base and top slab in RCC M30 complete in all respect as per scope of work, detailed construction drawings , technical specifications and directions of the Engineer-in-charge.TYPE-I for 20 UsersNote:Rate to include cost of all labour, tools, tackles, equipment, hire charges, supply of all materials such as minimum 43 grade cement including CI vent, CI manhole cover, SW fittings, PVC coated rungs, brick, inserts, bolts covers, aggregates / sand fill conduits finishes in excavation and backfilling using strutting, bailing and pumping out water, masonry work, plastering, plumbing, sanitation, etc. with al bye works and sundry works. Scope of construction is from inlet chamber to outlet chamber. Over all depth of chamber may very as per site condition.Detail specifications as given in tender document. 40 SOAK PIT- construction 11193- Each 55000 995456 Yes PROVIDING AND CONSTRUCTING SOAK PIT OF 2.5 M DIA X 3 M DEPTH (INTERNAL) IN BRICK MASONRY OF CLASS 75 DESIGN. INTERNAL SIZE OF SHAFT SHALL BE MINIMUM CLEAR 1M WITH MINIMUM 230THICK. WALLS IN CEMENT MORTAR 1:6 AT TOP 500MM IN HEIGHT AND IN BOTTOM 230MM WALL IN HEIGHT WITH 450 X 450 MM DRY BRICK HONEY COMB SHAFT AND SURROUNDED BY BROKEN BRICK BATS. THE OUTER WALLS OF THE SHAFT SHOULD BE 230 MM FOLLOWED BY 150 MM THICK LAYER OF 50-80 MM NOMINAL SIZE BRICK AGGREGATES THEREAFTER FOLLOWED BY 150 MM THICK LAYER.(AS PER IS 2470 PART 1 AND PART 2 AS THE CASE MAY BE)(REFER ATTACHED DRAWING) Making soak pit 2.5 m outside diameter and effective depth of 2.5m with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design with common burnt clay bricks of class designation 5.0.Detail specifications as given in tender document. 41 GATE VALVE 32mm- Providing, 11193- Each 1750 Yes fi VALVE,GATE,WEDGE TYPE, SCREWED BONNET,THREADED; DESIGN SPEC:IS 778; SERVICE:WATER; PRESSURE DESIGNATION:#150; MATERIAL,BODY:COPPER ALLOY; MAT,TRIM:IS 554; VALVE POSITION:WATER; APPLICATION:GATE VALVE; SIZE:40 MM; DESIGN, ENGINEERING. MANUFACTURING, SHOP TESTING, SUPPLY, PACKING & FORWARDING, TRANSPORTATION, DELIVERY AT STORAGE AND FROM STORAGE TO SITE OF COPPER ALLOY GATE VALVE FOR SIZES BELOW DN 50 SHALL BE AS PER IS:778-1984 (CLASS-I), SCREWED ENDS TO IS 554, SOLID WEDGE, OUTSIDE YOKE TYPE, INTEGRAL SEAT AND RISING STEM AS PER IS 6912 (FHTB 1). Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :32mm nominal bore Detail specifications as given in tender document. 42 GATE VALVE 25mm- Providing, 11193- Each 1500 Yes fi VALVE,GATE,WEDGE TYPE, SCREWED BONNET,THREADED; DESIGN SPEC:IS 778; SERVICE:WATER; PRESSURE DESIGNATION:#150; MATERIAL,BODY:COPPER ALLOY; MAT,TRIM:IS 554; VALVE POSITION:WATER; APPLICATION:GATE VALVE; SIZE:25 MM; DESIGN, ENGINEERING. MANUFACTURING, SHOP TESTING, SUPPLY, PACKING & FORWARDING, TRANSPORTATION, DELIVERY AT STORAGE AND FROM STORAGE TO SITE OF COPPER ALLOY GATE VALVE FOR SIZES BELOW DN 50 SHALL BE AS PER IS:778-1984 (CLASS-I), SCREWED ENDS TO IS 554, SOLID WEDGE, OUTSIDE YOKE TYPE, INTEGRAL SEAT AND RISING STEM AS PER IS 6912 (FHTB 1). Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :25mm nominal bore Detail specifications as given in tender document. 43 GATE VALVE 20mm- Providing, 11193- Each 1350 Yes fi VALVE,GATE,WEDGE TYPE, SCREWED BONNET,THREADED; DESIGN SPEC:IS 778; SERVICE:WATER; PRESSURE DESIGNATION:#150; MATERIAL,BODY:COPPER ALLOY; MAT,TRIM:IS 554; VALVE POSITION:WATER; APPLICATION:GATE VALVE; SIZE:20 MM; DESIGN, ENGINEERING. MANUFACTURING, SHOP TESTING, SUPPLY, PACKING & FORWARDING, TRANSPORTATION, DELIVERY AT STORAGE AND FROM STORAGE TO SITE OF COPPER ALLOY GATE VALVE FOR SIZES BELOW DN 50 SHALL BE AS PER IS:778-1984 (CLASS-I), SCREWED ENDS TO IS 554, SOLID WEDGE, OUTSIDE YOKE TYPE, INTEGRAL SEAT AND RISING STEM AS PER IS 6912 (FHTB 1). Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :20mm nominal bore Detail specifications as given in tender document. 44 GRANULAR SUB BASE 11193- Cubic Meters 1750 Yes SUPPLY AND LAYING GRANULAR SUB BASE 100 TO 200 MM THICKNESS: GRANULAR SUB BASE, PROVIDING, LAYING, SPREADING, AND COMPACTING GRADED STONE AGGREGATE GRANULAR SUB BASE OVER SUB GRADE, AGGREGATE GRADATION SHALL BE AS PER TABLE NO 400-1 OF GRADING 1 OF MORTH SPECIFICATIONS INCLUDING TRANSPORTATION OF MATERIAL TO SITE, LAYING IN UNIFORM LAYERS WITH WELL-PREPARED SURFACE AND COMPACTING WITH VIBRATORY ROLLER TO ACHIEVE THE DESIRED DENSITY AS PER SPECIFICATIONS COMPLETE IN ALL RESPECT. SAME SHALL BE LAID IN LAYERS OF 150 MM THICKNESS EACH. RATE TO INCLUDE PREPARATION OF EXISTING SUB GRADE SURFACE TO THE PROPER LINE AND LEVEL AND COMPACTED AS DIRECTED BY ENGINEER IN CHARGE. AGGREGATE SIZE: 75 MM AND DOWN CONFIRMING TO GRADING 1 OF MORTH SPECIFICATION (TABLE 400-1). THICKNESS: FROM 100MM TO 200MM AS PER SITE REQUIREMENT.NOTE -1:IS SIEVE DESIGNATION: % PASSING75.0 MM: 10053.0 MM: 80-10026.5 MM: 55-909.50 MM: 35-654.75 MM: 25-552.36 MM: 20-400.425 MM: 10-250.075 MM: 3-10. Providing, laying, spreading, and compacting graded stone aggregeate Granular Sub Base over subgrade, aggregate gradation shall be as per Table No 400 - 1 of Grading 1 of MORTH specifications (See Note 1) including transportation of material to site , laying in uniform layers with well prepared surface and compacting with vibratory roller to achieve the desired density as per specifications complete in all respect. Same shall be laid in layers of 200 mm thickness each. Rate to include preparation of existing subgrade surface to the proper line and level and compacted as directed by Engineer in charge.Note 1:IS Sieve Designation % Passing75.0 mm 10053.0 mm 80-10026.5 mm 55- 909.50 mm 35-654.75 mm 25-552.36 mm 20-400.85 mm -----0.425 mm 10-150.075 mm <5Detail specifications as given in tender document. 45 WET MIX MACADAM 11193- Cubic Meters 2000 Yes SUPPLY AND LAYING OF WMM 100 TO 200 MM THICKNESS: WET MIX MACADAM, PROVIDING, LAYING, SPREADING, AND COMPACTING GRADED STONE AGGREGATE TO WET MIX MACADAM SPECIFICATIONS AS PER TABLE NO 400-11 OF MORTH SPECIFICATIONS INCLUDING THE PREMIXING THE MATERIAL WITH WATER AT OMC IN MECHANICAL MIX PLANT, CARRIAGE OF MIXED MATERIAL BY TIPPER TO SITE, LAYING IN UNIFORM LAYERS WITH PAVER/GRADER/MANUAL IN SUB- BASE/BASE COURSE ON WELL PREPARED SURFACE AND COMPACTING WITH VIBRATORY ROLLER TO ACHIEVE THE DESIRED DENSITY AS PER SPECIFICATIONS COMPLETE IN ALL RESPECT. SAME SHALL BE LAID IN LAYER OF 100/125 MM THICKNESS OVER GSB LAYER. AGGREGATE SIZE: 63 MM AND DOWN CONFIRMING TO GRADING 1, TYPE B OF MORTH SPECIFICATION (TABLE 400-11) THICKNESS: FROM 100MM TO 200 MM AS PER SITE REQUIREMENT.NOTE-1:IS SIEVE DESIGNATION: % PASSING53.0 MM: 10045.0 MM: 95-10026.5 MM:--22.40 MM: 60-8011.20 MM: 40-604.75 MM: 25- 402.36 MM: 15-300.06 MM: 8-220.075 MM: 0-8. Providing, laying, spreading, and compacting graded stone aggregate to wet mix macadam specifications as per Table no 400 - 13 of MORTH specifications (See Note 1) including the premixing the material with water at OMC in mechanical mix plant,carriage of mixed material by tipper to site, laying in uniform layers with paver/grader/manual in sub- base/base course on well prepared surface and compacting with vibratory roller to achieve the desired density as per specifications complete in all respect. Same shall be laid in layers of 100/150mm thickness over GSB Layer.Note 1:IS Sieve Designation % Passing53.0 mm 10045.0 mm 95-10026.5 mm ---22.40 mm 60-8011.20 mm 40-604.75 mm 25-402.36 mm 15-30600 micron 8-2275 micron 0-5Detail specifications as given in tender document. 46 DENSE BITUMIEAUS 11193- Square Meters 675 Yes MACADAM PROVIDING AND LAYING 75 MM THICKNESS (AVERAGE COMPACTED THICKNESS) BITUMINOUS MACADAM(AS PER MORTH SECTION-500) PRODUCED WITH BATCH TYPE HMP USING CRUSHED AGGREGATE AS PER GRADING-2 OF TABLE NO 500-10 OF MORTH SPECIFICATION, PREMIXED WITH BITUMINOUS BINDER GRADE VG-30 AT 5 % BY MASS OF TOTAL MIX AND LIME FILLER 2% (PERCENTAGE BY WEIGHT OF AGGREGATE), TRANSPORTED TO SITE, LAID OVER A PREVIOUSLY PREPARED SURFACE WITH PAVER FINISHER TO THE REQUIRED LEVEL, GRADE AND ALIGNMENT AND ROLLING WITH SMOOTH WHEELED, VIBRATORY AND TANDEM ROLLER TO ACHIEVE THE DESIRED COMPACTION COMPLETE IN ALL RESPECT AS PER SPECIFICATION AND AS DIRECTED BY ENGINEER IN CHARGE. RATE INCLUDE PREPARATION OF WMM SURFACE, CLEANING, PROVIDING AND APPLYING OF PRIME COAT OF BITUMINOUS MATERIAL AT 6 TO9 KG/10 SQM AS PER MORTH SPECIFICATION. CONTRACTOR TO SUPPLY BITUMEN REQUIRED FOR THIS WORK, BUT THE SAME HAS TO BE PURCHASED FROM HPCL ONLY. 1.AGGREGATE MORTH SPECIFICATION LAB TEST REPORT. 2. BITUMEN PURCHASE INVOICE AND LAB TEST REPORT. 3. PRIMER COAT IS INCLUSIVE IN THE ITEM, SHALL BE APPLIED AS PER SPECIFICATION AND DIRECTION OF EIC. 4. FINAL MIX SAMPLE TO BE TESTED IN LAB. 5. NEGATIVE THICKNESS WILL NOT BE ACCEPTABLE. THE FINAL FINISH SURFACE LEVELING IS IN SCOPE OF BIDDER. IF THE WMM SURFACE IS NOT LEVELED THE SURFACE SHALL BE LEVELED IN BM LAYER. 6. FOR ROAD CURVE TO BE MAINTAINED AS PER RULE. Providing and laying Dense Graded Bituminous Macadam using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equiped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, complete as per specificatons and directions of Engineer-in-Charge.75 mm average compacted thickness with bitumen of grade VG-30 @5% (percentage by weight of total mix) and lime filler @ 2% (percentage by weight of Aggregate) prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity.Detail specifications as given in tender document. 47 BITUMINOUS CONCRETE 11193- Square Meters 375 Yes PROVIDING AND LAYING BITUMINOUS CONCRETE 25 MM THICKNESS (AVERAGE COMPACTED THICKNESS) OVER PREVIOUSLY LAID BITUMINOUS MACADAM SURFACE(AS PER MORTH SECTION-500), HOT MIX PRODUCED WITH BATCH TYPE HMP (HOT MIX PLANT), USING CRUSHED AGGREGATE PROPERTIES AS PER GRADING-2 OF TABLE 500-17 OF MORTH SPECIFICATION, PREMIXED WITH BITUMINOUS BINDER (GRADE VG-30) AT 5 TO 6 PERCENT BY MASS OF TOTAL MIX AND 3% CEMENT AS FILLER, TRANSPORTING THE HOT MIX TO WORK SITE, LAYING WITH A HYDROSTATIC PAVER FINISHER TO THE REQUIRED GRADE, LEVEL AND ALIGNMENT, ROLLING WITH SMOOTH WHEELED, VIBRATORY AND TANDEM ROLLER TO ACHIEVE THE DESIRED COMPACTION AS PER SPECIFICATION. RATE INCLUDE CLEANING OF EXISTING OF BM SURFACE BY USING BROOM AND WIRE BRUSH, PROVIDING AND APPLYING OF TACK COAT OF HOT BITUMEN AT 2.5 TO 4 KG /10SQM AS PER SPECIFICATION ETC. ALL COMPLETE IN ALL RESPECT AS DIRECTED BY ENGINEER-IN-CHARGE. CONTRACTOR TO SUPPLY BITUMEN REQUIRED FOR THIS WORK, BUT THE SAME HAS TO BE PURCHASED FROM HPCL ONLY. 1.AGGREGATE MORTH SPECIFICATION LAB TEST REPORT. 2. BITUMEN PURCHASE INVOICE AND LAB TEST REPORT. 3. PRIMER COAT IS INCLUSIVE IN THE ITEM, SHALL BE APPLIED AS PER SPECIFICATION AND DIRECTION OF EIC. 4. FINAL MIX SAMPLE TO BE TESTED IN LAB. 5. NEGATIVE THICKNESS WILL NOT BE ACCEPTABLE. THE FINAL FINISH SURFACE LEVELING IS IN SCOPE OF BIDDER. ALL SLOPE SHALL BE MAINTAINED AS SPECIFIED BY EIC. 2.5 cm premix carpet surfacing with 2.25 cum and 1.12 cum of stone chippings of 13.2 mm and 11.2 mm size respectively per 100 sqm and 52 kg and 56 kg of hot bitumen per cum of stone chippings of 13.2 mm and 11.2 mm size respectively, including a tack coat with hot straight run bitumen, including consolidation with road roller of 6 to 9 tonne capacity etc. complete.With paving Asphalt grade VG - 30 with no solventDetail specifications as given in tender document. 48 RCC IN PAVING/GRADE SLAB 11193- Cubic Meters 7800 Yes WITH M30 (WITH MIN CEMENT CONSUMPTION AS 400 KG/CUBIC METER) FOR PAVEMENT: PROVIDING AND LAYING IN POSITION MACHINE BATCHED AND MACHINE MIXED DESIGN MIX/READY MIXED M-30 GRADE CONCRETE AS STATED FOR ABOVE ITEMS BUT FOR SLABS, PAVEMENT, DRIVEWAYS WORKS ETC AT ALL DEPTH AND HEIGHT USING 20 MM DOWN SIZE GRADED AGGREGATE IN PANELS OF 4.0 M X 4.0 M OR AS PER APPROVED DRAWING BY USING VACUUM DE WATERING METHOD (APPROVED MAKE FLOORING OR EQUIVALENT) USING CEMENT CONTENT AS PER APPROVED DESIGN MIX MANUFACTURED IN FULLY AUTOMATIC BATCHING PLANT AND TRANSPORTED TO SITE OF WORK IN TRANSIT MIXER FOR ALL LEAD HAVING CONTINUOUS AGITATED MIXER AND PROVIDING NECESSARY FORMWORK WITH MILD STEEL CHANNEL SECTIONS, CURING, EDGE TREATMENT, MAKING NECESSARY SLOPE, VIBRATING WITH NEEDLE AND SURFACE VIBRATORS AND FINISHING WITH BROOM FINISH INCLUDING COST OF CENTERING AND SHUTTERING, ADMIXTURES IN RECOMMENDED PROPORTIONS AS PER IS: 9103 TO ACCELERATE/RETARD SETTING OF CONCRETE (IMPROVE WORK ABILITY WITHOUT IMPAIRING STRENGTH AND DURABILITY) BUT EXCLUDING COST OF REINFORCEMENT ALL COMPLETE IN ALL RESPECT AND AS PER DIRECTION OF ENGINEER-IN-CHARGE. COST OF PROVIDING AND LAYING 12 MM WIDE 25 MM DEEP POLY SULPHIDE SEALANT IN CONTRACTION JOINT IN RCC FLOOR INCLUDING GROOVE CUTTING IS INCLUDED WITHIN THIS SOR ITEM. MECHANICAL MIXERS WITH HOPPER ALONG WITH WEIGH BATCHER SHALL ALSO BE PERMITTED FOR USE AT SITE WITH THE APPROVAL OF ENGINEER-IN-CHARGE TO PRODUCE DESIGN MIX CONCRETE. Providing and Laying in position machine batched and machine mixed Design mix / Ready mixed M-30 grade concrete for slab/paving work at all depths and heights using 20 mm down size graded aggregate in panels of 4.0m x 4.0 m or as per approved drawing by using vacuum dewatering method (tremix flooring or equivalent) using cement content as per approved design mix manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads having continuous agitated mixer and providing necessary formwork with MS Channel sections, curing, edge treatment, making necessary slope, vibrating with needle and surface vibrators and finishing with broom finish including cost of centering & shuttering, admixtures in recommended proportions as per IS: 9103 to accelerate/retard setting of concrete (improve workability without impairing strength and durability) but excluding cost of reinforcement all complete in all respects and as per direction of Engineer-in-Charge. Cost of providing and laying 12 mm wide 25 mm deep polysulphide sealant in contraction joint in RCC floor including groove cutting is included within this SOR Item. Mechanical mixers with Hopper along with Weigh Batcher shall also be permitted for use at site with the approval Of Engineer-in-Charge to produce Design Mix Concrete.Note:1. Rate to include cost of all labour, tools, tackles, equipment, hire charges, supply of all materials such as minimum 43 grade OPC cement/PPC cement, coarse and fine aggregates, admixtures, other minor construction materials, testing of concrete, curing etc. with all bye works and sundry works complete.2. Reinforcement & Expansion Joints shall be paid separately vide respective item.Detail specifications as given in tender document. 49 ROAD MARKINGS 11193- Running Meter 450 995473 Yes PROVIDING AND APPLYING 100MM WIDE THERMOPLASTIC ROAD MARKING PAINT AT 5 KG/SQM AT REQUISITE THICKNESS (2.5 MM APPROX.) OF APPROVED MAKE CONFORMING TO MORTH STANDARDS AND OTHER RELEVANT STANDARDS. SURFACE PREPARATION TO BE DONE BEFORE APPLICATION. Providing & applying 100mm wide thermoplastic road marking paint @ 5kg/sqm at requisite thickness (2.5 mm approx.) of approved make conforming to MORTH standards & other relevant standards. Surface preparation to be done before application.Detail specifications as given in tender document. 50 PLASTERING FOR DRAINS 11193- Square Meters 325 Yes SUPPLY AND LAYING OF PLASTER-15 MM THICK CM 1:4: PROVIDING 15 MM THICK EXTERNAL SPONGE FINISH CEMENT PLASTER WITH WATERPROOFING COMPOUND 1:4 (1 CEMENT:4 SAND) AND NECESSARY SCAFFOLDING, CURING, MAKING GROOVES, PATTA ETC. COMPLETE IN ALL LEVELS, AT ALL DEPTHS AND HEIGHTS IN TWO COATS OF 12MM & 8MM. 2ND COATING 8MM SHALL BE FINISHED WITH SAND FACED PLASTERING ON FACES OF WALLS, PILLARS, PROJECTION, BANDS, CORNICES, FINS, SILLS, ETC. INCLUDING RAKING OUT JOINTS IF ANY LEFT OUT, NECESSARY DABBING, CURING, SCAFFOLDING, PROVIDING CHICKEN MESH AT JUNCTIONS OF COLUMNS, BEAMS, PITS, CHAMBERS ETC. COMPLETE AT ALL HEIGHTS AS PER SPECIFICATION. RATE TO INCLUDE COST OF ALL LABOR, TOOLS, TACKLES, EQUIPMENT, HIRE CHARGES, SUPPLY OF ALL MATERIALS SUCH AS MINIMUM 43 GRADE CEMENT (OPC/PPC), COARSE SAND AND OTHER MINOR CONSTRUCTION MATERIALS AS PER REQUIREMENT WITH ALL BYE-WORKS AND SUNDRY WORKS COMPLETE AS PER DRAWINGS. JOB INCLUDES PROVIDING AND FIXING OF GI CHICKEN WIRE MESH ON DYKE WALL SURFACES AS DIRECTED INCLUDING FIXING WITH NAILS ETC. PRIOR TO PLASTERING (24 G, 12MM SIZE GALVANIZED CHICKEN WIRE MESH).NO ADDITIONAL PAYMENT SHALL BE MADE AGAINST CHICKEN WIRE MESH. JOB ALSO INCLUDES PROVIDING 12MM TO 15MM GROOVES IN PLASTER, MAKING CORRECTIONS IN EDGES OF GROOVES ETC. THE JOB TO BE EXECUTED AS PER ATTACHED TECHNICAL SPECIFICATIONS, JOB PROCEDURES ETC. COMPLETE AND AS DIRECTED BY EIC. Providing and applying 15 mm thick cement plaster 1 : 4 (1 cement : 4 medium coarse sand) smooth finish at all depths & heights on faces of walls, pillars, projection, bands, etc., including raking out joints if any left out, necessary dabbing, curing, scaffolding complete at all heights as per specification and drawings.Note:Rate to include cost of all labour, tools, tackles, equipment, hire charges, supply of all materials such as minimum 43 grade cement (OPC)/PPC cement, coarse sand and other minor construction materials as per requirement with all bye-works and sundry works complete as per drawings.Detail specifications as given in tender document. 51 PAVER BLOCK FLOORING 11193- Square Meters 1000 995421 Yes 80 MM THICK INTERLOCKING PAVER BLOCK: SUPPLY AND INSTALLATION OF 80 MM THICK APPROVED COLOUR/PLAIN NON GLAZED INTERLOCKING PAVER BLOCKS ALONG PIPELINE CORRIDOR IN MUMBAI PUNE SECTION OF MPSPL. CRUSHING STRENGTH OF PAVEL BLOCK SHOULD BE 300 KG/SQ.CM. MINIMUM JOB INCLUDES GRADING AND COMPACTION OF BASE IN REQUIRED SLOPE/CAMBER, PREPARATION OF SAND/CRUSHED STONE BED OF AVER. 50 MM COMPACTED THICKNESS, SUPPLY OF ALL MATERIALS, CONSUMABLES, WATER, POWER, COMPACTION, FILLING AND FLUSHING THE JOINTS WITH DRY FINE SAND, TOOLS, TACKLES, EQUIPMENT, MACHINERY, MANPOWER, SUPERVISION. DETAIL OF JOB AS PER SOQ ITEM DETAIL AND TENDER SPECIFICATION. Supplying and laying of Cement Concrete coloured inter locking paver block 60 mm thick with glossy finish , I shape or any other approved shape, M- 30 strength of approved brand laid over the sand . The CC interlocking blocks to be of uniform Grey colour or as approved by EIC complete in all respects as per scope of work, detailed construction drawings, technical specifications and directions of the Engineer-in-charge. Note:1. Rate to include cost of all labour, tools, tackles, equipment, hire charges, supply of all materials such paver blocks with all bye works and sundry works. 2. Payment for PCC 1:3:6 , Sand shall be made vide respective Item.Detail specifications as given in tender document. 52 KERB STONE 11193- Meters 1150 995442 Yes PROVIDING AND FIXING AT OR NEAR GROUND LEVEL SMOOTH FINISHED PRE-CAST, CEMENT CONCRETE BLOCKS IN KERBS, EDGING ETC. OF SIZE 300 MM X 150 MM X 300 MM. THE BLOCK MAY BE PRECAST AT SITE OR ANY OTHER APPROVED PLACE IN PCC 1:1.5:3 USING STEEL MOULD IN APPROVED Providing and laying at or near ground level factory made kerb stone 125mm thk and 300mm deep of M-30 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 fine sand) including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm) embeded in PCC M10, including making drainage opening wherever required complete, painting etc. as per direction of Engineer-in charge. Length of finished kerb edging shall be measured for payment. (Precast C.C. kerb stone shall be approved by Engineer-in-charge).Note:1. Rate to include cost of all labour, tools, tackles, equipment, hire charges, supply of all materials,earth work in excavation in cutting earth in all conditions, shuttering with all bye works and sundry works. 2. Payment for PCC M-10 shall be made vide respective PCC Item.Detail specifications as given in tender document. 53 DRY STONE PITCHING 11193- Square Meters 800 Yes DRY STONE PITCHING: PROVIDING, STACKING AND LAYING OF DRY STONE PITCHING OF MINIMUM THICKNESS 230 MM LAID IN COURSES OVER SAND BED AND REQUIRED PROFILE WITH HAMMER DRESSED STONE HAVING NO SIDE LESS THAN 150 MM WITH MINIMUM DEPTH OF 200 MM, FINISHING THE JOINTS WITH CEMENT MORTAR 1:3 RAISED POINTING INCLUDING PREPARING THE BEDDING SURFACE, RATE TO INCLUDE COST OF LABOUR, MATERIAL, EQUIPMENT, CURING ETC. ALL COMPETE AS PER SPECIFICATIONS, APPROVED DRAWING AND AS DIRECTED BY ENGINEER-IN- CHARGE. Providing, stacking & laying of dry stone pitching of average thickness 230 mm laid in courses & required profile with hammer dressed stones having no side less than 150 mm with minimum depth of 200 mm, finishing the joints with cement mortar 1:3 raised pointing including preparing the bedding surface. Rate to include cost of labour, materials, equipments etc. all compete as per specifications, approved drawings and as directed by Engineer-In- Charge.Detail specifications as given in tender document. 54 RUBBLE SOLING/BOULDER 11193- Cubic Meters 2500 Yes SOLING PROVIDING AND LAYING 230 MM THICKNESS OR SPECIFIED THICKNESS DRY TRAP RUBBLE STONE (GRANITE/BASALT) SOLING AT ALL DEPTH INCLUDING HAND PACKING, FILLING THE INTERSTICES WITH CHIP, SPALL AND BINDING WITH GRIT AND SELECTED MURRUM, WATERING, COMPACTION BY HAND RAMMING AND ROLLING WITH 1 MT HAND ROLLER ETC. COMPLETE AS PER ATTACHED JOB PROCEDURE, TECHNICAL SPECIFICATION AND AS PER DIRECTION OF EIC. Providing and laying 115 to 150 mm thickness dry trap rubble stone (granite/basalt) soling at all depths including hand packing, filling the interstices with chips, spalls and binding with grit and selected murrum, watering, compaction by hand ramming & rolling with 1 MT hand roller etc. complete as per attached job procedures, technical specification and as per direction of EIC.Detail specifications as given in tender document. 55 STONE AGGREGATE 11193- Cubic Meters 2500 Yes DETAIL SPECIFICATION AS GIVEN IN TENDER DOCUMENT Supplying, stacking and spreading of stone aggregate of size 53 mm to 22.4 mm at desired locations inside the plot over well compacted earth complete as per construction drawing and as directed by Engineer-in-charge.Detail specifications as given in tender document. 56 Expansion joint 11193- Running Meter 400 Yes DETAIL SPECIFICATION AS GIVEN IN TENDER DOCUMENT Providing and filling expansion joints in boundary walll with 25mm thick bitumen impregnated fibre board conforming to IS 1838 including cost of primer all complete.Note- Read this item along with tender drawing no MEC/Q7QP/05/11/TD/010.Detail specifications as given in tender document. 57 BITUMIEAUS Sealant joint fille 11193- Running Meter 350 Yes DETAIL SPECIFICATION AS GIVEN IN TENDER DOCUMENT Providing and filling 12mm deep groove on top and on both sides of vertical surafce with bitumenous sealant all complete.Note- Read this item along with tender drawing no MEC/Q7QP/05/11/TD/010.Detail specifications as given in tender document. 58 CONCERTINA COIL 11193- Running Meter 550 995477 Yes PROVIDING AND FIXING 610 MM DIAMETER GALVANIZED CONCERTINA RAZOR WIRE WITH MEDIUM BLADE PROFILE CONCERTINA COIL FENCING WITH ALL REQUIRED CLIPS, PINS, ETC. AS PER SPECIFICATIONS. EACH CONCERTINA COIL SHALL BE FIXED TO MS ANGLES WITH THREE ROWS OF SAME CONCERTINA RUNNER WIRES OVER Y SUPPORTS. RATE SHALL BE QUOTED PER METER OF COMPOUND WALL BASIS. TAPE: GALVANIZED COIL; THICKNESS: 0.50MM +/-0.03MM.ZINC COATING: MIN. 120 GSM. CORE WIRE: CENTRAL CORE HOT DIP GALVANIZED HIGH STENCILED WIRE 2.5MM (+/- 0.03MM) WITH TENSILE STRENGTH OF 135 TO 155 KG / SQ.MM .ZINC COATING: MIN. 200 GSM. BARB PROFILE: LENGTH 22MM +/- 2MM;DISTANCE BETWEEN BARBS: 35MM +/-2MM;80 LOOPS IN EACH 8M LENGTH. NUMBER OF GALVANIZED CLIPS : 200 CLIPS; THICKNESS: 1.5MM;TOTAL WT:13.25 KG/M Providing and fixing Concertina Coil fencing with Punched tape concertina coil 600mm dia 10 metre openable length (total length 90 m), having 50 nos. rounds per 6 m length, upto 3 m height of wall with existing angle iron Y- shaped placed 3 m apart and with 9 horizontal RBT reinforced barbed wire, stud tied with GI staples and GI clips to retain horizontal, including necessary bolts or GI barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(RBT)/spring core(2.5mm thick) wire of high tensile strength of 165 kg/sq.mm with tape(0.52mm thick) and weight 43.478gm/metre(cost of MS angle, CC blocks shall be paid separately)Note- Read this item along with tender drawing no MEC/Q7QP/05/11/TD/010.Detail specifications as given in tender document. 59 Supply, fix- Steel Y angle 11193- Each 800 Yes DETAIL SPECIFICATION AS GIVEN IN TENDER DOCUMENT Supplying, Fabricating, Fixing at all levels and positions Steel Y angle embedments/ Inserts in boundary wall column with CC blocks including two coats of approved quality Synthetic enamel paint over a primer coat on the exposed Surfaces wherever necessary, complete as per Drawings, Specifications and directions of the Engineer-in-charge. Note- Read this item along with tender drawing no MEC/Q7QP/05/11/TD/010.Detail specifications as given in tender document. 60 RCC EAN PRESSURE PIPE 11193- Running Meter 1500 Yes NP3 150m SUPPLY AND LAYING OF HUME PIPE 150 MM/NP3 CLASS: NP3 HUME PIPE 150 MM DIAMETER: PROVIDING, LAYING AND JOINING RCC NON PRESSURE PIPE OF NP3 CLASS OF FOLLOWING DIAMETER INCLUDING COLLAR JOINTED WITH STIFF MIXTURE OF CEMENT MORTAR 1:2 (1 CEMENT: 2, FINE SAND), CURING, ALIGNING, JOINING AND TESTING ETC. TO CORRECT SLOPE INCLUDING EXCAVATION, BACKFILLING AT ALL DEPTH AS PER DRAWING WITH ALL BYE WORK COMPLETE AS PER SPECIFICATION AND DIRECTION OF ENGINEER. COST OF PCC BEDDING AND ENCASING ARE NOT INCLUDED IN THE SCOPE OF THIS ITEM AND SHALL BE MEASURED AND PAID SEPARATELY. Providing,laying and joining RCC non pressure pipes of NP3 class of following diameter including collars jointed with stiff mixture of cement mortar 1:2 (1 cement : 2 fine sand), curing, aligning, joining and testing etc. to correct slope including excavation, backfilling at all depths as per drawings with all bye works complete as per specification and directions of Engineer. Cost of PCC bedding, encasing etc.are not included in the scope of this item and shall be measured and paid seperately.150 mm diameterDetail specifications as given in tender document. 61 RCC EAN PRESSURE PIPE 11193- Running Meter 2000 Yes NP3 300m SUPPLY AND LAYING OF HUME PIPE 300 MM/NP3 CLASS: NP3 HUME PIPE 150 MM DIAMETER: PROVIDING, LAYING AND JOINING RCC NON PRESSURE PIPE OF NP3 CLASS OF FOLLOWING DIAMETER INCLUDING COLLAR JOINTED WITH STIFF MIXTURE OF CEMENT MORTAR 1:2 (1 CEMENT: 2, FINE SAND), CURING, ALIGNING, JOINING AND TESTING ETC. TO CORRECT SLOPE INCLUDING EXCAVATION, BACK FILLING AT ALL DEPTH AS PER DRAWING WITH ALL BYE WORK COMPLETE AS PER SPECIFICATION AND DIRECTION OF ENGINEER. COST OF PCC BEDDING AND ENCASING ARE NOT INCLUDED IN THE SCOPE OF THIS ITEM AND SHALL BE MEASURED AND PAID SEPARATELY. Providing,laying and joining RCC non pressure pipes of NP3 class of following diameter including collars jointed with stiff mixture of cement mortar 1:2 (1 cement : 2 fine sand), curing, aligning, joining and testing etc. to correct slope including excavation, backfilling at all depths as per drawings with all bye works complete as per specification and directions of Engineer. Cost of PCC bedding, encasing etc.are not included in the scope of this item and shall be measured and paid seperately.300 mm diameterDetail specifications as given in tender document. 62 RCC EAN PRESSURE PIPE 11193- Running Meter 2500 Yes NP3 450m SUPPLY AND LAYING OF HUME PIPE 450 MM/NP3 CLASS: NP3 HUME PIPE 450 MM DIAMETER: PROVIDING, LAYING AND JOINING RCC NON PRESSURE PIPE OF NP3 CLASS OF FOLLOWING DIAMETER INCLUDING COLLAR JOINTED WITH STIFF MIXTURE OF CEMENT MORTAR 1:2 (1 CEMENT: 2, FINE SAND), CURING, ALIGNING, JOINING AND TESTING ETC. TO CORRECT SLOPE INCLUDING EXCAVATION, BACK FILLING AT ALL DEPTH AS PER DRAWING WITH ALL BYE WORK COMPLETE AS PER SPECIFICATION AND DIRECTION OF ENGINEER. COST OF PCC BEDDING AND ENCASING ARE NOT INCLUDED IN THE SCOPE OF THIS ITEM AND SHALL BE MEASURED AND PAID SEPARATELY. Providing,laying and joining RCC non pressure pipes of NP3 class of following diameter including collars jointed with stiff mixture of cement mortar 1:2 (1 cement : 2 fine sand), curing, aligning, joining and testing etc. to correct slope including excavation, backfilling at all depths as per drawings with all bye works complete as per specification and directions of Engineer. Cost of PCC bedding, encasing etc.are not included in the scope of this item and shall be measured and paid seperately.450 mm diameterDetail specifications as given in tender document. 63 RCC EAN PRESSURE PIPE 11193- Running Meter 3200 Yes NP3 600m SUPPLY AND LAYING OF HUME PIPE 600 MM/NP3 CLASS: NP3 HUME PIPE 600 MM DIAMETER: PROVIDING, LAYING AND JOINING RCC NON PRESSURE PIPE OF NP3 CLASS OF FOLLOWING DIAMETER INCLUDING COLLAR JOINTED WITH STIFF MIXTURE OF CEMENT MORTAR 1:2 (1 CEMENT: 2, FINE SAND), CURING, ALIGNING, JOINING AND TESTING ETC. TO CORRECT SLOPE INCLUDING EXCAVATION, BACK FILLING AT ALL DEPTH AS PER DRAWING WITH ALL BYE WORK COMPLETE AS PER SPECIFICATION AND DIRECTION OF ENGINEER. COST OF PCC BEDDING AND ENCASING ARE NOT INCLUDED IN THE SCOPE OF THIS ITEM AND SHALL BE MEASURED AND PAID SEPARATELY. Providing,laying and joining RCC non pressure pipes of NP3 class of following diameter including collars jointed with stiff mixture of cement mortar 1:2 (1 cement : 2 fine sand), curing, aligning, joining and testing etc. to correct slope including excavation, backfilling at all depths as per drawings with all bye works complete as per specification and directions of Engineer. Cost of PCC bedding, encasing etc.are not included in the scope of this item and shall be measured and paid seperately.600 mm diameterDetail specifications as given in tender document. 64 RCC EAN PRESSURE PIPE 11193- Running Meter 4600 Yes NP3 900m SUPPLY AND LAYING OF HUME PIPE 700 MM/NP3 CLASS: NP3 HUME PIPE 700 MM DIAMETER: PROVIDING, LAYING AND JOINING RCC NON PRESSURE PIPE OF NP3 CLASS OF FOLLOWING DIAMETER INCLUDING COLLAR JOINTED WITH STIFF MIXTURE OF CEMENT MORTAR 1:2 (1 CEMENT: 2, FINE SAND), CURING, ALIGNING, JOINING AND TESTING ETC. TO CORRECT SLOPE INCLUDING EXCAVATION, BACK FILLING AT ALL DEPTH AS PER DRAWING WITH ALL BYE WORK COMPLETE AS PER SPECIFICATION AND DIRECTION OF ENGINEER. COST OF PCC BEDDING AND ENCASING ARE NOT INCLUDED IN THE SCOPE OF THIS ITEM AND SHALL BE MEASURED AND PAID SEPARATELY. Providing,laying and joining RCC non pressure pipes of NP3 class of following diameter including collars jointed with stiff mixture of cement mortar 1:2 (1 cement : 2 fine sand), curing, aligning, joining and testing etc. to correct slope including excavation, backfilling at all depths as per drawings with all bye works complete as per specification and directions of Engineer. Cost of PCC bedding, encasing etc.are not included in the scope of this item and shall be measured and paid seperately.900 mm diameterDetail specifications as given in tender document. 65 INSERTS 11193- Metric Ton 130000 Yes SUPPLY AND FIXING OF INSERT/STRUCTURAL STEEL: STEEL WORK WELDED IN BUILT UP SECTIONS/FRAMED WORK AND EMBEDDED IN CONCRETE, INCLUDING CUTTING, HOISTING, FIXING IN POSITION AND APPLYING A PRIMING COAT OF APPROVED STEEL PRIMER USING STRUCTURAL STEEL ETC.AS REQUIRED. Supplying, Fabricating, Fixing at all levels and positions Steel embedments/ Inserts like Plates,Angle, Channels, Anchor boxes, MS pipe Sleeves including threading etc., including two coats of approved quality Synthetic enamel paint over a primer coat on the exposed Surfaces but excluding chequered plate wherever necessary, complete as per Drawings, Specifications and directions of the Engineer-in-charge. (Jigs, Templates and Fixtures will not be paid seperately).Detail specifications as given in tender document. 66 Providing and fixing chequered 11193- Metric Ton 125000 998871 Yes SUPPLYING, FABRICATING AND ERECTING IN POSITION AT ALL LEVELS AND LOCATIONS BOLTED, SCREWED AND/OR WELDED M.S. CHEQUERED PLATES OF ANY THICKNESS IN WALKWAYS, PLATFORMS, STAIR TREADS, ANY OTHER PLACE AS DIRECTED ETC. INCLUDING CUTTING TO REQUIRED SIZE, SHA Providing and fixing 8mm Thk chequered plate in approved panel or over steel structure platform,cable and pipe trench including cutting, welding, hoisting, fixing in position,including painting as per specification, complete in all respect as per drawings , technical specifications and directions of the Engineer-In-Charge. Detail specifications as given in tender document. 67 BOLTS & NUTS 11193- Kilograms 150 995468 Yes MECHANICAL INSERTS, BOLTS AND NUTS: SUPPLYING, FABRICATING, FIXING AT ALL LEVELS AND POSITIONS BOLTS WITH NUTS AND WASHERS, PIPE SLEEVES, STEEL EMBEDMENTS/INSERTS LIKE STUDS, PLATES, ANGLE, CHANNELS, ANCHOR BOXES, MILD STEEL PIPE SLEEVES INCLUDING THREADING ETC. INCLUDING TWO COATS OF APPROVED QUALITY SYNTHETIC ENAMEL PAINT OVER A PRIMER COAT ON THE EXPOSED SURFACES WHEREVER NECESSARY, COMPLETE AS PER DRAWINGS, SPECIFICATIONS AND DIRECTIONS OF THE ENGINEER-IN-CHARGE. (JIGS, TEMPLATES AND FIXTURES WILL NOT BE PAID SEPERATELY). Fixing in concrete at all levels and positions, bolts with nuts and washers, pipe sleeves etc. including painting the exposed surfaces with two coats of approved paint, providing grease to exposed area of bolts, welding wherever necessary, complete as per drawing, specifications and instruction of engineer(PCC blocks, jigs and fixtures will not be paid extra) and protecting the same till final erection.Detail specifications as given in tender document. 68 G.I.PIPES 100mm 11193- Running Meter 1500 Yes GALVANIZED IRON PIPE-100 MM NB: SUPPLYING AND LAYING OF FOLLOWING SIZE OF CLASS 'B' GALVANIZED IRON PIPE AS PER IS 1239 IN REQUIRED LENGTH FIXED ON STEEL, CONCRETE, BRICK OR SIMILAR STRUCTURE, LAID IN TRENCH, READY TO BE BURRIED IN CONCRETE INCLUDING CUTTING, BENDING, THREADING, WELDING ETC, SUPPLY OF CLAMP, SMALL IRON STRUCTURE, SPACER AND INSTALLATION OF SEAT, PLUG, BRUSHING ETC. INCLUDING ALL LABOUR AND MATERIAL COMPLETE AS PER APPROVED DRAWING AND DIRECTION OF ENGINEER-IN-CHARGE. Providing and fixing of following size of G.I. pipes (medium duty) as per IS 1239 complete with G.I. fittings and clamps including cutting by hack saw, bending by hydraulic machine, trenching and refilling etc. including all labour and material complete as per approved drawing and direction of EIC.100 mm nominal boreDetail specifications as given in tender document. 69 G.I.PIPES 150mm 11193- Running Meter 2350 Yes GALVANIZED IRON PIPE-150 MM NB: SUPPLYING AND LAYING OF FOLLOWING SIZE OF CLASS 'B' GALVANIZED IRON PIPE AS PER IS 1239 IN REQUIRED LENGTH FIXED ON STEEL, CONCRETE, BRICK OR SIMILAR STRUCTURE, LAID IN TRENCH, READY TO BE BURRIED IN CONCRETE INCLUDING CUTTING, BENDING, THREADING, WELDING ETC, SUPPLY OF CLAMP, SMALL IRON STRUCTURE, SPACER AND INSTALLATION OF SEAT, PLUG, BRUSHING ETC. INCLUDING ALL LABOUR AND MATERIAL COMPLETE AS PER APPROVED DRAWING AND DIRECTION OF ENGINEERS-IN-CHARGE. Providing and fixing of following size of G.I. pipes (medium duty) as per IS 1239 complete with G.I. fittings and clamps including cutting by hack saw, bending by hydraulic machine, trenching and refilling etc. including all labour and material complete as per approved drawing and direction of EIC.150 mm nominal boreDetail specifications as given in tender document. 70 GROUTING 11193- Cubic Meters 25000 Yes DETAIL SPECIFICATION AS GIVEN IN TENDER DOCUMENT Providing & Grouting ( including tamping ) M-30 Grade Design Mix Concrete using 12 mm down graded coarse aggregate for Structures, Foundations, Baseplates, Anchor holes etc., with Cement Concrete including Shuttering wherever necessary at all levels and as per Drawings, Specifications and direction of the Engineer.NOTE: The Weight of non-shrink cementitious grout bag Shall be of 25Kgs.Detail specifications as given in tender document. 71 Ready mix non-shrink cementiti 11193- Each 1000 Yes DETAIL SPECIFICATION AS GIVEN IN TENDER DOCUMENT Providing and laying a ready mix non-shrink cementitious grout of compressive strength of 30 N/mm2 under equipment base plate, anchor holes, etc. at all levels complete in all respects as per specifications, drawing and direction of the Engineer.NOTE: The Weight of non- shrink cementitious grout bag Shall be of 25Kgs.Detail specifications as given in tender document. 72 ANCHOR POCKETS 11193- Running Meter 800 Yes DETAIL SPECIFICATION AS GIVEN IN TENDER DOCUMENT Construction of Anchor holes or Anchor pockets in RCC works of following Cross sections including necessary shuttering and its removal, cleaning and keeping it covered till erection of bolts etc., as per specifications, drawings and direction of the Engineer.Cross section upto 400 Sq. cm.Detail specifications as given in tender document. 73 PRE CAST COVERS 11193- Cubic Meters 15000 Yes SUPPLY, INSTALLATION OF CONCRETE COVER: PROVIDING, HOISTING AND FIXING UP PRECAST REINFORCED CEMENT CONCRETE IN TRENCH, PIT, TANK AND THE LIKE INCLUDING THE COST OF REQUIRED CENTERING, SHUTTERING(WITH SMOOTH SURFACE), COMPLETE BUT EXCLUDING COST OF REINFORCEMENT WITH M-25 GRADE REINFORCED CEMENT CONCRETE(20 MM NOMINAL SIZE). Providing, hoisting and fixing up precast reinforced cement concrete of M-30 grade (20mm nominal size) in trenches, pits, tanks and the like including the cost of required centering, shuttering (with smooth surface) complete but excluding cost of reinforcement.Note :-1. The reinforcement shall be paid separately vide respective reinforcement item.Detail specifications as given in tender document. 74 NON METALLIC SURFACE 11193- Square Meters 220 995477 Yes HARDNER FLOOR HARDENER-SUPPLY AND SPREADING OF NITOFLOR HARDTOP STANDARD OF APPROVED MAKE AS PER BELOW GIVEN METHOD. (1) WATER CEMENT RATIO OF CONCRETE SHOULD BE LESS THAN 0.55 AND SLUM BETWEEN 75-100 MILLIMETRE (2)CONCRETING SHOULD BE DONE IN BAYS (3) FLOOR HARDENER TO BE APPLIED IN TWO STAGES. FLOOR HARDENER TO BE USED AT RATE OF 7.0 KG/SQ.M TO OBTAIN MAXIMUM HARDENING. (4)THE FIRST APPLICATION IS MADE USING 70% OF THE REQUIRED MATERIAL. NITOFLOR HARDTOP STANDARD IS EVENLY BROADCAST ON TO CONCRETE SURFACE. WHEN THE MATERIAL BECOMES UNIFORMLY DARK BY THE ABSORPTION OF MOISTURE FROM THE CONCRETE THIS FIRST APPLICATION CAN BE FLOATED. CARE SHOULD BE TAKEN THAT SURFACE IS NOT OVER WORKED. (5)IMMEDIATELY AFTER FLOATING, THE REMAINING NITOFLOR HARDTOP STANDARD IS SPRINKLED EVENLY OVER THE SURFACE. AGAIN MOISTURE IS ABSORBED AND THE SURFACE CAN BE FLOATED IN THE SAME WAY AS BEFORE. (6)FINAL FINISHING OF THE FLOOR USING A POWER TROVEL CAN BE CARRIED OUT WHEN THE FLOOR HAS STIFFENED SUFFICIENTLY. Finishing RCC floor with non-metallic surface hardener of approved make @ 5 Kg/Sqm, in the required size of panels, laid to proper level and slope including spreading to template, compaction with smooth & even finish and curing, including all tools and other accessories all complete as per manufacturers specification and direction of Engineer.(Rate shall be excluding the cost of RCC and reinforcement which is to be paid separately under respective item.)Detail specifications as given in tender document. 75 EXPANSION JOINTS 11193- Running Meter 400 Yes SUPPLY AND INSTALLATION OF EXPANSION JOINT-25 MM THICKNESS: PROVIDING 25 MM WIDE 200 MM DEEP EXPANSION JOINT WITH 25 THICKNESS PUF FILLER BOARD, TOP FILLED WITH 15 MM X 25 MM POLYSULPHIDE SEALANT, 32 MM DIAMETER MEDIUM GRADE PVC SLEEVE WITH END CAP AT ONE END WITH 20 MM DIAMETER PLAIN MILD STEEL BAR AT 500 MM C/C ETC ALL COMPLETE AS PER DRAWING, SPECIFICATION AND INSTRUCTION OF ENGINEER FOR PAVEMENT, DRIVEWAY ETC. Providing 25mm wide 200 deep expansion joint with 25 thick PUF filler board, top filled with 15 mm x 25 mm polysulphide sealant, 32mm dia medium grade PVC sleeve with end cap at one end with 20mm dia plain MS bar @ 500mm c/c etc all complete as per drawing, specification and instruction of Engineer.Detail specifications as given in tender document. 76 EXPANSION JOINTS 11193- Running Meter 400 Yes SUPPLY AND INSTALLATION OF EXPANSION JOINT-25 MM THICKNESS: PROVIDING 25 MM WIDE 200 MM DEEP EXPANSION JOINT WITH 25 THICKNESS PUF FILLER BOARD, TOP FILLED WITH 15 MM X 25 MM POLYSULPHIDE SEALANT, 32 MM DIAMETER MEDIUM GRADE PVC SLEEVE WITH END CAP AT ONE END WITH 20 MM DIAMETER PLAIN MILD STEEL BAR AT 500 MM C/C ETC ALL COMPLETE AS PER DRAWING, SPECIFICATION AND INSTRUCTION OF ENGINEER FOR PAVEMENT, DRIVEWAY ETC. Providing and laying 25 mm thick 150 mm deep expansion/seperation joint along the periphery of pump foundations, pedestals, flooring with approved bituminous impregnated fibre board conforming to IS 1838 including sealing the top 20mm depth with bituminous mastic sealant at all heights and locations with all bye-works complete as per drawing, standard practice as directed by engineerDetail specifications as given in tender document. 77 CONTRACTION JOINTS 11193- Running Meter 350 Yes PVC WATER BAR: PROVIDING AND LAYING OF CONSTRUCTION JOINT WITH APPROVED PVC WATER BAR INCLUDING NECESSARY PRECAUTIONARY, MEASURE COMPLETE WITH ALL BYE-WORK AS PER SPECIFICATION AND DIRECTION OF THE ENGINEER, WATER STOPS SHALL BE RIBBED TYPE, THE WATER BAR SHALL BE SUITABLE FOR LOW TEMPERATURE AND WEATHER RESISTANT AND MICROORGANISM RESISTANT, THE SHAPE OF WATER BAR SHALL BE SUITABLE FOR SHAPE OF JOINT WHERE WATER BAR ARE TO BE PROVIDED, SCOPE ALSO INCLUDE PROVIDING AND FIXING OF WATER BAR WITH REQUIRED SUPPORT, CLIP, CLAMP, STOPPER ETC. Providing 5mm wide 12mm deep groove by groove cutting machine in construction joint in RCC flooring,providing and filling with sand bitumen sealant including approved primer all complete as per drawing, specification and instruction of Engineer.Detail specifications as given in tender document. 78 DIBBLING ON EMBANKMENTS 11193- Square Meters 600 Yes SUPPLY AND LAYING GRASS TURFING/EMBANKMENT SLOPE: GRASS TURFING PROVIDING AND DIBBLING OF BERMUDA GRASS OR ANY OTHER EQUIVALENT GRASS IN EMBANKMENT SLOPES AND OTHERS AREA AS DIRECTED BY ENGINEER-IN-CHARGE BY FILLING GARDEN SOIL OF MINIMUM THICKNESS 200 MM BY MIXING MANURE AND GARDEN SOIL IN THE PROPORTIONATE OF 1:4 (MANURE: GARDEN SOIL). THE SOD OF GRASS SHEET FROM WHICH DIBBLING IS TO BE DONE SHALL BE OF WELL ROOTED GROWTH AND THICKNESS OF GRASS ON SOD SHALL BE OF 30 TO 50MM. SOD THICKNESS SHALL BE 30 TO 50 MM. RATE INCLUDING REMOVAL OF VEGETATION OR UNWANTED GRASS, BUSHES ETC. PRIOR TO START FILLING OF GARDEN SOIL, MIXING MANURE WITH GARDEN SOIL, WATERING TILL COMPLETION PERIOD, ETC. RATE TO INCLUDE SUPPLY OF GARDEN SOIL AND MANURE. Providing and dibbling of Bermuda grass or any other equivalent grass in embankment slopes and others areas as directed by Engineer-in-charge by filling garden soil of minimum thickness 200mm by mixing manure and garden soil in the proportionate of 1:4 ( Manure : Garden Soil). The sod of grass sheet from which dibbling is to be done shall be of well rooted growth and thickness of grass on sod shall be of 30 to 50mm. Sod Thickness shall be 30-50mm. Rate including removal of vegetation or unwanted grass,bushes etc.,prior to start filling of garden soil,mixing manure with garden soil,watering till completion period,etc. Rate to include supply of garden soil and manure.Detail specifications as given in tender document. 79 Polyvinyl Chloride (PVC) pipe 11193- Running Meter 450 Yes DETAIL SPECIFICATION AS GIVEN IN TENDER DOCUMENT Providing and fixing 75mm nominal bore Polyvinyl Chloride (PVC) pipes of approved make at required locations as per drawing and as per direction of Engineering In Charge.Detail specifications as given in tender document. 80 Rain Water harvesting Bore wel 11193- Running Meter 1000 Yes BORING/DRILLING BORE WELL OF 300 MM DIAMETER FOR CASING/STRAINER PIPE BY SUITABLE METHOD PRESCRIBED IN IS:2800 (PART I) INCLUDING COLLECTING SAMPLE FROM DIFFERENT STRATA, PREPARING AND SUBMITTING STRATA CHART/BORE LOG, INCLUDING HIRE AND RUNNING CHARGE OF ALL EQUIPMENT, TOOL, PLANT AND MACHINERY REQUIRED FOR THE JOB, ALL COMPLETE AS PER DIRECTION OF ENGINEER-IN-CHARGE. Boring/drilling bore well of 300 mm dia for casing/ strainer pipe by suitable method prescribed in IS: 2800 (Part I) including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in- charge.Detail specifications as given in tender document. 81 Slotted MS pipe 5.4mm thick 11193- Running Meter 1500 Yes SUPPLYING, ASSEMBLING, LOWERING AND FIXING IN VERTICAL POSITION IN BORE WELL, ERW (ELECTRIC RESISTANCE WELDED) FE 410 PLAIN SLOTTED (HAVING SLOT OF SIZE 1.6/3.2 MM) MILD STEEL THREADED AND SOCKETED/PLAIN BEVEL ENDED PIPE (TYPE A) OF 150 MM NOMINAL SIZE DIA CONFORMING TO IS:8110, OF REPUTED AND APPROVED MAKE, HAVING WALL THICKNESS NOT LESS THAN 5.40 MM, INCLUDING PAINTED WITH OUTSIDE SURFACE WITH TWO COAT OF ANTI CORROSIVE BITU MESTIC PAINT OF APPROVED BRAND AND MANUFACTURE, INCLUDING HIRE AND LABOUR CHARGE, FITTING AND ACCESSORIES, ALL COMPLETE, FOR ALL DEPTH, AS PER DIRECTION OF ENGINEER-IN-CHARGE. Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 plain slotted (having slot of size 1.6/3.2 mm) mild steel threaded and socketed / plain bevel ended pipe (type A) of 150 mm nominal size dia conforming to IS: 8110, of reputed and approved make, having wall thickness not less than 5.40 mm, including painted with outside surface with two coats of anticorrosive bitumestic paint of approved brand and manufacture, including hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer -in-charge.Detail specifications as given in tender document. 82 Casing pipe 150mm 11193- Running Meter 1450 Yes SUPPLYING, ASSEMBLING, LOWERING AND FIXING IN VERTICAL POSITION IN BORE WELL, ERW (ELECTRIC RESISTANCE WELDED) FE 410 PLAIN SLOTTED (HAVING SLOT OF SIZE 1.6/3.2 MM) MILD STEEL THREADED AND SOCKETED/PLAIN BEVEL ENDED PIPE (TYPE A) OF 150 MM NOMINAL SIZE DIA CONFORMING TO IS:8110, OF REPUTED AND APPROVED MAKE, HAVING WALL THICKNESS NOT LESS THAN 5.40 MM, INCLUDING PAINTED WITH OUTSIDE SURFACE WITH TWO COAT OF ANTI CORROSIVE BITU MESTIC PAINT OF APPROVED BRAND AND MANUFACTURE, INCLUDING HIRE AND LABOUR CHARGE, FITTING AND ACCESSORIES, ALL COMPLETE, FOR ALL DEPTH, AS PER DIRECTION OF ENGINEER-IN-CHARGE. Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel screwed and socketed/ plain ended casing pipes of 150 mm nominal size dia having minimum wall thickness 5.00 mm, conforming to IS: 4270, of reputed & approved make, including painted with outside surface with two coats of anticorrosive paint of approved brand and manufacture including required hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer-in-charge.Detail specifications as given in tender document. 83 V wire screen pipe 11193- Running Meter 1400 Yes DETAIL SPECIFICATION AS GIVEN IN TENDER DOCUMENT Supplying, assembling, lowering and fixing in vertical position in bore well, 150 mm nominal size dia V Wire screen pipe(1mm) johnson or Equivalent make, including painted with outside surface with two coats of anticorrosive paint of approved brand and manufacture including required hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer-in-charge.Detail specifications as given in tender document. 84 Gravel packing 11193- Cubic Meters 1300 995456 Yes GRAVEL PACKING IN TUBE WELL CONSTRUCTION IN ACCORDANCE WITH IS:4097, INCLUDING PROVIDING GRAVEL FINE/MEDIUM/COARSE, IN REQUIRED GRADING AND SIZES AS PER ACTUAL REQUIREMENT, ALL COMPLETE AS PER DIRECTION OF ENGINEER IN CHARGE. Gravel packing in tubewell construction in accordance with IS: 4097 including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge.Detail specifications as given in tender document. 85 Boulder stone 11193- Cubic Meters 1750 Yes SUPPLY AND LAYING OF GRAVEL 5 TO 20 MM: SUPPLYING, FILLING, SPREADING AND LEVELING STONE BOULDER OF SIZE RANGE 5 TO 20 CM, IN RECHARGE PIT, IN THE REQUIRED THICKNESS, FOR ALL LEAD AND LIFT, ALL COMPLETE AS PER DIRECTION OF ENGINEER-IN-CHARGE. Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in- charge.Detail specifications as given in tender document. 86 Gravel 5-10mm 11193- Cubic Meters 1800 995475 Yes SUPPLYING, FILLING, SPREADING AND LEVELLING GRAVELS OF SIZE RANGE 5 MILLIMETRE TO 10 MILLIMETRE, IN THE RECHARGE PIT, OVER THE EXISTING LAYER OF BOULDERS, IN REQUIRED THICKNESS, FOR ALL LEADS AND LIFTS, ALL COMPLETE AS PER DIRECTION OF ENGINEER-IN- CHARGE. Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-incharge.Detail specifications as given in tender document. 87 Coarse Sand 11193- Cubic Meters 2000 Yes SUPPLYING, FILLING, SPREADING AND LEVELING COARSE SAND OF SIZE RANGE 1.5 TO 2 MM IN RECHARGE PIT, IN REQUIRED THICKNESS OVER GRAVEL LAYER, FOR ALL LEADS AND LIFTS, ALL COMPLETE AS PER DIRECTION OF ENGINEER-IN-CHARGE. Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -in-charge.Detail specifications as given in tender document. 88 Bail plug/ Bottom plug 11193- Each 800 998739 Yes PROVIDING AND FIXING BAIL PLUG/BOTTOM PLUG OF 150 MM DIAMETER TO THE BOTTOM OF PIPE ASSEMBLY OF TUBE WELL AS PER IS:2800 (PART I). Providing and fixing Bail plug/ Bottom plug of 150mm dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I).Detail specifications as given in tender document. 89 M.S. clamp of 150mm 11193- Each 850 998739 Yes PROVIDING AND FIXING MILD STEEL CLAMP OF 150 MM DIAMETER TO THE TOP OF CASING/HOUSING PIPE OF TUBE WELL AS PER IS:2800 (PART I), INCLUDING NECESSARY BOLTS AND NUTS OF REQUIRED SIZE COMPLETE AS PER SPECIFICATION AND DIRECTION OF ENGINEER INCHARGE. Providing and fixing M.S. clamp of 150mm dia to the top of casing/housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete as per direction of Engineer-incharge.Detail specifications as given in tender document. 90 Threaded mild steel cap or sp 11193- Each 900 Yes PROVIDING AND FIXING 150 MM DIAMETER SIZE THREADED MILD STEEL CAP OR SPOT WELDED PLATE TO THE TOP OF BORE WELL HOUSING/CASING PIPE, REMOVABLE AS PER REQUIREMENT, ALL COMPLETE AS PER DIRECTION OF ENGINEER-IN-CHARGE. Providing and fixing 150mm dia size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete as per direction of Engineer-incharge.Detail specifications as given in tender document. 91 PILING UNDER FOUNDATION 11193- Meters 4500 995451 Yes BORING, PROVIDING AND INSTALLING BORED CAST-IN SITU RCC PILE OF 450 MM DIAMETER OF LENGTH 15 M BELOW THE PILE CAP IN CEMENT CONCRETE WITH M30 DESIGN MIX AS PER IS 456-2000 WITH A MINIMUM CEMENT CONTENT NOT LESS THAN 400 KG/CUM USING 20 MM AND DOWN SIZE GRADED HARD GRANITE COARSE AGGREGATES, TO CARRY A SAFE WORKING LOAD NOT LESS THAN SPECIFIED, INCLUDING CHISELING IN HARD ROCK (IF REQUIRED), EXCLUDING THE COST OF STEEL REINFORCEMENT BUT INCLUDING THE COST OF BORING WITH BENTONITE SOLUTION AND TEMPORARY CASING OF APPROPRIATE LENGTH FOR SETTING OUT REMOVAL OF SAME AND THE LENGTH OF THE PILE TO BE EMBEDDED IN THE PILE CAP ETC ALL COMPLETE, INCLUDING REMOVAL OF EXCAVATED EARTH FROM HPCL COMPOUND WALL ALL LIFTS AND LEADS. THE CEMENT CONTENT SHALL BE GOVERNED BY DESIGN MIX OR SOIL CHARACTERISTICS, WHICHEVER IS HIGHER. CEMENT SHALL BE PORTLAND POZZOLANA CEMENT CONFORMING TO IS: 1489.THE REINFORCEMENT FOR PILE SHALL BE CORROSION RESISTANT STEEL AND IT SHALL BE EITHER TISCON CRS FROM TISCO OR HSCR-M FROM VIZAG STEEL OR HCR-M FROM SAIL OR HPCL APPROVED MAKE ONLY. RATE QUOTED SHALL INCLUDE CONDUCTING ROUTINE LOAD TESTS ON WORKING PILES AS PER RELEVANT CODAL PROVISIONS AND REPLACEMENT AND RE-CASTING OF ADDITIONAL PILES IN CASE OF FAILURE IN THE LOAD TESTS. LOAD TESTS TO BE REPEATED IN CASE OF FAILURE AS ABOVE COMPLETE AS PER CODAL PROVISION AND AS DIRECTED BY EIC. THE JOB INCLUDES BORING UPTO ROCKY STRATA AND FURTHER CHISELING/ SOCKET-TING FOR 1.5 TIMES DIAMETER AND APPROVED DESIGN REQUIREMENTS OF THE PILE FOUNDATION. THE JOB IS ALSO INCLUDE COLLECTING, CONVEYING, LOADING, TRANSPORTATION OF MUCK CLAY OTHER FLUID PARTICLES ALONG WITH SOIL TO AN UNOBJECTIONABLE PLACE OUTSIDE THE PLANT PREMISES AND HPCL WILL BE RESPONSIBLE FOR ANY IRREGULARITIES BY THE PARTY REGARDING DUMPING OF THE EARTH. ALL NECESSARY CHARGES FOR RIGHT OF WAY AND DISPOSAL REQUIRED TO BE PAID TO ANY STATUTORY BODY OR PUBLIC BODY SHALL BE BORNE BY THE CONTRACTOR AND SHALL BE DEEMED TO BE INCLUDED IN QUOTED RATES. IN CASE OF ANY DEFAULT BY THE PARTY REGARDING THE ABOVE, HPCL WILL BE FORCED TO TAKE NECESSARY ACTION SUITABLY. THE PILING JOB TO INCLUDE PROVIDING CASING PIPE AS REQUIRED, BENTONITE SLURRY MIXING PLANT AND CIRCULATION PLANT, SUPPLY AND REPLENISHMENT OF BENTONITE, HIRE AND INSTALLATION CHARGES FOR ALL OTHER TOOLS, RIGS AND PLANTS AS NECESSARY. IN THIS REGARD, NO ROAD DUG UP IS PERMITTED. PARTY TO ARRANGE FOR BENTONITE SLURRY MIXING TANK. THE ITEM IS INCLUSIVE OF PLACING CONCRETE INSIDE PILE WITH STEEL AS PER SCOPE OF WORK AND STANDARD SPECIFICATION: HOWEVER STEEL IS PAID UNDER SEPARATE ITEM. Providing and fixing in position "Bored cast in situ RCC piles skin friction/end bearing type 500 mm diameter and 30 T capacity in M 30 Concrete " excluding the cost of reinforcement and getting the designs of same approved by MECON/ HPCL including driving in ground/Hard Rock at specified locations by using standard tools for construcing a rigid support base for supporting the plant building, buildings etc including all bye works, complete as per drawings, specification and directions of the Engineer-in-charge.Notes-1. Rate to include cost of all labour, tools, tackles, equipment, hire charges, supply of all materials,pile head breaking,head prepration, shuttering, providing and fixing reinforcement steel testing etc. with all bye works and sundry works and consumables.2. Reinforcement will be paid seperately in respective SOR item.Detail specifications as given in tender document. 92 Pile- Initial test 11193- Each 165000 Yes DETAIL SPECIFICATION AS GIVEN IN TENDER DOCUMENT Vertical load testing of piles in accordance with IS 2911 (Part IV) including installation of loading platform and preparation of pile head or construction of test cap and dismantling of test cap after test etc. complete as per specification & the direction of Engineer in-charge. Single pile upto 30 tonne capacity.Initial testDetail specifications as given in tender document. 93 Pile- Routine test 11193- Each 100000 Yes DETAIL SPECIFICATION AS GIVEN IN TENDER DOCUMENT Vertical load testing of piles in accordance with IS 2911 (Part IV) including installation of loading platform and preparation of pile head or construction of test cap and dismantling of test cap after test etc. complete as per specification & the direction of Engineer in-charge. Single pile upto 30 tonne capacity.Routine testDetail specifications as given in tender document. 94 DEMOLITION OF 11193- Cubic Meters 1600 Yes R.C.C./BRICKS/ST DISMANTLING OF BRICK/PCC/STONE MASONRY: DISMANTLING OF BRICK MASONRY, PLAIN CEMENT CONCRETE, STONE MASONRY: SITE CLEARANCE BY DEMOLITION OF RCC/BM/STONE MASONRY ALONG WITH REMOVING THE DEBRIS AND DISPOSAL OF UNSERVICEABLE MATERIAL OUTSIDE HPCL PREMISES UP-TO TO ANY LEAD AND STAKING OF SERVICEABLE MATERIALS, HANDING OVER SERVICEABLE MATERIAL TO CONCERNED DEPARTMENT IF REQUIRED AS PER TECHNICAL SPECIFICATIONS AND DIRECTION OF ENGINEER-IN-CHARGE. RATE INCLUDES COST OF ALL LABOR, TOOLS, TACKLES, HIRE CHARGES, ROYALTIES, LEVIES, LEADS, LOADING/UNLOADING, TRANSPORTATION, WATER, ELECTRIC POWER, ILLUMINATION ETC. COMPLETE IN ALL RESPECTS AS PER SCOPE OF WORK, DETAILED CONSTRUCTION DRAWINGS, TECHNICAL SPECIFICATIONS AND DIRECTION OF ENGINEER-IN-CHARGE. JOB ALSO INCLUDE HOT OR COLD CUTTING OF METAL/REINFORCED ROD ETC. ENCOUNTERED DURING THE DISMANTLING, STACKING AS PER IZE/THICKNESS AND STORAGE AT DESIGNATED PLACE INSIDE HPCL PREMISES AS DIRECTED BY EIC. THE JOB TO BE EXECUTED AS PER ATTACHED TECHNICAL SPECIFICATIONS, JOB PROCEDURES ETC. COMPLETE AND AS DIRECTED BY EIC. Site clearance by demolition of R.C.C./PCC/Brickwork/Stone Masonry/Stone Soling, Flexible pavements etc. along with removing the debris and disposal of unserviceable material to any lead and staking of serviceable materials, handing over serviceable material to concerned department if required as per technical specifications and direction of Engineer-in-charge.Note:1. Rate includes cost of all labour, tools, tackles, hire charges, royalties, levies, leads, loading/unloading, transportation, water, electric power, illumination etc. complete in all respects as per scope of work, detailed construction drawings, technical specifications and direction of Engineer-in-charge. 2. Demolition of RCC/PCC/Brick Masonry/Road will be paid in NET CUM as demolished.Detail specifications as given in tender document. 95 TREE CUTTING 11193- Each 3000 Yes TREE CUTTING: REMOVAL OF TREE GREATER THAN 4 INCH DIAMETER ALONG THE ROU FROM THE ROOT. Tree cutting (only of girth more than 30 cm) along with removal of roots and stumps and handing over the same to Owner / Owner's Representative including paying royalties, disposal, taking approval from competent authorities etc. all complete, as per technical specifications and direction of Engineer-in-charge.Note:1.Rate includes cost of all labour, tools, tackles, hire charges, royalties, levies,loading/unloading, transportation, electric power, illumination and cost of handingover to owner/or his representative etc. complete in all respects as per scope of workand direction of Engineer-in-charge. Detail specifications as given in tender document. 96 BORE WELL, up to 100m 11193- Each 425000 Yes BOREWELL INSTALLATION WITH SUBMERSIBLE PUMP: BORE WELL OF DEPTH 170 FEET SHALL BE MADE WITH 6 INCH HEAVY DUTY PVC PIPE WITH MULTISTAGE SUBMERSIBLE PUMP 5 HP WITH 2 INCH OUTLET. THIS PUMP SHALL SUPPLY WATER TO THE MENTIONED AREA AS AND WHEN REQUIRED. Providing and laying borewell of dia 150mm having depth of up to recommendation of hydrological survey or maximum up to 100mtr including boring, upvc casing pipe, strainer, submersible pump & starter panel (which includes MCCB, Contactor, thermal overload relay with external reset PB on font facia of the starter, start &stop push buttons, LED cluster type indication lamps (Power supply ON, Pump ON, Pump Trip etc.) of appropriate capacity along with necessary GI pipes and junction box, other necessary installations, etc. all works complete. Rate to include for cabling till nearest power point(local Junction Box)and necessary approvals from local bodies for operation of borewell. Rate to include hydrological survey for identification of borewell location for water availability. Minimum three points to be identified as per hydrological survey within the plant premises and payment shall be made for successful borewell (dig out of three) only with minimum yield of 2KL/HrNote:1. The minimum length of cabling included in this item shall be considered as = depth of borewell + 10m.Cabling length above the minimum requirement mentioned in point 1., shall be paid separately. This motor cable shall be connected to local weather proof, IP55 Junction box with canopy mountedc on MS stand locally.2. The motor shall be single phase(240V AC) for all stationsDetail specifications as given in tender document. 97 BORE WELL, above 100m 11193- Running Meter 2000 Yes DETAIL SPECIFICATION AS GIVEN IN TENDER DOCUMENT Providing and laying borewell of dia 150mm having depth of up to recommendation of hydrological survey or maximum up to 100mtr including boring, upvc casing pipe, strainer, submersible pump & starter panel (which includes MCCB, Contactor, thermal overload relay with external reset PB on font facia of the starter, start &stop push buttons, LED cluster type indication lamps (Power supply ON, Pump ON, Pump Trip etc.) of appropriate capacity along with necessary GI pipes and junction box, other necessary installations, etc. all works complete. Rate to include for cabling till nearest power point(local Junction Box)and necessary approvals from local bodies for operation of borewell. Rate to include hydrological survey for identification of borewell location for water availability. Minimum three points to be identified as per hydrological survey within the plant premises and payment shall be made for successful borewell (dig out of three) only with minimum yield of 2KL/HrNote:1. The minimum length of cabling included in this item shall be considered as = depth of borewell + 10m.Cabling length above the minimum requirement mentioned in point 1., shall be paid separately. This motor cable shall be connected to local weather proof, IP55 Junction box with canopy mountedc on MS stand locally.2. The motor shall be single phase(240V AC) for all stationsDetail specifications as given in tender document. 98 External Plaster 20mm 11193- Square Meters 425 995472 Yes PROVIDING PLAIN CEMENT INTERNAL PLASTER OF CM 1:4(1 CEMENT: 4 SAND BY VOLUME) OF 20MM THICK FOR BRICKWALLS FOR ALL LEVELS BELOW AND ABOVE GROUND LEVEL INCLUDING SIEVING OF SAND,GIVING SMOOTH AND EVEN FINISH AS PER LINE AND LEVELS, PROVIDING DOUBLE SCAFFOLDING FOR WORKING AT HEIGHTS,CURING ETC ALL COMPLETE AS PER INSTRUCTIONS OF HPCL ENGINEER.ITEM TO ALSO INCLUDE, ALL ACCESSORIES, MEN MATERIAL FOR A LIFT UPTO 5 METERS IN THE BUILDING FOR MATERIALS, PRE-APPLICATION PREPARATION CLEANING AFTER THE FINISH ETC. Providing 20 mm thick external sponge finish cement plaster with waterproofing compound 1:4 (1 cement : 4 sand) and necessary scaffolding, curing, making grooves, patta etc. complete in all levels, at all depths and heights in two coats of 12mm & 8mm. 2nd coating 8mm shall be finished with sand faced plastering on faces of walls, pillars, projection, bands, cornices, fins, sills, etc., including raking out joints if any left out, necessary dabbing, curing, scaffolding, providing chicken mesh at junctions of columns, beams etc., complete at all heights as per specificationThe job to be executed as per attached technical specifications, job procedures etc. complete and as directed by EIC.Detail specifications as given in tender document. 99 Cement Plaster 12mm 11193- Square Meters 300 995472 Yes PROVIDING PLAIN CEMENT INTERNAL PLASTER OF CM 1:4(1 CEMENT: 4 SAND BY VOLUME) OF 12MM THICK FOR BRICKWALLS FOR ALL LEVELS BELOW AND ABOVE GROUND LEVEL INCLUDING SIEVING OF SAND,GIVING SMOOTH AND EVEN FINISH AS PER LINE AND LEVELS, PROVIDING DOUBLE SCAFFOLDING FOR WORKING AT HEIGHTS,CURING ETC ALL COMPLETE AS PER INSTRUCTIONS OF HPCL ENGINEER.ITEM TO ALSO INCLUDE, ALL ACCESSORIES, MEN MATERIAL FOR A LIFT UPTO 5 METERS IN THE BUILDING FOR MATERIALS, PRE-APPLICATION PREPARATION CLEANING AFTER THE FINISH ETC. Providing 12 mm thick cement-sand plaster in cement mortar 1:4 (1 Cement : 4 coarse sand) with smooth finish at all depths and heights including surface preparation, staging, scaffolding, roughening, curing etc. complete as per specifications and drawing sand as per the direction of Engineer-in-charge.Rate to include cost of all labor, tools, tackles, equipment, hire charges, supply of all materials such as minimum 43 grade cement (OPC), coarse sand and other minor construction materials as per requirement with all bye-works and sundry works complete as per drawings.The job to be executed as per attached technical specifications, job procedures etc. complete and as directed by EIC.Detail specifications as given in tender document. 100 Cement Plaster 12mm 11193- Square Meters 325 995472 Yes PROVIDING PLAIN CEMENT INTERNAL PLASTER OF CM 1:4(1 CEMENT: 4 SAND BY VOLUME) OF 12MM THICK FOR BRICKWALLS FOR ALL LEVELS BELOW AND ABOVE GROUND LEVEL INCLUDING SIEVING OF SAND,GIVING SMOOTH AND EVEN FINISH AS PER LINE AND LEVELS, PROVIDING DOUBLE SCAFFOLDING FOR WORKING AT HEIGHTS,CURING ETC ALL COMPLETE AS PER INSTRUCTIONS OF HPCL ENGINEER.ITEM TO ALSO INCLUDE, ALL ACCESSORIES, MEN MATERIAL FOR A LIFT UPTO 5 METERS IN THE BUILDING FOR MATERIALS, PRE-APPLICATION PREPARATION CLEANING AFTER THE FINISH ETC. Providing 12mm thick cement plaster CM 1:4 (1 cement : 4 sand) to apron, drain and any other location at all heights including floating coat of neat cement @ 2.2 kg/sqm wherever required with all bye-works dabbing,curing,complete all heights and levels as per specification and drawings and as directed by engineer.Detail specifications as given in tender document. 101 Cement Plaster 6mm 11193- Square Meters 200 Yes DETAIL SPECIFICATION AS GIVEN IN TENDER DOCUMENT Providing 6 mm thick cement plaster 1:4 (1 cement : 4 sand) to ceiling of slabs, chajjas including drip course, bands, beams, columns, loft slabs, staircases, and any other location at all heights wherever required with all bye works dabbing, curing, scaffolding, including providing chicken mesh at junction of columns,beams etc.,complete at all heights and levels as per specification and drawings.Detail specifications as given in tender document. 102 Lime Paint 11193- Square Meters 175 995473 Yes WHITE WASH, SUPPLY AND APPLICATION OF TWO COATS OF LIME PAINT (1 LIME: 3 WATER) ON THE SURFACES OF WALL. THE ENTIRE PAINTING SHALL BE CARRIED OUT AS PER MANUFACTURER'S SPECIFICATIONS. COLOUR SHALL BE AS DECIDED BY HPCL. Supply & application of 1 coat of primer and 2 coats of lime paint (1 Lime: 3 Water) on surface of wall at all heights and depth including preparation of base, scaffolding complete with all bye works, specification and direction of the Engineer.Clean gum shall be dissolved in hot water and ultramarine blue of approved quality and quantity as directed by Site-in-charge, shall be added and thoroughly mixed.Total Coats = 1 Coat of Primer + 2 Coat of lime paint.One coat means painting the surface first with vertical stroke, followed by horizontal stroke. Each coat shall be allowed to dry before next one is applied. Further each coat shall be inspected and approved by the Site-in-charge before the subsequent coat is applied.The job to be executed as per attached technical specifications, job procedures etc. complete and as directed by EIC.Detail specifications as given in tender document. 103 Wall putty 11193- Square Meters 200 995475 Yes PROVIDING AND APPLYING WHITE CEMENT BASED PUTTY OF HPCL APPROVED EQUIVALENT MAKE TO PLASTERED WALL INCLUDING PREPARING THE SURFACE BY SCRAPPING, SCAFFOLDING IF REQUIRED ETC. COMPLETE AS DIRECTED BY HPCL EIC. Providing and applying wall-care Putty on plastered surfaces on internal walls for smooth and dry surface essential for painting, after removing all loosely adhering material from the wall surface. The substrate should be clean, free from dust, grease and loose materials. Dry and absorbent surfaces should be moistened with sufficient quantity of clean water. Apply the first coat on already moistened wall surface from bottom to upward direction uniformly. After drying of first coat of putty just rub the surface gently with west sponge or rub the surface very gently with the putty blade in order to remove the loose particles. Allow the surface to dry for at-least 3 hours and then apply second coat of putty. Leave the surface to dry completely. After drying of second coat remove marks if any with the help of moist sponge or rub the surface very gently with the putty blade. Leave the surface to dry preferably for overnight. The total thickness of the coats should be limited to maximum 1.5mm.Supply & application of 1 coat of primer and 2 coats of lime paint (1 Lime: 3 Water) on surface of wall at all heights and depth including preparation of base, scaffolding complete with all bye works, specification and direction of the Engineer.Clean gum shall be dissolved in hot water and ultramarine blue of approved quality and quantity as directed by Site-in-charge, shall be added and thoroughly mixed.Total Coats = 1 Coat of Primer + 2 Coat of lime paint.One coat means painting the surface first with vertical stroke, followed by horizontal stroke. Each coat shall be allowed to dry before next one is applied. Further each coat shall be inspected and approved by the Site-in-charge before the subsequent coat is applied.The job to be executed as per attached technical specifications, job procedures etc. complete and as directed by EIC.Detail specifications as given in tender document. 104 External emulsion paint 11193- Square Meters 250 995473 Yes PROVIDING AND APPLYING 2 COATS OF PREMIUM QUALITY OF ACRYLIC EMULSION PAINT EXTERIOR GRADE OF APPROVED MANUFACTURER AND SHADE ON CEILING/WALL OF LIFT SHAFT INCLUDING PROVIDING SCAFFOLDING, PREPARATION OF SURFACE ETC. COMPLETE. ALL COMPLETE AS PER DETAIL DRAWING, AS SPECIFIED AND AS DIRECTED BY ARCHITECT/CONSULTANT/PROJECT-IN-CHARGE AND MANUFACTURER&apos;&apos;S SPECIFICATIONS. APPROVED MAKE FOR PAINT AND PRIMER:ASIAN PAINT/BERGER/NEROLAC OR APPROVED EQUIVALENT Providing and applying two coats of external emulsion paint of approved shade, at all locations over and including a priming coat over wall surface, bands, parapet etc., including preparation of surface complete with all bye works complete as per specification and direction of the Engineer.Total = 1 Coat of Primer/Snowcem + 2 Coat of Emulsion PaintOne coat means painting the surface first with vertical stroke, followed by horizontal stroke. Each coat shall be allowed to dry before next one is applied. Further each coat shall be inspected and approved by the Site-in-charge before the subsequent coat is applied.The job to be executed as per attached technical specifications, job procedures etc. complete and as directed by EIC.Detail specifications as given in tender document. 105 Acrylic washable distemper 11193- Square Meters 175 995473 Yes PROVIDING AND APPLYING 2 COATS OF INTERIOR PAINT OF ACRYLIC DISTEMPER OF APPROVED MANUFACTURER OVER ONE COAT OF PRIMER, AS PER THE MANUFACTURER’S SPECIFICATIONS INCLUDING NECESSARY SCAFFOLDING, BRUSHING, CLEANING AND SURFACE PREPARATION ETC. COLOUR AS PER OWNER’S CHOICE, COMPLETE AS PER SPECIFICATIONS, DRAWINGS AND AS DIRECTED BY HPCL EIC. INTERNAL WALL FINISHProviding and applying two coats of acrylic washable distemper of approved quality and shade at all locations over and including a coat of approved primer for wall surfaces, ceilings, etc., including preparation of base, scaffolding complete with all bye works, specification and direction of the Engineer.A priming coat of whiting shall be applied over the prepared surface in case of water-bound distempering and distemper primer or cement primer shall be applied in the case of oil bound distemper.Total Coats = 1 Coat of Primer + 2 Coat of Distemper.One coat means painting the surface first with vertical stroke, followed by horizontal stroke. Each coat shall be allowed to dry before next one is applied. Further each coat shall be inspected and approved by the Site-in-charge before the subsequent coat is applied.The job to be executed as per attached technical specifications, job procedures etc. complete and as directed by EIC.Detail specifications as given in tender document. 106 ceramic tiles for dado 11193- Square Meters 1350 995474 Yes 1ST QUALITY CERAMIC GLAZED WALL TILES OF APPROVED MAKE AND WITH THICKNESS AS SPECIFIED BY THE MANUFACTURER IN ALL COLORS, SHADES EXCEPT BURGUNDY, BOTTLE GREEN, BLACK OF ANY SIZE MUST BE PROVIDED AND FIXED WITH IN SKIRTING, RISERS OF STEPS AND DADOS, OVER Providing and laying ceramic tiles for dado 600X300 mm of Group - I classification, conforming to IS:13754 of approved colour at all levels and locations with necessary specials etc. using approved first quality tiles as shown in the drawing laid over plasterboard/slab with tile fixing waterproof adhesive, joints filled with white cement/waterproofing compound mixed with matching shade of pigment etc. at all leads and lifts, complete with all byeworks as per specification and direction of Engineer Incharge.Detail specifications as given in tender document. 107 Stain & scratch resistant cera 11193- Square Meters 1700 Yes DETAIL SPECIFICATION AS GIVEN IN TENDER DOCUMENT Providing and laying Stain & scratch resistant ceramic floor tile,(600X600) in flooring, conforming to IS:13754 and of approved colour at all levels and locations using approved first quality tiles in flooring of toilets, pantry etc. and as shown in the drawing laid over slab/cement board with waterproofing & white cement mixed with matching shade of pigment etc. at all leads and lifts, complete with all byeworks as per specification and direction of Engineer InchargeDetail specifications as given in tender document. 108 Vitrified floor tile(Double C 11193- Square Meters 1800 995474 Yes PROVIDING AND LAYING OF VITRIFIED TILE FLOORING AS PER APPROVED PATTERNS WITH TILES OF SIZES 600 MM X 600 MM/OTHER APPROVED SIZE WITH AVERAGE.8 MM (+/- 1 MM) THICKNESS. AS PER APPROVED SHADE/PATTERN, OF APPROVED BRAND OF APPROVED 1 ST QUALITY SET IN CEMENT MORTAR 1:3 WITH 20 MM THICKNESS BED (ONE CEMENT AND THREE SAND) AND POINTED WITH EQUIVALENT TILE MATE (WHITE CEMENT MIXED WITH COLOURING PIGMENT USING 0.40 KG/M2) INCLUDING CUTTING FOR RACEWAYS JUNCTION BOXES CONDUITS ETC., AND NEAT FINISHING ETC. COMPLETE AS PER STANDARD SPECIFICATION. THE ITEM SHALL INCLUDE CLEANING, MAKING MOCK-UP FOR APPROVAL OF ARCHITECT/ENGINEER IN CHARGE, ALL ACCESSORIES, TOOLS, LABOUR, LIFT TILL 20 METERS AND PROTECTING FINISHED INSTALLATION WITH POP LAYER TILL HANDOVER, WITH ALL CLEANING COMPLETE ETC. NO EXTRA WILL BE PAYABLE TOWARDS WASTAGE DUE TO MATERIAL PATTERN. Providing, laying & designing seamless Vitrified floor tile(Double Charge) 1st quality of approved make,size 600X600X9(approx.. size)mm with water absorption's less than 0.08% and conforming to IS:15622 of approved quality,shade,range and pattern, using chemical tile adhesive & epoxy laid over cement board to proper level and joints pointed with tile jointing compound of approved make including waterproofing , finishing and cleaning etc. complete as directed by the EIC. The measurements shall be based on laid area of floor and no extra payment shall be paid for wastage. The rates shall include cost of laying protective PVC sheets/ POP which shall keep the floor covered at all times till handing over of the site etc. complete. The item shall include providing and laying vitified tiles 1st quality of approved make (thickness as per approved manufactures detail but not less than 7 mm) matching / same as colour of flooring in skirting , wall facing (lining) and pillers using chemical tile adhesive with epoxy of approved make, laid to proper level and joints pointed with tile jointing compound of approved make including finishing and cleaning etc. complete as directed by the EIC.Detail specifications as given in tender document. 109 vitified tiles-skirting 11193- Square Meters 1900 995474 Yes 1ST QUALITY CERAMIC GLAZED WALL TILES OF APPROVED MAKE AND WITH THICKNESS AS SPECIFIED BY THE MANUFACTURER IN ALL COLORS, SHADES EXCEPT BURGUNDY, BOTTLE GREEN, BLACK OF ANY SIZE MUST BE PROVIDED AND FIXED WITH IN SKIRTING, RISERS OF STEPS AND DADOS, OVER Supply, Providing and laying vitified tiles skirting 1st quality of approved make (thickness as per approved manufactures detail but not less than 7 mm) matching / same as colour of flooring in skirting, wall facing (lining) and pillers using chemical tile adhesive with epoxy of approved make, laid to proper level and joints pointed with tile jointing compound of approved make including finishing and cleaning etc. complete as directed by the EIC.Detail specifications as given in tender document. 110 Colored concrete paver block 11193- Square Meters 1100 995421 Yes 80 MM THICK INTERLOCKING PAVER BLOCK: SUPPLY AND INSTALLATION OF 80 MM THICK APPROVED COLOUR/PLAIN NON GLAZED INTERLOCKING PAVER BLOCKS ALONG PIPELINE CORRIDOR IN MUMBAI PUNE SECTION OF MPSPL. CRUSHING STRENGTH OF PAVEL BLOCK SHOULD BE 300 KG/SQ.CM. MINIMUM JOB INCLUDES GRADING AND COMPACTION OF BASE IN REQUIRED SLOPE/CAMBER, PREPARATION OF SAND/CRUSHED STONE BED OF AVER. 50 MM COMPACTED THICKNESS, SUPPLY OF ALL MATERIALS, CONSUMABLES, WATER, POWER, COMPACTION, FILLING AND FLUSHING THE JOINTS WITH DRY FINE SAND, TOOLS, TACKLES, EQUIPMENT, MACHINERY, MANPOWER, SUPERVISION. DETAIL OF JOB AS PER SOQ ITEM DETAIL AND TENDER SPECIFICATION. Supplying and laying of Cement Concrete colored inter locking paver block 80 mm thick with glossy finish, I shape or any other approved shape, M-30 strength of approved brand laid over the sand bed. The CC interlocking blocks to be of uniform Grey color or as approved color laid in pattern as directed by HPCL EIC complete in all respects as per scope of work, detailed construction drawings, technical specifications and directions of the Engineer-in-charge. Scope of job includes providing sand bed of min 50mm for laying of pavers.The job to be executed as per attached technical specifications, job procedures etc. complete and as directed by EIC.Detail specifications as given in tender document. 111 kota stone slab flooring 11193- Square Meters 1160 995475 Yes KOTAH STONE TREADS, RISERS, LANDING ETC. 25 MM THICK, PROVIDING AND LAYING IN FLOOR APPROVED QUALITY MACHINE CUT, MACHINE POLISHED KOTAH STONES OF SPECIFIED SIZE AND THICKNESS IN GREEN OR GREY OR APPROVED TINT IN PATTERN OR LAYOUTS AS PER DRAWING OVER A BED OF 20MM C.M.1:4 INCLUDING CURING AND POLISHING SMOOTH AS PER SPECIFICATIONS AND AS DIRECTED AND INSTRUCTED BY HPCL ENGINEER IN-CHARGE. Providing and laying kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25MM thickDetail specifications as given in tender document. 112 Kota stone slabs 11193- Square Meters 1500 Yes SUPPLY AND FIXING OF KOTA STONE 12 MM, MIRROR FINISHED: PROVIDING AND LAYING MIRROR POLISHED KOTA STONE SLABS 12 MM THICK IN RISERS OF STEPS, SKIRTING, DADO, PILLARS, EXTERNAL CLADDING LAID ON 12 MM (AVERAGE) THICK CEMENT MORTAR 1:3 (1 CEMENT: 3 COARSE SAND) AND JOINTED WITH GREY CEMENT SLURRY MIXED WITH PIGMENT TO MATCH THE SHADE OF THE SLABS, INCLUDING RUBBING AND POLISHING COMPLETE. Providing and laying mirror polished Kota stone slabs 12 mm thick in risers of steps, skirting, dado, pillars, external cladding laid on 12 mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.Detail specifications as given in tender document. 113 PCC flooring 11193- Square Meters 650 Yes DETAIL SPECIFICATION AS GIVEN IN TENDER DOCUMENT Providing and laying 52 mm thick plain cement concrete flooring consisting of under layer 40 mm thick cement concrete M-20 nominal grade using stone aggregate 20 mm nominal size) and top layer 12 mm thick with cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume. Hardening compound is to be mixed @ 2 litres per 50kg of cement or as per manufacturers specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete. Detail specifications as given in tender document. 114 Cement plaster-skirting 11193- Square Meters 420 995472 Yes PROVIDING 18 MM THICK CEMENT PLASTER SKIRTING UP TO 10 CM HEIGHT, WITH CEMENT MORTAR 1:3 (1CEMENT:3 COARSE SAND), FINISHED WITH A FLOATING COAT OF NEAT CEMENT ALL COMPLETE AS PER SPECIFICATION AND DIRECTION OF ENGINEER-IN-CHARGE. 18 mm th.Cement plaster skirting with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement.Detail specifications as given in tender document. 115 Granite stone work 11193- Square Meters 4800 995475 Yes GRANITE: PROVIDING AND FIXING 18 MM THICKNESS GANG SAW CUT MIRROR POLISHED WITH ANTI SKID TREATMENT, (PREMOULDED AND PREPOLISHED) MACHINE CUT FOR STAIRS, LANDING, RISER AND SIMILAR LOCATIONS OF REQUIRED SIZE OF APPROVED SHADE, COLOUR AND TEXTURE LAID OVER 20MM THICK BASE CEMENT MORTAR 1:4(1 CEMENT: 4 COARSE SAND) WITH JOINTS TREATED WITH WHITE CEMENT, MIXED WITH MATCHING PIGMENT, EPOXY. TOUCH UPS, INCLUDING RUBBING, CURING, MOLDING AND POLISHING TO EDGE TO GIVE HIGH GLASS FINISH ETC. COMPLETE AT ALL LEVELS. Providing and fixing 18mm thick black/ coloured granite, gang saw cut mirror polished (premoulded and prepolished) machine cut for planter, risers,kitchen platforms, vanity counters,sills , facias,columns and similar locations of required size of approved shade and texture laid over 15mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite shall be screwed over steel structure for risers Detail specifications as given in tender document. 116 Granite in urinal partition 11193- Each 2500 Yes SUPPLY AND FIXING GRANITE SLAB, 18 MM PROVIDING AND FIXING 18 MM THICK GRANITE STONE SLAB TABLE RUBBED, EDGES ROUNDED AND POLISHED OF SIZE 75X50 CM DEEP AND 1.8 CM THICK FIXED IN URINAL PARTITIONS BY CUTTING A CHASE OF APPROPRIATE WIDTH WITH CHASE CUTTER AND EMBEDDING THE STONE IN THE CHASE WITH EPOXY GROUT OR WITH CEMENT CONCRETE 1:2:4 (1 CEMENT: 2 COARSE SAND: 4 GRADED STONE AGGREGATE 6 MM NOMINAL SIZE) AS PER DIRECTION OF ENGINEER-IN-CHARGE AND FINISHED SMOOTH. THE PARTITION SHALL BE CLEANED AND POLISHED AFTER ENTIRE JOB IS COMPLETED. Providing and fixing 18 mm thick Granite stone slab table rubbed, edges rounded and polished of size 75x50 cm deep and 1.8 cm thick fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth. The partition shall be cleaned and polished after entire job is completed.Detail specifications as given in tender document. 117 False ceiling 11193- Square Meters 1800 Yes SUPPLY AND FIXING FALSE CEILING, CA SILICATE: PROVIDING AND FIXING 15 MM THICK DENSIFIED TEGULAR EDGED ECO FRIENDLY LIGHT WEIGHT CALCIUM SILICATE FALSE CEILING TILES OF APPROVED TEXTURE SPINTONE/COSMOS/HEXA OR EQUIVALENT OF SIZE 595 X 595 MM IN TRUE HORIZONTAL LEVEL, SUSPENDED ON INTER LOCKING METAL GRID OF HOT DIPPED GALVANIZED STEEL SECTIONS (GALVANIZING AT 120 GRAMS PER SQ.M INCLUDING BOTH SIDE) CONSISTING OF MAIN T RUNNER SUITABLY SPACED AT JOINTS TO GET REQUIRED LENGTH AND OF SIZE: 24 X 38 MM MADE FROM 0.33 MM THICK (MINIMUM) SHEET, SPACED 1200 MM CENTRE TO CENTRE, AND CROSS T OF SIZE: 24 X 28 MM MADE OUT OF 0.33 MM (MINIMUM) SHEET, 1200 MM LONG SPACED BETWEEN MAIN T AT 600 MM CENTRE TO CENTRE TO FORM A GRID OF 1200 X 600 MM AND SECONDARY CROSS T OF LENGTH 600 MM AND SIZE 24 X 28 MM MADE OF 0.33 MM THICK (MINIMUM) SHEET TO BE INTER LOCKED AT MIDDLE OF THE 1200 X 600 MM PANEL TO FROM GRID OF SIZE 600 X 600 MM. Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture spintone/ cosmos / Hexa or equivalent of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main T runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross T of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between mainT at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross T of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mmDetail specifications as given in tender document. 118 Gypsum board false ceiling 11193- Square Meters 1400 995453 Yes GYPSUM BOARD CEILING; PROVIDING AND FIXING SEAMLESS CEILING WITH GYPSUM BOARD OF AVERAGE 12.5 MM THICK. FIXED TO THE UNDERSIDE OF THE SUSPENDED GRID FORMED OF GI PERIMETER CHANNEL OF AVERAGE SIZE 20 X 27 X 30 MM FIXED ALONG THE WALL BY TW RAWL PLUGS AND METAL (GALVANIZED STEEL EXPANSION) ANCHOR BOLTS. THE GI INTERMEDIATE CHANNEL OF AVERAGE SIZE 45X15X0.90 MM SHALL BE FIXED TO THE SUSPENDED STRAP HANGER /GI CEILING ANGLE AT INTERVALS NOT MORE THAN 1220MM. THE SUSPENDED GI CEILING ANGLE/STRAP HANGER IS TO BE CONNECTED WITH GI SOFFIT CLEAT OF SIZE AVERAGE 37 X 27 X 25 X 1.6 MM AND IT SHOULD BE FIXED ON THE ROOF SLAB/BEAM BY USING METAL EXPANSION FASTENERS (WT.TYPE) OF 12.5MM DIA TO A LENGTH OF 35 MM WITH 6 MM DIA. BOLT/SCREW AT TOP ENDS .THE GI CEILING SECTION OF AVERAGE SIZE 80 X 26 X 0.5 MM IS TO BE PROVIDED ACROSS THE INTERMEDIATE CHANNEL AT INTERVALS NOT MORE THAN 600MM CENTRES AT BOTTOM AND THE SAME SHALL BE FIXED BY GI CONNECTION CLIPS 2.64 MM DIA AT THE INTERSECTION POINTS. THE ENDS OF CEILING SECTION CHANNEL BY ADOPTING AN OVERLAP LENGTH OF MINIMUM 150MM CONNECTED WITH INTERMEDIATE CHANNEL SHALL BE FIXED TO PERIMETER CHANNEL IN INSERTION. WORK TO INCLUDE MAKING AND FINISHING OF RECESSES FOR LIGHTING FIXTURE, PREPARING THE BOARD TO TAKE PAINT FINISH, PROVIDING CUTTING FOR TRAP DOOR OF REQUIRED SIZE FOR SERVICE ACCESS, AL. POWDER COATED HVAC GRILLS AS PER APPROVAL BY ARCHITECT CONSULTANT, NECESSARY COVES, RECESSES AS PER DESIGN DRAWING, INCLUDING CUTTING FOR ACCESS DOORS, SEALING THE JOINTS WITH AIR DRYING JOINING COMPOUND OR EQUIVALENT SEALING MATERIALS, WITH FLUSH BONDED/SCREWED SECURING OF THE HATCH USING A CLIP- LOCK MECHANISM THAT IS INTEGRATED IN THE FRAME AND CONCEALED. ITEM TO INCLUDE ALL ACCESSORIES, FITMENTS, MEN AND MATERIAL AND LIFT UP TO 5 MT. CORRECT INSTALLATION PROCEDURE, TRAP DOOR CUTTING AND NECESSARY CUTTING IN FALSE CEILING STRICTLY WITH UNIT TEMPLATE AND FINISHING, NECESSARY SCAFFOLDING, CLEANING ETC. COMPLETE. ITEM TO INCLUDE APPROVAL OF MOCK-UP BY ARCHITECT/ENGINEER INCHARGE. THE WORK HAS TO BE COMPLETED AS PER DRAWINGS AND INSTRUCTIONS BY HPCL EIC/ARCHITECT. THE FINISHED SURFACE INCLUDING THE COVE SURFACE IF ANY WILL BE MEASURED FOR PAYMENT. Providing and fixing in position 12.5 mm thick gypsum board false ceiling confirming to IS 2095 -1982 with approved G.I Frame work and hangers including openings for lights, air conditioning grills, fire detectors, nozzles, recess for hanging blinds,etc. as per specification and complete. Rate shall include vertical as well as horizontal surfaces as per design drawing and actual 'seen' surface of horizontal and vertical will be measured and paid for. Layout and design of false ceiling with cutouts & decorative mouldings etc.to be approved by PMDetail specifications as given in tender document. 119 ALUMINIUM WORK 11193- Kilograms 750 Yes SUPPLY OF FIXING OF STEEL WINDOW AND VENT: PROVIDING AND FIXING WINDOWS, VENTILATORS, WITH EXTRUDED BUILT-UP STANDARD TUBULAR/APPROPRIATE Z SECTIONS OR ANY OTHER SECTIONS OF APPROVED MAKE, CONFORMING TO IS: 733 AND IS: 1285, FIXED WITH APPROVED QUALITY RAWL PLUGS AND SCREWS OR WITH FIXING CLIPS OR WITH EXPANSION HOLD FASTENERS, INCLUDING APPLICATION OF APPROPRIATE SILICON BASED SEALANT BETWEEN THE ALUMINUM FRAME AND MASONRY/CONCRETE FROM BOTH OUTSIDE AND INSIDE TO MAKE THE FRAME WATER TIGHT. ALUMINIUM SECTIONS SHALL BE SMOOTH, RUST FREE, STRAIGHT, MITRED AND JOINTED MECHANICALLY, WHEREVER REQUIRED INCLUDING CLEAT ANGLE AND SHALL BE ANODIZED WITH MINIMUM 20 MICRON THICKNESS AS PER APPROVED COLOR (AS PER IS:1868). (MINIMUM ANODIC COATING SHALL BE OF GRADE AC15). THE WINDOWS AND VENTILATORS SHALL BE PROVIDED WITH FLY MESH. ALUMINIUM SNAP BEADING FOR GLAZING/PANELING, STAINLESS STEEL SCREWS AND ALL STANDARD ACCESSORIES, HINGES/PIVOTS FOR SHUTTER PORTION, FIXING OF STANDARD WINDOW SHUTTERS TO FRAMES AND ALSO INCLUDING FIXING OF FRAMES TO MASONRY OPENINGS WITH LUGS/SCREWS MASTIC ETC. EPDM/NEOPRENE GASKETS BETWEEN FRAMES/BEADINGS AND GLASS TO MAKE THE GLAZING WATER TIGHT ETC. COMPLETE WITH ALL BYE WORKS INCLUDING FITTING OF STAYS, PUSHPLATES, BOLTS, HANDLES, LOCK (FOR TICKET WINDOWS), 6 LEVER LOCK, 2 MM THICK RUBBER GASKETS AROUND, ETC. AS PER MANUFACTURER SPECIFICATIONS, DRAWING, DIRECTION AND TO THE SATISFACTION OF THE ARCHITECT/SITE IN CHARGE. Providing and fixing windows, ventilators,fixed glazing/partitions with extruded built-up standard tubular / appropriate Z sections or any other sections of JINDAL/ HINDALCO, conforming to IS: 733 and IS: 1285, fixed with approved quality rawl plugs and screws or with fixing clips or with expansion hold fasteners, including application of appropriate silicon based sealant between the aluminum frame and masonry/concrete from both outside and inside to make the frame water tight. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically , wherever required including cleat angle and shall be anodized with minimum 20 micron thickness as per approved colour (as per IS:1868). (Minimum anodic coating shall be of grade AC15). The windows & ventilators shall be provided with flymesh.Aluminium snap beading for glazing / paneling, stainless steel screws and all standard accessories, hinges / pivots for shutter portion, fixing of standard window shutters to frames and also including fixing of frames to masonry openings with lugs/screws mastic etc. EPDM / Neoprene gaskets between frames / beadings and glass to make the glazing water tight etc. complete with all bye works including fitting of stays, push-plates, bolts, handles, lock(for ticket windows),6 lever lock, 2mm thick rubber gaskets around, etc. as per manufacturer's specifications, drawings, direction and to the satisfaction of the Architect / Site in charge.Fixed and openable portion, fixed to frame size min. 101.6mm X 44.45mm x 2.01mm, weight 1.605 kg/m (approx.) and 63.5mm x 38.1mm x 1.5mm, weight 0.861 kg/m min. as per requirement. Sliding shutters fixed to frame size 92mm X 31.75mm x 1.5mm min. & weight 1.060 kg/m min and 61.85mm x 31.75mm x 1.5mm, wt. 0.784 kg/m min as per requirement. Shutter side, bottom and interlock shall be 40mm x 18mm x 1.55mm wt. 0547kg/m min., as per approved drawing and as per approved manufacturer's detail. Frame for grill shall be 63.5mm x 38.1mm x 2mm & wt. 1.054kg/m.Detail specifications as given in tender document. 120 Glazing in Aluminium fittings 11193- Square Meters 1000 995471 Yes PROVIDING AND FIXING GLAZING IN ALUMINIUM DOOR, WINDOW, VENTILATOR SHUTTER AND PARTITIONS ETC. WITH PVC/NEOPRENE GASKET, RUBBER BEADING ETC. COMPLETE AS PER THE DIRECTIONS OF ENGINEER-IN-CHARGE. (COST OF ALUMINIUM SNAP BEADING SHALL BE PAID IN BASIC ITEM. ) WITH LAMINATED SAFETY GLASS PANES OF 5. 76 MILLIMETRE THICKNESS. Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.50 mm thicknessDetail specifications as given in tender document. 121 Double action heavy duty floor 11193- Each 4200 995476 Yes PROVIDING AND FIXING FLOOR SPRING, HPCL APPROVED MAKE AS PER DRAWING, SPECIFICATION AND AS DIRECTED BY HPCL EIC. Providing and fixing Double action heavy duty floor spring of approved makeDetail specifications as given in tender document. 122 hydraulic door closer 11193- Each 2000 995476 Yes SUPPLY AND FIXING OF HYDRAULIC DOOR CLOSURE OF APPROVED BRAND INCLUDING HARDWARE. SLEEK MODEL Providing & fixing approved quality hydraulic door closer conforming to IS:3564 as per drawings and as directed by engineer Detail specifications as given in tender document. 123 Box for ceiling fan clamp 11193- Each 200 Yes PROVIDING AND FIXING CIRCULAR/HEXAGONAL CAST IRON OR MS SHEET BOX FOR CEILING FAN CLAMP AS REQUIRED AND AS APPROVED BY ENGINEER-IN-CHARGE, COMPLETE IN ALL RESPECT. Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp as required & as approved by Engineer-in-charge,complete in all respect Detail specifications as given in tender document. 124 Waterproofing of Roof slab 11193- Square Meters 1500 Yes SUPPLY AND LAYING OF WATERPROOF SLAB: WATERPROOFING SYSTEM FOR ROOF SLAB SURFACE PREPARATION: REMOVE ALL SURFACE LAITANCE AND CONTAMINATION FREE FROM LOOSE AGGREGATE OR OTHER SHARP PROTRUSIONS WITH FAIRLY SMOOTH FINISH BY WIRE BRUSH AND GRINDING METHOD AND SURFACE SHALL BE DRY FOR APPLICATION OF SINGLE COMPONENT PITCH MODIFIED POLYURETHANE CURES BY REACTION WITH ATMOSPHERIC MOISTURE TO GIVE A TOUGH ELASTOMERIC WATERPROOF MEMBRANE. SYSTEM:PROVIDING AND APPLYING 1.2 MM THICK ROLLER APPLIED SINGLE COMPONENT BITUMEN MODIFIED POLYURATHENE COATING, HAVING ELONGATION CAPABILITY OF 450% AS PER ASTM D412, HAVING TENSILE STRENGTH 1.5 N/MM2 AS PER ASTM D 412, TEAR RESISTANCE OF 15N AS PER ASTM D624 AND HAVING SHORE A HARDNESS 50 AS PER ASTM D2240. WATERPROOFING TREATMENT TO BE PROVIDED AFTER PROPER SURFACE PREPARATION AS PER MANUFACTURER SPECIFICATION AND MAKING OF COVING AT THE JUNCTION OF HORIZONTAL AND VERTICAL SURFACE BY POLYMER MODIFIED MORTAR AND TREATMENT OF CRACK IF ANY ON THE SURFACE BY OW VISCOUS EPOXY RESIN INJECTION. Waterproofing System for Roof Slab Surface Preparation: remove all surface laitance and contamination free from loose aggregate or other sharp protrusions with fairly smooth finish by wire brush and grinding method and surface shall be DRY for application of single component pitch modified polyurethane cures by reaction with atmospheric moisture to give a tough elastomeric waterproof membrane. System : Providing and applying 1.2 mm thick roller applied single component Bitumen Modified Polyurathene coating, having elongation capability of 450% as per ASTM D412, having Tensile strength 1.5N/mm² as per ASTM D 412, Tear Resistance of 15N as per ASTM D 624 and having shore A Hardness 50 as per ASTM D 2240. Waterproofing treatment to be provided after proper surface preparation as per manufacturer specification and making of coving at the junction of horizontal and vertical surface by Polymer Modified Mortar and treatment of crack if any on the surface by ow viscous epoxy resin injection. screed to slope : Providing and laying 50mm thick screed concrete of M20 grade mixed with approved water proofing compound like Integral waterproofing compound confirming to IS 2645) over the coated surface inculding application of 300 GSM geotextile layer over the waterproofing.Detail specifications as given in tender document. 125 uPVC rain water pipes 11193- Running Meter 350 Yes DETAIL SPECIFICATION AS GIVEN IN TENDER DOCUMENT Providing and fixing on wall face uPVC rain water pipes(110mm dia) conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion Single socketed pipes.Detail specifications as given in tender document. 126 Access Floor panel of size 600 11193- Square Meters 6000 Yes DETAIL SPECIFICATION AS GIVEN IN TENDER DOCUMENT Access Floor panel of size 600 x 600 mm of (M/S Unitile/Linder/CBI or equivalent) shall be all steel welded construction with an enclosed bottom pan of hemispherical cones and top plain sheet is fuse welded at 144 locations to form a panel. The hollow panels post manufacturing shall be pretreated on a Automated Pre treatment line and further coated with electro statically deposited epoxy raisin paint 60 - 80 micron thick on all the exposed sides of the panel. Post coating the hollow core of the panel is injected with a light weight, fire retardant, non combustible cementitious compound at high pressure to ensure support of not less than 90% of the top surface area of the panel.The panel should be having a very thin flange to make the edges more rigid to avoid damages during installation and then laminated with floor grade Antistatic Laminate on a semi -automated lamination line to ensure maximum bonding to the steel surface. The edges of the laminated panel should be protective with edge beading Detail specifications as given in tender document. 127 Crazy ceramic tile flooring 11193- Square Meters 1500 Yes CRAZY CERAMIC TILE FLOORING, WITH UNDER LAYER 12 MM THICK CEMENT MORTAR 1:4 (1 CEMENT: 4 COARSE SAND), WITH JOINTS NOT EXCEEDING 5 MM, INCLUDING FILLING THE GAPS WITH ORDINARY CEMENT MIXTURE & MIXING WITH SYNTHETIC POLYESTER FIBRE, TRIANGULAR IN SHAPE HAVING SPECIFIC GRAVITY OF 1.34 TO 1.40, CROSS SECTION SIZE RANGING FROM 10 TO 40 MICRON & LENGTH UPTO 6 MM , MIXING FIBRE @ 125 GRAMS PER 50 KG OF CEMENT IN CEMENT MORTAR, INCLUDING PROVIDING AND MIXING WATER PROOFING MATERIAL IN MORTAR @ 1 KG PER 50 KG OF CEMENT, ALL COMPLETE AS PER DIRECTION OF ENGINEER-IN-CHARGE Crazy ceramic tile flooring, with under layer 12 mm thick cement mortar 1:4 (1 cement: 4 coarse sand), with joints not exceeding 5 mm, including filling the gaps with ordinary cement mixture & mixing with synthetic polyester fibre, triangular in shape having specific gravity of 1.34 to 1.40, cross section size ranging from 10 to 40 micron & length upto 6 mm , mixing fibre @ 125 grams per 50 kg of cement in cement mortar, including providing and mixing water proofing material in mortar @ 1 kg per 50 kg of cement, all complete as per direction of Engineer-in-chargeDetail specifications as given in tender document. 128 black granite inauguration st 11193- Each 17500 Yes SUPPLYING AND FIXING MIN.18 MM THICK SMOOTH FINISH BLACK GRANITE INAUGURATION STONE OF SUPERIOR QUALITY WITH OVERALL SIZE OF 1000X750MM OR 2000X1000(AS PER REQUIREMENT OF HPCL), WITH ORNAMENTAL EDGE MOULDED GRANITE / MARBLE / CEMENT PLASTER BAND OF APPROVED SHAPE. THE PREPARED BLOCK SHALL BE FIXED WITH CEMENT MORTAR 1:3 (1 CEMENT: 3 COARSE SAND) IN BRICK WALL/BLOCK WORK WITH TILES/STONE AFTER CHASED, INCLUDING FINISHING AND PAINTING ALL-ROUND THE STONE AND MAKING AESTHETICALLY BEAUTIFUL. THEINAUGURATION STONE SHOULD CONTAIN ENGRAVED LETTERS WITH CHEMICALLY PRINTING /STAINLESS STEEL OF APPROVED MATTER IN HINDI & ENGLISH OF REQUIRED COLOUR AND SIZE ETC. AND PROVISION OF CURTAIN RAISING/SLIDING, LIGHT AND LANDSCAPING/AREA DEVELOPMENT ALL AROUND, COMPLETE AS APPROVED BY CLIENT Supplying and fixing min.18 mm thick smooth finish black granite inauguration stone of superior quality with overall size of 1000X750mm or 2000X1000(as per requirement of HPCL), with ornamental edge moulded granite / marble / cement plaster band of approved shape. The prepared block shall be fixed with cement mortar 1:3 (1 Cement: 3 Coarse sand) in brick wall/block work with tiles/stone after chased, including finishing and painting all-round the stone and making aesthetically beautiful. The inauguration stone should contain engraved letters with chemically printing /stainless steel of approved matter in Hindi & English of required colour and size etc. and provision of curtain raising/sliding, light and landscaping/area development all around, complete as approved by CLIENTDetail specifications as given in tender document. 129 Fire Steel door 11193- Square Meters 25000 995468 Yes PROVIDING AND FIXING HOLLOW METAL PRESSED STEEL DOORS HAVING TWO HOURS OF FIRE RATING WITH 16 GAUGE PRESSED STEEL FRAMES OF SIZE 125MMX45MM AND 45MM THICK SINGLE LEAF SHUTTERS OF 18 GAUGE MS SHEETS WITH STIFFENERS MADE OF CHANNEL 25 WIDE X 3.15MM THICK (DEPTH OF CHANNEL TO SUIT SHUTTER THICKNESS) SPACED NOT MORE THAN 300MM APART, HORIZONTALLY, INCLUDING ATTACHMENTS FOR FIXING ALL HARDWARE, FASTENINGS, FIXTURES AND HARDWARE AS PER DRAWING WITH MINIMUM OF 3 NOS JAMBS AND HINGES, EXTERNAL LOCKS, INTERNAL PUSH BARS (SHOULD BE OPENABLE FROM INSIDE EVEN WHEN LOCKED FROM OUTSIDE) WITH 2 COATS OF SYNTHETIC ENAMEL PAINT ON ONE COAT OF ZINC CHROMATE PRIMER ALL COMPLETE AS PER INSTRUCTIONS OF HPCL EIC FOR SINGLE SHUTTER. (MEASUREMENT FOR THE PAYMENT SHALL BE FOR THE AREA OF SHUTTER SIZE CLEAR). BUT FOR DOUBLE SHUTTER. Providing and fixing 2 hours fire rated, single/double shutter steel doors consisting of steel door frame, shutter, vision panel, insulation and hardware such as hinges, panic bar, locks/ trims for panic bar, door closer, door stopper, concealed flush bolt etc. including fixing with masonry, partition etc. all complete as per specification and approved Manufacturer's details.Detail specifications as given in tender document. 130 rolling shutter 11193- Square Meters 9000 995468 Yes SUPPLYING AND FIXING MECHANICALLY OPERATED ROLLING SHUTTERS OF APPROVED MAKE OPERABLE FROM INSIDE AND OUTSIDE CONFORMING TO IS: 6248, MADE OF 80 X 1.25 MM SIZE MILD STEEL. LATHS WITH 1.25 MM THICK TOP COVER, INTERLOCKED TOGETHER THROUGH THEIR ENTIRE LENGTH AND JOINTED TOGETHER AT THE END BY END LOCKS MOUNTED ON SPECIALLY DESIGNED PIPE SHAFT WITH BRACKETS, SIDE GUIDES AND ARRANGEMENTS FOR INSIDE AND OUTSIDE LOCKING WITH PUSH AND PULL OPERATION COMPLETE INCLUDING THE COST OF PROVIDING AND FIXING NECESSARY 27.5 CM LONG WIRE SPRINGS GRADE NO.2, MILD STEEL TOP COVER OF REQUIRED THICKNESS FOR ROLLING SHUTTERS, WITH APPROVED QUALITY RED OXIDE ZINC PRIMER AND TWO COATS OF SYNTHETIC ENAMEL PAINT OF APPROVED MAKE (ICI OR EQUIVALENT), MAKING GOOD ALL DAMAGED SURFACES, COMPLETE WITH ALL ASSOCIATED WORKS AS PER DRAWING, SPECIFICATION AND INSTRUCTION OF ENGINEER, IN GENERAL CONFORMING TO IS: 248. VENDOR SCOPE INCLUDE PREPARATION OF DRAWING AND SUBMITTING THE SAME TO HPCL APPROVED MAKE FOR REVIEW& APPROVAL. THE JOB SHALL BE CARRIED OUT AFTER FINAL APPROVAL FROM HPCL APPROVED MAKE. SCOPE INCLUDES SUPPLY AND PROVIDING SHUTTER WITH FRAMES, SUPPORTS, GEARS, THREADS, HANDLE, LOCKING ARRANGEMENT, STOPPERS, PACKING, GREASE AND ALL OTHER NECESSARY ACCESSORIES TO COMPLETE THE JOB IN ALL RESPECT. Supplying, fabricatiing and fixing of rolling shutters 80x1.25mm thick MS laths, push and pull hand operated with mechanical device chain and crank operation and with ball bearing arrangementof approved make, as per IS:6248, made of MS laths interlocked together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangement for inside and outside locking, top cover, spring and complete with two coats ofsynthetic enamel paint of approved shade and colour over a primer coat, making chases in wall/floor,grouting the clamps in PCC - M15 (20mm down size aggregate) all complete as per specifictions, drawings and instruction of Engineer.Finishing with Epoxy paint (two or more coats)on steel work at all locations prepared and applied as per manufacturer's specifications including Zinc chromate as primer, preparation of surface, etc. complete Detail specifications as given in tender document. 131 Plastic garbage bins(FRP/HDPE 11193- Each 6500 Yes DETAIL SPECIFICATION AS GIVEN IN TENDER DOCUMENT Providing and installation plastic garbage bins(FRP/HDPE) of min 120l capacity of approved model of approved make, design & spec as per standard/norms complpete with all fitting,fixtures,lids,wheels etc.Detail specifications as given in tender document. 132 Bollard- supply, inst 11193- Each 5500 Yes DETAIL SPECIFICATION AS GIVEN IN TENDER DOCUMENT Providing and fixing Bollard of approved size and make as per manufacturers detailDetail specifications as given in tender document. 133 Aluminium solar road studs- su 11193- Each 1750 Yes DETAIL SPECIFICATION AS GIVEN IN TENDER DOCUMENT Providing and fixing Aluminium solar road studs(solar LED Cateye) of size-125X125X35 of approved size and make as per manufacturers detail Detail specifications as given in tender document. 134 Readymade speed breaker- 11193- Each 6000 Yes suppl DETAIL SPECIFICATION AS GIVEN IN TENDER DOCUMENT Readymade speed breaker ABS plastic & acrylic reflectors with interlocking arrangement of reqd no. (Length-500mm, Width-400mm, Height-50mm,No. of Reflectors-4,Bolt holes-6) for different road width at specified locations Detail specifications as given in tender document. 135 European water closet - supply 11193- Each 30000 Yes SUPPLY AND FIXING WATER CLOSET: PROVIDING AND FIXING VITREOUS CHINAWARE WHITE/COLOUR WALL MOUNTED TYPE EUROPEAN WATER CLOSET WITH MATCHING CISTERN OF DUAL FLUSH TYPE, 3/6 LITRES CAPACITY, CONCEALED FLUSH PIPE ALL COMPLETE WITH C.P. BOLTS AND NUTS AND MATCHING SEAT COVER WITH C.P. HINGES, RUBBER BUFFERS ETC. COMPLETE IN ALL RESPECTS. APPROVED MAKE CAT NO. REACH 72987IN-S-0 WITH INWALL TANK CAT NO: 77027IN-MNA AND FACE PLATE CAT NO: 8857IN-M-CP OR EQUIVALENT. Providing and fixing vitreous chinaware white/ colour extended wall hung European water closet all complete with C.P. bolts & nuts with C.P. hinges, rubber buffers etc. complete in all respects. Cat No. CNS-WHT-353S with PP soft close seat cover, Hinges, Accessories Set of Jaquar or equivalent + Cistern with fittings - Cat No. CNS-WHT-203 of Jaquar or equivalent. Detail specifications as given in tender document. 136 C.P. brass health faucet- supp 11193- Each 2300 Yes PROVIDING, FIXING, TESTING AND COMMISSIONING OF CHROME PLATE BRASS HEALTH FAUCET ASSEMBLY OF FOLLOWING MAKE OR APPROVED EQUIVALENT, INCLUDING FIXING OF WALL HOOK AND 1 METER LONG FLEXIBLE TUBE, ALL COMPLETE AS PER STANDARD DESIGN, SPECIFICATION AND DIRECT Providing & fixing C.P. brass health faucet : Jaquar cat no. ALD-CHR-583 or equivalentDetail specifications as given in tender document. 137 pedestal type wash basin- sup 11193- Each 10000 Yes SUPPLY AND FIXING WASH BASIN, 55 X 40 CM:PROVIDING AND FIXING VITREOUS CHINA WARE WHITE/COLOUR UNDER COUNTER OVAL/CIRCULAR WASH BASIN (SIZE: 55 CM X 40 CM APPROXIMATELY) WITH CP BRASS WASTE, INCLUDING PROVIDING AND FIXING C1/MS BRACKETS DULY PAINTED WITH TWO OR MORE COATS OF SYNTHETIC ENAMEL PAINT COMPLETE IN ALL RESPECT. APPROVED MAKE CATALOGUE NO: CAXTON 2211IN-0 OR EQUIVALENT AND SINGLE CONTROL PILLAR TAP, CAT NO: JULY 75377IN-4-CP OF APPROVED MAKE OR EQUIVALENT. Providing and fixing white vitreous china pedestal type wash basin Cat. no.CNS-WHT-801 + CNS-WHT-301and pillar cock Cat No. KUP-CHR-35001PM of Jaquar or equivalent, complete in all respect completely recessed at the back for the reception of pipes and fittings all completeDetail specifications as given in tender document. 138 flat back half stall urinal wi 11193- Each 13500 995462 Yes SUPPLYING AND FIXING URINAL WITH SENSOR OF APPROVED MAKE. Providing and fixing white vitreous china flat back half stall urinal with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass including painting of fittings and cutting and making good the walls and floors wherever required : Jaquar cat no. URS-WHT-13259 or equivalent.Detail specifications as given in tender document. 139 float glass frameless mirror- 11193- Each 4000 Yes DETAIL SPECIFICATION AS GIVEN IN TENDER DOCUMENT 5.5 mm thick float glass frameless mirror fixed with stainless steel studs, all completeDetail specifications as given in tender document. 140 soap dish (brass)- supply, in 11193- Each 800 Yes DETAIL SPECIFICATION AS GIVEN IN TENDER DOCUMENT Providing and fixing soap dish (brass) of Jaquar cat no. ACN-CHR-1131N or equivalentDetail specifications as given in tender document. 141 brass bib cock 11193- Each 2600 995462 Yes BIB COCK/PILLAR COCK PROVIDING AND FIXING BRASS BIB COCK OF APPROVED QUALITY: FOR 15 MM NOMINAL BOREBASIC PRICE AND MAKE/MODEL OF THIS ITEM SHALL BE AS SPECIFIED IN THE TENDER. Jaquar cat. no. KUP-CHR-35037PM or equivalentDetail specifications as given in tender document. 142 Two in one bib cock 11193- Each 3000 995462 Yes SUPPLY AND INSTALLATION OF CP BRASS BIB COCK 15 MM SIZE LONG NOSE PEELER TAP (APPROVED MAKE) OF SUPERIOR QUALITY OF APPROVED MAKE OF ISI MARK, AS PER THE TENDER SPECS AND DIRECTION OF ENGINEER IN-CHARGE. Two in one bib cock, Jaquar cat. no. KUP-CHR-35041PM or equivalentDetail specifications as given in tender document. 143 brass concealed stop cock 11193- Each 1600 995462 Yes SUPPLYING AND FIXING OF THE FOLLOWING JAQUAR OR EQUIVALENT CONCEALED STOP : CONCEALED STOP COCK ALIVE - CATALOGUE MODEL NO. - ALI-85083K OF JAQUAR.NOTE: THE EQUIVALENT MAKE SHALL BE APPROVED BY THE ENGINEER-INCHARGE. Providing and fixing C.P. brass concealed stop cock Jaquar cat. no. CQT-CHR-23083 or equivalentDetail specifications as given in tender document. 144 twin coat hook/ robe hook 11193- Each 1200 995476 Yes SUPPLYING, FIXING OF HPCL APPROVED MAKE CHROME PLATED TWIN ROBE HOOK WITH CHROME PLATED SCREWS ETC. COMPLETE. FIXED ON THE TOILET DOOR. BASIC PRICE AND TYPE OF THIS ITEMS SHALL BE AS SPECIFIED IN THE TENDER. Providing and fixing CP brass twin coat hook/ robe hook in position - Jaquar cat. no. AQN-CHR-7761 or equivalentDetail specifications as given in tender document. 145 Waste Coupling for wash basin 11193- Each 750 995462 Yes WASTE COUPLING: SUPPLY AND FIXING CP BRASS WASTE COUPLINGS OF APPROVED MAKE UPTO 2 INCH DIAMETER. JOB TO INCLUDE REMOVAL OF EXISTING ONE IF ANY AND MAKING GOOD THE SURROUND SURFACE AREA WITH NECESSARY FILLING MATERIAL ALL COMPLETE AS PER DIRECTION OF ENGINEER-IN-CHARGE. Providing and fixing CP Brass Waste Coupling for wash basin and sink, of JAQUAR Cat No. ALD-CHR-705 or equivalentDetail specifications as given in tender document. 146 brass towel rail 450mm 11193- Each 1750 995468 Yes PROVIDING AND FIXING CP BRASS TOWEL RAIL OF 20 MM DIA AND 600 MM LONG INCLUDING ALL ACCESSORIES SUCH AS BRACKETS (COLOURED), FIXED AND ANCHORING ETC. COMPLETE AS DIRECTED.BASIC PRICE AND MAKE/MODEL SHALL BE AS SPECIFIED IN TENDER. Providing and fixing CP brass towel rail 450mm long of Jaquar cat. no. ACN-CHR-1111BNM or equivalent Detail specifications as given in tender document. 147 Flexible P.V.C. waste pipe for 11193- Each 90 995423 Yes SUPPLY AND FIXING OF UPVC WASTE PIPE (32 MM DIAMETER) FROM BOTTLE TRAP TO NAHANI TRAP WITH SUPPLY OF NECESSARY UPVC SPECIALS OF APPROVED BRAND (SPECIALS LIKE ELBOWS, BENDS, AND TEE ETC. COMPLETE) INCLUDING GROOVE CUTTING BY MACHINE, SOLVENT, CEMENT, HEMP YARN FOR WATER-TIGHT JOINTS INCLUDING TESTING, MAKING HOLES, GROOVING IN WALLS AND ROOF AND MAKING GOOD THE DAMAGES BY BRINGING THEM TO GOOD ORIGINAL CONDITION AND COMPLETE IN ALL RESPECTS AS PER DIRECTIONS OF ENGINEER-IN- CHARGE/CONSULTANT. Providing and fixing 32mm dia Flexible P.V.C. waste pipe for sink or wash basin includingP.V.C. waste fittings complete.Detail specifications as given in tender document. 148 emergency eye wash- supply, in 11193- Each 20000 998739 Yes FIXING IN POSITION EMERGENCY EYE WASH, TABLE MOUNTED WITH TWO GENTLE SPRAY OUTLET HEADS AND STAY OPEN BALL VALVE WITH NECESSARY ACCESSORIES, ALL COMPLETE PER THE DIRECTION OF ENGINEER-IN-CHARGE. RATE SHALL INCLUDE ALL PLUMBING AND ACCESSORIES. Providing and fixing Eye/face wash, model no.7001 pedestal-mounted from Tobit Engineers, complete with all by-works including materials for water inlet & ouletDetail specifications as given in tender document. 149 TREE PLANTATION 11193- Each 1000 998597 Yes PLANTATION WORK: DIGGING OF PITS OF SIZE 1 X 1 X 1 METER IN ANY TYPE OF SOIL, REFILLING OF PITS AFTER DE-WEEDING WITH A MIXTURE OF GOOD EARTH AND COW DUNG ORGANIC MANURE IN THE RATIO OF 3:1 (THREE PART OF GOOD EARTH AND ONE PART OF ORGANIC MANURE). FLOODING THE PIT WITH WATER SO THAT THE EARTH MANURE MIXTURE SETTLES DOWN. (GOOD EARTH IF REQUIRED ADDITIONALLY ON ACTUAL MEASUREMENT BASIS AFTER THE REDUCTION OF 20% ITS VOLUME FOR ITS POROSITY). SUPPLY AND PLANTATION OF APPROVED VARIETY OF TREE SAPLING, DISEASE FREE HEALTHY, FULLY ESTABLISHED 1-2 YEARS OLD WITH WELL-DEVELOPED ROOT SYSTEM, IN THE CENTER OF PITS WITH A CLEAR MINIMUM HEIGHT OF 4 FEET. AFTER THE PLANTATION, PROPER STACKING AND WATERING AND CARING FOR 06 MONTHS REGULARLY AS THE MINIMUM GUARANTEE PERIOD ALL COMPLETE INCLUDING SUPPLYING AND MIXING OF GOOD EARTH AND MANURE.HEALTHY PROPERLY GROWN TREES (AT LEAST 6 MONTHS OLD) SHOULD BE PROVIDED DURING HANDOVER ON COMPLETION OF THE PROJECT. (VARIETIES LIKE POLYALTHEA/GREVILLEA/CALLISTEMON OR DOXIA/MINUSOPS ELENGI/CASSIA FISTULA/FICUS INFECTORIA/ALSTONIA/AZADIRACHTA INDICA/PLUMERIA ALBA/PELTOFORUM/BOMBOX, DELONIX REGIA.) Digging of pits of size 1.0mx1.0mx1.0m in any type of soil, Refilling of pits after deweeding with a mixture of good earth and cow dung organic manure in the ratio of 3:1 (Three part of good earth and one part of organic manure). Flooding the pit with water so that the earth manure mixture settles down.(Good earth if required to be added after the reduction of 20% its volume for its porosity) Supply and plantation of approved variety of tree sapling,disease free healthy, fully established 1-2 years old with well developed root system, in the centre of pits with a clear minimum height of 4 ft. after the plantation, proper stacking and watering and caring for 06 months regularly as the minimum guarantee period all complete including supplying & mixing of good earth & manure. Healthy properly grown trees (atleast 6 months old) should be provided during handover on completion of the project. (Varieties like Acacia/ Azadirachta Indica/ Pongamia pinnata or approved local equivalent)Detail specifications as given in tender document. 150 SHRUB PLANTATION 11193- Each 700 998597 Yes SUPPLY AND PLANTATION OF SHRUBS: CLEARANCE OF AREA, DIGGING OF PITS OF SIZE 0.60 X 0.60 X 0.60 METER, REMOVAL OF WEEDS, DE-BRIES, ROOTS AND DISPOSAL WITHIN THE REFINERY AND REFILLING WITH GOOD AGRICULTURE SOIL AND CATTLE MANURE IN 2:1 RATIO. SUPPLY AND PLANTING OF APPROVED SPECIES OF HEALTHY, GROWN UP SHRUB WITH GOOD ROOT SYSTEM AND MINIMUM 0.6 METER HEIGHT FROM GROUND LEVEL AFTER PLANTATION. MAINTENANCE INCLUDES REGULAR WATERING, DE-WEEDING, LOOSENING OF SOIL, MANURING WITH CATTLE MANURE AND FERTILIZER. TRIMMING, PRUNING, STAKING AND SPRAYING OF INSECTICIDE AND FUNGICIDE AS AND WHEN REQUIRED FOR A PERIOD OF 6 MONTHS. DURING THIS PERIOD, ANY OF THE DEAD/DECAYED SHRUBS SHALL BE REPLACED IMMEDIATELY. PAYMENTS: 60% WILL BE PAID UPON SUPPLY. 40% UPON SATISFACTORY MAINTENANCE FOR A PERIOD OF 6 MONTHS FROM DATE OF SUPPLY. Digging of beds of required size and 60 cms.depth in any type of soil. Refilling the pits after deweeding, with a mixture of good earth and cow dung organic manure in the ratio of 3:1 (Three part of good warth and one part of organic manure). Flooding the bed with water so that the earth and manure mixture settles down in pits. (Good earth if required to be added after the reduction of 20% by its volume). Supply and plantation of approved shrub species sapling of good quality, disease free, healthy, fully estabilished 1-2 year oil with well developed root system in the centre of pit, with a clear minimum height of 600mm after plantation and spacing 1500mm. Watering for 06 months regularaly as the minimum guarantee period, all complete including supplying & mixing of good earth & manure. Healthy properly grown shrubs (atleast 6 months old) should be provided during handover on completion of the project. (Varieties : Tabrena Montana/ Murraya/Plumeria alba or approved local Equivalent).Detail specifications as given in tender document. 151 Sun control films 11193- Square Meters 1000 995471 Yes PROVIDING AND FIXING OF SUN CONTROL REFLECTIVE FILM OF HPCL APPROVED EQUIVALENT MAKE ON GLAZED DOOR OR WINDOW PANELS AS PER MANUFACTURER’S SPECIFICATIONS, AND AS DIRECTED BY HPCL EIC. Providing & applying Polyster Sun control & safety films for glazing, Reflective film of type BRONZE 10 with glare reduction of 89% & total solar energy rejection of 79%Detail specifications as given in tender document. 152 SITC of NFLP I-LDB 11193- Each 10500 Yes DETAIL SPECIFICATION AS GIVEN IN TENDER DOCUMENT Surface/Recess mounted Building Lighting Panel (I-LDB) for SV Stations consisting of 240V, 1 Ph, 50Hz,1No 32A (100mA sensitivity) DP ELCB+MCB as Incomer and 240V, 1 Ph, 50Hz, 10 Nos. 6A DP MCBs and 5 nos. 16A DP MCBs as out goings complete with ammeter, indication lamp, Cu busbar etc.Detail specifications as given in tender document. 153 SITC of NFLP PP-LDB 11193- Each 12000 Yes DETAIL SPECIFICATION AS GIVEN IN TENDER DOCUMENT Surface/Recess mounted Building Power Point Panel (PP-LDB) for SV Stations consisting of 240V, 1 Ph, 50Hz,1No 32A (100mA sensitivity) DP ELCB+MCB as Incomer and 240V, 1 Ph, 50Hz, 5 nos. 20A DP MCB & 5 nos. 16A DP MCBs as out goings complete with ammeter, indication lamp, Cu busbar etc.Detail specifications as given in tender document. 154 SITC of NFLP O-LDB 11193- Each 15000 Yes DETAIL SPECIFICATION AS GIVEN IN TENDER DOCUMENT Surface/Recess Outdoor Lighting Panel (O-LDB) for SV Stations consisting of 240V, 1 Ph, 50Hz,1No 63A (100mA sensitivity) DP ELCB+MCB as Incomer and 240V, 1 Ph, 50Hz, 10 nos. 20/16A DP MCBs as out goings complete with Contactor, timer, A/M switch, PB with timer,ammeter and 5 Nos. 20/16 Amp DP MCBs without timer , indication lamp, etc .Detail specifications as given in tender document. 155 SITC of NFLP C-LDB 11193- Each 8500 Yes DETAIL SPECIFICATION AS GIVEN IN TENDER DOCUMENT Surface/Recess Critical Lighting Panel (C-LDB) for SV Stations consisting of 240V, 1 Ph, 50Hz,1No 32A (100mA sensitivity) DP ELCB+MCB as Incomer and 240V, 1 Ph, 50Hz, 06 Nos. 6A DP MCBs. as out goings complete with indication lamp etc. ( Feed from UPS ACDB)Detail specifications as given in tender document. 156 SITC of NFLP I-LDB 11193- Each 37500 Yes DETAIL SPECIFICATION AS GIVEN IN TENDER DOCUMENT Surface/Recess mounted Building Lighting Panel (I-LDB) for Electrical Substation Building at DS Lighting consisting of 415V, 3 Ph, 50Hz, 1 no. 63 Amp (100mA sensitivity) 4 Pole RCCB as incomer and 20 Nos. 6A DP MCBs. 5 nos. 16A DP MCBs & 5 Nos. 20A DP MCBs as out goings complete with ammeter, indication lamp, Cu busbar etc.Detail specifications as given in tender document. 157 SITC of NFLP PP-LDB 11193- Each 50000 Yes DETAIL SPECIFICATION AS GIVEN IN TENDER DOCUMENT Surface/Recess mounted Building Power Point Distribution Board (PP-LDB) for Building Power Points, AC's etc for Electrical Substation Building at DS consisting of 415V, 3 Ph, 50Hz, 1 no. 100 Amp (100mA sensitivity) 4 Pole RCCB as incomer and 5 nos. 20A DP MCB & 10 nos. 16A DP MCBs as out goings complete with ammeter, indication lamp, Cu busbar etc.Detail specifications as given in tender document. 158 SITC of NFLP O-LDB 11193- Each 40000 Yes DETAIL SPECIFICATION AS GIVEN IN TENDER DOCUMENT Surface/Recess mounted Outdoor Lighting Panel (O-LDB) for Electrical Substation Building consisting of 415V, 3 Ph, 50Hz, 1 no. 63 Amp (100mA sensitivity) 4 Pole RCCB as incomer and 15 nos. 16A DP MCBs as out goings complete with Contactor, timer, A/M switch, PB with timer and 5 Nos. 20/16 Amp DP MCBs without timer etc. Ammeter and Indication lamp at input, with Cu busbar etc.Detail specifications as given in tender document. 159 SITC of NFLP E-LDB 11193- Each 40000 Yes DETAIL SPECIFICATION AS GIVEN IN TENDER DOCUMENT Surface/Recess mounted Industrial Type Emeregency Lighting Panel (E-LDB) 240V, 1 Ph, 50Hz,1No 32A (100mA sensitivity) DP ELCB+MCB as Incomer and 8 nos 10A, 10kA SPN MCB as outgoing feeders complete with indication lamp, cu busbar etc. Detail specifications as given in tender document. 160 SITC of FP ELDB 11193- Each 65000 Yes DETAIL SPECIFICATION AS GIVEN IN TENDER DOCUMENT Surface/Recess mounted Flameproof Type (suitable for Ex-d, Zone-1&2, Gas grp IIA/IIB, Temp. class T6) Lighting Panel (FLP LDB) for Pumphouse Shed at DS consisting of 415V,3 Ph, 50Hz, 63A FP MCCB as incomer and 20 Nos. 6A DP MCBs; 5 nos. 16A DP MCBs & 5 Nos. 20A DP MCBs out goings complete with ammeter ,indication lamp, Cu busbar etc.Detail specifications as given in tender document. 161 SITC of FP ELDB 11193- Each 50000 Yes DETAIL SPECIFICATION AS GIVEN IN TENDER DOCUMENT Surface/Recess mounted Flameproof Type (suitable for Ex-d, Zone-1&2, Gas grp IIA/IIB, Temp. class T6) Emergency Lighting Panel (FLP ELDB) for Mainline Pumphouse Shed at DS consisting of 240V, 1 Ph, 50Hz,1No 32A DP ELCB+MCB as Incomer and 240V, 1 Ph, 50Hz, 4 nos. 6A DP MCB outgoings complete with indication, Cu busbar etc.Detail specifications as given in tender document. 162 Earth Pits- GI PIPE Electrode 11193- Each 14000 995461 Yes ADVANCED MAINTENANCE FREE ENVIRONMENT FRIENDLY EARTHING SYSTEM CONSISTING OF 1 NO. OF 3MTR LENGTH, 25 MM DIA UL CERTIFIED EARTH ELECTRODE MADE OF HIGH TENSILE LOW CARBON STEEL CIRCULAR RODS, MOLECULARLY BONDED COPPER ON OUTER SURFACE (MINIMUM COPPER BONDING THICKNESS-250 MICRONS) WITH GI/CU TERMINALS TO CONNECT INCOMING STRIPS, CHAMBER ETC. INCLUDING GROUND ENHANCING CHEMICAL BACKFILL COMPOUND FOR EARTH PIT, IT DOES NOT ATTACK THE SOIL OR CORRODE THE METAL ELECTRODES ,COMPLETE IN ALL RESPECT (ENVIRONMENT FRIENDLY BACKFILL COMPOUND DULY CERTIFIED AS PER ANSI/NSF STANDARD 60/TOXIC CONTENT CERTIFICATE AS SAFE FOR USE NEAR POTABLE GROUND WATER RESOURCES. Supply, Installation, Testing and Commissioning of of below mentioned Earthbus/ Earthing Cable/GI Wire/GI Wire Rope/ GI MS Strip/Cu Strip/earthpit/Lightning Rod etc and all accessories and fixing material as per approved drawings, layouts, specifications, datasheets, vendor list etc. including supply of installation material as per installation details with any additional material as per actual site requirement and/or instructions of site-in-charge etc. so as to ensure the completeness of installation work. Note that these quantities are approximate and payment shall be made for actual equipment / materials installed by the Contractor as part of permanent installation based on Issued for Construction drawings. Any balance material supplied by Contractor but not permanently installed at site shall be taken back by Contractor and shall not be billed to Purchaser and/or Consultant. Contractor shall consider all associated work as indicated in respective installation standard drawings, scope of work and as per the directions of the Engineer-in-charge.Earth Pits- GI PIPE Electrode with 6 mm thick chequered plate cover Detail specifications as given in tender document. 163 Earth Pits- Copper plate Elect 11193- Each 20000 Yes SUPPLY AND LAYING OF EARTH PIT COPPER PLATE ELECTRODE WITH 6 MM THICK CHEQUERED PLATE COVER/SFRC(SIZE 600 X 550 MM). Supply, Installation, Testing and Commissioning of of below mentioned Earthbus/ Earthing Cable/GI Wire/GI Wire Rope/ GI MS Strip/Cu Strip/earthpit/Lightning Rod etc and all accessories and fixing material as per approved drawings, layouts, specifications, datasheets, vendor list etc. including supply of installation material as per installation details with any additional material as per actual site requirement and/or instructions of site-in-charge etc. so as to ensure the completeness of installation work. Note that these quantities are approximate and payment shall be made for actual equipment / materials installed by the Contractor as part of permanent installation based on Issued for Construction drawings. Any balance material supplied by Contractor but not permanently installed at site shall be taken back by Contractor and shall not be billed to Purchaser and/or Consultant. Contractor shall consider all associated work as indicated in respective installation standard drawings, scope of work and as per the directions of the Engineer-in- charge.Earth Pits- Copper plate Electrode with 6 mm thick chequered plate coverDetail specifications as given in tender document. 164 GI Strip (50X6) mm 11193- Meters 465 995461 Yes EARTH MATERIAL (EARTH CONDUCTORS FOR EQUIPMENT EARTHING) EARTHING SYSTEM SHALL COMPLY WITH REQUIREMENTS OF IS- 3043 IEEE-80. 50 MM X 6 MM G.I.STRIP Supply, Installation, Testing and Commissioning of of below mentioned Earthbus/ Earthing Cable/GI Wire/GI Wire Rope/ GI MS Strip/Cu Strip/earthpit/Lightning Rod etc and all accessories and fixing material as per approved drawings, layouts, specifications, datasheets, vendor list etc. including supply of installation material as per installation details with any additional material as per actual site requirement and/or instructions of site-in-charge etc. so as to ensure the completeness of installation work. Note that these quantities are approximate and payment shall be made for actual equipment / materials installed by the Contractor as part of permanent installation based on Issued for Construction drawings. Any balance material supplied by Contractor but not permanently installed at site shall be taken back by Contractor and shall not be billed to Purchaser and/or Consultant. Contractor shall consider all associated work as indicated in respective installation standard drawings, scope of work and as per the directions of the Engineer-in-charge.GI Strip (50X6) mmDetail specifications as given in tender document. 165 GI Strip (25X3) mm 11193- Running Meter 250 Yes DETAIL SPECIFICATION AS GIVEN IN TENDER DOCUMENT Supply, Installation, Testing and Commissioning of of below mentioned Earthbus/ Earthing Cable/GI Wire/GI Wire Rope/ GI MS Strip/Cu Strip/earthpit/Lightning Rod etc and all accessories and fixing material as per approved drawings, layouts, specifications, datasheets, vendor list etc. including supply of installation material as per installation details with any additional material as per actual site requirement and/or instructions of site-in-charge etc. so as to ensure the completeness of installation work. Note that these quantities are approximate and payment shall be made for actual equipment / materials installed by the Contractor as part of permanent installation based on Issued for Construction drawings. Any balance material supplied by Contractor but not permanently installed at site shall be taken back by Contractor and shall not be billed to Purchaser and/or Consultant. Contractor shall consider all associated work as indicated in respective installation standard drawings, scope of work and as per the directions of the Engineer-in-charge.GI Strip (25X3) mmDetail specifications as given in tender document. 166 Copper Strip (25X3) mm 11193- Running Meter 850 Yes DETAIL SPECIFICATION AS GIVEN IN TENDER DOCUMENT Supply, Installation, Testing and Commissioning of of below mentioned Earthbus/ Earthing Cable/GI Wire/GI Wire Rope/ GI MS Strip/Cu Strip/earthpit/Lightning Rod etc and all accessories and fixing material as per approved drawings, layouts, specifications, datasheets, vendor list etc. including supply of installation material as per installation details with any additional material as per actual site requirement and/or instructions of site-in-charge etc. so as to ensure the completeness of installation work. Note that these quantities are approximate and payment shall be made for actual equipment / materials installed by the Contractor as part of permanent installation based on Issued for Construction drawings. Any balance material supplied by Contractor but not permanently installed at site shall be taken back by Contractor and shall not be billed to Purchaser and/or Consultant. Contractor shall consider all associated work as indicated in respective installation standard drawings, scope of work and as per the directions of the Engineer-in-charge.Copper Strip (25X3) mmDetail specifications as given in tender document. 167 10 mm (3/8") dia GI wire flexi 11193- Running Meter 200 Yes DETAIL SPECIFICATION AS GIVEN IN TENDER DOCUMENT Supply, Installation, Testing and Commissioning of of below mentioned Earthbus/ Earthing Cable/GI Wire/GI Wire Rope/ GI MS Strip/Cu Strip/earthpit/Lightning Rod etc and all accessories and fixing material as per approved drawings, layouts, specifications, datasheets, vendor list etc. including supply of installation material as per installation details with any additional material as per actual site requirement and/or instructions of site-in-charge etc. so as to ensure the completeness of installation work. Note that these quantities are approximate and payment shall be made for actual equipment / materials installed by the Contractor as part of permanent installation based on Issued for Construction drawings. Any balance material supplied by Contractor but not permanently installed at site shall be taken back by Contractor and shall not be billed to Purchaser and/or Consultant. Contractor shall consider all associated work as indicated in respective installation standard drawings, scope of work and as per the directions of the Engineer-in-charge.10 mm (3/8") dia GI wire flexible rope Detail specifications as given in tender document. 168 FP Flood LED 72W 11193- Each 18000 Yes DETAIL SPECIFICATION AS GIVEN IN TENDER DOCUMENT Supply, Installation, Testing and Commissioning of below mentioned Flameproof type (suitable for Ex-d, Zone-1&2, Gas grp IIA/IIB, Temp. class T6) Lighting Fixtures, Exhaust Fan , JBs etc with control gear box as per the type of fixture, lamps as per approved drawings, layouts, specifications, datasheets, approved vendor list etc. CONTRACTOR shall be responsible for selection and supply of exactly suitable material as per the layouts, datasheets, specifications and actual site conditions for safe and standard installation. Rate shall include mounting of fixture along with its accessories like chokes, condensers, reflectors, control gear boxes and lamps, checking of internal wiring. All consumables such as ball and socket, hanger rods, lugs, glands, GI chains, hardwares, anchor-fasteners etc. are in the scope of the contractor. Note that these quantities are approximate and payment shall be made for actual equipment / materials installed by the Contractor as part of permanent installation based on Issued for Construction drawings. Actual billing shall be done only on permanently installed quantities and not on supplied quantities. Any balance material supplied by Contractor but not permanently installed at site shall be taken back by Contractor and shall not be billed to Purchaser and/or Consultant. Contractor shall consider all associated work as indicated in respective installation standard drawings, scope of work and as per the directions of the Engineer-in-charge. Flame proof Integral flood lighting fixture (for 72W LED) on building/ structure/pole, lighting fixture type : FLPW-2595 of M/s Baliga make or equivalentDetail specifications as given in tender document. 169 FP Flood LED 150W 11193- Each 28000 Yes DETAIL SPECIFICATION AS GIVEN IN TENDER DOCUMENT Supply, Installation, Testing and Commissioning of below mentioned Flameproof type (suitable for Ex-d, Zone-1&2, Gas grp IIA/IIB, Temp. class T6) Lighting Fixtures, Exhaust Fan , JBs etc with control gear box as per the type of fixture, lamps as per approved drawings, layouts, specifications, datasheets, approved vendor list etc. CONTRACTOR shall be responsible for selection and supply of exactly suitable material as per the layouts, datasheets, specifications and actual site conditions for safe and standard installation. Rate shall include mounting of fixture along with its accessories like chokes, condensers, reflectors, control gear boxes and lamps, checking of internal wiring. All consumables such as ball and socket, hanger rods, lugs, glands, GI chains, hardwares, anchor-fasteners etc. are in the scope of the contractor. Note that these quantities are approximate and payment shall be made for actual equipment / materials installed by the Contractor as part of permanent installation based on Issued for Construction drawings. Actual billing shall be done only on permanently installed quantities and not on supplied quantities. Any balance material supplied by Contractor but not permanently installed at site shall be taken back by Contractor and shall not be billed to Purchaser and/or Consultant. Contractor shall consider all associated work as indicated in respective installation standard drawings, scope of work and as per the directions of the Engineer-in-charge. Flame proof Integral flood lighting fixture (for 150W LED) on building/ structure/pole, lighting fixture type : FLPW-2595 of M/s Baliga make or equivalentDetail specifications as given in tender document. 170 Industrial FP LED 11193- Each 12000 Yes DETAIL SPECIFICATION AS GIVEN IN TENDER DOCUMENT Supply, Installation, Testing and Commissioning of below mentioned Flameproof type (suitable for Ex-d, Zone-1&2, Gas grp IIA/IIB, Temp. class T6) Lighting Fixtures, Exhaust Fan , JBs etc with control gear box as per the type of fixture, lamps as per approved drawings, layouts, specifications, datasheets, approved vendor list etc. CONTRACTOR shall be responsible for selection and supply of exactly suitable material as per the layouts, datasheets, specifications and actual site conditions for safe and standard installation. Rate shall include mounting of fixture along with its accessories like chokes, condensers, reflectors, control gear boxes and lamps, checking of internal wiring. All consumables such as ball and socket, hanger rods, lugs, glands, GI chains, hardwares, anchor-fasteners etc. are in the scope of the contractor. Note that these quantities are approximate and payment shall be made for actual equipment / materials installed by the Contractor as part of permanent installation based on Issued for Construction drawings. Actual billing shall be done only on permanently installed quantities and not on supplied quantities. Any balance material supplied by Contractor but not permanently installed at site shall be taken back by Contractor and shall not be billed to Purchaser and/or Consultant. Contractor shall consider all associated work as indicated in respective installation standard drawings, scope of work and as per the directions of the Engineer-in-charge. Industrial Flame proof fluorescent lamp fitting with LED lamp (type EXTN2LT8-20 of CG make or equivalent).Detail specifications as given in tender document. 171 Flame Proof 12" Exhaust Fan 11193- Each 15000 Yes DETAIL SPECIFICATION AS GIVEN IN TENDER DOCUMENT Supply, Installation, Testing and Commissioning of below mentioned Flameproof type (suitable for Ex-d, Zone-1&2, Gas grp IIA/IIB, Temp. class T6) Lighting Fixtures, Exhaust Fan , JBs etc with control gear box as per the type of fixture, lamps as per approved drawings, layouts, specifications, datasheets, approved vendor list etc. CONTRACTOR shall be responsible for selection and supply of exactly suitable material as per the layouts, datasheets, specifications and actual site conditions for safe and standard installation. Rate shall include mounting of fixture along with its accessories like chokes, condensers, reflectors, control gear boxes and lamps, checking of internal wiring. All consumables such as ball and socket, hanger rods, lugs, glands, GI chains, hardwares, anchor-fasteners etc. are in the scope of the contractor. Note that these quantities are approximate and payment shall be made for actual equipment / materials installed by the Contractor as part of permanent installation based on Issued for Construction drawings. Actual billing shall be done only on permanently installed quantities and not on supplied quantities. Any balance material supplied by Contractor but not permanently installed at site shall be taken back by Contractor and shall not be billed to Purchaser and/or Consultant. Contractor shall consider all associated work as indicated in respective installation standard drawings, scope of work and as per the directions of the Engineer-in-charge. Flame Proof 12" Exhaust Fan.0.25HP motor,1440 rpm. Detail specifications as given in tender document. 172 3Cx 2.5 mm2 YWY ( HR+FRL 11193- Running Meter 190 995423 Yes LAYING OF 3CX2.5MM2 FS POWER CABLE Supply, Installation, Testing and Commissioning of below mentioned Flameproof type (suitable for Ex-d, Zone-1&2, Gas grp IIA/IIB, Temp. class T6) Lighting Fixtures, Exhaust Fan , JBs etc with control gear box as per the type of fixture, lamps as per approved drawings, layouts, specifications, datasheets, approved vendor list etc. CONTRACTOR shall be responsible for selection and supply of exactly suitable material as per the layouts, datasheets, specifications and actual site conditions for safe and standard installation. Rate shall include mounting of fixture along with its accessories like chokes, condensers, reflectors, control gear boxes and lamps, checking of internal wiring. All consumables such as ball and socket, hanger rods, lugs, glands, GI chains, hardwares, anchor-fasteners etc. are in the scope of the contractor. Note that these quantities are approximate and payment shall be made for actual equipment / materials installed by the Contractor as part of permanent installation based on Issued for Construction drawings. Actual billing shall be done only on permanently installed quantities and not on supplied quantities. Any balance material supplied by Contractor but not permanently installed at site shall be taken back by Contractor and shall not be billed to Purchaser and/or Consultant. Contractor shall consider all associated work as indicated in respective installation standard drawings, scope of work and as per the directions of the Engineer-in-charge. 3Cx 2.5 mm2 YWY ( HR+FRLS)Detail specifications as given in tender document. 173 FP Junction BOX 11193- Each 10000 Yes DETAIL SPECIFICATION AS GIVEN IN TENDER DOCUMENT Supply, Installation, Testing and Commissioning of below mentioned Flameproof type (suitable for Ex-d, Zone-1&2, Gas grp IIA/IIB, Temp. class T6) Lighting Fixtures, Exhaust Fan , JBs etc with control gear box as per the type of fixture, lamps as per approved drawings, layouts, specifications, datasheets, approved vendor list etc. CONTRACTOR shall be responsible for selection and supply of exactly suitable material as per the layouts, datasheets, specifications and actual site conditions for safe and standard installation. Rate shall include mounting of fixture along with its accessories like chokes, condensers, reflectors, control gear boxes and lamps, checking of internal wiring. All consumables such as ball and socket, hanger rods, lugs, glands, GI chains, hardwares, anchor-fasteners etc. are in the scope of the contractor. Note that these quantities are approximate and payment shall be made for actual equipment / materials installed by the Contractor as part of permanent installation based on Issued for Construction drawings. Actual billing shall be done only on permanently installed quantities and not on supplied quantities. Any balance material supplied by Contractor but not permanently installed at site shall be taken back by Contractor and shall not be billed to Purchaser and/or Consultant. Contractor shall consider all associated work as indicated in respective installation standard drawings, scope of work and as per the directions of the Engineer-in-charge. Flameproof , wall/structure mount, metal- clad, Ultra violet resistant, IP55, 4 way Flameproof Junction Boxes of size: (100 x 100 x 50) mm. for Sample Room, Battery Room etcDetail specifications as given in tender document. 174 SITC of Surface mounted LED 11193- Each 7500 Yes DETAIL SPECIFICATION AS GIVEN IN TENDER DOCUMENT Supply, Installation, testing & commissioning of point wiring as per details in construction drawing & specification includes PVC conduits, falt batten etc as per approved drawings, layouts, specifications, datasheets, approved vendor list etc.CONTRACTOR shall be responsible for selection and supply of exactly suitable material as per the layouts, datasheets, specifications and actual site conditions for safe and standard installation. Rate shall include mounting of fixture along with its accessories like chokes, condensers, reflectors, control gear boxes and lamps, checking of internal wiring. All consumables such as ball and socket, hanger rods, lugs, glands, GI chains, hardwares, anchor-fasteners etc. are in the scope of the contractor. Note that these quantities are approximate and payment shall be made for actual equipment / materials installed by the Contractor as part of permanent installation based on Issued for Construction drawings. Any balance material supplied by Contractor but not permanently installed at site shall be taken back by Contractor and shall not be billed to Purchaser and/or Consultant. Contractor shall consider all associated work as indicated in respective installation standard drawings, scope of work and as per the directions of the Engineer-in-charge. Surface mounted LED light fixture with LED lamp (type LCTLRN-36 -CDL/ LCTLSNE-36-CDL of CG make or equivalent).Detail specifications as given in tender document. 175 SITC of Recess mounted LED 11193- Each 8000 Yes DETAIL SPECIFICATION AS GIVEN IN TENDER DOCUMENT Supply, Installation, testing & commissioning of point wiring as per details in construction drawing & specification includes PVC conduits, falt batten etc as per approved drawings, layouts, specifications, datasheets, approved vendor list etc.CONTRACTOR shall be responsible for selection and supply of exactly suitable material as per the layouts, datasheets, specifications and actual site conditions for safe and standard installation. Rate shall include mounting of fixture along with its accessories like chokes, condensers, reflectors, control gear boxes and lamps, checking of internal wiring. All consumables such as ball and socket, hanger rods, lugs, glands, GI chains, hardwares, anchor-fasteners etc. are in the scope of the contractor. Note that these quantities are approximate and payment shall be made for actual equipment / materials installed by the Contractor as part of permanent installation based on Issued for Construction drawings. Any balance material supplied by Contractor but not permanently installed at site shall be taken back by Contractor and shall not be billed to Purchaser and/or Consultant. Contractor shall consider all associated work as indicated in respective installation standard drawings, scope of work and as per the directions of the Engineer-in-charge. Recess mounted LED light fixture with LED lamp (type LCTLSN-36 -CDL/ LCTLSNE-36-CDL of CG make or equivalent).Detail specifications as given in tender document. 176 SITC of Surface mounted LED 11193- Each 6000 Yes DETAIL SPECIFICATION AS GIVEN IN TENDER DOCUMENT Supply, Installation, testing & commissioning of point wiring as per details in construction drawing & specification includes PVC conduits, falt batten etc as per approved drawings, layouts, specifications, datasheets, approved vendor list etc.CONTRACTOR shall be responsible for selection and supply of exactly suitable material as per the layouts, datasheets, specifications and actual site conditions for safe and standard installation. Rate shall include mounting of fixture along with its accessories like chokes, condensers, reflectors, control gear boxes and lamps, checking of internal wiring. All consumables such as ball and socket, hanger rods, lugs, glands, GI chains, hardwares, anchor-fasteners etc. are in the scope of the contractor. Note that these quantities are approximate and payment shall be made for actual equipment / materials installed by the Contractor as part of permanent installation based on Issued for Construction drawings. Any balance material supplied by Contractor but not permanently installed at site shall be taken back by Contractor and shall not be billed to Purchaser and/or Consultant. Contractor shall consider all associated work as indicated in respective installation standard drawings, scope of work and as per the directions of the Engineer-in-charge. Surface mounted LED light fixture with LED lamp (type LCTLRN-18 -CDL of CG make or equivalent).Detail specifications as given in tender document. 177 SITC of Recess mounted LED 11193- Each 6500 Yes DETAIL SPECIFICATION AS GIVEN IN TENDER DOCUMENT Supply, Installation, testing & commissioning of point wiring as per details in construction drawing & specification includes PVC conduits, falt batten etc as per approved drawings, layouts, specifications, datasheets, approved vendor list etc.CONTRACTOR shall be responsible for selection and supply of exactly suitable material as per the layouts, datasheets, specifications and actual site conditions for safe and standard installation. Rate shall include mounting of fixture along with its accessories like chokes, condensers, reflectors, control gear boxes and lamps, checking of internal wiring. All consumables such as ball and socket, hanger rods, lugs, glands, GI chains, hardwares, anchor-fasteners etc. are in the scope of the contractor. Note that these quantities are approximate and payment shall be made for actual equipment / materials installed by the Contractor as part of permanent installation based on Issued for Construction drawings. Any balance material supplied by Contractor but not permanently installed at site shall be taken back by Contractor and shall not be billed to Purchaser and/or Consultant. Contractor shall consider all associated work as indicated in respective installation standard drawings, scope of work and as per the directions of the Engineer-in-charge. Recess mounted LED light fixture with LED lamp (type LCTLSN-18 -CDL of CG make or equivalent).Detail specifications as given in tender document. 178 SITC Suspended linear LED 11193- Each 9500 Yes DETAIL SPECIFICATION AS GIVEN IN TENDER DOCUMENT Supply, Installation, testing & commissioning of point wiring as per details in construction drawing & specification includes PVC conduits, falt batten etc as per approved drawings, layouts, specifications, datasheets, approved vendor list etc.CONTRACTOR shall be responsible for selection and supply of exactly suitable material as per the layouts, datasheets, specifications and actual site conditions for safe and standard installation. Rate shall include mounting of fixture along with its accessories like chokes, condensers, reflectors, control gear boxes and lamps, checking of internal wiring. All consumables such as ball and socket, hanger rods, lugs, glands, GI chains, hardwares, anchor-fasteners etc. are in the scope of the contractor. Note that these quantities are approximate and payment shall be made for actual equipment / materials installed by the Contractor as part of permanent installation based on Issued for Construction drawings. Any balance material supplied by Contractor but not permanently installed at site shall be taken back by Contractor and shall not be billed to Purchaser and/or Consultant. Contractor shall consider all associated work as indicated in respective installation standard drawings, scope of work and as per the directions of the Engineer-in-charge. Suspended Linear LED light fixture with LED lamp (type LCLP-36 -TL of CG make or equivalent) with suitable mounting arrangement over raceways/ metsec channel arrangement.Detail specifications as given in tender document. 179 SITC 'Recessed Emnergency 11193- Each 7500 Yes LED DETAIL SPECIFICATION AS GIVEN IN TENDER DOCUMENT Supply, Installation, testing & commissioning of point wiring as per details in construction drawing & specification includes PVC conduits, falt batten etc as per approved drawings, layouts, specifications, datasheets, approved vendor list etc.CONTRACTOR shall be responsible for selection and supply of exactly suitable material as per the layouts, datasheets, specifications and actual site conditions for safe and standard installation. Rate shall include mounting of fixture along with its accessories like chokes, condensers, reflectors, control gear boxes and lamps, checking of internal wiring. All consumables such as ball and socket, hanger rods, lugs, glands, GI chains, hardwares, anchor-fasteners etc. are in the scope of the contractor. Note that these quantities are approximate and payment shall be made for actual equipment / materials installed by the Contractor as part of permanent installation based on Issued for Construction drawings. Any balance material supplied by Contractor but not permanently installed at site shall be taken back by Contractor and shall not be billed to Purchaser and/or Consultant. Contractor shall consider all associated work as indicated in respective installation standard drawings, scope of work and as per the directions of the Engineer-in-charge. LED Recessed Emergency lights of 18 watt with 3 hours battery back up for emergency operation (type - PEL 18W LED NM RDL CR or Equivalent)Detail specifications as given in tender document. 180 SITC Emergency EXIT LED 11193- Each 12000 Yes DETAIL SPECIFICATION AS GIVEN IN TENDER DOCUMENT Supply, Installation, testing & commissioning of point wiring as per details in construction drawing & specification includes PVC conduits, falt batten etc as per approved drawings, layouts, specifications, datasheets, approved vendor list etc.CONTRACTOR shall be responsible for selection and supply of exactly suitable material as per the layouts, datasheets, specifications and actual site conditions for safe and standard installation. Rate shall include mounting of fixture along with its accessories like chokes, condensers, reflectors, control gear boxes and lamps, checking of internal wiring. All consumables such as ball and socket, hanger rods, lugs, glands, GI chains, hardwares, anchor-fasteners etc. are in the scope of the contractor. Note that these quantities are approximate and payment shall be made for actual equipment / materials installed by the Contractor as part of permanent installation based on Issued for Construction drawings. Any balance material supplied by Contractor but not permanently installed at site shall be taken back by Contractor and shall not be billed to Purchaser and/or Consultant. Contractor shall consider all associated work as indicated in respective installation standard drawings, scope of work and as per the directions of the Engineer-in-charge. Emergency LED Exit Light For Emergency Evacuation and Fire Purpose with 3 hours battery backup (type - PEL 111 E/NM/V PEL or Equivalent)Detail specifications as given in tender document. 181 SITC Exhaut Fan 11193- Each 6000 995463 Yes SUPPLY OF HD EXHAUST FAN 12 INCH,[APPROVED MAKE] ALONG WITH LOUVERS. INSTALLATION INVOLVES WALL BREAKING AND PLASTERING ALONG WITH FITTING OF LOUVERS FROM THE OUTSIDE Supply, Installation, testing & commissioning of point wiring as per details in construction drawing & specification includes PVC conduits, falt batten etc as per approved drawings, layouts, specifications, datasheets, approved vendor list etc.CONTRACTOR shall be responsible for selection and supply of exactly suitable material as per the layouts, datasheets, specifications and actual site conditions for safe and standard installation. Rate shall include mounting of fixture along with its accessories like chokes, condensers, reflectors, control gear boxes and lamps, checking of internal wiring. All consumables such as ball and socket, hanger rods, lugs, glands, GI chains, hardwares, anchor-fasteners etc. are in the scope of the contractor. Note that these quantities are approximate and payment shall be made for actual equipment / materials installed by the Contractor as part of permanent installation based on Issued for Construction drawings. Any balance material supplied by Contractor but not permanently installed at site shall be taken back by Contractor and shall not be billed to Purchaser and/or Consultant. Contractor shall consider all associated work as indicated in respective installation standard drawings, scope of work and as per the directions of the Engineer-in-charge. Exhaust fan (Industrial type 300/450 mm) with louvers,950 rpm,55watt.Detail specifications as given in tender document. 182 SITC Socket Outlet 5/15Amp 11193- Each 2500 995461 Yes INSTALLATION OF SOCKET OUTLET (5/15 AMP COMBINATION). Supply, Installation, testing & commissioning of point wiring as per details in construction drawing & specification includes PVC conduits, falt batten etc as per approved drawings, layouts, specifications, datasheets, approved vendor list etc.CONTRACTOR shall be responsible for selection and supply of exactly suitable material as per the layouts, datasheets, specifications and actual site conditions for safe and standard installation. Rate shall include mounting of fixture along with its accessories like chokes, condensers, reflectors, control gear boxes and lamps, checking of internal wiring. All consumables such as ball and socket, hanger rods, lugs, glands, GI chains, hardwares, anchor-fasteners etc. are in the scope of the contractor. Note that these quantities are approximate and payment shall be made for actual equipment / materials installed by the Contractor as part of permanent installation based on Issued for Construction drawings. Any balance material supplied by Contractor but not permanently installed at site shall be taken back by Contractor and shall not be billed to Purchaser and/or Consultant. Contractor shall consider all associated work as indicated in respective installation standard drawings, scope of work and as per the directions of the Engineer-in-charge. Socket outlet (5/15 Amp combination) Detail specifications as given in tender document. 183 SITC 20Amps industrial socket 11193- Each 3000 995461 Yes SUPPLYING AND FIXING 20 AMP. 240 VOLT, SPN INDUSTRIAL TYPE SOCKET OUTLET, WITH 2 POLE AND EARTH, METAL ENCLOSED PLUG TOP ALONG WITH 20 AMPS "C" CURVE, SP, MCB, IN SHEET STEEL ENCLOSURE, ON SURFACE OR IN RECESS, WITH CHAINED METAL COVER FOR THE SOCKET OUTLET AND COMPLETE WITH CONNECTIONS, TESTING AND COMMISSIONING ETC. AS REQUIRED. Supply, Installation, testing & commissioning of point wiring as per details in construction drawing & specification includes PVC conduits, falt batten etc as per approved drawings, layouts, specifications, datasheets, approved vendor list etc.CONTRACTOR shall be responsible for selection and supply of exactly suitable material as per the layouts, datasheets, specifications and actual site conditions for safe and standard installation. Rate shall include mounting of fixture along with its accessories like chokes, condensers, reflectors, control gear boxes and lamps, checking of internal wiring. All consumables such as ball and socket, hanger rods, lugs, glands, GI chains, hardwares, anchor-fasteners etc. are in the scope of the contractor. Note that these quantities are approximate and payment shall be made for actual equipment / materials installed by the Contractor as part of permanent installation based on Issued for Construction drawings. Any balance material supplied by Contractor but not permanently installed at site shall be taken back by Contractor and shall not be billed to Purchaser and/or Consultant. Contractor shall consider all associated work as indicated in respective installation standard drawings, scope of work and as per the directions of the Engineer-in-charge. 20 Amp sheet steel enclosed industrial type socket with 20 Amp DP MCB for AC.Detail specifications as given in tender document. 184 SITC Lighting switchboard unit 11193- Each 2000 Yes DETAIL SPECIFICATION AS GIVEN IN TENDER DOCUMENT Supply, Installation, testing & commissioning of point wiring as per details in construction drawing & specification includes PVC conduits, falt batten etc as per approved drawings, layouts, specifications, datasheets, approved vendor list etc.CONTRACTOR shall be responsible for selection and supply of exactly suitable material as per the layouts, datasheets, specifications and actual site conditions for safe and standard installation. Rate shall include mounting of fixture along with its accessories like chokes, condensers, reflectors, control gear boxes and lamps, checking of internal wiring. All consumables such as ball and socket, hanger rods, lugs, glands, GI chains, hardwares, anchor-fasteners etc. are in the scope of the contractor. Note that these quantities are approximate and payment shall be made for actual equipment / materials installed by the Contractor as part of permanent installation based on Issued for Construction drawings. Any balance material supplied by Contractor but not permanently installed at site shall be taken back by Contractor and shall not be billed to Purchaser and/or Consultant. Contractor shall consider all associated work as indicated in respective installation standard drawings, scope of work and as per the directions of the Engineer-in-charge. Lighting Switchboard unit - pre wired , flush mounted with thick bakelite cover with conduit knock outs on the sides & having 240V, 5A switches 8 Nos. & 5A Switch Sockets 2 No. or as per requirement.Detail specifications as given in tender document. 185 SITC Ceiling fan with regulato 11193- Each 4000 Yes SUPPLY AND INSTALLATION OF CEILING FAN WITH ELECTRONIC REGULATOR (ENERGY EFFICIENT, 230 V, 50 HZ, MIN 270 M3/MIN, MAXIMUM 50 W, 1400 MM SWEEP). Supply, Installation, testing & commissioning of point wiring as per details in construction drawing & specification includes PVC conduits, falt batten etc as per approved drawings, layouts, specifications, datasheets, approved vendor list etc.CONTRACTOR shall be responsible for selection and supply of exactly suitable material as per the layouts, datasheets, specifications and actual site conditions for safe and standard installation. Rate shall include mounting of fixture along with its accessories like chokes, condensers, reflectors, control gear boxes and lamps, checking of internal wiring. All consumables such as ball and socket, hanger rods, lugs, glands, GI chains, hardwares, anchor-fasteners etc. are in the scope of the contractor. Note that these quantities are approximate and payment shall be made for actual equipment / materials installed by the Contractor as part of permanent installation based on Issued for Construction drawings. Any balance material supplied by Contractor but not permanently installed at site shall be taken back by Contractor and shall not be billed to Purchaser and/or Consultant. Contractor shall consider all associated work as indicated in respective installation standard drawings, scope of work and as per the directions of the Engineer-in-charge. Ceiling fan with electronic regulator ( Energy efficent, 50W, 1200 mm sweep)Detail specifications as given in tender document.

SITC Wall mounted electric fan — TYPE:CEILING FAN; MANUFACTURER:N/A; MODEL:N/A; SIZE:400 MM; CAPACITY:N/A; ADDITIONAL INFORMATION:WALL Supply, Installation, testing & commissioning of point wiring as per details in construction drawing & specification includes PVC conduits, falt batten etc as per approved drawings, layouts, specifications, datasheets, approved vendor list etc.CONTRACTOR shall be responsible for selection and supply of exactly suitable material as per the layouts, datasheets, specifications and actual site conditions for safe and standard installation. Rate shall include mounting of fixture along with its accessories like chokes, condensers, reflectors, control gear boxes and lamps, checking of internal wiring. All consumables such as ball and socket, hanger rods, lugs, glands, GI chains, hardwares, anchor-fasteners etc. are in the scope of the contractor. Note that these quantities are approximate and payment shall be made for actual equipment / materials installed by the Contractor as part of permanent installation based on Issued for Construction drawings. Any balance material supplied by Contractor but not permanently installed at site shall be taken back by Contractor and shall not be billed to Purchaser and/or Consultant. Contractor shall consider all associated work as indicated in respective installation standard drawings, scope of work and as per the directions of the Engineer-in-charge. Wall mounted fan with electronic regulator ( Energy efficent, 50W, 400 mm sweep, 1300 rpm) etc complete in all respect for wall mountingDetail specifications as given in tender document. 187 SITC 1.8T 5 star inveter AC 11193- Each 65000 Yes DETAIL SPECIFICATION AS GIVEN IN TENDER DOCUMENT Supply, Installation, testing & commissioning of point wiring as per details in construction drawing & specification includes PVC conduits, falt batten etc as per approved drawings, layouts, specifications, datasheets, approved vendor list etc.CONTRACTOR shall be responsible for selection and supply of exactly suitable material as per the layouts, datasheets, specifications and actual site conditions for safe and standard installation. Rate shall include mounting of fixture along with its accessories like chokes, condensers, reflectors, control gear boxes and lamps, checking of internal wiring. All consumables such as ball and socket, hanger rods, lugs, glands, GI chains, hardwares, anchor-fasteners etc. are in the scope of the contractor. Note that these quantities are approximate and payment shall be made for actual equipment / materials installed by the Contractor as part of permanent installation based on Issued for Construction drawings. Any balance material supplied by Contractor but not permanently installed at site shall be taken back by Contractor and shall not be billed to Purchaser and/or Consultant. Contractor shall consider all associated work as indicated in respective installation standard drawings, scope of work and as per the directions of the Engineer-in-charge. Supply, Installation, testing and commissioning of latest model (UL/CE/BEE certified/ Equivalent 5 Star inverter AC) 1.8 T split AC complete with remote, 5 KVA stablizer, 12 Hr timer, MS Stand for outdoor unit etc. Detail specifications as given in tender document. 188 1.5 sq.mm Copper conductor 11193- Running Meter 45 Yes PVC DETAIL SPECIFICATION AS GIVEN IN TENDER DOCUMENT Supply, Installation, testing & commissioning of point wiring as per details in construction drawing & specification includes PVC conduits, falt batten etc as per approved drawings, layouts, specifications, datasheets, approved vendor list etc.CONTRACTOR shall be responsible for selection and supply of exactly suitable material as per the layouts, datasheets, specifications and actual site conditions for safe and standard installation. Rate shall include mounting of fixture along with its accessories like chokes, condensers, reflectors, control gear boxes and lamps, checking of internal wiring. All consumables such as ball and socket, hanger rods, lugs, glands, GI chains, hardwares, anchor-fasteners etc. are in the scope of the contractor. Note that these quantities are approximate and payment shall be made for actual equipment / materials installed by the Contractor as part of permanent installation based on Issued for Construction drawings. Any balance material supplied by Contractor but not permanently installed at site shall be taken back by Contractor and shall not be billed to Purchaser and/or Consultant. Contractor shall consider all associated work as indicated in respective installation standard drawings, scope of work and as per the directions of the Engineer-in-charge. 1.5 sq.mm Copper conductor PVC (Type-C Insulated, confirming to IS 5831, with FRLS properties)wire for Point wiringDetail specifications as given in tender document. 189 2.5 sq.mm Copper conductor 11193- Running Meter 70 Yes PVC DETAIL SPECIFICATION AS GIVEN IN TENDER DOCUMENT Supply, Installation, testing & commissioning of point wiring as per details in construction drawing & specification includes PVC conduits, falt batten etc as per approved drawings, layouts, specifications, datasheets, approved vendor list etc.CONTRACTOR shall be responsible for selection and supply of exactly suitable material as per the layouts, datasheets, specifications and actual site conditions for safe and standard installation. Rate shall include mounting of fixture along with its accessories like chokes, condensers, reflectors, control gear boxes and lamps, checking of internal wiring. All consumables such as ball and socket, hanger rods, lugs, glands, GI chains, hardwares, anchor-fasteners etc. are in the scope of the contractor. Note that these quantities are approximate and payment shall be made for actual equipment / materials installed by the Contractor as part of permanent installation based on Issued for Construction drawings. Any balance material supplied by Contractor but not permanently installed at site shall be taken back by Contractor and shall not be billed to Purchaser and/or Consultant. Contractor shall consider all associated work as indicated in respective installation standard drawings, scope of work and as per the directions of the Engineer-in-charge. 2.5 sq.mm Copper conductor PVC (Type-C Insulated, confirming to IS 5831, with FRLS properties) wire for Point wiring Detail specifications as given in tender document. 190 4.0 sq.mm Copper conductor 11193- Running Meter 120 Yes PVC DETAIL SPECIFICATION AS GIVEN IN TENDER DOCUMENT Supply, Installation, testing & commissioning of point wiring as per details in construction drawing & specification includes PVC conduits, falt batten etc as per approved drawings, layouts, specifications, datasheets, approved vendor list etc.CONTRACTOR shall be responsible for selection and supply of exactly suitable material as per the layouts, datasheets, specifications and actual site conditions for safe and standard installation. Rate shall include mounting of fixture along with its accessories like chokes, condensers, reflectors, control gear boxes and lamps, checking of internal wiring. All consumables such as ball and socket, hanger rods, lugs, glands, GI chains, hardwares, anchor-fasteners etc. are in the scope of the contractor. Note that these quantities are approximate and payment shall be made for actual equipment / materials installed by the Contractor as part of permanent installation based on Issued for Construction drawings. Any balance material supplied by Contractor but not permanently installed at site shall be taken back by Contractor and shall not be billed to Purchaser and/or Consultant. Contractor shall consider all associated work as indicated in respective installation standard drawings, scope of work and as per the directions of the Engineer-in-charge. 4.0 sq.mm Copper conductor PVC I(Type-C Insulated, confirming to IS 5831, with FRLS properties) wire for 15A Socket & A/C socketDetail specifications as given in tender document. 191 NFP flood LED 72 W 11193- Each 20000 Yes DETAIL SPECIFICATION AS GIVEN IN TENDER DOCUMENT Supply, Installation, testing & commissioning of point wiring as per details in construction drawing & specification includes PVC conduits, falt batten etc as per approved drawings, layouts, specifications, datasheets, approved vendor list etc.CONTRACTOR shall be responsible for selection and supply of exactly suitable material as per the layouts, datasheets, specifications and actual site conditions for safe and standard installation. Rate shall include mounting of fixture along with its accessories like chokes, condensers, reflectors, control gear boxes and lamps, checking of internal wiring. All consumables such as ball and socket, hanger rods, lugs, glands, GI chains, hardwares, anchor-fasteners etc. are in the scope of the contractor. Note that these quantities are approximate and payment shall be made for actual equipment / materials installed by the Contractor as part of permanent installation based on Issued for Construction drawings. Any balance material supplied by Contractor but not permanently installed at site shall be taken back by Contractor and shall not be billed to Purchaser and/or Consultant. Contractor shall consider all associated work as indicated in respective installation standard drawings, scope of work and as per the directions of the Engineer-in-charge. Non flame proof Integral flood lighting fixture (for 72W LED) on building/ structure/pole, lighting fixture type : LSFN-72-CDL of M/s CG make or equivalentDetail specifications as given in tender document. 192 SITC Telephone sockets 11193- Each 2200 Yes DETAIL SPECIFICATION AS GIVEN IN TENDER DOCUMENT Supply, Installation, testing and commisioning of telephone sockets (Piano reed Type) in recess PVC conduit including PVC conduit,telephone socket,cable,accessories etc as required.Detail specifications as given in tender document. 193 SITC LAN sockets 11193- Each 2500 Yes DETAIL SPECIFICATION AS GIVEN IN TENDER DOCUMENT Supply, Installation, testing and commisisoning of LAN sockets (Piano reed Type) in recess PVC conduit including PVC conduit,telephone socket,cable,accessories etc as required.Detail specifications as given in tender document. 194 Supply 2 pair jelly filled arm 11193- Running Meter 150 Yes DETAIL SPECIFICATION AS GIVEN IN TENDER DOCUMENT Supply of 2 pairs, jelly filled/aerial self supporting armoured Telephone Cable, including accessories etc as required.Detail specifications as given in tender document. 195 Supply of UTP cable (CAT 6), 11193- Running Meter 180 Yes DETAIL SPECIFICATION AS GIVEN IN TENDER DOCUMENT Supply of UTP cable (CAT 6), Detail specifications as given in tender document. 196 Main Distribution Frame - 20 p 11193- Each 6500 Yes DETAIL SPECIFICATION AS GIVEN IN TENDER DOCUMENT Main Distribution Frame - 20 pair.Detail specifications as given in tender document. 197 LAN switch with single incomer 11193- Each 8000 Yes DETAIL SPECIFICATION AS GIVEN IN TENDER DOCUMENT Managed LAN switch with single incomer and 8 nos out going port complete in all respect.Detail specifications as given in tender document. 198 SITC 5KVA inverter with SMF VR 11193- Each 100000 Yes SUPPLY OF SINGLE PHASE INVERTER AS PER SCOPE OF JOB AND TERMS & CONDITIONS MENTIONED IN THE TENDER Supply, Installation, Testing and Commissioning of 5KVA Inverter along with SMF VRLA Batteries for 12Hrs backup including battery stand, cover, internal cabling etc .Detail specifications as given in tender document. 199 Supply and laying GI pipe 50mm 11193- Running Meter 425 Yes DETAIL SPECIFICATION AS GIVEN IN TENDER DOCUMENT Supply and laying of following sizes of class 'B' G.I.Pipe in required length fixed on steel, concrete or similar sructure, laid in trenches, ready to be buried in concrete including cutting, threading, bending and similar works, supply of clamps, small iron structures, spacers and installation of seats, plugs, bushings etc. small civil works, including all labour and materials complete as per approved drawings and directions of Engineer-In-Charge.50 mm NBDetail specifications as given in tender document. 200 Supply and laying GI pipe 80mm 11193- Running Meter 525 Yes DETAIL SPECIFICATION AS GIVEN IN TENDER DOCUMENT Supply and laying of following sizes of class 'B' G.I.Pipe in required length fixed on steel, concrete or similar sructure, laid in trenches, ready to be buried in concrete including cutting, threading, bending and similar works, supply of clamps, small iron structures, spacers and installation of seats, plugs, bushings etc. small civil works, including all labour and materials complete as per approved drawings and directions of Engineer-In-Charge.80 mm NBDetail specifications as given in tender document. 201 Supply and laying GI pipe 100m 11193- Running Meter 650 Yes DETAIL SPECIFICATION AS GIVEN IN TENDER DOCUMENT Supply and laying of following sizes of class 'B' G.I.Pipe in required length fixed on steel, concrete or similar sructure, laid in trenches, ready to be buried in concrete including cutting, threading, bending and similar works, supply of clamps, small iron structures, spacers and installation of seats, plugs, bushings etc. small civil works, including all labour and materials complete as per approved drawings and directions of Engineer-In-Charge.100 mm NBDetail specifications as given in tender document. 202 Supply, inst, erection of cabl 11193- Meters 565 Yes SUPPLY AND INSTALLATION OF FOLLOWING SIZES OF PERFORATED GI CABLE TRAYS OF 2MM THICKNESS AND 50MM HIGH FOR SUPPORTING CABLES (PERFORATION NOT MORE THAN 17.5%), INCLUDING BENDS, TEES & REDUCERS AND INCLUDING ALL LABOUR AND MATERIALS, AS PER APPROVED DRAWINGS, SPECIFICATIONS OF THIS TENDER AND DIRECTIONS OF ENGINEER-IN- CHARGE. TRAY SIZE 75 MM WIDTH GI CABLE TRAY Supply, Installation, Erection of following Hot Dip Galvanized Ladder/Perforated Type cable trays (as per EN ISO 1461) including bends, tee, crosses,horizontal and vertical splices etc. as required including supply of all G.I hardwares, all labour and material as required as per standard drawings, specification and direction of Engineer-in-chargePerforated type, made from 50mm height and 2.5 mm thick sheet steel & galvanized (86 microns) of following sizes.75mm wideDetail specifications as given in tender document. 203 Supply, inst, erection of cabl 11193- Meters 700 995461 Yes SCOPE INVOLVES SUPPLY & LAYING OF 100 MM (W) X 50 MM (D) & 3MM (THKI) FRP CABLE TRAYS WITH ADEQUATE SUPPORTS. Supply, Installation, Erection of following Hot Dip Galvanized Ladder/Perforated Type cable trays (as per EN ISO 1461) including bends, tee, crosses,horizontal and vertical splices etc. as required including supply of all G.I hardwares, all labour and material as required as per standard drawings, specification and direction of Engineer-in-chargePerforated type, made from 50mm height and 2.5 mm thick sheet steel & galvanized (86 microns) of following sizes.100mm wideDetail specifications as given in tender document. 204 Supply, fab., ercection of MS 11193- Kilograms 150 Yes DETAIL SPECIFICATION AS GIVEN IN TENDER DOCUMENT Supply, Fabrication and errection of MS base frame support for switch gear and bracket for misc. electrical equipment, cable and cable tray support out of roled MS section,pipes,plates etc including welding, bolting, reveting, supply of necessary anchor bolts and grouting etc supply of paints applying one coat of anti rust primer two finish coats of approved synthetic enamel paints including bracking walls, floors etc for structure as required including supply of all GI hardware materials including all labour and materials complete as required and the direction of Engineer-in-charge.Detail specifications as given in tender document. 205 Steel structural works 11193- Metric Ton 125000 995455 Yes STRUCTURAL WORK (ALL SECTION OF STRUCTURE SUCH AS CHANNEL, BEAM, ANGLE, TEE, HAND RAILING PIPE, MS FLAT ETC. AS PER DESIGN AND DRAWING): SUPPLY, FABRICATION, WELDING, ERECTION, PAINTING, INSPECTION AND TESTING OF STEEL STRUCTURE AS PER APPROVED DRAWING AND DESIGN SUCH AS ROLLED SECTION, FLAT FOR CURB ANGLE, SPIRAL STAIRWAY, LANDING PLATFORMS, TOP PLATFORM, EARTHING CONNECTIONS CLEATS, WIND GIRDER SUPPORTS AND PAD PLATES, STIFFENERS/GUSSETS FOR WIND GIRDER, DEFLECTOR PLATE FOR WIND GIRDERS, STIFFENERS/CATWALKS FOR VALVE OPERATION PLATFORM, PIPE CROSSOVERS, VALVE OPERATING PLATFORMS, CURB ANGLES, CLEATS, SUPPORT STRUCTURAL FOR SPRINKLER SYSTEM AND FOAM SYSTEM, AND ALL ANGLES, GUSSET PLATES, WIND GIRDERS, STRUCTURAL STEEL FOR THE HAND RAIL OF THE SPIRAL STAIRWAY, MS SQUARE BARS OF 20 MM SIZE FOR POSTS OF THE HAND RAILING. ROOF TOP RAILING LIKE ANGLES, FLATS AND CONNECTING CLEAT ANGLES, ALL FLOATING ROOF STRUCTURAL, RIM AND FRAME ANGLES, PONTOON STIFFENING RAFTERS, SUPPLY AND BRACING OF BRASS STRIP OVER WHEELS OF ROLLING LADDER IN FLOATING ROOF TANKS ETC. SUPPLY, FABRICATION, WELDING AND ERECTION OF PIPE HAND RAILS FOR THE STAIRCASE MADE OUT OF 40 MM DIAMETER SCH 40 SEAMLESS PIPE CONFORMING TO ASTM A106 AND MS SQUARE BARS OF 20 MM SIZE WELDED TO THE TANK SHELL AND THE HAND RAILING ETC. SUPPLY OF ALL MATERIALS, CONSUMABLES, LABOUR, EQUIPMENT/MACHINERY, TOOLS AND TACKLES REQUIRED TO COMPLETE THE WORK AS PER DRAWINGS, SCOPE OF WORK AND INSTRUCTIONS OF HPCL ENGINEER-IN-CHARGE. PREPARATION OF ALL NECESSARY FABRICATION DRAWINGS INCLUDING BILL OF MATERIALS, SUPPLY OF STEEL CONSISTING OF PLATES, ROLLED STEEL JOISTS, CHANNELS, ANGLES, CHEQUERED PLATES, JOISTS, TRUSSES, TUBES ETC. AND ALSO RECTANGULAR/SQUARE HOLLOW STEEL SECTIONS, INSERT PLATES IN RCC SLEEPER/BRICKWORK, MS ROUND BAR, PIPELINE PEDESTAL STRUCTURE, ANCHOR BOLTS FOR STEEL STRUCTURE, SLEEVE PIPES, ANCHOR NUTS, WASHERS ETC. , CONFORMING TO IS: 2062/OTHER RELEVANT/APPLICABLE CODES. THE JOB INCLUDES STRAIGHTENING OF RAW STEEL IF REQUIRED, FABRICATION OF STEEL STRUCTURES AS PER DRAWINGS/PATTERN (INCLUDING PREPARATION OF SUPPLEMENTARY SKETCHES AND DETAILED BILL OF MATERIALS). RATE TO INCLUDE SUPPLY, FABRICATION, ERECTION AND WELDING, STRAIGHTENING, CUTTING TO REQUIRED LENGTH SUPPLY AND FIXING ALL NUTS AND BOLTS WASHERS WHEREVER REQUIRED FOR FOLLOWING ITEMS. SEPARATE MEASUREMENTS WILL NOT BE TAKEN FOR NUTS, BOLTS, WASHERS ETC. FOR PAYMENT PURPOSE. JOB ALSO TO INCLUDE CLEANING AND PREPARATION OF ALL STEEL SURFACES TO SWEDISH STANDARD SA 2 1/2 AS PER SWEDISH STANDARD: IS -05-5900/ISO-8501: LATEST EDITION WITH COPPER SLAG BLASTING. THE PRIMER PAINT SHALL BE ONE COAT OF 65 MICRON INORGANIC ZINC SILICATE FOLLOWED BY ONE COAT OF 100 MICRON HB MIO FOLLOWED BY TWO COATS OF ACRYLIC POLYURETHANE EACH OF 40 MICRONS. TOTAL THICKNESS OF PAINT SHALL BE MINIMUM 245 MICRONS DFT. THE SCOPE INCLUDES LOADING, TRANSPORTATION, UNLOADING AND DELIVERY AT ERECTION SITE OF ALL FABRICATED STRUCTURES, ERECTION, ALIGNMENT AND WELDING OF ALL STRUCTURES TRUE TO LINE, LEVEL, PLUMB AND DIMENSION, INCLUDING RECTIFICATION IF ANY, SPLICING, SITE ASSEMBLY ALL AS PER TECHNICAL SPECIFICATIONS AND DRAWINGS, TOUCH UP PAINTING, INCLUDING SUPPLY OF PAINT, WHERE PAINT IS DAMAGED ETC. COMPLETE AS PER INSTRUCTION OF ENGINEER-IN-CHARGE (ENGINEER-IN-CHARGE). NOTE: ALL THE STRUCTURE (AS DECIDED/INSTRUCTED BY ENGINEER-IN-CHARGE) OTHER THAN GRATINGS SHALL BE PAID UNDER THIS ITEM ONLY. MEASUREMENTS SHALL BE TAKEN ON ACTUAL WEIGHT BASIS ONLY. Design, detail engineering, preparation of design drawings (GA), fabrication drawings including bill of materials and getting approval of all design calculations & design drawings from consultant/client including supply and factory fabrication of steel structures such as columns, column bracings, sheeting posts, rafters, roof bracings, Crane Girders, Crane rails, buffer stopper, rail clips, auxiliary girder, monorail beams, crane maintenance platform, longitudinal struts, floor beams, handrails, roof purlins, side runners, sag rods, valve operating platforms, chequered plates, pipe trestle, pipe supports, stair cases, caged ladders, Anchor bolts (anchor Bolts supply by PEB vendor and fixing shall be carried out by civil contractor), including surface preparation by shot blasting confirming to Swedish Standard SA 2½ for painting, supply and application of 1st coat of Inorganic Zinc Silicate 75 microns DFT, 2nd coat of Intermediate of Epoxy High Build Micaceous Iron Oxide (MIO) 100 microns DFT, 3rd coat Finishing paint of Acrylic Polyurethane 40 microns DFT and 4th coat Finishing Paint of Acrylic Polyurethane 40 microns DFT (Total DFT=255 microns minimum) of approved colour. Finishing coat shall be applied one before erection and one coat after erection. Including transportation and delivery at site, unloading, storage and handling at site, site assembly and finally erection of structures at appropriate locations, alignment and bolting of all structures true to line, level, plumb and dimension. All works shall be completed as per Specification, scope and of works, drawings and as per direction of the Engineer-In-Charge.Note:The cost and weight of bolts and nuts (permanent and service), washers, electrodes, putty, gases, shims, packs, cost of straightening the raw materials, Built up section at any shape, cutting of flats from plates and providing splices, paints, tools, plants, testing of materials, etc and all other consumables as required for the work shall be deemed to be included in the quoted rates.Detail specifications as given in tender document. 206 Supply & erection of Zincalume 11193- Square Meters 1400 995468 Yes PREPARATION OF SHEETING DRAWINGS, BILL OF MATERIALS, GETTING APPROVAL OF ALL DESIGN CALCULATION & DRAWINGS FROM CLIENT/ DESIGN IN CHARGE OF PMC , INCLUDING SUPPLY OF 0.5MM TCT ZINCALUME HIGH TENSILE COLOUR COATED STEEL SHEETS (FY=550MPA) CONFORMING TO AS 1397:1993, HAVING TRAPEZOIDAL PROFILE WITH A COVER WIDTH OF 930-1020 MM AND 28-32 MM DEEP CREST AT PITCH OF 186- 250MMC/C WITH MINIMUM TWO RIBS AT CENTRE FOR STIFFENING. WITH ZINCALUME COATING 150GSM AND 45¿ SUPER POLYESTER COLORBOND XRW / SMP (SILICON MODIFIED POLYESTER) QUALITY PAINT SYSTEM OR EQUIVALENT WITH , ANTI-CAPILLARY GROOVE TO AVOID ANY SEEPAGE OF WATER THROUGH LATERAL OVER LAP, COMPATIBLE FLASHING, TRIMS, RIDGE PANEL, CURVED PANEL, CANOPY SOFFIT CLOSURE, CANOPY GUTTER, DOWN TAKE PIPE, CLOSERS FITTINGS AND FIXTURES, ACCESSORIES, SEALING TAPE ETC, TRANSPORTATION AND DELIVERY AT SITE, STORAGE AND HANDLING AT SITE, Preparation of sheeting drawings, bill of materials, getting approval from consultant, including Procument of 0.5mm TCT zincalume high tensile colour coated steel sheets (fy=550MPa) conforming to IS:15961 having trapezoidal profile with a cover width of 930-1020 mm and 28-32 mm deep crest at pitch of 186-250mmc/c with minimum two ribs at centre for stiffening. With zincalume coating 150gsm. The sheet shall have a total coating thickness of 35 micron,super durable polyester colorbond XRW quality paint system of 20 microns on exposed surface and 5 micron reverse polyester coat on back surface over 5 micron primer coat on both side surface as per IS:15965 .the paint system should have stable resin & inorganic pigments for paint durability and lead free for water harvesting The sheet shall have anti-capillary groove to avoid any seepage of water through lateral over lap, compatible flashing, Trims, ridge panel, curved panel, canopy soffit closure, canopy gutter, down take pipe, closers fittings and fixtures, accessories, sealing tape etc, including transportation and delivery at site, storage and handling at site, cutting and bending of sheets to required shapes and sizes and erecting them on roof and sides using self-drilling, self- tapping fasteners which shall be hot dip galvanized with Xylon coated with EPDM Seals conforming to AS: 3566 class 3 with colour coated to match sheet panel at proper position. Roof sheet shall be laid in combination of colours as per approved colours scheme. The sheet shall have brand marking of the manufacture giving product details on the back of the sheet at regular interval confirming genuinity of the material. Mode of measurement shall be total covering area of sheeting. Lapping of sheets, ridges and flashes shall not be paid extra. (Only net laid area to be measured for payment). All works shall be completed in all respect as per specification, scope and of works and as per direction of the Engineer-In- Charge.Detail specifications as given in tender document. 207 Supply, fabrication and erecti 11193- Metric Ton 140000 995455 Yes STRUCTURAL WORK (ALL SECTION OF STRUCTURE SUCH AS CHANNEL, BEAM, ANGLE, TEE, HAND RAILING PIPE, MS FLAT ETC. AS PER DESIGN AND DRAWING): SUPPLY, FABRICATION, WELDING, ERECTION, PAINTING, INSPECTION AND TESTING OF STEEL STRUCTURE AS PER APPROVED DRAWING AND DESIGN SUCH AS ROLLED SECTION, FLAT FOR CURB ANGLE, SPIRAL STAIRWAY, LANDING PLATFORMS, TOP PLATFORM, EARTHING CONNECTIONS CLEATS, WIND GIRDER SUPPORTS AND PAD PLATES, STIFFENERS/GUSSETS FOR WIND GIRDER, DEFLECTOR PLATE FOR WIND GIRDERS, STIFFENERS/CATWALKS FOR VALVE OPERATION PLATFORM, PIPE CROSSOVERS, VALVE OPERATING PLATFORMS, CURB ANGLES, CLEATS, SUPPORT STRUCTURAL FOR SPRINKLER SYSTEM AND FOAM SYSTEM, AND ALL ANGLES, GUSSET PLATES, WIND GIRDERS, STRUCTURAL STEEL FOR THE HAND RAIL OF THE SPIRAL STAIRWAY, MS SQUARE BARS OF 20 MM SIZE FOR POSTS OF THE HAND RAILING. ROOF TOP RAILING LIKE ANGLES, FLATS AND CONNECTING CLEAT ANGLES, ALL FLOATING ROOF STRUCTURAL, RIM AND FRAME ANGLES, PONTOON STIFFENING RAFTERS, SUPPLY AND BRACING OF BRASS STRIP OVER WHEELS OF ROLLING LADDER IN FLOATING ROOF TANKS ETC. SUPPLY, FABRICATION, WELDING AND ERECTION OF PIPE HAND RAILS FOR THE STAIRCASE MADE OUT OF 40 MM DIAMETER SCH 40 SEAMLESS PIPE CONFORMING TO ASTM A106 AND MS SQUARE BARS OF 20 MM SIZE WELDED TO THE TANK SHELL AND THE HAND RAILING ETC. SUPPLY OF ALL MATERIALS, CONSUMABLES, LABOUR, EQUIPMENT/MACHINERY, TOOLS AND TACKLES REQUIRED TO COMPLETE THE WORK AS PER DRAWINGS, SCOPE OF WORK AND INSTRUCTIONS OF HPCL ENGINEER-IN-CHARGE. PREPARATION OF ALL NECESSARY FABRICATION DRAWINGS INCLUDING BILL OF MATERIALS, SUPPLY OF STEEL CONSISTING OF PLATES, ROLLED STEEL JOISTS, CHANNELS, ANGLES, CHEQUERED PLATES, JOISTS, TRUSSES, TUBES ETC. AND ALSO RECTANGULAR/SQUARE HOLLOW STEEL SECTIONS, INSERT PLATES IN RCC SLEEPER/BRICKWORK, MS ROUND BAR, PIPELINE PEDESTAL STRUCTURE, ANCHOR BOLTS FOR STEEL STRUCTURE, SLEEVE PIPES, ANCHOR NUTS, WASHERS ETC. , CONFORMING TO IS: 2062/OTHER RELEVANT/APPLICABLE CODES. THE JOB INCLUDES STRAIGHTENING OF RAW STEEL IF REQUIRED, FABRICATION OF STEEL STRUCTURES AS PER DRAWINGS/PATTERN (INCLUDING PREPARATION OF SUPPLEMENTARY SKETCHES AND DETAILED BILL OF MATERIALS). RATE TO INCLUDE SUPPLY, FABRICATION, ERECTION AND WELDING, STRAIGHTENING, CUTTING TO REQUIRED LENGTH SUPPLY AND FIXING ALL NUTS AND BOLTS WASHERS WHEREVER REQUIRED FOR FOLLOWING ITEMS. SEPARATE MEASUREMENTS WILL NOT BE TAKEN FOR NUTS, BOLTS, WASHERS ETC. FOR PAYMENT PURPOSE. JOB ALSO TO INCLUDE CLEANING AND PREPARATION OF ALL STEEL SURFACES TO SWEDISH STANDARD SA 2 1/2 AS PER SWEDISH STANDARD: IS -05-5900/ISO-8501: LATEST EDITION WITH COPPER SLAG BLASTING. THE PRIMER PAINT SHALL BE ONE COAT OF 65 MICRON INORGANIC ZINC SILICATE FOLLOWED BY ONE COAT OF 100 MICRON HB MIO FOLLOWED BY TWO COATS OF ACRYLIC POLYURETHANE EACH OF 40 MICRONS. TOTAL THICKNESS OF PAINT SHALL BE MINIMUM 245 MICRONS DFT. THE SCOPE INCLUDES LOADING, TRANSPORTATION, UNLOADING AND DELIVERY AT ERECTION SITE OF ALL FABRICATED STRUCTURES, ERECTION, ALIGNMENT AND WELDING OF ALL STRUCTURES TRUE TO LINE, LEVEL, PLUMB AND DIMENSION, INCLUDING RECTIFICATION IF ANY, SPLICING, SITE ASSEMBLY ALL AS PER TECHNICAL SPECIFICATIONS AND DRAWINGS, TOUCH UP PAINTING, INCLUDING SUPPLY OF PAINT, WHERE PAINT IS DAMAGED ETC. COMPLETE AS PER INSTRUCTION OF ENGINEER-IN-CHARGE (ENGINEER-IN-CHARGE). NOTE: ALL THE STRUCTURE (AS DECIDED/INSTRUCTED BY ENGINEER-IN-CHARGE) OTHER THAN GRATINGS SHALL BE PAID UNDER THIS ITEM ONLY. MEASUREMENTS SHALL BE TAKEN ON ACTUAL WEIGHT BASIS ONLY. Supply, fabrication and fixing in position of steel entrance gate including supply of raw materials, transportation and delivery at site, unloading, storage and handling at site, site assembly and finally erection at appropriate locations of double and single leaf MS Gates shall be fabricated out of hollow pipes , MS flat and MS Sheet etc, including all fixtures like MS Pivot, locking arrangement, MS tower bolts, gate stopper, hold fast, MS wheel with ball bearing , MS tee bend to shape and embedded in the road surface for gate opening track, etc.including surface preparation by sand blasting confirming to Swedish Standard SA 2½ for painting, supply and application of 1st coat of Inorganic Zinc Silicate 75 microns DFT , 2nd coat of Intermediate of Epoxy High Build Micaceous Iron Oxide(MIO) 100 microns DFT, 3rd coat Finishing paint of Acrylic Polyurethane 40 microns DFT and 4th coat finishing Paint of Acrylic Polyurethane 40 microns DFT(Total DFT=255 microns minimum) of approved colour.The work shall be completed in all respect as per drawings and technical specification and direction of the Engineer-in-Charge.Detail specifications as given in tender document. 208 Supply & erection of polycarbo 11193- Square Meters 2500 995453 Yes Preparation of sheeting drawings, bill of materials, getting approval from consultant, including supply of 3 mm thick polycarbonate sheets as per IS:14443 of profile matching with roof and side sheeting as per item no ST-2 above with fittings and fixtures, water tight sealant, transportation and delivery at site unloading, storage and handling at site cutting and bending of sheets to required shapes and sizes, including erecting them on roof and sides at proper positions, all work shall be completed in all respect as per specification, scope and of work and drawings and as per direction of the Engineer-In-Charge (only net laid area to be measured for payment).Detail specifications as given in tender document. 209 Supply & Installation of Turbo 11193- Each 17500 995463 Yes Preparation of drawings, getting approval of drawings from consultant, including supply, installation of Turbo vent (roof ventilator) 600 mm diameter as per approved data sheet enclosed as Annexure S5, on roof including fixtures and fitting of the turbo vent on a 3mm FRP base with gel coating with profile matching of roof steel sheeting, including fittings and fixtures water tight sealant, including transportation and delivery at site, unloading, storage and handling at site, cutting to required shapes and sizes and erecting them on roof at proper position. All works shall be completed in all respect as per specification, scope, of works, tender drawings and as per direction of the Engineer-In-Charge.Detail specifications as given in tender document. 210 Design, manufacture, inst, tes 11193- Each 5000000 Yes DETAIL SPECIFICATION AS GIVEN IN TENDER DOCUMENT Double Girder EOT CraneDesign, Engineering, Manufacture, Assembly, Testing & Inspection at Manufacturer's Works, Painting at Manufacturer's Shop as well as at Site after Erection, Supply including Dismantling for Transportation, Packing, Loading and Transportation to Site, Insurance, Receipt, Unloading, Storage and Re-Conservation at Site, Erection, Testing & Commissioning including Performance Testing of Crane along with all electrics, slings set and other items as per TS, commissioning and standard accessories, spare parts for two years normal operation and maintenance spare ,tool box etc as per specification covered under this Technical Specification, Tender Drawings and Relevant Standards of Crane specified in enclosed TenderDGEOT Crane 10/3 Tons Capacity, 14 M Span, 7.5 M Height of Lift, 18 m Lt Travel Double Girder Electrically Operated EOT Crane for Hazardous Area Zone 2, Gas Group IIA & IIB and Temperature Class- T3 and explosive protection Ex 'd'.Detail specifications as given in tender document.