PROVISION OF CONCERTINA COIL FENCING NEAR SECURITY WALL OF FINOLEX LAND PROVISION OF PIGEON NET FOR BALCONIES AT CGRA AND PROVISION OF DOORS FOR BUILT IN CUPBOARD OF MI ROOM AT ICGAS RATNAGIRI

Amount

Excavation in post holes (or similar holes) each not exceeding 0.5 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in soft disintegrated rock complete all as specified and as directed.

Material and Labour for Machine cut laterite stone masonry exceeding 10 cm in width square rubble, regular coursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and directed.

Material and Labour for cement concrete (1:2.4) type B-1 using 20 mm graded stone aggregate as in lintels up to 1.50 m clear span, cills, steps, seismic and other similar bands, copings, kneelers, apex stones bed plates, bed blocks of hold fast etc. including necessary form work complete all as specified and directed.

Material and Labour for PCC (1:3:6) type C-2 using 40 mm graded stone aggregate as in foundation, filling and mass concrete all as specified and directed.

Supply and Fix Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc. flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, and similar work conforming to Fe-290 Grade E-165 all as specified and directed.

Material and Labour for 15 mm thick rendering (in two coats of 10 & 5 mm respectively) on stone masonry wall surfaces in CM 1:4 finished fair and even all as specified and as directed by Engineer in Charge

Supply & Fix razer type concertina fencing coil 9 SWG Stainless steel spring tensile wire of Ultimate Tensile Strength 145 to 150 N/Sqmm, Dia of coil when un stretched shall be 610mm having minimum of coil (GI Strip) 1.625 Kg/Rm, Stainless steel rozer ribbon type of size 0.50 mm thickness, 19mm wide before wrapping on central core wire fixed with 1.66mm thick stainless-steel clips (minimum 25 Nos/RM) and special nut and bolts to hold two coil together and extra rows parallel/wire of 10 gauge complete all as specified and directed

Supply & fix stainless steel razer wire with core wire dia 2.5 to 3 mm and with dual razer at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc complete all as specified and directed. Note: Each line of wire to be measured

Material and Labour for preparing newly untreated surfaces of steel and iron work, of any description and girth, not otherwise described, and treated with tar or coal tar black paint etc., complete all as specified and as directed by Engineer in Charge

Material & Labour for preparing new plastered surfaces of walls and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives 1.43 litre/10 Sqm over and including priming coat of exterior primer applied 0.90 litre/10 Sqm over new/prepared surfaces Note-primer and emulsion to be carried out through air less spray machine (Mechanical means) complete all as specified and directed by Engineer in charge

Taking down cement plaster any description on Laterite masonry or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed.

Material and Labour for rendering 15mm thick in two layers, 5mm thick using WPC 3% by weight of cement over 10 mm thick on fair faces of Laterite stone masonry or concrete surfaces with CM (1:4) finished even and smooth without using extra cement complete all as specified and directed. Note: WPC will be measured and paid separately

Supply only integral water proofing compound conforming to IS 2645-3 1975, IS-9103 all as specified and directed by Engineer in Charge.

Supply and Fix Anti-Bird Net UV-Stabilized HDPE Multi-Filament Net of 2.5 mm thickness/Dia with Installation Kit & Tying Ropes attached of white or coloured and of 25mm grid including fitting & fixtures, hassle free installation complete all as specified and as directed by Engineer in Charge

Supply and Fix for cupboard anti-fungal, moisture resistance, anti-borer, 100% water Proof, flame retardant in required sizes at site made out of 18mm thick 100% Solid WPC (Wood polymer composite sheet) Plain board of required size & provision of shutters made out of 18 mm thick 100% Solid WPC Plain board all required brackets SS screws etc., the panels shall be fabricated using adhesive and screws where ever required as per drawing and specification of any description and in any position, complete all as specified and as directed approved by Engineer-in-charge

Supply and fixing Wood polymer composite sheet (WPC) pre-laminated (one side decorative & other side balancing lamination sheet) density 600 Kg/m3, frame of width 150mm & 18mm thickness made out of extruded 18mm WPC sheet and joined with suitable Cement Solvent adhesive and screw, The frame shall be fixed to the wall using 75mm long SS Screws through the frame by using (WPC) Wood polymer composite fasteners, A minimum of 3 Nos. of screws to be provided for each vertical member & minimum 2 Nos. for horizontal member etc., complete all as specified and directed by Engineer in Charge

Supply and Fix of hydraulic hinges for cabin door shutter of mild steel bright finish or electrogalvanised, fixed with screw etc.; complete all as specified and directed by Engineer in Charge

Supply and Fix mild steel butt hinges 100mm long, medium weight cold rolled fixed with steel chowkhats etc., complete all as specified and directed.

Supply and Fix of mild steel single action helical hinges 150-200mm long, suitable for 1000-1250mm wide wooden door fixed with steel Chowkhats etc; complete all as specified and directed.

Supply and Fix of aluminium anodised handles 100 mm long fixed to windows complete all as specified and directed and directed.

Supply and Fix Modular lock grade-1 50mm, 02 lever as in modular cupboard and modern wardrobes complete all as specified and directed and directed.

Material and Labour for Brass handles, cast type, polished bright 150 mm suitable to modular cupboards long complete all as specified and directed and directed.

SHRI SAI ENTERPRISES (BID ID -3489833)

jkconstruction (BID ID -3489116)

Ideal Infrastructure and Consultants (BID ID -3488234)

SHRIKALP ENGINEERS AND CONTRACTORS (BID ID -3489753)

Nitish Nandkumar Bothale (BID ID -3486232)

m/s Pravin s Bhosale (BID ID -3489795)

Advait Enterprises (BID ID -3488219)