SPL REPAIR TO BLDG NOs P-95, P-96, P-97, P-100, P-882 AND P-885 IN THE AOR OF AGE B/R-II UNDER GE 864 EWS JOB NO W/SR BLDGS-23/BB CANTT/2025-26

Amount

Taking down frame with shutters (without taking off shutters from frame) n.exc 1.5 sq.m each all as specified and directed.

Taking down frame with shutters (without taking off shutters from frame) exc 1.5 sqm but n.exc 4 sqm each all as specified and directed.

S&F for 2nd class hard wood Plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints all as specified and directed.

M&L for 35mm thick 2nd class hard wood factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 Part I, kiln reasoned and chemically pressure treated all as specified and directed

S&F brass door magic eye as given specification material resin lens zinc alloy, top diameter: 31.2mm, bottom diameter approx. 24mm, pipe diameter approx. 16mm total length approx. 50mm, inner height approx. 36mm application 35 to 60mm thick viewing angle 200 degree of surrounding without opening the door unique design ultra clear view and superior finish, wide angle best in class lens for all round visibility the outsider cannot hide any ware, the back cover protects you from the outsider observing any movements inside easy to install with inbuilt screw over a wide range of door thickness from 35 mm to 60mm etc required at site complete all as specified and directed by Engr-in-charge

Cutting into existing manholes of internal dia of pipe 150mm for connecting new drains, making good to pipe and rendering, cutting out existing benching for and and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4, type B1 smooth finished , and reforming benching as required complete all as specified and directed

S&F 150mm bore of pipe reinforced concrete pieces class NP-2 laid jointed complete with collars including PCC 1:3:6, type C2 (using 40mm graded crushed stone aggregate) concrete bed to drain pipes 150mm including packing under, and haunching against the sides of pipes after they are laid and tested & Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and directed

Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections/ 3 truck and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ panelling, C.P. brass/ stainless steel screws, complete all as specified and directed

S&F of Powder coating of any colour (Thickness of powder coating not less than 50 micron ) anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as door stopper (1 No.). hinges type B-21 125mm long (3 Nos.) suitable handle (2 Nos.) for each shutter complete all as specified and as directed.

S&F Powder coating of any colour (Thickness of powder coating not less than 50 micron ) Anodised aluminium window and ventilator shutters fixed/sliding/side Hung type without sash bar, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, handle , locking arrangement, Necessary Butt Hinges, Tower Bolts etc complete all as specified and as directed by Engineer-in-charge.

S&F for ACP sheet 4mm thick in aluminium frame including necessary fittings, complete all as per specified and directed by Engineer-in-Charge.

S&F stainless steel butt hinges medium weight 100 mm size etc complete all as specified and directed.

S&F 150 mm size extruded aluminium handles fabricated type, anodised all as specified and directed.

S&F 150 mm size aluminium anodised barrel tower bolts of extruded sections all as specified and directed.

S & F 250mm aluminium alloy, anodised, sliding door bolt with hasp, staple & fixed clips of sheet, cast or extruded section & fixed bolts & sliding bolts of extruded section or cast aluminium alloy all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles etc complete all as specified and directed.

M&L for brickwork with old sized subclass 'B' bricks straight or curved on plan exc 6m mean radius and built in CM 1:6 etc complete all as specified and directed.

M&L for brickwork with old sized subclass 'B' bricks straight or curved on plan to any radius and built in CM 1:4 etc complete all as specified and directed.

Taking down cement plaster of any description, on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as directed.

M&L for rendering 15mm thick cement plaster in CM 1:6 on brick work or concrete surfaces finished even and fair without using extra cement & applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces including preparation complete all as specified and directed.

M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces including preparation complete all as specified and directed.

M&L for applying 1 to 2 mm thick white wall care putty to obtain smooth/ even finish surface using sand paper complete all as specified & directed

M&L for rendering 10mm thick cement plaster in CM 1:4 on brick work or concrete surfaces finished even and fair without using extra cement and preparation of new plastered surfaces of walls, apply two coats of oil bound distemper complete all specified and directed.

M&L for preparation of old plastered surfaces of walls, apply two coats of oil bound distemper complete all specified and directed.

S&F for Framed brackets of angles or tees with web and flanges, tubular pipes cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 & Dismantling wrought iron or mild steel work of any description.

M&L for cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in post/strut foundation complete all as specified and directed.

S&F in repair 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugated side lap fixed with L type or J type or cranked hook and washer in wall complete all as specified and directed.

M&L Vitrified Ceramic tiles light/dark shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm set and jointed in neat cement slurry and pointed in white or coloured cement to match with shade of tile laid over and including screed bed or bedding layer 20mm thick in CM(1:6), including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) etc complete all as specified and directed. Make : So many, Kajaria, Orient bell

M&L coloured non - skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6, including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) etc complete all specified and directed.

M&L coloured glazed ceramic tiles in vertical surface 450x 300x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick backing coat in CM 1:4, etc including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) etc complete all as specified and directed.

M&L for machine cut Kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry @3kg/Sqm mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete including 20 mm thick screed bed in cement mortar 1:4 & Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded in any mortar complete all as specified and directed by Engr-in-Charge.

Grinding with machine grinder of granite stone /kota topping with marble aggregate /marble Stone slab / Kota slab etc. as in old floor, wall, cooking platform, shelf etc & polishing complete all as specified and directed.

S&F steel window/ventilator factory made out of box type and shutter (double shutter) with sash bar made out of section using flash butt welding, complete including hinges, tower bolt, handle , grill 10 mm sq bar including two coat of synthetic enamel paint over one coat of red oxide primer, tarred hold fasts, PCC blocks, including plain/figured glass 3.0mm thick and wire mesh 0.36 mm nominal dia of wire and average width of aperture 1.18 mm all as shown on latest drg by competent auth/ CE 31 Zone/ as per drg in CA including taking down existing spoiled and unserviceable windows/ ventilators of any type (wooden/steel) complete all as specified and directed.

S&F sink with drainage board made of stainless steel 1 mm thick with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets of angle iron and connecting union to pipe over all size 915 mm x460 mm and bowl size 410mmx330mmx 160mm including 40mm Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm 45gms/40mm-60 gms) complete all as specified and directed.

S&F in repairs 32/40 mm dia bore PVC flexible pipe for sink complete all as specified.

M&L for 18 to 20 mm thick PVC prelaminated solid board with one side decorative choice laminate and other side balancing white including 3mm thick lipping and equal to thickness of board as in kitchen cabinet, cupboard etc fixed with screws to steel/timber frame work etc complete all as specified and directed.

S&F for Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and directed.

S&F 100 mm size extruded aluminium handles fabricated type, anodised all as specified and directed.

S&F hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws, Size of hasp and staple in mm 100 complete all as specified and directed.

S&F continuous (piano) hinges 30mm Width of flaps (when open) ,mild steel, bright finish or electro galvanised complete all as specified and directed

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws incl Dismantling of plain or corrugated steel sheeting, any gauge thickness , including nanital or similar pattern roof covering all as secured and directed

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws incl Dismantling of plain or corrugated steel sheeting, any gauge thickness , including nanital or similar pattern roof covering all as secured and directed

S&F Mild steel sheet eaves gutter of 1.25mm thick and min dia 150mm, galvanised class 3, half rounded with rounded edges complete as specified and directed

S&F MS angles(internal/ external) or nozzle piece outlets thickness 1.25mm and dia 150mm complete all as specified & directed

S&F MS drop ends / for spigot or socket ends or nozzles thickness 1.25mm and dia 150mm complete all as specified & directed

M&L 6mm thick Non Asbestos fibre cement /Pre Laminated self embossed texture designer board E-Board classic size 600x600mm, HPSC (High pressure steam cured) to be fixed or inserted to pre laminated GI frame work for seamless ceiling size 600mm x 600mm with main runner 38x24x0.9mm thick, cross tee 8.6x24x0.9mm and wall angle 19x19x0.9mm duly suspended with 6mm dia GI bar hangers 1200mm centre to centre both ways fixed with steel dash fasteners or from purlin from the roof with alignment clip incl Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

M&L for 15mm thick second class hardwood boarding as in ceiling planed one sided with butt joints and fixed with nails incl beading fillets cornices etc incl dismantling of old boarding complete all as specified

S&F for wooden laminated flooring in strips of size 120 cm long and 20 cm wide and 6-8 mm thick, fixed with PVC sheet and cushion including fillets/cornices, laid over 12mm thick BWR plywood incl Dismantling boarding, any description, fixed in any position with nails as in flooring, cupboard, drawers, showcase, cupboard shutters, wooden shelves, Partition, wooden flooring etc complete all as specified and directed.

M&L 2nd class hardwood 40mm thick boarding, as in flooring, plane one side with butt joints and fixed with nails incl Dismantling boarding, any description, fixed in any position with nails as in flooring, cupboard, drawers, showcase, cupboard shutters, wooden shelves, Partition, wooden flooring etc complete all as specified and directed.

M&L 2mm thick Linoleum, plain coloured, laid dry in floors including stretching, cutting and sealed down with an approved adhesive all as specified and directed.

Taking down iron gates of any description

M&L for Framed work such as grills, gratings, gates etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

S&F 110 mm dia PVC (SWR) pipes including necessary bends, fittings etc single socketed in any length with rubber ring joints fixed to walls & Taking down pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc. complete all as specified and directed.

S&F 75 mm dia PVC (SWR) pipes including necessary bends, fittings etc single socketed in any length with rubber ring joints fixed to walls Taking down pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc. complete all as specified and directed.

S&F PVC(SWR) branch piece single equal or unequal 110mm

S&F PVC(SWR) branch piece single equal or unequal 75mm

S&F PVC(SWR) bends any radius 110mm.

S&F PVC(SWR) bends any radius 75mm.

S&F PVC(SWR) 'S' trap any radius 110mm.

S&F PVC(SWR) vent cowl any radius 110mm.

M&L for cutting chases for concealed water tubing and making good to facing in cement mortar 1:3, cutting not exceeding 10cm girth all as specified and directed.

S&F 3 layer PPR Polypropylene random co polymer concealed pipes of 16mm outer dia SDR7.4 (PN16) UV stabilised and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PPR plain & brass threaded polypropylene random fittings fixed complete to walls, ceiling or in floors Taking up or down steel tubing and connections for 15mm dia complete all as specified and directed

S&F 3 layer PPR Polypropylene random co polymer concealed pipes of 20 mm outer dia SDR7.4 (PN16) UV stabilised and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PPR plain & brass threaded polypropylene random fittings fixed complete to walls, ceiling or in floors Taking up or down steel tubing and connections for 20mm dia complete all as specified and directed

M&L for 75mm thick PCC 1:3:6 type C-2 as in flooring complete all as specified and directed

S&F in repairs 15mm bore Brass CP wall mixer 3 in 1 for mixing hot & cold water screwed down for iron pipe and fixed with all connected fittings & fixtures complete all as specified and directed.

S&F in repairs 15mm bore Brass CP wash basin mixer swan type for mixing hot & cold water screwed down for iron pipe and fixed with all connected fittings & fixtures complete all as specified and directed.

S&F in repair PVC floor trap, with grating including jointing to waste pipe fixed in cement concrete 1:2:4, type B-1 of 110 mm dia etc complete all as specified and directed.

S&F in repair Vitreous China wash down water closet one piece pan (Pedestal pattern), white/colour (including all fitting all fixing bolts, flushing cistern, jet spray and flush pipe) complete all as specified and directed . Make : Cat part No - Lys-Wht-88515300UFSMUN or techno commercially equivalent make/model as approved by GE.

S&F PVC connections 15mm size with PTMT nuts of length 450mm etc complete all as specified and directed.

S&F in repairs 125mm brass chromium plated shower roses including fixing to steel pipe etc complete all as specified and directed.

S&F in repairs vitreous china pedestal wash basin of size 550x400mm (flat back or angle back type) including brackets cutting for and pinning in ends of brackets or erecting stand inclusive 32mm waste fittings, brass, chromium plated for basins, waste pipe etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and waster pipe etc complete all as specified and directed.

S&F in repairs Toilet paper holder, vitreous China, box type, white, fixed to walls with chromium plated (CP) brass screws complete all as specified and directed.

S&F in repairs Soap dish, vitreous China white, approximate size 160x 160x90mm fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F in health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed

S&F in corner glass shelf, three set type, of size 300x300mm (lower), 225x225mm (medium) & 150x150mm (upper) fixed with Cp brass screws, complete all as specified and directed. Make :- Jaquar Cat Part No CAN-CHR-1173N or techno commercially equivalent make/model as approved by GE.

S&F in repairs brass chromium plated tubular towel rail 20mm dia complete all as specified and directed.

S&F Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) all as specified and directed.

S&F in repairs 15mm bore Bib taps, chromium plated, fancy type, screwed down, screwed for iron pipe or for brass ferrule etc complete all as specified and directed.

S&F in repairs 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

S&F in repairs 15mm bore stop valves or angle valve, fancy type chromium plated, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions etc complete all as specified and directed.

S&F in repairs 15mm bore stop valves or angle valve, 2 in 1 type chromium plated, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions etc complete all as specified and directed.

S&F 500 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including brass float valve all as specified in SSR Part I including dismantling PVC water tanks exc 250 litres and not exc 500 litres capacity etc complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8, type D-2 (using 40mm graded stone aggregate) as in sub base over rammed earth complete all as specified and directed.

M&L for rubber moulded Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and no pigment laid over 50mm thick sand cushioning complete all as specified and directed.

M&L rubber moulded chequered cement concrete tiles 30cmx30cmx25mm thick with grey cement and pigments over 20mm thick screed bed or bedding layer in cement mortar 1:6 , set, jointed and pointed in neat cement slurry complete all as specified and directed

M&L for cement concrete 1:2:4, type B-1 (using 20mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, ramps not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.

M&L for endure anti-skid coloured tiles 300mmx300mmx9-10mm thick, laid in floors etc, set & jointed in neat cement mixed with pigment to match the colour of tiles over and including 20mm thick screed bed in cement mortar 1:6 including demolition/dismantling of old tiles complete all as specified and directed.

M&L for cement concrete 1:3:6, type C-1 (using 20mm graded stone aggregate) as in plinth protection and paving 75mm thick laid in slope finished even and fair without using extra cement including making joints every 2.5m and corner filled with bitumen 85/25 complete all as specified.

M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete including dismantling of old railing complete all as specified and directed.

M&L for RCC (nominal mix) 1:2:4, type B1 (using 20mm graded stone aggregate) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like including use and waste formwork & demolition of Concrete (reinforced) of any description and in any position not otherwise specifically provided for, complete all as specified & directed.

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for 20mm thick granite (of any type) in steps, jambs, pillars, window- cills, cooking platforms and like including rounding edges, laid over 15mm thick in cement mortar 1:6 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M&L wrought second class hard-wood in scantlings frame work incl Dismantling of timber scantlings 40 sq. cm and over in section, in any position unframed work complete all as specified.

M&L for Preparation of new wooden surfaces of any description not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for Preparation of old painted wooden surfaces of any description not other wise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for Preparation of old painted steel surfaces of any description not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

M&L for preparation of new or previously untreated steel surfaces of any description over 10 cm width or girth and apply two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F in repair 25mm dia stainless steel drapery curtain rods, heavy duty, fancy type with fancy brackets & domes (two in each door and window) complete all as specified and directed.

S&F 12mm thick toughened & figured glass as in hinged door, partitions, with AMC logo & 92 BH Logo stickers & incl necessary long solid fancy type handle, suitable hinges, locking system, hydraulic floor spring and all other necessary accessories as required making good the surface matching with the existing surface complete all as specified & directed.

M&L for taking down carefully existing old burnt out / unserviceable aluminium / copper point wiring system any type/ size and any description complete for light, fan,bell,socket, power points etc complete including removing the all type of fittings & fixture alongwith it connected fixing accessories such as all switches, sockets, ceiling roses, holder,regulators,bell etc complete and removing of all the old materials from the site for to taking as a schedule of credit complete all as specified and directed by EIC .

Dismantling unserviceable main switch/DBs with MCBs complete all as specified and directed.

Taking down carefully electric water heater of any capacity from site and repair it if required and refixing the same position including spray painting with entire satisfaction of Engr-in charge.

Taking down carefully exhaust fan of any capacity from site and repair it if required and refixing the same position with entire satisfaction of Engr-in charge.

Taking down carefully ceiling fan of any capacity from site and repair it if required and refixing the same position including cleaning & spray painting with entire satisfaction of complete all as specified and directed by Engr-in-Charge.

Taking down carefully electric energy meter from existing DB and refixing the same position with proper electric connection including electric meter box with distribution board with entire satisfaction of complete all as specified and directed by Engr-in-Charge.

M&L for single phasing point wiring system used as copper conductor wire for phase and neutral wiring system the wire made out of PVC insulated FRLS of 1100 volt grade with having multistranded copper conductor wire of size 1.5 Sq.mm (Nominal area) ISI marked drawn through wiring system surface on wall or concealed in wall with the help of heavy duty ISI mark PVC conduit pipe ISI mark in any lengthy wiring system and along with its all connected fittings accessories with proper colour cooding including providing of suitable sizes of modular boxes mounting of any type/size switches sockets, regulators etc and including using /drawing of one run of single wire 1.5 sqmm PVC insulated FRLS wire 1100 volt grade ISI marked with multistranded copper conductor wire used as a continuous earth wire for point wiring complete system and including making the good to all disturbed surfaces of wall/ceiling area of new wiring system and to match to it as per the existing surface of wall/ceiling etc one light point / fan point wiring system controlled by one way switch complete all as specified and directed by EIC.

All as per sr item No 111 here-in-before but one 5 Amps socket outlet point wiring system fixed on same board & controlled by one way switch

All as per sr item No 111 here-in-before but one 5 Amps socket outlet point wiring system fixed on independent board & controlled by one way switch

All as per sr item No 111 here-in-before but two 2 way point and controlled by one two way switch point wiring system.

All as per sr item No 111 here-in-before but one bell point wiring system fixed on board and controlled by one way bell switch complete

All as per ser item No 111 but using PVC insulated FRLS wire 1100 volt grade with multistranded copper conductor wire of size 2.5 Sq. mm (Nominal area) ISI Marked for power socket point on indenpent board point wiring system and also providing of 2.5 sqmm PVC insulated FRLS wire 1100 volt grade ISI Marked with multistranded copper conductor wire used as a continuous earth wire for power point wiring system complete .

S&F of modular type switch 5/6 Amps 220 Volts AC,one module complete all as specified and directed.

S&F of modular type socket of 5/6 Amps 220 Volts AC, 3/5 multi pin type with two modular complete all as specified and directed.

S&F of modular type switch of 15/16 Amps 220 Volts AC one module complete all as specified and directed.

S&F of modular type socket of 15/16 Amps 220 Volts AC 5/6 multi pin type with two modular complete all as specified and directed.

S&F of modular type bell push flush type single pole one way complete all as specified and directed.

S&F in renewal bell Ding Dong Type, 220 volt AC, Single Pole complete as per specified and directed

S&F in renewal one/two modular type step type electronic fan regulator with having hum free step alongwith speed control know complete all as specified and directed.

S&F ceiling rose three terminals type made out of polycarbonate , isolated body complete all as specified and directed.

S&F in renewal angular/batten type shape lamp holder with PVC/ Polycarbonate insulated body, alongwith brass adaptor and back plate for housing of bulb Including providing of LED bulb of capacity 7/9 watt warm/ white colour type complete all as specified and directed .

S&F in renewal LED tube light fitting of 1x 20W/22W 220V AC decorative box type with driver, holder including LED tube light with having energy efficient type use in both warm/white type colour complete including providing of suitable type flate flexible cable for electric connection from ceiling rose to fitting complete and including taking down of old fitting all as specified & directed

S&F in renewal LED mirror light fitting with high out put diffuser 2 feet long of 10 Watt 220 volt AC decorative type with driver holder and LED lamp with having energy efficient type use in both warm/white type colour complete light fitting set including providing of suitable type flate flexible cable for electric connection from ceiling rose to fitting and making electric connection and including taking down of old fitting all as specified and directed.

S&F star rated electric wall mounted fan 400 mm sweep of single phase 230 volt AC with having pull cord oscillating type single piece AS blade, three speed pull cord control complete with blade and guard framing support & connecting accessories and fixed/grouting on wall/roof with MS fastener, nut & bolt including providing flate flexible copper wire and making all electrical connection complete all as specified and directed.

S&F recessed/ceiling concealed mounted down lighter light fitting of round/Square flate shapes decorative type with high efficiency PMMA diffuser soft glare free light with drivers & LED luminaire of rating capacity in 15 Watt to 18 Watt 220 volt AC complete light fitting set all as per existing fitting type/ size of sample /model and make and including making in cutting or additional extra corner cutting work on existing hole of ceiling surface (when if required at site) for setting & fixing of new light fitting complete including making in additional extra corner cutting work on existing hole of ceiling surface (when if required at site) for setting & fixing of new light fitting complete and also providing of suitable type of flate flexible two/three core cable and making electric connection and including taking down of old fitting all as specified and directed.

S&F recessed / ceiling concealed mounted flat slim panel square shape with LED luminaire panel type fitting of size 600 mm x 600 mm of rating capacity in 35W/36/37 Watt 220 volt AC recessed type with high efficiency PMMA diffuser soft glare free light with driver, holder & LED lamps complete used for roof ceiling and required fitting use in both warm/white type colour complete set providing of suitable type of flat flexible two/three core cable and making electric connection complete set including making in additional extra corner cutting work on existing hole of ceiling surface (when if required at site) for setting & fixing of new light fitting complete all as specified and directed.

S&F in renewal of LED street light fitting for buildings of rated capacity 35 Watt 230 volt AC with having LED driver, lamp bracket with impact and corrosion resistant with lenses embedded including thermal management in multiple optics complete with IP 65/66 protection suitable for out door type made out of high pressure die cast hosing with heat resistant glass complete including providing of suitable size of dia GI pipe light grade bracket and it to match/setting the new fitting fixture hole attachment system of suitable bracket length upto 1.0 meter long and make to shape / bend of 120 degree angle including duly fixed alongwith existing pole /bldg wall/ roof with the help of 02 Nos of MS fixing clamp alongwith nut bolt and including providing of suitable type of flate flexible two/three core cable and making electric connection and including taking down of old fitting all as specified and directed.

S&F of sheet metal enclosure box duly powder coated & framing work with locking system and having double door fixing arrangement system suitable of size/type for vertical type distribution board vertical landline type of rating VTPN 4 way type 415 volt 3 phase AC supply holding system with IP protection rating IP 65/ 66 with ISI marked and having fitted neutral and earth link bus bar and mounting base channels and blanking plates suitable for holding of main MCCB as incomer and out going MCB complete system alongwith providing and mounting in side of DB box of 01 No of MCCB TPN 160 Amps with breaking rupting capacity 25 KA and having adjustable setting type and also providing of 12 Nos of MCB SP 63 Amps 10KA 'C' curve type of the same manufacture make as per of distribution board make complete set and including dully fixed surface on wall or concealed in wall and making all necessary electrical and also refixing the electric meter and its wiring connection including taking down of existing meter and DBs complete all as specified and directed by EIC.

S&F of sheet metal enclosure box duly powder coated & framing work with locking system and having double door fixing arrangement system suitable of size/type of distribution board of rating SPN 8 way type 220 volt AC supply system with IP protection rating IP 65/66 with ISI marked and having neutral and earth link bus bar and mounting base channel suitable for holding MCBs incomer and s outgoing system complete set and including dully fixed surface on wall or concealed in wall and making all necessary electrical and also refixing the electric meter and its wiring connection including taking down of existing meter and DBs complete all as specified and directed by EIC.

S&F of sheet metal enclosure box duly powder coated & framing work with locking system and having double door fixing arrangement system suitable of size/type of distribution board of rating SPN 4 way type 220 volt AC supply system with IP protection rating IP 65/66 with ISI marked and having neutral and earth link bus bar and mounting base channel suitable for holding MCBs incomer and s outgoing system complete set and including dully fixed surface on wall or concealed in wall and making all necessary electrical and also refixing the electric meter and its wiring connection including taking down of existing meter and DBs complete all as specified and directed by EIC.

S&F of MCB SPN 40 to 63 Amps with breaking capacity 10KA 'C' Curve series, 220 Volts, 50 Hz AC supply complete and also making suitable size / type of electric wiring connection complete including taking down of old MCB complete all as specified.

S&F of MCB SP 40 to 63 Amps with breaking capacity 10KA 'C' Curve series, 220 Volts, 50 Hz AC supply complete and also making suitable size / type of electric wiring connection complete including taking down of old MCB complete all as specified..

S&F of MCB SP 06 to 32 Amps with breaking capacity 10KA 'C' Curve series, 220 Volts, 50 Hz AC supply complete and also making suitable size / type of electric wiring connection complete including taking down of old MCB complete all as specified.

S&F star rated electric ceiling fan 1200 mm sweep min air delivery 210 CFM with service value 6.0 BEE norms 5 star rating with brushless direct current motor (BLDC) of single phase 230 volt AC alongwith blade, down rod, canopy, clamps with reel insulator, electronic regulator & accessories and MS fan hook fixed in ceiling/roof including providing flate flexible copper wire and making all electrical connection complete all as specified and directed.

S&F commission and testing of star rated of electric ventilation exhaust fan of size 250 mm sweep complete AC single phase 230 volt and made out of sturdy engineering plastic body complete with blade and louvers with shutter and also providing or making of suitable type/size of hole on wall out of any type of wall construction work for installation /fixing of exhaust fan after fan fixing work making good to all disturbed hole surface area of wall/ceiling and floor area of hole system and to match/dressing to it as per the existing surface on wall/floor/ceiling etc by cement plastering work complete all as specified and directed by EIC.

S&F of Sub main wiring system with two runs PVC insulated FRLS wire,1100 volt grade with multistranded copper conductor wire of size 2 Run of 6 Sqmm and 1 Run of 6 Sqmm (Nominal area) (ISI Marked) any type any length drawn through in heavy duty ISI mark PVC Casing capping / PVC conduit of suitable size along with its all fittings and connected accessories and duly fixed concealed on wall or surface on wall including taking down old unserviceable sub main wiring system complete and making good all disturbed surfaces match to the existing surface complete all as specified and directed . Note:- 3 runs of 6 sqmm wire and one run of PVC casing capping/conduit shall be measured as 1.0 RM.

S&F of sheet metal enclosure duly powder coated with single pole and neural enclosure with having a two pin and earth plug & top and mounting channel alongwith one 01 MCB SP 20 Amp and dully fixed surface on wall or concealed in wall and making all necessary electrical connection including taking down of existing DBs a as required at site or directed complete all as specified and directed

Supply, laying and testing of LT cable XLPE insulated screened, PVC bedded galvanized steel strip or wire armoured electric power cable (heavy duty) with aluminium conductor 1100 volt grade cross sectional area of size 35 sqmm 3.5 core including laid in trenches or fixing on poles or passing through pipes complete including taking out of old unserviceable cable any type any size complete all as specified and directed.

All as per ser item No 142 here-in-before but sizes 16 sqmm 4 core

All as per ser item No 142 here-in-before but sizes 10 sqmm 2 core

Excavation in trenches in soft/loose soil not exceeding 1.50 mtr wide and not exceeding 1.50 mtr in depth for laying of cables and getting out complete all as specified and directed by Engineer-in-Charge.

Returning, filling in, including spreading, levelling watering and well ramming inlayers not exceeding 25 cms thick each layer compete all as specified and directed by Engineer-in-Charge.

Removal of surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed by Engr-in-charge.

M&L for sand cushioning with a layer of sand 8cm thick before laying of cable and 15 cm thick after laying of cable in trenches complete all as specified.

Supply & laying old size sub class 'B' bricks laid flat in trenches over the cable with the length of brick perpendicular to the direction of cable length, adjacent/abutting each other complete all as specified and directed by Engineer-in-charge.

S&F galvanised steel tubing, light grade, ISI marked, for protection of under ground cable on pole/wall/under road including taking out old unserviceable pipe 40 mm bore complete all as specified and directed.

S&F in repair and installation electric chimney maximum suction 1200 Cubic meter/ h , rated power 223 W Net weight 12.3 kg Rated Voltage 230 V, Single phase AC ,50 HZ Dimension 59.8 cmX 48 cm x 49.4 cm including complete fixing accessories complete all as specified & directed.

S&F in repair testing commission LT feeder pillar box double door factory fabricated outdoor type front openable with locking arrangement compartmental type made out of 3.15 mm thick CRCA sheet apoxy painted and two coats of synthetic enamelled paint over a coat of red oxide of size 750mmx600mmx550mm complete mounted on and including MS angle iron frame made out of 40x6mm thick of suitable size painted with black synthetic enamel paint over a coat of red oxide primer embedded in PCC 1:2:4 type B-1 in foundation upto the depth of 300mm and 150mm above ground level incl. necessary excavation and earth work suitable for housing and including the following accessories :- (a) MCCB 250 Amps 4 pole 36 KA with overload & thermal release setting - 01 No (Incoming) (b) MCCB 160 Amps 4 pole 25 KA with overload & thermal release setting - 04 No (outgoing) (c) Copper bus bar 400 Amps of suitable size -01 Set. (d) LED type indicator lamp - 01 Set (03 Nos) (e) MCB SPN 40 Amp-02 Nos

S&F in renewal LED BOLLARD light fitting decorative type with drivers & LED luminaire of rating capacity in 10W 220 volt AC with new generation energy saving environmental friendly long life & having unique concept LED Bollard in IP 66 to ensure sustainable performance in all section and aesthetics which keeps the surrounding lively complete set including making and duly fixed on PCC block with holding attachment work for setting and also providing of suitable type of flat flexible two/three core cable and making electric connection complete all as specified and directed.

S&F in renewal LED BOLLARD light fitting decorative type with drivers & LED luminaire of rating capacity in 10W 220 volt AC with new generation energy saving environmental friendly long life & having unique concept LED Bollard in IP 66 to ensure sustainable performance in all section and aesthetics which keeps the surrounding lively complete set including making and duly fixed on PCC block with holding attachment work with proper PCC work for setting and also providing of suitable type of flat flexible two/three core cable and making electric connection complete all as specified & directed.

M&L for earthing work complete with galvanised steel earth plate electrode 60 Cm X 60 Cm X 6 mm thick buried directly in ground vertically to a depth not less than 2.25 mtr deep below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level and connected to galvanised earth lead wire 4.0 mm dia by means of bolts, check nuts and washers of galvanised steel and to be protected by GI pipe 15 mm bore light grade & connected to earth test point/main switch board or main control board and also providing charcoal or coke and salt in alternative layers, necessary excavation and earth work in any type of soil all as shown in Electrical Plate No 3 of SSR part -I. and also making arrangement of 20 mm dia bore galvanised iron pipe (medium grade) for water and making funnel, wire mesh, and also including provision of concrete pit cover framing work in PCC 1:2:4 type B-1 using 20mm graded of stone aggregate with XPM (weight not less than 4 Kg/Sqm) and outer frame work of angle iron 25x25x6mm with top concrete pit cover and handle for lifting of cover complete work all as specified and directed.

All as per ser item No 155 here-in-before but using galvanised Iron strip 25 x 4 mm as earthing lead

M/S RATHER CONSTRUCTION CO (BID ID -3484545)

M/S Vivek Gupta and Co (BID ID -3484625)

M/s Lal Enterprises (BID ID -3490553)