SPECIAL REPAIR/REPLACEMENT TO ARICREW CAFETERIA AT 9 SQN IN TECH AREA AF STN GWALIOR

Amount

Demoliton of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Demollition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc 15 cm thick below or above ground level and removing the demolished material to a distance exc 500 m but not exceeding 1.5 km and depositing where directed, complete all as specified and directed.

Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth, for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and getting out in soft/loose soil complete all as specified and directed.

Excavation in trenches, n exc 1.5 m wide and exc 1.5 m in depth but n exc 3m for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and getting out in soft/loose soil complete all as specified and directed.

M&L for plain cement concrete type D- 2,1:4:8 (using 40mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed.

M&L for R.C.C. grade M-25 (design mix) (using 20mm graded stone aggregate) in foundation, including rafts, footings and mass concrete complete all as specified and directed.

M&L for R.C.C. grade M-25 (design mix) (using 20mm graded stone aggregate) in Columns, pillars, piers, posts and struts complete all as specified and directed.

M&L for R.C.C. grade M-25 (design mix) (using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves complete all as specified and directed.

M&L for R.C.C. grade M-25 (design mix) (using 20mm graded stone aggregate) as in lintel beams & roof beams and in chajjas complete all as specified and directed.

M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work vertical at flat surface complete all as specified and directed.

M&L for formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed.

M&L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and directed.

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work including chajja not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

M&L for formwork to edges of concrete flats, slab exc 10cm but n exc 20cm wide complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for mlld steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for brick work with sub class 'B' old size bricks , straight or curved on plan exc. 6 m mean radius built in CM 1:6 in full brick thick walls complete all as specified and directed.

M&L for 15 mm thick rendering on other than fair faces of brick/ stone masonry walls in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed.

M&L for 15 mm thick rendering on fair faces of brick/ stone masonry walls in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed.

M&L for 5 mm thick rendering fair faces of concreteas in ceiling in CM 1:3 finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of old decorated surface of wall include brooming down with steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots, including filling the cracks and depressions and applying one coat of distemper oil emulsion white or tinted as approved complete all as specified and directed.

M&L for preparation of newly plastered surface of wall and applying two coats of distemper oil emulsion over a coat of primer & one coat of putty as approved complete all as specified and directed.

M&L for preparation of newly plastered surface of walls and applying two coats of weather coat exterior emultion paint white or tinted over a coat of primer & one coat of putty as approved complete all as specified and directed. . Make of paint: Berger paints weather coat smooth, Asian paints 'APEX', Shalimar paint 'XTRA, Nerolac paint 'AXCEL'

M&L for preparation of newly plastered surface of ceilng and applying two coats of distemper oil emulsion complete all as specified and directed.

M&L for hardcore of stone of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for 75 mm thick PCC (1:3:6) type C-1 (using 20mm graded stone aggregate) as in plinth protection, surface finished even & fair complete all as specified and directed.

M&L for 75 mm thick PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in sub base of flooring complete all as specified and directed.

M&L for 25 mm thick PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in levelling course/ sub floor complete all as specified and directed.

M&L for double charged vitrified ceramic tiles 10 mm thick (square/ rectangular) coloured (light shade) polished, area of each tiles exceeding 0.42 sqm not exceeding 1 sqm, in floors etc. set and jointed in neat cement slurry and pointed with white or coloured cement to match with tiles over & including 15 mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for double charged vitrified ceramic tiles 8-10 mm thick (square/ rectangular) coloured (light shade), polished, area of each tiles not exceeding 0.36 sqm, in skirting/ dado or vertical surface set and jointed in neat cement slurry and pointed with white or coloured cement to match with tiles over & including 10mm thick rendering on fair faces of brick work or concrete surface in cement moratar 1:4 complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 300 mm x 600 mm x 7mm thick in skirting/ dado or vertical surface set and jointed in neat cement slurry and pointed with white or coloured cement to match with tiles over & including 10mm thick rendering on fair faces of brick work or concrete surface in cement moratar 1:4 complete all as specified and directed.

M&l for Earth filling under floor obtained from excavation spreading and levelling in layers n exc. 25cm thick, well ramming including watering as required complete all as specified and directed.

Returning, filling in, with excavated soil, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

Removing excavated material to a distance exc 1.5 Km but n exc.n exc. 5 Km and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

M&L for pre construction Antitermite Treatment to the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed.

M&L for pre construction Antitermite Treatment to the backfill in contact with floor at the rate of 7.5 litres of emulsion per square metre (Area of the sub structure in contact with backfill to be measured) complete all as specified and directed.

M&L 25 mm thick PCC (1:2:4) type B-0 (using 12.5mm graded stone aggregate) as in benching, kerbs and padding/ levelling course etc over roof surface complete all as specified and as directed.

Supply only liquid water proofing compound conforming to IS complete all as specified and directed.

M&L for 10 mm thick screed bed in cement mortar 1:4 mixed with liquid water proofing compound as per manufacturer's instructions over roof top surface finished even and smooth using extra cement and application of water proofing treatment using APP modified membrane over existing inaccessible RCC roof slab / chajjah / canopy / parapet wall to be executed through approved applicator of the manufacturer with following specifications complete all as specified and directed :- (a) Cleaning existing surface properly. (b) Applying bitumen primer @ 0.30 litre / sqm manufactured by the same agency as that of APP membrane with a density 0.87-0.89 Kg per liter at 25 degree centigrade on prepared surface. (c) Applying hot blown grade bituminen 85/ 25 @ 1.2 Kg/ sqm over primer. (d) Laying APP modified water proofing membrane (not less than 3mm thick) weighing not less than 3.00 kg/ sqm reinforced with non woven polyster fiber weight not less than 160gsm/ sqm using butane torch by torch application with 10cm side laps and 15cm end lap by aithorized applicators. Make: IWL India Ltd / STP / Pidilite Industics Ltd etc o make as per Appendix 'B' to PS. (e) Applying a coat of aluminium paint over APP Membrane. Note : Water proofing compound shall be measured and paid seprerately under respective item of "BoQ".

M&L for granite stone (of any type) work 16-18 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like over & including 15mm thick rendering in cement mortar (1:4) including pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frame) exc 1.5 sqm but n exc 4 sqm each complete all as specified and directed.

S&F powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F powder coated anodised aluminium door shutters, aluminium section having vertical style, top and middle rail 44.5x85x3mm (thick) bottom rail 44.5x114x3mm ( thick) including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beading screws etc. complete all as specified and directed.

S&F anodised aluminium window and ventilator shutters, sliding type without sash bars, aluminium sections having thickness not less than 1.00mm including pvc sliding wheel ,necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.). hinges type B-21 100mm long (2 No.) suitable handle (1 No.), locking mechanism complete all as specified and directed.

S&F 5 mm thick tinted glass , ordinary quality and glazing to aluminium window and doors complete all as specified and directed.

S&F double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

S&F 4mm thick aluminium composite panel board, interior grade, fixed to aluminum doors complete all as specified and directed.

S&F 16 mm thick Armstrong DUNE RH 99 ceiling board with approved pattern (Make- Armstrong) 600 mm x 600mm size fixed over and including pre powder coated GI frame with suspension system (Grid) comprising of T section 25 mm x 32.5 mm x 1.6mm size as main runners and wall angle to placed along the wall at desired level of the false ceiling 4mm dia GI suspender of suitable size and dash fastners to be provided at desired distance and making good the dismantling portion including dismantling of existing false ceiling with snap grid, cover fillets etc complete all as specified and directed.

S&F 16 mm thick Armstrong DUNE RH 99 ceiling board with approved pattern (Make- Armstrong) 600 mm x 600 mm size fixed over and including pre powder coated GI frame with suspension system (Grid) comprising of T section 25 mm x 32.5 mm x 1.6 mm size as main runners and wall angle to placed along the wall at desired level of the false ceiling 4 mm dia GI suspender of suitable size and dash fastners to be provided at desired distance and making good the dismantling portion complete all as specified and directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.

S&F Solid PVC Wall Lining (Panelling) consisting of 5mm thick colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing all as specified and directed. Make : Rajshri/ Sintex

S&F 5 mm thick PVC sheet fillet of width 35 mm for wall panelling inclusive of fixing to wall to make PVC frame as per specification and drawing all as specified and directed.

Taking down shutters of any description n exc 1 sqm each complete all as specified & directed.

S&F 18mm thick Rajshri PVC celuka ply of both side laminated to make kitchen cabinet shutter/ drawer front shutters complete as per specifications complete all as specified and directed.

S&F external teak wood lipping, 6mm thick 25mm wide fixed with nails and favicol to the edges of prelaminated particle board desks and painted with colour matching with prelaminated particle board complete all as specified and directed.

S&F stainless steel handles 100 mm size for cabinets shutters as per specifications complete all as specified and directed.

S&F auto closing hinges 35mm of 0 crank (KH-001) OR 8 crank (KH-002) openable at 110 degree for kitchen cabinets shutters. Make: KAFF/ Hettich

S&F stain less steel sliding channels for drawer complete all as specified and directed.

S&F 35 mm size continuous (piano) hinges, mild steel, bright finish or electro galvanised complete all as specified and directed.

S&F for 2 lever brass lock for cupboard, grade I, size 50 mm complete all as specified and directed.

S&F sink made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495 mm x 420 mm, bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.

S&F in repair vitreous china wash hand basin, white oval type, size 550 mm x 400 mm fixed over marble slab, including 32 mm dia brass waste coupling, one 15 mm size CP pillar tape and including waste fitting and union complete all as specified and as directed .

M&L for cutting chases, pinning in, making good to facing where required & pointing in CM 1:3 for concealed water tubing and like not exc 10CM girth in brick wall etc complete all as specified and directed.

S&F in repair 75 mm internal bore of PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors/walls etc complete all as specified and directed.

S&F in repair 75 mm internal bore of PVC (SWR) bends with access door any radius etc complete all as specified and directed.

S&F 15 mm bore galvanised mild steel tubing of medium grade with all fittings & fixed complete to walls & ceiling or laid in trenches/ floors etc complete all as specified and directed.

S&F 20 mm bore galvanised mild steel tubing of medium grade with all fittings & fixed complete to walls & ceiling or laid in trenches/ floors etc complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations etc complete all as specified and directed.

S&F PVC connection 15mm dia with brass nuts of length 450mm etc complete all as specified and directed.

S&F brass CP wall mixer 15mm dia bore mixing hot & cold water for wash hand basin and kitchen sink screwed down for iron pipe and fixed complete all as specified and directed.

S&F 1000 litre capacity of rotational moulded polyethylene water storage tank multilayered construction, ISI marked of make specified (cylindrical vertical with closed top) hoisted and fixed in position including S & F 20 mm dia GI pipe medium grade washout pipe 450 mm long with plug and 20 mm dia GI pipe medium grade overflow pipe 600 mm long with fittings complete all as specified in SSR Part-I complete all as specified and directed.

S&F in repair 15 mm bore angle stop cock long thread fancy type chromium plated cast copper alloy, screwed down high pressure with crutch or butter fly handle screwed both and for iron pipe or for union and fixed etc complete all as specified and directed.

S & F in repair 20mm dia gun metal gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

Supply only 20 mm bore ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. .(Minimum weight 210 gms) etc complete all as specified and directed.

S&F in repair 15 mm bore bib taps long body chromium plated fancy type, cast copper alloy with crutch or butter fly handle screwed down screwed for iron pipe or for unions and fixed 15 mm bore etc complete all as specified and directed.

Material and labour for point wiring for one light point or one fan point controlled by one switch with using 1.5 Sqmm (nominal area) stranded copper conductor, single core, PVC insulated & unsheathed cable, 1100 volts grade in and including concealed PVC conduits (Medium grade) of size not less than 20 mm dia all as directed with sunken type pressed steel terminal box and junction boxes 1.6mm thick of suitable size, mounting for modular switches & sockets including all connected acessories as required at site ,regulators etc including all accessories and using 1.5 Sqmm (nominal area) stranded copper conductor single core conductor, PVC insulated & unsheathed cable as in earth wire connected to common earth dolly complete all as specified and directed. NOTE :- (i) Quoted rate shall be deemed to be included the cost of cutting chases in walls / pillars / column etc. of any description for concealing the conduit to required depth & making good the disturbed surface in CM 1:4 including finishing the surface to match with the existing surface. The portion of point wiring at ceiling shall be in surface PVC conduit/ casing & caping of suitable size fixed on ceiling surface with using PVC rawl plugs. (ii) Fittings like switches, sockets, regulators, lamp holders, light fittings shall be measured and paid for separately under appropriate item of BOQ. (iii) The quoted rates shall be deemed to be inclusive for provision of covering sunken boards/terminal boxes / junction base plates and connected accessories for mounting modular switches/Sockets all as directed.

Description same as per BOQ item No 78.00 here-in-before, but point wiring for 5 pin switch socket outlet combination, 5/6 Amps on independent board.

Description same as per BOQ item No 78.00 here-in-before, but point wiring for one six pin switch socket outlet combination, 15 Amps & 5 Amp (independent) with using 2.5 Sqmm (nominal area) stranded copper conductor and 2.5 Sqmm (nominal area) stranded copper conductor single core conductor, PVC insulated & unsheathed cable as in earth wire connected to common earth dolly complete all as specified and directed.

Supplying & fixing modular switche 6 Amps, one way, one module, 230 volts AC circuit complete all as specified and directed.

Supplying & fixing modular socket 6 amp 2/3 pin combined, 2 module outlet, 230 volts AC circuit complete all as specified and directed.

Supplying & fixing modular switch 16 Amps one module, 230 volts AC circuit complete all as specified and directed.

Supplying & fixing of ceiling rose 3 phase/ PVC/ polycarbonate , insulated body complete all as specified and directed.

S&F modular socket 6/16 amps 2/3 pin combined, 2 module outlets, 230 volts AC 50Hz supply 100 watt complete all as specified and directed. Note for Item No 78 to 85: The quoted rate is deemed to be inclusive of cost of modular cover/plates etc suitable for modular switche/sockets complete all as specified and directed.

Supplying and fixing ceiling fan compleate with accessories 230 Volts 1200 mm sweep complete all as specified and as approved

Supplying and fixing exhaust fan AC single phase 230/240 V of size 450 mm sweep heavy duty with louvers complete with making holes complete all as specified and directed.

M&L for sub main wiring in repair using four single core PVC insulated, unsheathed stranded copper conductor cable of size 10 Sqmm of voltage rating upto and including 1100 Volts drawn in recessed PVC conduit of dia not less than 32mm with standard accessories, alongwith four run of PVC (green colour) insulated, unsheathed, stranded copper conductor of size 10 Sqmm as earth continuity conductor all as specified and directed. NOTE: Four run of single core PVC cable with four run of earth conductor and conduit shall be measured as one unit.

M&L for sub main wiring using two single core PVC insulated , unsheathed stranded copper conductor cable of size 6 Sqmm of voltage rating upto and including 1100 Volts drawn in and including concealed PVC conduit of dia not less than 25 mm with standard accessories alongwith two run of PVC insulated ,unsheathed , stranded copper conductor also of size 6 Sqmm as earth continuity conductor all as specified and directed . \NOTE: Two run of single core PVC cable with two run of earth conductor and conduit shall be measured as one unit.

M&L for sub main wiring using two single core PVC insulated , unsheathed stranded copper conductor cable of size 4 Sqmm of voltage rating upto and including 1100 Volts drawn in and including concealed PVC conduit of dia not less than 25 mm with standard accessories alongwith two run of PVC insulated ,unsheathed , stranded copper conductor also of size 4 Sqmm as earth continuity conductor all as specified and directed . NOTE: Two run of single core PVC cable with two run of earth conductor and conduit shall be measured as one unit.

Supplying, fixing in replacement & testing decorative recess mounting 36 watt LED full out put luminaries suitable for Armstrong ceiling, white powder coated sheet steel housing with paralite P5 square parabolic louver block in metallic perforated frame for low glare, aluminium reflector and accessories,connecting the same to electric source with and including copper conductor 23/0.0076 flexible twisted twin core cable , including all accessories and fixing arrangements for fixing the light fitting to false ceiling complete all as specified and directed. Make :Bajaj cat part No BZRSQL 36W GZ1 NW "SKYLUX' Racess mounted 2x2 LED or equivalent in make given in Appendix 'B' to PS.

Supply, fixing, connecting & testing of sheet metal enclosures double door, triple pole and neutral, 4 way DBs for using MCBs / MCB isolators with having aluminium bus bars suitable for 200 Amps rating including disconnecting and taking down of old unserviceable distribution board with all fitting and fixture complete all as specified and directed.

S&F Isolator 4 pole 80 Amps , (`C’ series) having bracking capacity 10 KA complete all as specified and directed.

Supply & fixing MCB Single Pole and Neutral (SPN) of capacity 6 to 32 Amps, 240 Volts, breaking capacity 10 KA, ‘C’ series, fixed in proper position complete all as specified and directed.

Supply and fixing MCB Single Pole (SP) of capacity 6 Amps to 32 Amps, 240 V AC, breaking capacity 10 KA, C series, fixed in proper position complete all as specified and directed.

Supply and fixing water heater storage type , electric capacity 25 Litres complete with in and out put flexible pipe heavy duty . With non return valve.complete all as specified and directed.

Supply & fixing industrial type plug socket SPN and earth plug 250V ,20-32 Amps with steel enclosure and one MCB SP 32 Amps complete all as specified and directed.

Supply and fixing of 15 mm bore stop valve cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

Supply and fixing 15 mm bore bib tape cast copper alloy ,screwed down high pressure with crutch or butterfly handle , screwed both end for iron pipe or for unions complete all as specified and directed. .

Supply, install, commissioning and testing of split type wall mounted Air conditioner of capacity 2.0 TR (4500 K Cal/hr) single phase, (Non CFC/HCHC) suitable for 230 Volt + 10% , 50 Hz, AC supply complete with cordless remote control unit , minimum 3 star rating EER of 3.2 and above complete comprising of following :- Make: Blue star, Model No VLTU fixed speed AC 3 star or equivalent in make given in Appendin 'B' to PS. (a) Indoor unit copper coil with three speed blower fan of appropriate capacity including PCB, thermostatic control, air filter and drain for condensing water. (b) Out door unit comprising Compressor with motor, air cooled copper condenser with fan and motor and unit shall be installed out side the building/ on roof. (c) Refrigerant copper pipe for suction and discharge line with insulation , condensing water drain pipe & protected by suitable size of flexible PVC conduit with control valves & safety accessories including control wiring for evaporator & condensing unit with suitable size of copper cable. (d) Making good the disturbed surface to match the existing surface after plugging the hole etc. (e) PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in plinth suitable for installation of outdoor unit or powder coated MS bracket fixed on wallas per Manufacture's instruction with necessary grouting MS hold fast, bolts, washers duly painted and making good to disturbed surfaces suitable for installing outdoor unit of 1.5 TR AC complete all as specified and directed. (f) Electrical cable required to connect out door unit and indoor unit to voltage stablizer inclusive in quoted rate.

Supply and fixing voltage stablizer electronic type for automatic operation single phase naturally air cooled, indoor type, wall mounted for input variation between 170 V to 280 V with output voltage stablized at 200V to 245 V with accuracy of + 1% and of capacity 5.0 KVA complete all as specified and directed.

M/S NIRMAL SINGH DHANJAL