Repair/Replacement of Joinery, plumbing and connected BR items in OTM Accn in the area of AGE BR-1 under GE (West) Delhi Cantt-10

Amount

Taking down shutters of any description area n. exc 1.00 Sqm each complete all as specified & directed. Note : Window glazed /without glazed shutter remove through cutting and without distrubing window guard bar .

Taking down shutters of any description area exc 1.00 Sqm but n.exc 2.00 sqm each complete all as specified & directed.

Taking down chowkhats or frames with shutters (without taking off shutters from frames) area n.exc 1.5 sqm each complete all as specified & directed.

Taking down chowkhats or frames with shutters (without taking off shutters from frames) area exc 1.5 sqm but n.exc. 4.00 sqm each complete all as specified & directed.

S&F PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supply & fixing in opening and making good disturbed surfaces of jambs by matching with existing treatment complete all as specified & directed.

S&F factory made solid panel PVC door shutters 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rail, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement supplying and fixing in the frame at site complete all as specified & directed.

Supply and fixing for factory made single extruded WPC (Wood Polymer Composite) solid door/window ot other frames/chowkats of size 50 x 75mm comprising of vergin PVC polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibres (wood poder/rice husk/wheet husk) and non toxic additive etc all as per SSR park 2 ser No 08110A complete all as specified and as directed.

Supply and fixing Factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additive etc all as per SSR 2020 part-2 ser No 08105C, complete all as specified and as directed.

S&F in repair 75/100 mm size mortice lock of brass, vertical type, 4 levers, complete all as specified & directed.

S&F 18mm (+/-0.7mm) thick celuka PVC Ply of density 600kg/cbm manufactured by an ISO 900-2008 certified company one side prelam and other side plain for kitcher cabinate and capboard shutter and also manufacturer's test report and test certificate is mandatory with each and every supply of material complete all as specified and directed.

S&F 18mm (+/-0.7mm) thick celuka PVC Ply of density 600kg/cbm manufactured by an ISO 900-2008 certified company both side plain for Shelf/Partitions/Drawer and also manufacturer's test report and test certificate is mandatory with each and every supply of material complete all as specified and directed.

S&F 05mm thick celuka PVC Ply of density 600kg/cbm manufactured by an ISO 900-2008 certified company both side plain PVC Sheet for back side (Wall side) and also manufacturer's test report and test certificate is mandatory with each and every supply of material complete all as specified and directed.

S&F Modular kitchen Basket (SS) 15 to to 24 inch length divided into various section to hold diffenent styles and lengths of cutlery sutable for corner/pull out and side/front drawer complete all as specifed and directed.

S&F 100mm Hasp and Staple, Safety type, with stainless steel hinges pin including bolt to hinges plate and fixed with screws complete all as specified and directed.

S&F megnatic catches, and brass body and striking plate including letting in and fixed in repair complete all as specified and directed.

Supply & Fixed stainless steel telescopic Drawer channel of 18-20 Inches grade, polishesd, fixed with screws to timber drawer complete all as specified and directed.

S&F in repair 40 mm wide Continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and directed.

S&F in repair 40mm dia, cupboard knobs fixed with nut, screw and washer of brass, bright finished same as existing model for almirah and cup board complete all as specified and directed.

S&F 100mm size Stainless steel handle complete all as specifed and as directed.

S&F in repair aluminium body (extruded section) door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed complete all as specified & directed.

M&L for 4mm thick ACP sheet (Aluminium composite panel sheet) fixed in aluminium partion/door/window work including necessary jointing cleats, rubber beading, clips, etc complete all as specified and directed.

M&L Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified & directed.

Repairs to Aluminium Doors including taking down the shutter n.exc 2.00 Sqm each for repairs including replacement of defective parts of frame/shutters i.e. cleats, angle, scruew, clips, gasket, rubber beadings, channels etc and refixing in the same opening complete all as specified and directed (Note : certain builders hardware such as door closer, floor spring, door stopper, tower boldt, sliding bolt and handle, mortice lock and glass if replaced will be paid seperately in respective items).

Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as specified and directed.

S&F mild steel framed work as in door or gates of angle or other sections, cooler stands, with gusset plates rails, braces etc complete drilled for fixing of steel sheeting or other covering, doors etc to be prepared for hanging or sliding with and including either hooks and purpose made hinges or steel sheeting or other covering, running rails and guides) and hanging, fastening and fixing complete conforiming to Fe 290 Gde E-165.

S&F 35mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkat complete all as specified and directed.

S &F factory made 35mm thick plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part-I). klin seasoned and chemically pressure treated complete all as specified and directed.

M&L for stainless steel wire cloth 0.36 mm nominal dia of wire and average width of apperture 1.40 mm fixed to door/window frame complete all as specified and directed.

S&F butt hinges 100mm size, medium weight cold rolled mild steel and fixed to angle iron /steel chowkhat complete all as specified and directed.

S&F 100mm butt hinges type B-21, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed.

S&F aluminium anodised barrel tower bolt, extruded section 200mm size complete all as specified and directed.

S&F aluminium anodised Handles for 150mm size complete all as specified and directed.

S&F 300mm aluminium alloy, anodised,sliding door bolt with hasp, staple (bolt type) and fixingclips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

M&L for Preparation of new or previously untreated surfaces of wood or wooden base surface of any description not otherwise described over 10cm width or grith and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified.

M&L for Preparation of new or previously untreated surfaces of steel surface of any description not otherwise described over 10cm width or grith and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified & directed.

S&F 4.0 mm thick figured glass/ pin head type and glazing in squares not exc 0.5 Sqm in each pane complete all as specified and directed.

S&F 4.8 mm thick sheet glass ordinary quality and glazing in square not exc 0.5 Sqm in each pane complete all as specified and directed.

M&L for powder coated (50 micron) Anodised aluminium frame for doors, windows, ventilators, grill, partitions, sliding tracks, aluminium section for shutters suitable for two/three/four track window and aluminium section sliding members incl all necessary fittings and fixtures, jointing cleats, rubber packing, silicon packing etc complete all as specified and directed. (note : measured only aluminium part as per SSR part-1)

S&F powder coated aluminium window and ventilator shutters, side hung type with/ without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws, powder coated aluminium fittings such as peg stays 150mm long (1 No), hinges type B-21, 100mm long (2 Nos) suitable handle (1 No) complete all as specified and directed.

S&F Anodised aluminium powder coated door shutters,aluminium section weighing 0.55 kg/ m including necessary joining cleats,glazing clips, ruber neoprene packing, aluminium handles 2 Nos 150mm long in each shutter, hinges 03 Nos 100mm long in each shutter, Tower bolt 02 Nos 150mm long in each shutter, anodised aluminum snap beading screws etc. complete all as specifiedNote:-(Glass for doors and windows under this item shall be measured and paid seperately under respective item).

S&F 25mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides as shutter of cupboard complete all as specified and directed.

M&L for joint free non skid colour ceramic tiles 6-7mm thick (square/rectangular) area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 sqm, in floors etc, set jointed in neat cement slurry & pointed in coloured cement to match and including 15 mm thick screed bed in CM (1:6) incl dismantling floor hearth or wall tiling incl cement mortar bedding, terrazo dado, (incl backing) removing and rubbish off the premises complete all as spd and directed.

M&L for Glazed ceramic tiles in vertical surface, 7mm thick (square / rectangular) area of each tile 300x450x7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the tile over and including 10mm thick backing coat in CM 1:4 on fair faces of brick work or concrete surfaces incl dismantling floor hearth or wall tiling incl cement mortar bedding, terrazo dado, (incl backing) removing and rubbish off the premises complete all as specified and directed.

M & L for light shade or printed Glazed vitrified ceramic tiles 10mm thick (square/rectangular) polished, area of each tile n. exc 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match in patch work repair including 10mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces including dismantling old tile with backing complete all as specified and directed.

M & L for light shade or printed Glazed vitrified ceramic tiles 10mm thick (square/rectangular) polished, area of each tile exc 0.36 sqm but n. exc 0.96 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match in patch work repair including 10mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces including dismantling old tile with backing complete all as specified and directed.

M & L Rendering 12-15mm thick in Ready Mix Mortar on brick work or concrete surfaces of wall (Internal) and finished even and smooth including taking down cement plaster any description from wall surface and removing rubbish beyond MOD land complete all as specified and directed. Note :( height of bilding up to 4 Storey)

M&L for preparation of newly plastered surfaces and applying two coats of oil bound distemper including priming the wall surfaces and 1mm wall care putty complete all as specified and directed . Note :( height of bilding up to 4 Storey)

M&L for preparation of old plastered surfaces and applying two coats of oil bound distemper on the wall surfaces complete all as specified and directed . Note :( height of bilding up to 4 Storey)

S&F Solid PVC Wall Lining/penelling consisting of 5mm thick single side prelam PVC sheet used instead of plain colour sheet inclusive of solvent cement and fixing at site on PVC frame including 5mm thick PVC sheet fillet of width 35mm for wall paneling at distance of exceeding 30cm centre tor centre on verticl and at every end or joint of sheet in horizontal/vertical cinclusive of fixing on to wall to make PVC Frame as per specification and drawing including dismantling existing wall penelling/boarding any type.

S&F false ceiling with powder coated GI grid of size 600x600 mm using main Tee of size 24x28x0.40mm prepunched to accept cross tee of size 24x28x0.40mm and wall angles of size 25x25x0.40mm fixed with wall around of size with and including 4mm thick fiber cement board white colour designer tiles as approved by GE of size 595x595 mm placed in the grid and held in position duly suspended by 4mm dia GI wire hanger from the roof with holding down clips, butter fly clips and necessary provision for light fixture etc complete as per manufacturers instructions complete all as spd & directed including dismantling old false ceiling any type.

JAIPAL AND BROTHERS (BID ID -3465970)

M/S Davinder Kumar (BID ID -3466041)

M/s M M BAHL (BID ID -3465862)

A S CONSTRUCTION CO. (BID ID -3465809)