REPAIR/MAINT OF WOODEN AND STEEL FURNITURE AT HQ CIF(K) UNDER AGE (I) CIF (K)

Amount

Repairing of old unserviceable/broken parts of Charpoy GI pipe plytop and S&F/M&L follwing new parts/work all as per drgs and specified or directed by Engr-in-Charge. (Drawing No-FD-220/FD/MAP-II/01)

Removing of old unserviceable/broken plywood from Charpoy GI pipe, S&F new 12mm thick commercial plywood BWR Grade (ISI Marked) over exisiting Charpoy GI plytop and tight with 12 Nos new screws after necessery welding work of existing stiffners wherever required duly completed alongwith fwg repair work shown all as per drgs and directed by Engr-in-charge.

Removing old unserviceable/broken GI long rails from charpoy, S&F new size long rails of 32mm GI pipe medium grade, ISI marked duly new threaded on both sides including two nos 32mm GI check nuts all as per drgs.

Removing unserviceable/broken short rails of charpoy GI, cutting and fixing short rail from retrived old long rails as per ser No 1.02 above, duly threaded both ends complete all as per drgs.

Removing old broken legs of charpoy GI, cutting and fixing legs from retrived old long & short rails as per item ser No 1.02 & 1.03 above duly threaded one end with fixing of hardwood plug at bottom of leg all as per drgs.

Removing unsv/broken elbow of charpoy GI, S&F new GI Elbow 32mm dia 03 way, ISI marked all as per drgs.

Repair of old unserviceable/broken parts of Bed Plytop (1980x900mm)/IP and S&F/M&L following new parts/work all as per drgs and specified or directed by Engr-in-Charge. (Drawing No-FD-246/ FD/E6/MAP/08(R))

Removing old unserviceable/broken ply top from bed plywood/IP, S&F new 12mm th commercial plywood BWR grade, ISI marked over existing bed duly completed alongwith fwg works all as per drgs.

Removing old unserviceable/broken head rest from bed ply, S&F new head rest made out of 4mm teak ply facing both side alongwith 22 mm thick hard wood batten with 12mm half cut teakwood beading duly french polished complete with fwd works all as per drgs.

All as per item No 2.02 above but foot rest.

Removing old unserviceable/broken long rail from bed, S&F new long rail frame of 35x90mm made out of 1st class teakwood duly french polished all as per drgs.

All as per item No 2.04 above but short rail.

All as per item No 2.04 above but stiffeners (40x60mm) to support plywood.

All as per item No 2.04 above but legs made out of 400x60x60mm size all as per drgs.

Repairing old unserviceable/broken parts of CHAIR DINING and S&F/M&L following new parts/work all as per drgs and specified or directed by Engr-in-Charge. (DRAWING NO. FD-228/279)

Removing old unserviceable/broken plastic cane from chair dining, S&F new plastic cane of 2mm size and canning (Godrej pattern) to chair seat alongwith new wooden member screwed to side frames for canning on each side, duly completed all alongwith fwg repair/polish work. S&F new 4 nos hard rubber ring duly screwed at bottom of leg all as per drgs.

Removing old unsv/Broken rear legs from chair dining, S&F of new legs made out of 1st class teakwood duly french polished till gloosy shining to complete surface all as per drgs.

All as per item No 3.02 above but front leg.

All as per item No 3.02 above but back rail.

All as per item No 3.02 above but front rail.

All as per item No 3.02 above but side rail.

All as per item No 3.02 above but stiffener.

Removing old unserviceable/broken parts of CHAIR EASY and S&F/M&L following new parts/work all as per drgs and specified or directed by Engr-in-Charge. (DRAWING NO. FD-229/281)

Removing old unserviceable/broken plastic cane from chair easy, S&F new plastic cane of 2mm size and canning (Godrej pattern) to chair seat & back alongwith new wooden member screwed to side frames for canning on each side, duly completed all alongwith fwg repair/polished work. S&F new 4 nos hard rubber ring duly screwed at bottom of leg all as per drgs.

Removing old unserviceable/broken rear legs from chair easy, S&F of new rear legs made out of 1st class teakwood duly french polished till gloosy shining to complete surface all as per drgs.

All as per ser item No 4.02 above but front legs.

All as per ser item No 4.02 above but front frame.

All as per ser item No 4.02 above but back frame.

All as per ser item No 4.02 above but side frame.

All as per ser item No 4.02 above but arms.

CHAIR VERANDAH :- Removing old unserviceable/broken cane of chair verandah, S&F two coat of White synthetic enamel paint after welding work wherever required duly cleaning of iron surface. Supply & canning to complete chair (seat & back) with 2mm cane nylon/plastic in mat pattern. S&F 04 Nos hard rubber toe/shoe of 3mm size in bottom of legs all as per drgs. (DRAWING NO. FD-256/FD-359)

Removing old unserviceable/broken parts of CHAIR WRITING and S&F/M&L following new part/work all as per drgs and specified or directed by Engr-in-Charge. (DRAWING NO. FD-280)

Removing old unserviceable/broken plastic cane from chair writing, S&F new plastic cane of 2mm size and canning (Godrej pattern) to chair seat alongwith new wooden member screwed to side frames for canning on each side, complete alongwith fwg necessary repair/polished work. S&F new 04 hard rubber ring duly screwed at bottom of leg all as per drgs.

Removing old unserviceable/broken Rear legs from chair writing and S&F of new rear legs made out of 1st class teakwood duly french polished till glossy shining to complete surface all as per drgs.

All as per ser item No 6.02 above but front leg.

All as per ser item No 6.02 above but front rail.

All as per ser item No 6.02 above but back rail.

All as per ser item No 6.02 above but side rail.

All as per ser item No 6.02 above but stiffener.

All as per ser item No 6.02 above but arm.

Repair to old unserviceable/broken parts of CHAIR WB WITHOUT ARM and S&F/M&L the following new parts/work all as per drgs drgs and specified or directed by Engr-in-Charge: -(DRAWING NO. FD-58/285)

Removing old unserviceable/broken seat from chair WB, S&F of new seat made out of 6mm thick commercial plywood ISI marked with 6mm perforation & fixed with screws complete surface alongwith fwd works all as per drgs.

Removing old unserviceable/broken rear leg from chair, S&F of new leg made out of 1st class teakwood duly french polished till gloosy shining with hard rubber right at bottom of legs complete surface all as per drgs.

All as per item No 7.02 above but front leg.

All as per item No 7.02 above but front rail.

All as per item No 7.02 above but back rail.

All as per item No 7.02 above but side rail.

All as per item No 7.02 above but top support between rear leg.

All as per item No 7.02 above but stiffener.

Removing of old unserviceable/broken parts of SOFA (SINGLE SEAT) and S&F/M&L following new parts/work all as per drgs and specified or directed by Engr-in-Charge . (DRAWING NO. FD-281/373).

Removing old unserviceable/broken front leg of existing sofa single seater, S&F of new Front legs made of 1st class hard teakwood duly polished incl new Nylon buffers at bottom of legs, size and shape all as per drgs.

All as per ser item No 8.01 above but rear leg.

All as per ser item No 8.01 above but Front rail.

All as per ser item No 8.01 above but back rail.

All as per ser item No 8.01 above but back top frame.

All as per ser item No 8.01 above but Arm rest.

All as per ser item No 8.01 above but Side rail.

All as per ser item No 8.01 above but Seat/Back batten/bearers.

Takingout old unserviceable covered cushion of sofa, S&F new 100mm thick cushion 520x560mm (cool foam branded), 32mm density covered with best quality tapestry cloth (with zip covered). Colour shall be used after approval of Engr-in-Charge all as per drg.

Removing of old unserviceable/broken parts of SOFA TWO SEATER (1+1) and S&F/M&L following new parts/work all as per drgs and specified or directed by Engr-in-Charge. (DRAWING NO. FD-281/373).

Removing old unserviceable/broken front leg of existing sofa 2 seater (1+1), S&F of new Front legs made of 1st class hard teakwood duly polished incl new Nylon buffers at bottom of legs, size and shape all as per drgs.

All as per ser item No 9.01 above but rear leg.

All as per ser item No 9.01 above but Front rails.

All as per ser item No 9.01 above but back rails.

All as per ser item No 9.01 above but back top frame.

All as per ser item No 9.01 above but Arm rest.

All as per ser item No 9.01 above but Side rails.

All as per ser item No 9.01 above but Seat/Back batten/bearers.

Takingout old unserviceable covered cushion of sofa, S&F new 100mm thick cushion 520x560mm (cool foam branded), 32mm density covered with best quality tapestry cloth (with zip covered). Colour shall be used after approval of Engr-in-Charge all as per drg.

Removing old unserviceable/broken parts of TABLE 3'x2' with/without drawer and S&F/M&L the following new parts/work all as per drgs and specified and directed by Engr-in-Charge. (DRAWING NO. FD-283/284)

Removing old unserviceable/broken table top, S&F new top of 18/19mm thick MDF/pre-laminated particle board of one side teak face exterior grade, ISI marked screwed so long from top rail including 04 mm thick 1st class teak wood beading duly french polished alongwith fwg works. S&F 4 nos new hard rubber ring screwed at bottotm of legs complete all as per drgs.

Removing old unserviceable/broken legs from table, S&F of new legs made out of 1st class teakwood duly french polished till gloosy shining to complete surface all as per drgs.

All as per ser item No 10.02 above but Long rail.

All as per ser item No 10.02 above but short rail.

All as per ser item No 10.02 above but stiffner.

All as per ser item No 10.02 above but Drawers with decorative knob.

Repair to old uunserviceable/brokensv/broken part of MIRROR WITH SHELF and S&F/M&L following new parts/work all as per drgs and specified or directed by Engr-in-Charge. (DRAWING NO. FD-52M)

Removing old unserviceable/broken frame from existing mirror with shelf, S&F new 25x19mm frame of 1st class teakwood with 4mm TW beading duly french polished till gloosy shining to complete surface alongwith fwg works all as per drgs.

Removing old unserviceable/broken mirror of mirror with shelf, S&F new mirror of 5.5mm thick, ISI marked all as per drgs.

Removing old unserviceable/broken back surface of plywood of mirror with shelf, S&F new back made out of 6mm th plywod ISI Marked with 2 nos new key plate for handing of mirror all as per drgs.

Removing old unserviceable/broken shelf of mirror with shelf, S&F new shelf made out of 18/19mm thick MDF/pre-laminated particle board of one side teak face exterior grade, ISI marked including 04mm thick 1st class teak wood beading duly french polished with support of 2 nos MS bracket duly screwed so long all as per drgs.

Removing old unserviceable/broken parts of TABLE BED SIDE and S&F/M&L following new parts/work all as per drgs and specified or directed by Engr-in-Charge. (DRAWING NO. FD-276)

Removing old unserviceable/broken top of table bed side, S&F new top made out of 18/19mm th MDF/prelaminated particle board of teak veneered outside with 4mm th teak wood edging alround duly french polished alongwith fwg works all as per drgs.

All as per ser item No 12.01 above but sides support of table all as per drg.

Removing old unserviceable/broken shelves of table bed side, S&F new shelves made out of 12mm thick med density fiber board/particle board with teak veneered top ISI marked complete all as per drgs.

Removing old unsv/broken back side ply wood of table bed side, S&F new back side made out of 6mm thick ply wood commercial ISI marked complete all as per drgs.

Removing old unserviceable/broken parts of TABLE CENTRE and S&F/M&L the following new parts/work all as per drgs and specified or directed by Engr-in-Charge. (DRAWING NO. FD-235/274)

Removing old unserviceable/broken top of table Centre, S&F new top made out of 18/19mm th MDF/prelaminated particle board exterior grade of teak veneered outside screwed so long from top rail alongwith 4mm thick teakwood edging alround of top complete alongwith fwg works all as per drgs.

Removing old unserviceable/broken top long rail of table centre, S&F new long rail made of 1st class hard teak wood duly french polished incl new Hard Nylon rings/buffers at bottom of legs complete all as per drgs.

All as per ser item No 13.02 above but top short rails.

All as per ser item No 13.02 above but bottom side rails.

All as per ser item No 13.02 above but legs.

All as per ser item No 13.02 above but top centre stiffner.

Repair old unserviceable/broken parts of TABLE DINNING 4 PERSON (1200x900x750mm) and S&F/M&L the following new parts/work all as per drgs drgs and specified or directed by Engr-in-Charge. (DRAWING NO.FD-FD/MAP-II/03)

Removing old unserviceable/broken top of table dining, S&F new table top made out of 18/19mm MDF board/pre-laminated particle board of exterior grade with 6mm TH TW lipping alround duly polished complete alongwith fwg work all as per drgs.

Removing old unserviceable/broken legs of table dining, S&F new legs made out of 1st class teak wood with MS right angle screwed with rail & leg for extra strength duly french polished incl new Hard Nylon buffers screwed at bottom of legs complete all as per drgs.

All as per ser item No 14.02 above but long rail.

All as per ser item No 14.02 above but short side rail.

All as per ser item No 14.02 above but stiffner.

Repair old unserviceable/broken parts of TABLE DINNING 6 PERSON (1500x900x760mm) and S&F/M&L the following new parts/work all as per drgs drgs and specified or directed by Engr-in-Charge. (DRAWING NO.FD-239/ 269/273 /376)

Removing old unserviceable/broken top of table dining 6 persons, S&F of new top made out of 18/19mm MDF/pre-laminated particle board, exterior grade including 6mm th TW lipping alround duly polished complerte alongwith fwg work all as per drgs.

Removing old unserviceable/broken legs of table dining, S&F new legs made out of 1st class teak wood with MS right angle screwed with rail & leg for extra strength duly french polished incl new Hard Nylon buffers screwed at bottom of legs complete all as per drgs.

All as per ser item No 15.02 above but long rail.

All as per ser item No 15.02 above but short side rail.

All as per ser item No 15.02 above but stiffner.

Repair old unserviceable/broken parts of TABLE DINNING 8 PERSON (1800x900x760mm) and S&F/M&L the following new parts/work all as per drgs drgs and specified or directed by Engr-in-Charge. (DRAWING NO.FD-239/ 269/273 /376)

Removing old unserviceable/broken top of table dining 8 persons, S&F of new top made out of 18/19mm MDF/pre-laminated particle board, exterior grade including 6mm th TW lipping alround duly polished complete alongwith fwg work all as per drgs.

Removing old unserviceable/broken legs of table dining, S&F new legs made out of 1st class teak wood with MS right angle screwed with rail & leg for extra strength duly french polished incl new Hard Nylon buffers screwed at bottom of legs complete all as per drgs.

All as per ser item No 16.02 above but long rail.

All as per ser item No 16.02 above but short side rail.

All as per ser item No 16.02 above but stiffner.

Repair to old unserviceable/broken parts of TABLE OFFICE CLERK STEEL and S&F the following new parts/work all as per drgs drgs and specified or directed by Engr-in-Charge. (DRAWING NO. FD-84 & 1004)

Removing of old unserviceable/broken top of table, S&F new top made out of 18/19mm th MDF/prelaminated particle board (ext grade) ISI Marked teak veneered face with 4mm th TW beading alround with french polished complete alongwith fwg work all as per drgs.

M&L for painting of table steel with one coat of synthetic enameled OG paint after necessary welding work wherever required. S&F 04 new legs shoes at bottom of legs complete all as per drgs.

Removing of old unserviceable/broken drawers of table, S&F new drawers made out of 1mm TH MS sheet incl one coat of synthetic enameled OG paint over a coat of primer complete all as per drgs.

Removing of old unserviceable/broken locks of table, S&F new locking arrangment complete all as per drgs.

Repair to old unserviceable/broken parts of TABLE WRITING and S&F/M&L the following new parts/work all as per drgs drgs and specified or directed by Engr-in-Charge. (DRAWING NO. FD-268/275)

Removing old unserviceable/broken top of table writing, S&F new top made out of 18/19mm th MDF/pre-laminated particle board one side teak face, exterior grade, ISI marked with 4mm thick 1st class TW beading alongwith fwg work all as per drgs.

Removing old unserviceable/broken drawer of table, S&F new drawer made of 12 th planks with bottom of 6mm th plywood, wooden bearer with new recessed handle to drawer all as per drgs.

Removing old unserviceable/broken locking device & handles, S&F new locking arrangement and new recessed handle.

Removing old unserviceable/broken legs of table, S&F new leg made out of 1st class hard TW, duly french polished.

All as per item No 18.04 above but top front long rail.

All as per item No 18.04 above but top side short rail.

All as per item No 18.04 above but bottom large stiffener

All as per item No 18.04 above but bottom short stiffener

Repair to old unserviceable/broken parts of TEAPOY and S&F/M&L the following new parts/work all as per drgs drgs and specified or directed by Engr-in-Charge: (DRAWING NO. FD-278/382)

Removing of old unserviceable/broken top of teapoy, S&F new top made out of 18/19mm th pre-laminated particle board (ext grade) ISI marked with 4mm TH 1st CL TW beading alround incl french polished alongwith fwg work all as per drgs.

Removing old unserviceable/broken top long rail of teapoy, S&F top long rail made out of 1st class hard teakwood, duly french polished made to shape all as per drgs.

All as per item No 19.02 above but top short rail.

All as per item No 19.02 above but legs.

All as per item No 19.02 above but stiffners.

Repair to old unsv/broken parts of TABLE DRESSING GENTS and S&F/M&L the following new parts/work all as per drgs drgs and specified or directed by Engr-in-Charge. (DRAWING NO. F-230)

Removing old unserviceable/broken mirror, S&F new 5mm TH electro copper plated mirror of polished glass with 6mm TH plywood framed with 25x35mm TW batten alround with suitable key plate for hanging complete alongwith fwg work all as per drg.

Removing old unserviceable/broken drawer of table dressing gents, S&F new drawers made of 12mm th particle board fixed with 1.5mm plastic laminated sheet of teak face of front side of drawers with 3mm TW edging duly polished.

Removing old unserviceable/broken top of table, S&F new top made out of 12mm th particle board fixed with 1.5mm plastic laminated sheet of teak face with 3mm teak wood edging complete all as per drgs.

Removing old unserviceable knob, S&F of 25mm CP new knob of best quality complete all as per drgs.

Repair to old unserviceable/broken parts of BOOK CASE and S&F/M&L the following new parts/work all as per drgs drgs and specified or directed by Engr-in-Charge. (DRAWING NO. F-237)

Removing old unserviceable/broken back plywood, S&F fixing new back made of 6mm TH plywood commercial ISI mark complete alongwith fwg work all as per drgs.

Removing unserviceable/broken top of book case, S&F new top made out of 18/19mm TH pre-laminated particle board one side with teak veneer on top face with 3mm TW edging alround all as per drgs.

All as per item No 21.02 above but shutters with hings continious piano type rest all as per drg.

All as per item No 21.02 above but bottom surface.

All as per item No 21.02 above but sides.

Removing old unserviceable/broken legs of book case, S&F new legs made out of 1st class teakwood duly french polished rest as per drgs.

All as per item No 21.06 above but bottom long rail.

All as per item No 21.06 above but bottom short rail.

Removing old unserviceable/broken knob of book case and S&F new double full size knob rest all as per drgs

Repair to old unserviceable/broken parts of SIDE BOARD and S&F/M&L the following new parts/work all as per drgs drgs and specified or directed by Engr-in-Charge. (DRAWING NO. FD - 241/ 371)

Removing unserviceable/broken Top of side board, S&F new top made out of 19mm th pre laminated particle board one side with teak veneer on top face with 4mm polished TW edging alround complete alongwith fwg works all as per drgs.

Removing unserviceable/broken Shutter of side board, S&F of new shutter made out of 18/19mm thick pre-laminated particle board (ext grade) ISI marked one side teak face with 2 nos anodised metalic knobs of teak colour all as per drgs.

All as per item No 22.01 above but shelf.

All as per item No 22.01 above but bottom.

All as per item No 22.01 above but side.

All as per item No 22.01 above but drawer.

Removing unserviceable/broken back of side board, S&F new back made out of 12mm TH TW particle board with teak veneered finish one side all as per drgs.

Removing unserviceable/broken legs of side board, S&F new short legs made out of 1st class hard teakwood, duly french polished all as per drgs.

Repair to old unserviceable/broken part of TABLE PEG and S&F/M&L following new parts/work all as per drgs and specified or directed by Engr-in-Charge. (DRAWING NO. FD - 236/277, 384)

Removing old unserviceable/broken top of table peg, S&F new top made out of 18/19mm thick MDF/pre-laminated particle board of one side teak face exterior grade, ISI marked screwed so long from top rail including 04 mm thick 1st class teak wood beading duly french polished alongwith fwg work all as per drgs.

Removing old unserviceable/broken legs from Peg table, S&F of new legs made out of 1st class teakwood duly french polished till gloosy shining to complete surface all as per drgs.

All as per ser item No 23.02 above but top side long rails.

All as per ser item No 23.02 above but top side short rails.

All as per ser item No 23.02 above but stiffner/bottom rails.

TABLE 3'x3' (STEEL) with/without drawer: Removing old unserviceable/broken top from table 3'x3' with/without drawer, S&F of new top made of 18/19mm thick pre-laminated particle board exterior grade ISI marked alongwith 4mm th teak wood beading/Std PVC edging alround the top after completing necessary welding work wherever required duly applying one coat of synthetic enamel OG paint all over iron surface. S&F 4 nos new hard rubber toe at bottotm of legs complete all as per drgs and specified or directed by Engr-in-Charge. (DRAWING NO. FD - 1009/1010)

Repair to old unserviceable/broken parts of TABLE OFFICE OFFICER STEEL and S&F/M&L the following new parts/work all as per drgs drgs and specified or directed by Engr-in-Charge. (DRAWING NO. FD - 85/1002/1003)

Removing of old unserviceable/broken top of table officer steel, S&F new top made out of 18/19mm pre-laminated particle board exterior grade, ISI marked including 4mm TH TW beading alround duly french polished alongwith fwg works all as per drg.

Repairing and painting of table office officer steel after necessary repair/welding works wherever required with one coat of synthetic enameled OG paint. S&F 4 Nos new legs shoes all as per drg.

Removing of old unserviceable/broken drawers of table, S&F new drawers made out of MS sheet 01mm thick including one coat of synthetic enamele OG paint over one coat of primer paint, size and shape shall be as per drgs.

Removing of old unserviceable/broken drawer's locks of table officer steel, S&F new lock of ISI marked as approved, all as specified and directed by Engr-In-Charge.

M&L for preparing old wooden surfaces by sand paper of following furniture items and applying one coat of french polish till gloosy finishing all as specified as shown on drg against each.

Bed Hard (Drawing No. FD 246)

Chair Dinning (Drawing No. FD 228/ FD/E6/MAP-II/05)

Peg Table(Drawing No. FD 277/384)

Table bed side (Drawing No. FD 276)

Table Writing (Drawing No. FD 249/275/268)

Table 3'x2' without drawers (Drawing No. FD 284)

Sofa (Single seat piece) (Drawing No. FD 281/373)

Sofa (3 seater, single piece) (Drawing No. FD 281)

Chair Writing (Drawing No. FD 280)

Chair WB with out arms (Drawing No. FD 285)

Book case (Drawing No. FD 237)

Chair Easy (Drawing No. FD 229)

Table Dinning 6/8 persons (Drawing No. FD 273/269/239/MAP)

Table 3'x2' with drawers (Drawing No. FD 283)

Table Centre (Drawing No. FD 274/375)

Table dressing gents with mirror (Drawing No. FD 230/MAP)

Table dressing ladies with mirror (Drawing No. FD 251/378/MAP)

Teapoy (Drawing No. FD 278/382)

Sofa (5 seater) (Drawing No. FD 281)

Sofa (4 seater, single piece) (Drawing No. FD 281)

M&L for preparing old steel surfaces scraping with sand paper of rusted portion of following furniture items and applying one coat of synthetic enamel paint (OG/Black) inside and outside all as per drg, specified and directed by Engr-In-Charge.

Almirah large steel (Drawing No. FD 1031/FD/E6/MAP/18)

Almirah med steel (Drawing No. FD 1032)

Book case steel (Drawing No. FD-1028/1047)

Locker bed side steel (Drawing No. FD 1029)

Table office clk steel (Drawing No. FD-84/1004)

Table officer steel (Drawing No. FD-85/1003)

Repair to old unserviceable/broken parts of TABLE DRESSING LADIES and S&F/M&L the following new parts/work all as per drgs drgs and specified or directed by Engr-in-Charge. (DRAWING NO. FD-251/378/FD/MAP-II/07)

Removing old unserviceable/broken mirror, S&F new 5mm TH electro copper plated mirror of polished glass with 6mm TH plywood framed with 45x40mm TW batten alround with suitable key plate for hanging complete alongwith fwg work all as per drg.

Removing old unserviceable/broken drawer of table dressing ladies, S&F new drawers made of 12mm th particle board fixed with 1.5mm plastic laminated sheet of teak face of front side of drawers with 3mm TW edging duly polished.

Removing old unserviceable/broken top of table, S&F new top made out of 12mm th particle board fixed with 1.5mm plastic laminated sheet of teak face with 3mm teak wood edging complete all as per drgs.

Removing old unserviceable/broken knob, S&F of 25mm CP new knob of best quality complete all as per drgs.

Repair to old unserviceable/broken parts of locker bed side steel and S&F the following new parts/work all as per drgs and specified or directed by Engr-In-Charge. (DRAWING NO. FD-1029)

Preparing steel surfaces of locker steel and applying one coat of synthetic enamel paint OG shade through spray gun to both inner and outer side after completing necessary welding, denting work including 20mm CP steel conduit pipe 1.6mm thick with socket all as directed by Engr-In-Charge.

Removing unserviceable CP steel handle 100mm long and S&F new handle all as per drawing.

Removing unserviceable CP hasp & staple 75x40x3mm and S&F new haspe & staple all as per drawing.

Removing old unserviceable legs of locker steel, and S&F new legs made of 1mm thick black steel sheet duly one coat of primer and two coat of OG paint complete all as per drawing.

Removing old unserviceable shutters of locker steel, and S&F new shutter made of 1mm thick black steel sheet duly one coat of primer and two coat of OG paint complete all as per drawing.

Repairs / Painting to almirah medium steel with shelves (DRAWING NO. FD-67/1032)

Preparation of steel surfaces, including rusted portion of almirah by scrapping with sand paper and applying one coat of synthetic enamel OG paint with spray gun on complete almirah inside and outside after completing welding, denting works wherever required. Complete all as specified and directed by Engineer-In-Charge.

Removing of old unserviceable /broken handle of almirah including S&F new CP handle as approved by Engineer -In-Charge.

Removing of old unserviceable /broken lock of almirah including S&F new lock as approved by Engineer -In-Charge. (Make-Godrej/Harrison/Link )

Removing of old unserviceable /broken single shelf of almirah including S&F new shelf made out of MS sheet 1mm thick fabricated to shape and size complete all as per drawing.

Removing of old unserviceable /broken legs of almirah including S&F new legs made out of MS sheet 1mm thick fabricated to shape and size complete all as per drawing.

Removing of old unserviceable /broken clips for fixing of almirah including S&F new clips made out of mild steel complete all as per drawing.

Repairs / Painting to almirah large steel with shelves (DRAWING NO. FD-67/1031)

Preparation of steel surfaces, including rusted portion of almirah by scrapping with sand paper and applying one coat of synthetic enamel OG paint with spray gun on complete almirah inside and outside after completing welding, denting works wherever required. Complete all as specified and directed by Engineer-In-Charge.

Removing of old unserviceable /broken handle of almirah including S&F new CP handle as approved by Engineer -In-Charge.

Removing of old unserviceable /broken lock of almirah including S&F new lock as approved by Engineer -In-Charge. (Make-Godrej/Harrison/Link )

Removing of old unserviceable /broken single shelf of almirah including S&F new shelf made out of MS sheet 1mm thick fabricated to shape and size complete all as per drawing.

Removing of old unserviceable /broken legs of almirah including S&F new legs made out of MS sheet 1mm thick fabricated to shape and size complete all as per drawing.

Removing of old unserviceable /broken clips for fixing of almirah including S&F new clips made out of mild steel complete all as per drawing.

Repair to old unserviceable/broken part of SLEEPING PLATEFORM WOODEN and S&F/M&L following new parts/work all as per drgs and specified or directed by Engr-in-Charge. (DRAWING NO. FD-69/128)

Removing old unserviceable/broken wooden planks (900 x 150 x 25mm) size from sleeping plateform and S&F new wooden planks made out of 1st class hard TW clean, duly french polished alongwith following work all as per drgs.

All as per ser item No 32.01 above but side long rail.

All as per ser item No 32.01 above but short rail.

All as per ser item No 32.01 above but legs.

All as per ser item No 32.01 above but stiffener.

Removing of old unserviceable/broken parts of SOFA FIVE SEATER (3+1+1) and S&F/M&L following new parts/work all as per drgs and specified or directed by Engr-in-Charge. (DRAWING NO. FD-281/373).

Removing old unserviceable/broken front leg of existing sofa 5 seater (3+1+1), S&F of new Front legs made of 1st class hard teakwood duly polished incl new Nylon buffers at bottom of legs, size and shape all as per drgs.

All as per ser item No 33.01 above but rear leg.

All as per ser item No 33.01 above but Front rails.

All as per ser item No 33.01 above but back rails.

All as per ser item No 33.01 above but back top frame.

All as per ser item No 33.01 above but Arm rest.

All as per ser item No 33.01 above but Side rails.

All as per ser item No 33.01 above but Seat/Back batten/bearers.

Takingout old unserviceable covered cushion of sofa, S&F new 100mm thick cushion 520x560mm (cool foam branded), 32mm density covered with best quality tapestry cloth (with zip covered). Colour shall be used after approval of Engr-in-Charge all as per drg.

Note :- An amount of Rs. Rs 10,610.00 on account of credit schdule for Sch 'A' Part-II Shall be deducted from the total amount of BOQ to arrive at the contract sum.

M/S RATHER STEEL WORKS (BID ID -3490503)

M/S B A Traders (BID ID -3490428)

DUKE CONSTRUCTION (BID ID -3487662)