Providing Live Audio Video project system at BABA BALAK NATH temple at Deotsidh distt. Hamirpur HP. SH Prov.additional LED Display there in.

Amount

Supply installation testing and commissioning of 65" Ultra HD,4k smart LED display , With three year warranty,Viewing angle 178/178 degree, picture resolution 3840x2160, 4HDMI slot, inbuilt wi-fi, LAN interface, 3USB port, 1RS-232C Input(s), Possible for picture rotation, Orientation : Landscape/ Portrait, pixel changes, OSD rotation, System storage: 2 GB RAM(external), Flash Memory : 16 GB(External), 3.5 mm headset Jack, Inbuilt speaker : 2x20watt,Operating system": Android, operating temperature would be -5 to 40 degree Celsius. Make: Sony/Samsung/ Panasonic as approved by the Engineer in charge.

Supply, Installation, Testing and Commissioning of 65"LED TV Cabinet with toughened glass in front not less than 6mm thick including hanging arrangement complete in all respect as approved by the Engineer in charge. Custom/OEM

Supply, Installation, Testing and Commissioning of Monkey menance for 65"LED TV rectangular including painting compleate in all respect as approoved by the engineer incharge.Make:Custom

Supply, Installation, Testing and commissioning of network Switch with Power on Ethernet (PoE) enabled, 8 Port 10/100/1000 base as required complete in all respect. Make: Cisco/Extreme/juniper as approved by the Engineer in charge.

Supply installation testing and commissioning of Decoder convert video from LAN to HDMI shall have Inputs: 1 Ethernet (LAN/PoE) on an RJ−45 connector, Outputs: 1 HDMI connector, 2 left and right unbalanced stereo audio on RCA connectors, 1 RS−232 on terminal block connectors, 2 USB (type A) ports, 1 IR on 3.5mm mini jacks (Tx), 1 Ethernet on an RJ−45 connector, Network Switch: 1G multicast, IMGP snooping non−blocking, Streaming: Unicast and multicast through RTSP, Controls: Reset button, up and down channel buttons, channel 7−segment display, STATUS, Video Encoding/ Decoding : JPEG 2000, Resolution: 1920×1200 @60Hz, 1920×1080@60Hz, Operating Temperature: 0° to +40°C, Power Consumption: 48V DC, with all accessories as required complete in all respect Make: Kramer, Extron , Crestrone as approved by the Engineer in charge.

Supply installation testing Commissioning of 6 meter HDMI male to HDMI male cable for input. Make: Kramer, Extron, Crestron as approved by the Engineer in charge.

Supply ,Installation ,Testing and Commissioning of Cat6 UTP 24-26 AWG Patch Cord - 1.5 mtr with cross separator, Manufactured from stranded wires for flex-life, Minimum length 1m, LSZH (Low Smoke Zero Halogen) standards like IEC 60332-1 Make : Panduit/ systimax/ R&M/Siemon/Huber-Suhner as approved by the Engineer in charge.

Supply, installation, testing and commissioning of OPTICAL FIBER PIGTAILS, 1.5 meter SM OS2. Precision ferrule end face geometry SC type SM. Factory polished, tested and serialized. Buffer diameter: 900um tight buffer. Minimum bend radius: install: 30 mm. Retention Strength: 100N. Cable: 900um buffered. Sheath: LSZH. Make:- Panduit/R & M/ Systimax / Siemon /HFCL/Huber-Suhner.as approved by the Engineer in charge.

Supply installation testing and commissioning of Media Converter UTP based LAN from 100Meters to distance of 10 Km and beyond using Fibber optics media, shall be featured with TP Port Supports Auto Negotiation and Auto-MDI-X, Powered by USB, Fiber Mode : Single Mode, Fibber Cable Distance: 10 Kms. Make: Digisol /Tp-link as approoved by the Engineer in charge.

Supply, Installation, Testing and Commisioning of 2U rack for power strip,PDU,Hardware Mounting Kit Make : Comrack/ APW/Netrack/ Perfect Rack

Supplying and installation of modular Light plug point compleate with 3 no 5amp switch and 3no 5a socket compleate in all respect.

Supplying and drawing following size of PVC insulated, heat resistant, flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in existing surface / recessed, Steel/PVC conduit as required.3x1.5 Sq. mm.

Supply, installation, testing and commissioning of 12 port fiber LIU fully loaded which have sufficient slots to accommodate 12 duplex LC / SC ports, should have fiber management provision inside with splice tray and other accessories, should be rack mountable IU, should have splice holder for minimum 6 fiber cores should be made of cold rolled steel. Material should steel: 1.5 mm, powder coated. Make:- Panduit/R & M/ Systimax / Siemon /HFCL/Huber-Suhner.as approved by the Engineer in charge.

Supply, installation, testing and commissioning of OFC armored outdoor Single-mode 6 Core ISO / IEC 11801 certified type OS 2 and ITU-T REC G652 tube identification single tube / multiple tube fiber protection (Tube): Polybutylene Terephthalate (PBT). Water Blocking: Thixotropic Gel (Tube) and Petroleum Jelly (Interstices). Core Wrapping: Polyethylene Terephthalate. Armoring: Corrugated Steel Tape Armor (ECCS Tape). Strength Member: Two Steel wires on periphery / two FRP rods on periphery / Central Strength Member FRP. Sheath: UV Stabilized Polythene (HPDE). Maximum Tensile Strength - Short Terms: 3000N or better. Mass (Nominal : Minimum 175±10% Kg/km. Make:- Panduit/R&M/Systimax/Siemon/HFCL/Huber-suhner as approoved by the Engineer incharge.

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required. Make: Beldon, Panduit,Polycab systimax/Huber-Suhner as approoved by the Engineer incharge.

Supplying and fixing of 25mm PVC conduit(Heavy Duty ISI marked ) along with the accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required:-. Make:Diplast/ Polyindia/ AKG/Finolex as approoved by the Engineer in charge.

Note:All the rates quoted by the contractor shall be complete finished work including three year free warranty and cost of all labour, material, scaffolding, finishing as required with tools, plants, lead, lift, taxes, tollage, octroi, royalties etc. All works shall be executed as per drawings, specification and instructions of Site incharge and shall include the supply and installation at site of all the equipment, ancillary materials as specified and all such items what-so-ever which may be required to fulfill the intent and purpose as laid down in the specification and/or the drawings. All materials shall be as per ISI specification and with BIS Registration Number and its validity Certifications marked wherever applicable. The material shall be duly approved by Site incharge before incorporation in the actual work., no sub brand will be allowed. For general specifications Max-± 5% deviation in parameters will be allowable provided that it may not effect the performance of the system.

AMBICA ELECTRICALS