COMPREHENSIVE MAINTENANCE AND POST CONSTRUCTION ANTI TERMITE TREATMENT IN CERTAIN BLDG IN ZONE B IN TECH AREA AT AF STN SURATGARH

Amount

BOQ (COMPREHENSIVE MAINTENANCE AND POST CONSTRUCTION ANTI TERMITE TREATMENT IN CERTAIN BLDG IN ZONE "B" IN TECH AREA AT AF STN SURATGARH)

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for glazed ceramic coloured tiles in vertical surface 300mmx450mmx7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L for glazed ceramic coloured tiles in vertical surface 200mmX300mmX7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L for white non-skid ceramic tiles 7mm to 8mm thick (square/rectangular) and area of each tiles exc 0.06sqm but not exc 0.11sqm laid in floors, set and jointed in neat cement to match the shade over and including screed bed of 15mm thick in cement mortar 1:6 complete all as specified and directed.

M&L for joint free non-skid ceramic coloured tiles 7mm to 8mm thick (square/rectangular) area of each tiles exc 0.06sqm but not exc 0.11sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed of 15mm thick in cement mortar 1:6 complete all as specified and directed.

M&L for white non-skid ceramic tiles area of tiles 7mm to 8mm thick (square/rectangular) area of each tiles exc 0.11sqm but not exc 0.18sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed layer of 15mm thick in cement mortar 1:6 complete all as specified and directed.

M&L for joint free non skid ceramic coloured tiles 7mm to 8mm thick (square/rectangular) area of each tiles exc 0.11sqm but not exc 0.18sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed 15mm thick in cement mortar 1:6 complete all as specified and directed.

M&L for vitrified ceramic tiles Light shade 10mm thick (square/rectangular) polished area of each tiles not exc 0.36sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed 15mm thick in cement mortar 1:6 complete all as specified and directed.

M&L for machine cut kota stone slab flooring 20mm-25mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including demolition of stone slab and tiles of any description or thickness including screed bed 20mm thick in cement mortar 1:6 complete all as specified and directed.

M&L for kota stone slab 20mm-25mm thick in riser of steps, skirting, dado and pillar laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including demolition of stone slab and tiles of any description or thickness and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L for granite tile 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white/coloured cement with admixture of pigment to match the shade of granite tile including cutting and polishing etc including screed bed 20mm thick in cement mortar 1:6 complete all as specified and directed.

All as per item No 11 above but on dado/skirting and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L for 20mm thick granite (of any type) work (table rubbed and polished) in platforms/stair case/countertop including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including rounding off/curving the edges of granite stone & polishing including screed bed 20mm thick in cement mortar 1:6 complete all as specified and directed.

Taking down chowkhats with shutter (without taking off shutter from the frame) exc 1.5sqm but not exc 4sqm each complete all as specified and directed

Taking down chowkhats with shutter (without taking off shutter from the frame) not exc 1.5sqm each complete all as specified and directed

Taking down shutters of any description but exc 1sqm and not exc 2sqm each and refixing in same opening complete all as specified and directed.

Taking down chowkhats or frames exc 1.5sqm but not exc 4sqm each complete all as specified and directed.

S&F for pressed steel frames for doors size of frame105mmx60mm with one or more related including necessary fixing lugs, hinges lock strike plate etc, complete all as specified and directed.

S&F for pressed steel frames for doors size of frame125mmx60mm with one or more related including necessary fixing lugs, hinges lock strike plate etc, complete all as specified and directed.

M&L for PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in hold fast iron fixing and back filing of pressed steel door frame including necessary form work complete all as specified and directed.

S&F for framed work of rolled mild steel conforming to Fe-290 (GdeE165) as in doors or gates of angle or other section with gusset plates, rails, braces, etc, drilled for fixing of steel sheeting or other covering; doors etc to be prepared for hanging or sliding with and including either hooks & hinges or steel hanging door fittings (exclusive of steel sheeting, running rails & guides) and hanging, fastening & fixing complete all as specified and directed.

S&F for 35mm thick 2nd class hard wood plain framed, panelled shutter (two panel) with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F for 35mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); supplied and fitted to chowkats complete all as specified and directed.

S&F for 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F In repair 150mm floor door stopper overall length of cover plate, aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F for 150mm floor door stopper overall length of cover plate, aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F for small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like including all necessary labours, articles not exc 200 cu.cm each in 1st class hard wood complete all as specified and directed.

S&F for mild steel butt hinges of size 100mm, medium weight, cold rolled by either welding/screwing, complete all as specified and directed.

S&F for 300mm mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.

S&F for mild steel barrel tower bolt length 200mm, stove enamelled black with bright bolts complete all as specified and directed.

S&F for mild steel pressed handles length 150mm, oval type, stove enamelled black complete all as specified and directed.

M&L for preparation of new wooden based surfaces and applying two coats of synthetic enamel paint of any description, not otherwise described over 10cm width or girth over one coat of pink primer complete all as specified and directed.

M&L for preparation of old wooden surfaces and applying one coat of synthetic enamel paint of any description not otherwise described over 10cm width or girth complete all as specified and directed.

S&F for steel window with side hung shutter including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

S&F for steel ventilator with top hung shutter including hinges with steel peg stay, complete without glazing bars, complete all as specified and directed.

M&L for preparation of new steel surfaces and applying two coats of synthetic enemel painting of any description over a coat of red oxide primer not otherwise described over 10cm width or girth complete all as specified and directed.

Repair existing aluminium door and window shutters with/without taking down shutter from frame, opening out joints, taking out glass or panels of any description, replacing the corner piece wherever required, joining and assembling again, refixing the glass pane and panels by provision of new rubber neoprene packing complete all as specified and directed.

S&F for powder coating aluminium (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F for powder coating aluminium (minimum thickness of powder coating 50 micron) door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rabber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc, complete all as specified and directed.

S&F for powder coating aluminium (minimum thickness of powder coating 50 micron) window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.), locking arrangement complete all as specified and directed.

M&L in repair double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed.

S&F for aluminium chequered grills as on aluminium windows, weight not exc. 0.50 kg/sqm and fixed including taking down of old unservicable grill, complete all as specified and directed.

M&L for 12mm thick both sides prelaminated particle board, medium density, fixed with screws to frame work in cup board shutters, partitions, shelves complete all as specified and directed.

S&F for 4.8mm thick sheet glass, ordinary quality and in square exc 0.5sqm in each pane in any position complete all as specified and directed.

S&F for 3mm thick sheet glass, ordinary quality and in square exc 0.5sqm in each pane in any position complete all as specified and directed.

S&F in repair door closer hydraulically regulated, design No 3 universal type suitable for door shutter 851mm to 1000mm in width and of weight 61kg to 80kg each cast iron body complete all as specified and directed.

S&F for solid PVC door frame of size 50mm x 47mm made out of 5mm thick PVC sheet reinforced with mild steel square tube complete all as directed.

S&F for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as per specified and directed.

S&F for aluminum anodized ‘D’ type handles length 125mm complete all as specified and directed .

S&F 150mm aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F for 100mm aluminium polished butt hinges type B12 complete all as specified and directed.

Demolition of Brickwork or stone/boulders masonry built in cement mortar complete all as specified and directed.

M&L for brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

All as per item No 53 here-in-before but except brick complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Demolition of cement concrete in ground floor and paving not exc 15cm thickness (below or above ground level) and rubbish off the premises complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in floor finished surfaces fair and even to receive tile complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C2 (using 40mm grade stone aggregate) as in plinth protection/paving finished fair and even without using extra cement complete all as specified and directed.

Demolition of RCC of any description in any position not otherwise specially provided for (reinforcement cut as required to facilitate demolition) complete all as specified and directed.

M&L for providing reinforcement cement concrete 1:2:4 (using 20mm graded stone agg) as in slabs/ beams/column in floors balconies,canopies, desc slabs and the shelves and the like.

M&L for RCC chajjas 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in approved design complete all as specified and directed.

Use and waste of formwork to soffits of suspended slab such as roof slab, floor slab, landing and similar work not exc 200mm thick (Horizontal or sloping) flat in fair finished surfaces of concrete complete all as specified and directed.

Use and waste of formwork to cornices and mouldings of any shape in cross section and any girth in fair finished surfaces of concrete complete all as specified and directed.

Use and waste of formwork to edges of concrete flats, treads breaks in floor, window cills, concrete railing, openings in concrete walls, floor and roofs and similar works exc 5cm but not exc 10cm wide rough finish surface of concrete complete all as specified and directed.

Use and waste of formwork to edge of concrete flats, breaks in floors, opening in concrete walls, floors and roofs and side of RCC/PCC bands in walls ad similar works not exc 20cm thick, complete all as specified and directed.

S&F for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required including cranking bending and binding with mild steel (anneal) wire not less than 0.90mm dia, complete all as specified and directed.

S&F for mild steel TMT bars 8mm dia , cut to length, bent to shape required including cranking bending and binding with mild steel (anneal) wire not less than 0.90mm dia, complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc, laid dry or laid dry and pointed complete all as specified and directed.

M&L for coloured designer chequered cement concrete tiles 300mmX300mmX25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigments complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block ISI marked any shape and size confirming to IS 15658-2021 of 60mm thickness, M-35 Grade with grey cement and pigment complete all as specified and directed.

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate)as in foundation , filling and mass concrete complete all as specified and directed.

Dismantling of wall and ceiling or insulation boards/slabs /PVC panelling any thickness and in any position including frame grid and cover fillets and framework etc complete all as specified and directed.

M&L for Designer type gypsum ceiling board/mineral fibre board of size 595mmx595mmx7mm-8mm thick as in ceiling, fixed with screws on GI grid frame work of size 600mmx600mm, GI T-section of size 25mmx25mmx 1.25mm, GI L-section 25mmx25mmx1.25mm, hanging arrangements with roof with GI wire not less than 4.00mm dia, including applying two coats of distemper oil emulsion (of approve shade) after preparation of surface, including taking down existing ceiling board of any description complete all as specified and directed.

Taking down cement plaster on Brick or concrete surfaces incl racking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

M&L for rendering 12mm thick on brick work or concrete surface in CM 1:4 including finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 5mm thick in CM 1:3 on concrete surfaces on ceiling/facia/RCC Chhaja etc & finished even & smooth without using extra cement complete all as specified and directed.

M&L for rendering 10mm thick in CM 1:6 on fair faces of brick work or concrete surfaces and finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces and finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick with water proofing compound @3% weight of cement on brick work or concrete surfaces in cement mortar 1:4 including finishing the surface even and smooth without using extra cement complete all as specified and directed. Note:- Water Proofing compound shall be measure and paid seperately.

Supply only integral waterproofing compound complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying two coats of exterior acrylic emulsion (weather proof treatment), in camouflaging patterns, complete all as specified and directed.

Applying two coats of exterior acrylic emulsion (weather proof treatment), in camouflaging patterns , including preparation of old surfaces like brooming down or steel wire brushing scraping down smoke soot, moulds mass and efflorescent salt and trading oil and greasy spots complete all as specified and directed.

M&L for preparation of newely plastered ceiling surfaces and applying three coats of white washing complete all as specified and directed.

M&L for complete removal of existing treatment through mechanical scraper machine for any type of existing surface of walls/ceiling Complete all as specified and directed.

M&L for painting of treated surfaces to receive and applying two coats of distemper oil emulsion on surfaces of walls and ceiling including 1mm to 1.5mm thick birla/JK wall care putty to receive smooth finishes complete all as specified and directed.

M&L for painting of treated surfaces to receive and applying two coats of dry distemper on surfaces of walls and ceiling including 1mm to 1.5mm thick birla/JK wall care putty to receive smooth finishes complete all as specified and directed.

M&L for preparation of old plastered surfaces and applying one coat of synthetic enamel paint on decorated surfaces of walls/kerb stone complete all as specified and directed.

M&L preperation of new platered surface and applying two coats of cement base paint in camouflage pattern complete all as specified and directed.

M&L for preperation of new plastered surface of wall and applying two coat of oil bound distemper over a coat of clearwell also application of chalk whitting on platered surfaces complete all as specified and directed.

M&L for providing and injecting chemical emulsion for Post Constructional anti-termite treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement :2 coarse sand) to match the existing floors complete all as specified and directed.

M&L for providing and injecting chemical emulsion for Post Constructional anti-termite treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and directed.

M&L for post construction treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.50ltr /hole by drilling 6mm dia. Hole at a down ward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and directed.

Contract Amount shall be derived after deducting the amount of Schedule of Credit in General Summary on serial page No 17 of tender documents.

M/s Shubham Enterprises

SRI SAI CONSTRUCTION COMPANY