Providing view cutter at the boundary wall along the Turbhe Station, BRIT Vashi Complex, Navi Mumbai.

Amount

Providing, centering, shuttering Form work using PVC film faced plywood to get a neat form finish surface for all types of structures including necessary strutting, proping, staging, supports etc and deshuttering the same after the specified time all as per drawings, specifications and as directed by the Engineer-in-charge at all levels For Sub Structure

Providing and laying in position cement concrete of 1:3:6/ M-10 with minimum cement content 220 Kg/Cum (1 cement, 3 crushed sand, 6 graded stone aggregate of maximum size 20 mm) including consolidation, finishing, curing etc. complete as per specificationsand drawings but excluding the cost of Form work shuttering, centering Complete at all levels

Providing and laying in position Reinforced Cement Concrete (RCC) of grade M-30 using 20mm maximum size aggregates and crushed sand of approved quality including admixtures of approved brand and quality (plasticiser or super plasticiser) if required, including weigh batching, mechanical mixing, transporting, placing, vibrating, consolidation, finishing, curing etc. complete but excluding the cost of centering, shuttering and reinforcement complete as per specifications.

up to Plinth Level

Extra for RCC/PCC Using Ready Mix Concrete from outside project area including transporting and pumping from approved batching plants .

Providing Reinforcement for reinforced cement concrete at all levels including supplying, preparation of bar bending schedules,cutting, bending, transporting, fixing, tieing in position with 1.6 mm dia soft drawn annealed binding wire all labour charges, cost of cover blocks in specified grade of concrete etc. complete including cost of binding wire as per specifications and drawings. Note: Cover blocks shall be of same grade of concrete. Steel Supplied by the Contractor Using TMT bars of specified grades all dia bars. TMT bars to be supplied by the contractor manufactured by approved brands of BARC only Confirming to IS:1786

Providing Structural steel work in M.S Plain Plates and chequrred Plates for Embedded Parts, Trench Covers, Connection plates etc.including cutting, hoisting, fixing in position and applying a priming coat of approved zinc chromate steel primer etc.including cost of structural steel Plates, welding all labour charges etc. complete as per drawings and specifications. Steel Supplied by the Contractor Using materials manufactured by approved brands of BARC only Confirming to IS:2062

Providing and Painting two coats of synthetic enamel paint on Steel Surfaces of approved brand and manufacture to give an even shade without primer coat, including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge.

Providing, painting, Finishing walls with Premium Acrylic smooth exterior paint on sand face plaster / plain plaster & concrete surfaces with Silicone additives (APEX ULTIMA of Asian paints or equivalent approved make) of required shade over new/old work (Two coats applied @ minimum1.43 ltr / 10 sqm) over and including external cement primer including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Project Engineer. Note: Scraping of old painting and surface preperation are inclusive of this item. On Plain Plaster surfaces

Providing and fixing of 4 mm thick approved make and shade Aluminium Composite Metal Panel strip of 75 mm wide up to 3.00 meter height above RR wall of approved make cladding at different locations including soffits of over-hangs and including aluminium frame work of size 38 mm x38 mm sqaure tube as per the drawings to match the exsting system. The ACM panel composition strip shall be of 0.5 mm thick PVDF coated aluminium sheet + 3 mm thick low density polyethelene virgin resin core + 0.5 mm thick polyester (PVDF) coated Aluminium sheet, including required fastners, screws etc. all complete as per approved shop drawings and specification and direction of Engineer-In-Charge Note: The measutrement will be in sqm of strip and the gap between two strip will not be measured.

Providing, supplying, cutting, welding, fabricating, hoisting and fixing in position structural steel members like trusses, purlins, posts etc. using MS hollow / circular / square / rectangular tubular sections including applying a coat of Zinc chromate primer of approved make all as per specifications, drawings and as directed by the Engineer in charge.

Providing Structural steel work using angles, channels, joists and other sections, welded and / or bolted in built up sections for trusses , structural steel floors, frame works, monorails and other structures including supplying, cutting, welding, fabricating, hoisting, fixing in position, applying a priming coat of approved steel primer etc. complete all as per specifications, drawings and as directed by the Engineer in charge. Up to and including 300 mm Joists, 350 mm channels, and below sections using materials of approved manufacturers confirming to IS 2062. All test reports to be provided along with the supply of the materials

Supplying, stacking and laying of 230 mm thick rubble soling stones as under floor base including packing with smaller stone and compacting, ramming including spreading and consolidation of blinding material, moorum etc. complete all as per specifications and as directed by the Engineer-in-charge

Providing and fixing GI chain link fabric fencing Made of GI wire of dia 4 mm of required width in mesh size 50 x 50 mm including strengthening with 2mm dia wire or nuts, bolts and washers as requeid complete as per direction of Engineer-in-charge.

Fencing with RCC post placed at required distance, embedded in cement concrete blocks every 15th post, last but one end post and corner post shall be strutted on both sides and end post one side only, provided with horizontal lines and two diagonals of barbed wire 9.38 kg per 100 metres (min) between the two posts fitted and fixed with G.I. staples on wooden plugs or G.I. binding wire tied to 6 mm bar nibs fixed while casting the post etc. complete as directed by the Engineer-in-charge. (cost of RCC posts, struts, earth work and concrete to be paid for separetely) : Payment to be made per metre cost of total length of barbed wire used. With S.S. barbed wire 12 swg

Removing/dismantling chain link mesh from the existing chain link fencing including providing necessary scaffolding, removing G.I. hooks, nuts, bolts, washers, fixing rods etc. making into rolls, transporting the dismantled materials to the Divisional stores & stacking as per direction of Engineer-in-Charge.

Dismantling barbed wire / flexible wire rope in fencing including making rolls and stacking within 100 m lead

Providing and fixing Stainless steel concertina barbed tape coil of 600 mm dia. made from stainless steel ribbon tape of 0.5 mm thickness, 19 mm width stretching the coil to 9 m approximate, fixing the coil with clips between "Y" armed and MS angle posts 2.44 m high from ground level, including supplying and fixing SS galvanized clips etc. complete as per manufacturer's specification and including painting by dipping method the concrtina tape coil with two coats of synthetic enamel paint of approved shade and make over a coat of approved primer at fabrication shop, before bringing the material to the site and fixing in position etc. complete as directed by the Engineer-in-charge. 600/ 610 mm Dia Concertina coils

shoiab construction

SUNIL CONSTRUCTION

G-TECH CONSTRUCTION & FABRICATORS