Construction of 24 HC PC Quarters at Nacharam of CP Rachakonda Sub work Drilling of Bore well 2Nos and supplying and Fixing of Pump Sets 2 Nos at 24 HC PC Quarters at Nacharam of CP Rachakonda

DRILLING OF BORE WELL BY DOWN THE HOLE HAMMER DRILLING TO A FINISHED DIA OF 165MM O ( 6 1/2) IN ALL FORMATIONS SUITABLE FOR DOWN THE HOLE HAMMER DRILLING SUCH AS MEDUIM ROCKS TO HARD ROCKS FORMATION ETC AND REMAININF BORE TO SUIT INSERTION OF 175MM O PVC CASING PIPE, COUPLING, CPS AND OTHER RELEVANT MATERIALS REQUIRED UPTO THE DEPTH AS DIRECTED BY THE DEPARTMENT ( BUT EXCLUDING COST OF CASING PIPE, COUPLING, CAPS) AND TRANSPORTATION OF DRILLING MACHINE INCLUDING OF SUPPORTING VEHICLES FROM PLACE TO PLACE AND INCLUDING BORE DEVELOPMENT ( FLUSHING THE BORE WELL AT AN AVERAGE PRESSURE OF 100 PDI) COST OF YIELD CHARGES, TRUE CHARGES COST OF CONSUMABLES, TRANSPORTATION CHARGES OR OTHER CHARGES REQUIRED IN FIXING OF PIPES ASSEMBLING OF DEPTH AS STIPULATED IN THE TECHNICAL CONDITION OF PR DEPARTMENT AND THE ENTIRE WORK SHOULD BE CARRIED OUT AS PER THE IS 2800 PART I & III 1979. Bore -1 UPTO 120M DEPTH

Bore-2 Upto 120.00RM

SUPPLY AND FIXING OF 10" DIA UPVC CASING PIPE ( PRESSURE OF 6 KGS/CM2 CONFORMING TO IS 4985/1988) AS DIRECTED BY THE DEPARTMENT.

SUPPLY AND FIXING OF 7" DIA UPVC CASING PIPE ( PRESSURE OF 6 KGS/CM2 CONFORMING TO IS 4985/1988) AS DIRECTED BY THE DEPARTMENT.

SUPLLY AND FIXING OF PVC CAP SUITABLE FOR 7" DIA PVC CASING PIPE.

CHARGES FOR GEOLOGICAL INVESTIGATION

SUPPLY AND JOINT OF HDPE PIPE, 40 MM OD, 16.0KGS/CM2. ISI MAKE (AS PER SSR 2024-25) For Bore-1

SUPPLY AND JOINT OF HDPE PIPE, 40 MM OD, 16.0KGS/CM2. ISI MAKE (AS PER SSR 2024-25) For Bore-2

SUPPLY OF NON-RETURN VALVE, 32 MM ISI MAKE

SUPPLY AND TRANSPORTATION OF 1.00 HP 25 STAGE SINGLE PHASE ISI OPEN WELL SUBMERSIBLE MOTOR PUMPSET SUITABLE FOR 4" BORE WELL. MAKES: KIRLOSKAR / CROMPTON / TEXMO / CRI / KSB / ARYAN VARSHA

SUPPLY AND TRANSPORTATION OF 2.00 HP 25 STAGE SINGLE PHASE ISI SUBMERSIBLE MOTOR PUMPSET SUITABLE FOR 4" BORE WELL. MAKES: KIRLOSKAR / CROMPTON / TEXMO / CRI / KSB / ARYAN VARSHA

SUPPLYING AND FIXING OF D.O.L STARTER 250V,SINGLE PHASE,50HZ. WITH SHEET STEEL ENCLOUSER COMPRISING OF CONTRACTOR WITH BI-METTALIC RELAY WITH NECE SHEET STEELARY PUSH BUTTONS,ETC.,COMPLETE SUITABLE UPTO 10.00HP BUT EXCLUDING GST.MAKES:SEIMENS/LK (L&T)/BCH.

SUPPLY AND RUN OF 3 CORE 4.0SQMMFLAT COPPER CABLE OF ISI FOR SUBMERSIBLE MOTORS BUT EXCLUDING WITH ALL ACCESSORIES INCLUDING LABOUR CHARGES ETC.,COMPLETE BUT EXCLUDING GST.MAKE:POLYCAB/V-GUARD/GOLD MEDAL/ NAKODA.FOR 3 PUMP SETS

SUPPLY OF CLAMPS, BORE COVER, BENDS, BRASS NIPPLES FOR JOINTING HDPE PIPES.

PUMP SET ERECTION CHARGES

SUPPLY AND FIXING OF 34.90MM OD PIPE - SDR 13.5 ASHIRVAD / ASTRAL OR EQUIVALENT PREMIUM CPVC PIPES AND FITTINGS TO MEET THE REQUIREMENTS OF ASTM-D 2846 AND ARE PRODUCED IN CTS (COPPER TUBE SIZES 1/2" TO 2") ASHIRVAD FLOWGUARDS SDR 13.5 MADE FROM IDETICAL CPVC COMPOUNDS HAVING THE SAME PHYSICAL PROPERTIES FOR HOT AND COLD WATER (IS 15778-2007) INCLUDING COST AND CONVEYANCE OF PIPE & ITS FITTINGS AND ALL MATERIALS TO SITE, LABOUR CHARGES ETC., BUT EXCLUDING GST, COMPLETE FOR FINISHED ITEM OF WORK.

SUPPLY AND FIXING OF 32.00MM OD PIPE - SDR 13.5 ASHIRVAD / ASTRAL OR EQUIVALENT PREMIUM CPVC PIPES AND FITTINGS TO MEET THE REQUIREMENTS OF ASTM-D 2846 AND ARE PRODUCED IN CTS (COPPER TUBE SIZES 1/2" TO 2") ASHIRVAD FLOWGUARDS SDR 13.5 MADE FROM IDETICAL CPVC COMPOUNDS HAVING THE SAME PHYSICAL PROPERTIES FOR HOT AND COLD WATER (IS 15778-2007) INCLUDING COST AND CONVEYANCE OF PIPE & ITS FITTINGS AND ALL MATERIALS TO SITE, LABOUR CHARGES ETC., BUT EXCLUDING GST, COMPLETE FOR FINISHED ITEM OF WORK. For UG SUP

SUPPLY OF 32MM PPR BALL VALVE CONFORMING TO DIN STANDARDS 8077/8092

SUPPLY & APPLYING MELAMINE POLISH GLOSSY/ MATT FINISH TO THE WOOD WORKS DULY CLEANING THE SURFACE AND APPLYING EMERY PAPER, SAND THE WOOD WITH 180NO.,EMERY PAPER AND THEN WITH 320 NO., EMERY PAPER,CLEAN & WIFE OFF LOOSE DUST,APPLYING SUITABLE KNIFING PASTE FILLER/WOOD FILLER BY PUTTY KNIFE/MUSLIN PAD, AIR DRY FOR 2-3 HRS, SAND WITH 180 AND 320 NO.,EMERY PAPER,APPLY TWO COMPONENT WOOD SEALER, AIR DRY FOR 24 HRS,SAND WITH 320 NO EMERY PAPER ,APPLYING ONE COAT OF APPROVED SPRAYING THINNER(FOR SPRAYING)/ APPLYING ONE COAT OF APPROVED BRUSHING THINNER OR GENERAL PURPOSE THINNER (FOR BRUSHING) AND APPLY(EITHER WITH SPRAY OR BRUSH) TWO COATS OF APPROVED BRAND MELAMINE INCLUDING COST A& LABOUR CHARGES,EMERY PAPERS,COST OF THINNER & MELAMINE POLISH OF APPROVED BRANDS SUCH AS JENSON & NICHOLSON , ASIAN PAINTS,BERGER PAINTS OR EQUIVALENTETC., COMPLETE FOR FINISHED ITEM OF WORK. RATE APPROVED IN AGT.NO.MD/LS/TW-VIII/45/2024-25 DATE:20.01-2025.