PERIODICAL SERVICES TO CERTAIN BLDGS AND REPAIR REPLACEMENT OF WOODEN, STEEL AND ALUMINIUM JOINERY AT CERTAIN BLDGS AT ASTE AND SDI UNDER GE (AF) MARATHAHALLI

Amount

Preparation of old surfaces and applying one coat of white washing on Ceiling. Note : Preparation including brooming down or steel wire brushing scrapping down smoke soot moulds moss and efflorescent salts and trading oil and greasy spots, removing of nails, cracks making good holes by putty etc, spreading and removing coverings to doors, windows, floors fittings to protect them from splashes, washing floors, cleaning glass, joinery, fittings, drops, splashes, leaving premise clean and tidy etc. complete all as specified

All as per serial item No.1 above but applying one coat of white washing on wall.

All as per serial item No.1 above but applying one coat of oil bond distempering with emulsion on ceiling.

Applying one coat of oil bond distempering on walls including preparation existing wall brooming down or by steel wire brushing scrapping down smoke soot moulds moss and efflorescent salts and trading oil and greasy spots, removing of nails, cracks making good holes by putty etc, spreading and removing coverings to doors, windows, floors fittings to protect them from splashes, washing floors, cleaning glass, joinery, fittings, drops, splashes, leaving premise clean and tidy etc. complete all as specified

All as per serial item No.1 above but applying one coat of cement base paint on walls. NOTE: Painting work of the buildings and 1 over head tank to be done upto the height of 25m from floor level. Contractor shall quote the rate accordingly considering the suitable scaffolding/ladder. Rate for the provision of scaffolding deemed to be included in the quoted rates.

All as per serial item No.1 above but applying one coat of Plastic emulsion paint on walls.

Preparation of old painted surface of wood and wood based surface any description not otherwise described over 10cm width or girth including knotting and stopping and all preparation work required and applying one coat of synthetic enamel paint all as specified.

All as per serial item No.7 above but applying one coat of Synthetic varnish.

Preparation of old painted surface of steel surface any description not otherwise described over 10cm width or girth including knotting and stopping and all preparation work required and applying one coat of synthetic enamel paint all as specified.

Preparation of old painted surfaces of brick, stone, concrete, asbestos cement or plaster surfaces of any description, not otherwise described, over 10 cm girth or width not otherwise described and applying one coat of Synthetic enamel paint (Ordinary tint) complete all as specified.

Taking down Cement plaster including raking out joints hacking for key scrubbing down with water etc

Rendering rendering 10mm thick cement plaster in cement mortar 1:6 on fair faces of brick work or concrete surfaces and finishing the surface even & smooth without using extra cement

Rendering 15mm thick in patches in cement mortar in 1:4 on fare face of brick work or concrete surfaces even and smoothe without using extra cement.

M&L for preparation of new surface/undecorated surfaces of walls and applying two coats of Oil bound distemper over a coat of priming on plastered and other surfaces with alkali resistant priming paint including one coat of Birla white putty on plastered surfaces etc. complete all as specified.

M&L for preparation of new surface/undecorated surfaces of walls and applying two coats of Cement Base Paint of approved tint over a coat of priming on plastered and other surfaces with alkali resistant priming paint complete all as specified

Taking down chowkats or frame with shutter (without taking out shutter from the frame) not exceeding 1.50 sqm each all as specified and directed

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet used and edges will be painted to match with printed sheet including reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC `C’ channel having a PVC sheet strips of 20mm width stuck inside with solven cement for styles and plain colour PVC sheets for top rain lock rail and bottom rail on either side and as gap insert for top rail and bottom rails, paneling ofwood grain printed PVC sheet to be fitted in the MS frame welded/sealed to the styles and rails with suitable PVC sheet bedding and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawing complete

S&F in mild steel butt hinges of 75 mm size medium weight cold rolled by welding to existing frame complete all as specified and directed

S&F 125mm long Aluminium anodised barrel tower bolts of extruded section fixed to PVC door with screws complete all as specified.

S&F 125 mm long Aluminium anodised handles extruded section fixed to PVC door with screws complete all as specified.

Taking Down shutters of any description exc 1 Sqm but n.exc 2 Sqm each etc. complete all as specified.

S&F 2nd class HW 40mm thick factory made panelled shutters with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS-1003 (Pt-I)kiln seasoned and chemically pressure treated.

S&F Aluminium anodised bolts barrel tower bolts 200mm long of extruded section, complete all as directed by Engr-in-Charge.

S&F Aluminium handles 150mm size cast type anodised , complete all as directed by Engr-in-Charge.

Taking down chowkhats or frame exc 1.5 Sqm but n.exc 4 Sqm each with shutters (Without taking off shutters from the frames).

S&F powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.

S&F Powder Coated aluminium door shutters (minimum thickness of powder coating 50 micron) aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified. Note: Glass will be measured and paid seperately.

S & F Powder coated anodised alluminium window and ventilator shutters sliding type without sash bar, aluminium sections weighing 0.55 Kg/m including joining cleats glazing clips, rubber packing , anodised aluminium snap beading, screws etc. complete all as specified and as directed by Engr-in-Charge.

Provision of 5.5 mm thick tinted glass exc 0.5 sqm of each pane of superior quality fixed to alluminium frame works with rubber beadings Complete all as specified and as directed by Engr-in-Charge.

S&F for 12mm thick prelaminated particle board, fixed to aluminium framework, complete all as directed by Engr-in-Charge.

S&F stainless steel wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium beading, wire staples complete all as specified and directed.

S & F Anodised alluminium grill for windows and ventilator aluminium sections weighing 2.00 Kg/Sqm, including anodised aluminium snap beading, screws etc. complete all as specified and as directed by Engr-in-Charge.

Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers Complete all as specified and as directed by Engr-in-Charge.

S&F Aluminium (Extruded section body) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed, complete all as directed by Engr-in-Charge.

M&L for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed etc. complete.

S&F Floor door stopper 150mm length of cover plate aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in doors , complete all as specified and directed.

Taking down Wooden shutters of any description exc 1.00 sqm and n.exc 2.00 sqm each and refixing the same opening without damaging the door including cutting the door bottom for adjusting of height if required, etc complete all as specified and directed by Engineer-in-Charge.

Taking down shutter of aluminium door shutters exc 1.00 sqm and n exc 2.00 sqm each and refixing the same opening without damaging the door by adjusting the bottom of door adjusting of height if required, including material and labour for joining cleats glazing clips, rubber neoprene packing , handle, hinges, anodised aluminium snap, mortice lock, beading screws, bearings etc. complete all as specified and as directed by Engr-in-Charge.etc

S&F in repair of Laths/Locking plate of 1mm in rolling shutters including removal of existing broken laths in rolling shutters with opening of bottom locking plate and number of existing laths as and where to repair the borken laths etc. complete all as specified and as directed by Engr-in-Charge.etc.

Easing of exising rolling shutter and its machanisium up to its area up to 10 sqm i.e ball baring with or without removing the rolling shutter and re fix in the existing location after making operational in all purpose. Change of cost of sprting/anti choring rod/chain wheel/hand chain/Haspend staple or any other fitting required to make the operational rolling shutter is included in the coated rate. No extra shall be admissiable on that account. etc. complete all as specified and as directed by Engr-in-Charge.etc. Note : Change of laths and bottom locking plates will paid separately.

Easing of exising rolling shutter and its machanisium up to its area from 10 to 20 sqm i.e gare box, ball baring with or without removing the rolling shutter and re fix in the existing location after making operational in all purpose. Change of cost of sprting/anti choring rod/chain wheel/hand chain/Haspend staple or any other fitting required to make the operational rolling shutter is included in the coated rate. No extra shall be admissiable on that account. etc. complete all as specified and as directed by Engr-in-Charge.etc. Note : Change of laths and bottom locking plates will paid separately.

S & F in repairs aluminium handles 150mm size cast type anodised , complete all as directed by Engr-in-Charge.

S & F in repairs floor door stopper 150mm length of cover plate aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor , complete all as specified and directed.

S&F in repairs , Aluminium (Extruded section body) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed, complete all as directed by Engr-in-Charge.

M&L in repairs for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed including takingdown existing one etc complete all as specified and as directed by Engr-in-Charge.

S&F in repairs Aluminium Mortice lock of 4 levers in vertical type of size 100 mm complete all as specified and as directed by Engr-in-Charge.

S&F in repairs Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and as directed by Engr-in-Charge.

S&F in repairs Ball bearing for rolling shutters complete all as specified and as directed by Engr-in-Charge.

S&F in repair stainless steel wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and directed.

Hacking out old broken glass from metal frame of any thickness incl punching or drilling out old glazing pins/springs clips and providing and fixing new ones complete all as specified and as directed

S&F sheet glass ordinary quality 4mm thick in squares n.exc 0.50sqm in each pane for metal /wooden frames, complete all as directed by Engr-in-Charge.

S&F sheet glass ordinary quality 4mm thick in squares exc 0.50sqm in each pane for metal /wooden frames, complete all as directed by Engr-in-Charge.

S&F figured glass, pinhead type 4mm thick in squares n.exc 0.50sqm in each pane for metal /wooden frames , complete all as directed by Engr-in-Charge.

Dismantling of steel collapsible gate of any description complete all as specified.

S&F Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete

Taking Down rolling shutters of any description and any size each etc. complete all as specified.

S&F 1.25 mm Steel rolling shutters with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer erected in position as indicated, gear operated type with chain wheel and hand chain all as specified and directed.

S&F Ball bearings for rolling shutters complete all as specified and directed.

S&F Safety Lever Locks mild steel with 4 levers for rolling shutters, complete all as specified and directed by EIC.

Preparation of new/ painted surface of wood and wood based surface any description not otherwise described over 10cm width or girth including knotting and stopping and all preparation work required and applying two coat of synthetic enamel paint over a coat of Pink primer etc complete all as specified.

Preparation of new/ previously unpainted surface of steel surface any description not otherwise described over 10cm width or girth including knotting and stopping and all preparation work required and applying two coat of synthetic enamel paint over a coat of Pink primer etc complete all as specified.

docileworx (BID ID -3141900)

sri sai construction (BID ID -3142149)