200 YEAR SPECIAL FUND - Providing New Orinamental Tiles with Footpath and Grill work at Boat House Road (from Woodcock road junction to Boat House Gate) in UMC.

Amount

Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete

Plain Cement Concrete 1:4:8 (one cement, four sand and eight aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification

Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed - 10 m 2 (P & D)Data 38

Plain Cement concrete 1 : 2 : 4 (one cement, two sand and four aggregates) using 20mm ISS HBG metal including cost and conveyance of all materials and labour charges for mixing, laying, compacting and curing etc, complete as per SS

Supplying and fixing in position Cement based hydruali-cally pressed Anti-Skid tiles (pattern design) 20 mmthick in cement mortar 1:3- 20 mm thick & pointed with same colour of cement etc.,complete.

Supply and fixing of cast iron grill including transport charges etc.,

Supply and laying of 2 x 6 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good, except 4 x 16 sq.mm. PVC LTUG aluminium armoured cable TNEB SOR 2022-2023 SD 203

Supply and Decorative Column 3.8M height above the ground level made out of Gl, tubular pole 'T´ washed and primered. The Embellishments are cast in iron and fitted to the column by grubs screw fitting. The embellishments shall be sealed to the column. The pole base plate should be with 300 x 300 x 16 mm and the pole should be of two sections, 1000mm x 140mm dia, 3000mm x 76mm and suitable provision to mount luminaire on post top. The column should two coats of zinc primer applied above that it should be treated with two coats of polyeruthene paint. The column shall also be provided with flush door at the bottom with proper strengthening to the cutout of the door opening. A junction/ looping box with provision for mounting 32A heavy duty connector & MCB, but without connector & MCB. The internal wiring and suitable MCB also included in the scope of installation. CAT REF: Richmond pole/Gl/Base plate/3.8m

Supply of LED Heritage post Top Luminaire of 30 W. The frame is made up of stainiess steel and embellishments from cast aluminium covers. The optical compartment should be IP 66, which ensures internal cleanliness and thus long - term maintenance of photometric performance for street / Pedestrian area the optical compartment consists of 32 LEDS driven at 350mA photometric engine specifically dedicated to offering photometric flexibility and performance. Leds in neutral white (4000-4500K) should be equipped with special developed lenses, lensoflex, for proper road lighting photometry. Access to the optical compartment and Gear is obtained by loosening screws monted on base of top cover of luminaire. This allows top cover to be swivelled open on a hinge. The luminaire should be suitable to mount on post top on 3/4" male threaded top section, secured by a counter nut.

S. NAGARAJ