SPL REPAIR TO BLDG No P68 13 BAY GARAGE, P71 MT OFFICE,P-83 03 TON GARAGE AND WASHING PLATFORM AND BLDG NO 134 PET CT SCAN AT AHRR UNDER GE EM RR HOSP

Amount

Demolition of brick work or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facing, dressed stone work and precast concrete articles all as specified.

M&L for brick work with sub class 'B' Bricks (using old size bricks) straight or curved on plan exc 6m mean radius built in CM 1:6, complete all as specified and as directed.

Taking down cement plaster of any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified & directed.

M&L for 15mm thick rendering on fair faces of brick or concrete surfaces in cement mortar 1:6, finished even and fair without using extra cement, complete all as specified & directed.

M&L for 15mm thick rendering on fair faces of brick or concrete surfaces in cement mortar 1:4, finished even and fair without using extra cement, complete all as specified & directed.

M&L for 5mm thick rendering on concrete ceiling surfaces in cement mortar 1:3, finished the surface even and fair, complete all as specified and directed.

M&L for applying two coats of cement base wall care putty 1 to 1.5mm thick on plastered surface of new/old wall and making the surface even & smooth for receiving distemper/ paint of any description, complete all as specified & directed.

M&L for applying two coats of cement base wall care putty 1 to 1.5mm thick on plastered/unplasterd surface of new/old ceiling and making the surface even & smooth for receiving distemper / paint of any description, complete all as specified & directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper, complete all as specified & directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of exterior grade weather proof paint over a coat of weather resistant acrylic primer, complete all as specified and directed.

M&L for preparation of newly plastered surfaces of ceiling and applying two coats of oil bound distemper, complete all as specified and as directed.

M&L for preparation of new plastered surfaces of ceiling and applying two coats of white wash, complete all as specified and directed.

M&L for complete removal of existing treatment on old plastered surfaces of walls and applying two coats of white wash, complete all as specified and directed.

M&L for complete removal of existing treatment on old plastered surfaces of ceiling and applying two coats of white wash, complete all as specified and directed.

M&L for complete removal of existing treatment on old plastered surfaces of walls and applying two coats of oil bound distemper, complete all as specified & directed.

M&L for complete removal of existing treatment on old plastered surfaces of walls and applying two coats of exterior grade weather proof paint, complete all as specified and directed.

M&L for complete removal of existing treatment on old plastered surfaces of ceiling and applying two coats of oil bound distemper, complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (including backing) and rubbish off the premises, complete all as specified & directed.

M&L 15mm thick screed bed or bedding layer in cement mortar (1:6) for laying floor finishes, complete all as specified & directed.

M&L 10 mm thick screed bed or bedding layer in cement mortar (1:4) to receive wall tiles, complete all as specified & directed.

M&L for vitrified ceramic coloured tiles 8 to 9mm thick (square/ rectangular) polished of light shade, area of each tiles exceeding 0.18 sqm and not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified.

M&L for vitrified ceramic coloured tiles 8 to 9mm thick (square/ rectangular) polished of light shade, area of each tiles exceeding 0.18 sqm and not exceeding 0.36 sqm, in wall etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0. 06sqm but not exceeding 0.11 sqm in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match, complete all as specified & directed.

M&L for coloured glazed ceramic wall tiles as in vertical surfaces of size 450 mm x 300 mm x 7 to 8 mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match, complete all as specified & directed.

Taking down chowkats or frames including shutter (without taking off shutters from the frame) area not exc 1.50 Sqm each, complete all as specified.

Taking down chowkats or frames including shutter (without taking off shutters from the frame) area exc 1.50 Sqm but n.exc 4.00 sqm each, complete all as specified.

S&F, aluminium powder coated chowkhats/frame with rebate complete frame all as specified and directed.

Anodised aluminium door shutters,size 85mmx44.45x1.5mm 3mm thick ACP sheet with aluminium beading aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified all as specified and as directed. (Cost of sheet glass Plain / frosted / ACP Sheet shall be measured and paid seprately )

Supply Only for 5.5 mm thick plain glass fixed with beading in aluminium frame all as specified.

Supply only 3mm thick aluminium composite panel (ACP Sheet) to aluminium frame all as specified.

M&L for preparation of new or previously untreated steel and iron surfaces and applying two coats of synthetic enamel paint of any description over 10cm width or girth over a coat of red oxide primer, complete all as specified and directed.

M&L for preparation of old steel and iron surfaces and applying two coats of synthetic enamel paint of any description over 10cm width or girth complete all as specified and directed.

Supplying, fabricating & fixing aluminium powder coated glazed three track sliding window of frame 92mm x 31.75mm x 1.50mm and sliding shutter of section 40mm x 18mm x 0.91mm thick including 4mm thick sheet glass, ordinary quality exceeding 0.50 Sqm in each pane, in two track shutter and in one track stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, all fittings such as aluminium handle of size 100mm and locking arrangement with each moving leaf, complete all as specified & directed.

S&F aluminium Deco grill with powder coating (minimum thickness of powder coating 50 micron), 7.5 mm size DG-102, fixed to E/H frames, 1.5mm thick, bar size 6.2mm and 7.5mm thick in required sizes, complete all as specified and directed.

S&F aluminium ventilator shutters with powder coating (minimum thickness of powder coating 50 micron) of any colour, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.), hinges type B-21, 100mm long (2 no.), suitable handle (1 no.), complete all as specified

Supply only glass pin headed type 4mm thick n ex 0.5 Sqm each all as specified and directed.

S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick moulded PVC colored sheet on the front face & 2mm plain colour PVC sheet on back face with particle board core, supplying & fixing in frame at site as per specification & drawing, complete all as specified and directed.

S&F Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life)

S&F 100 mm long butt hinges, medium weight, cold rolled mild steel and fixed, complete all as specified.

S&F 150 mm long, aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F 125mm size extruded aluminium alloy handles, fabricated type, anodised, complete all as specified and directed.

S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor of overall length 140mm, complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connections, complete all as specified & directed.

S&F 15 mm bore tubes, 'medium grade', galvanised, with all fitting; (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs, unions etc) and fixed to wall / ceiling with clips, wall hooks, wooden plugs or laid in floors, complete all as specified.

Dismantling of PVC rainwater pipes/ taking out from the floor (any size or pattern), including all fittings, heads, shoes, bends, swan necks etc, complete all as specified & directed.

S&F 150 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls, with PVC clamp, all as specified.

S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or floors, complete all as specified & directed.

S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or floors, complete all as specified & directed.

S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls, complete all as specified & directed.

S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls, complete all as specified & directed.

M&L for PVC floor trap of 75mm dia of outlet, plain with grating including jointing with solvent cement, including embedding with PCC 1:2:4 type B-1, complete all as specified & directed.

S&F 150mm bore PVC (SWR) bends any radius, complete all as specified & directed.

S&F 110mm bore PVC (SWR) bends any radius, complete all as specified & directed.

S&F 75mm bore PVC (SWR) bends any radius, complete all as specified & directed.

S&F 75mm bore PVC (SWR) vent cowl, complete all as specified & directed.

S&F in repair white vitreous china wash hand basin (flat back) of size 550 x 400 mm fixed on and including new brackets complete including 32 mm size brass chromium plated waste coupling, PVC waste pipe etc, complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), complete all as specified & directed.

S&F in repairs plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, complete all as specified & directed.

S&F in repairs PVC low level flushing cistern, valve less, Syphonic action type, double push bottom, 10 litres capacity with inlet, ball valve float and handle with and including brackets & PVC bend pipe 32 mm dia of required length and making connection complete all as specified.

S&F in repairs bib taps, cast copper alloy, fancy type, with crutch or butterfly handle, chromium plated, screwed down, screwed for iron pipe or for brass ferrule of 15mm bore, complete all as specified & directed.

S&F in repairs two way bib cock chromium plated for fixing with flusing cistern/ jet spray/ health faucet etc, complete all as specified & directed.

S&F in repairs stop cock/ angle valve, cast copper alloy, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of 15mm bore, complete all as specified & directed.

S&F in repairs two way angle cock chromium plated for fixing with flusing cistern/ jet spray/ health faucet etc, complete all as specified & directed.

S&F in repairs PVC connections 15 mm size with PTMT nuts of length 600mm, all as specified & directed.

S&F in repairs soap dish, brass CP any type, fixed to plugs with chromium plated brass screws, complete all as specified and directed by Engineer-in-Charge.

S&F in repairs toilet paper holder of brass, cromium plated fixed to walls with chromium plated (CP) brass screws, complete all as specified.

S&F in repairs CP shower roses with CP Arms, 15mm bore, complete all as specified and directed.

S&F in repairs corner glass shelf with bracket and fixing accessories, complete in all respect as specified.

S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specified & directed.

S&F in repairs brass CP sink mixture wall mounted of 15mm bore dia, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, complete all as specified and directed

S&F in repair of 2-in-1 wall mixer with provision for overhead Shower with 115mm long bend pipe on upperside,with built in non return valve connecting legs & wall flanges made of cast copper alloy, chromium plated fancy type, complete all as specified and directed .

S&F waste coupling of PTMT (half or full threaded), minimum weight 60gms, suitable for discharge pipe of 40mm bore dia, complete all as specified & directed.all as specified.

Supply and fix in repair 1000 litres capacity double layer, rotational molded, polythene water storage tank (cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 20 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe, complete all as specified and directed.

Dismantling brick tiles or terracing tiles single layer on roofs, complete all as specified directed.

Demolition of mud/ mud phuska in roofs any thickness, including plastering and leaping if any and cleaning the roof surfaces with wire brushes and removal of mud /mud phuska to a distance exc 250 M and n exc 500 M, complete all as specified directed.

Demolition of un-reinforced cement concrete in ground floors and pavings in any position thickness. (Below or above ground level) and removing rubbish off premisses n exc 500 m complete all as specified

M/L PCC 1:3:6 type C-2 (40 mm graded stone agg) as in plinth protection finished even & smooth without using of extra cement 50 mm thick,laid in alternate panel n.exc 2 sqm each and filling with bituman complete all as specified

M & L for PCC (1:4:8) type D-2 (40mm graded aggregate), 75 mm thick as in sub base etc all as specified .

Sand cushioning for laying interlocking tiles complete all as specified and directed.

M & L for machine pressed colored with glossy finished precast concrete inter locking paver block of approved shape and size of 80mm thick, minimun strength of concrete M-40 grade with out correction factor for camparring, made in rubber moulds with scratch proof lacquer coating on top surface,with gray cement and pigment laid in path/hard standing complete all as specified and directed.

M & L for concrete bed to drain pipes including packing under and hunching against the sides of pipe in cement concrete 1:3:6 (type c-2) using 40mm graded aggregate after they are laid tested in bore of pipe 200mm.

M&L for 200mm bore RCC pipe class NP-2 laid in trenches and jointed with cement joint and tested complete all as specified and directed.

M&L Precast cement concrete type B1 (1:2:4) using 20 mm graded aggregate set in CM(1:4) in landings, cover slabs chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces

M & L for TMT bars 10mm dia and over cut to length bent to shape required including cranking bending and binding with and including MS wire (anneated) not less than 0.9mm dia complete all as specified.

Extra for forming fair finished drain or channel upto 300mm girth tn cement concrete using extra cement including forms moulds etc

M&L for PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation, filling and mass concrete etc complete all as specified and directed.

Excavation in treches n.exc 1.50 m in wide and n.exc 1.50m depth for foundation and getting out in hard rock using pneumatic concrete breakers chisels wdges etc(blasting prohibited).

Dismantling mild steel work of any description not otherwise provided for by cutting the rivets or by gas cutting

S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks & similar work conforming to Fe 290-0 Gde E-165

M&L Precast cement concrete type B0 (1:2:4) using 12.5 mm graded aggregate set in CM(1:4) louvres and jallies, 45mm thick (measured solid), including all mouldings but excluding frame

M&L PCC in lintels upto 1.5 m clear span, cills, steps; seismic & other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded for chamfered angles and throating, as directed type C1 (1:3:6) using 20 mm graded aggregate

Demolition of existing water proofing treatment all as directed & specified and removing rubbish exc 250m and cleaned the roof surface completed all as specified and directed by EIC

M&L for cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) as in roof padding including finished even & smooth without using extra cement, complete all as specified and directed.

M&L for priming roof surfaces and applying water proofing treatment over roof including preparation & cleaning of roof surface comprising of the following complete all as specified & as directed:- (a) Applying oil bound bituminous primer at the rate of 0.4 Ltrs/Sqm as per IS 3384-1986 on prepared surfaces. Surface shall be kept free till the moment, the primer is impregnated and the solvent oil in primer is evaporated. (b) M&L for applying one coat of hot straight run bitumen @ 1.2 Kg/sqm of grade 85/25 confirming to IS , complete all as specified & directed. (c) M&L for laying 3 mm thick APP polymeric water proofing membrane of weight not less than 3.6 kg/sqm, black finish reinforced with non woven polyester matt, with a thermo fusible finish, torching overlaps with a propane or a butane gas torch, with a overlap of 75 mm at sides and 100 mm at the ends and sealing including applying a coat of cold emulsion bituminous primer, all as per manufacturer's instruction including preparation of surface. Note: Water proofing treatment shall be got carried out by the manufacturer or their authorised applicators. Contractor shall give 10 years guarantee for effectiveness of water proofing treatment. 2.5% of workdone amount of this items shall be retained from the contractor payment for a period of 10 years reckoned from date of physical completion of the work or in lieu contractor may deposit bank FDR for the said tory for 10 years which shall be released by GE on the expiry of satisfactory completion fo 10 years period, complete all as specified and dircted.

Returning filling in, including spreading, leveling, watering and well ramming in layer not exceeding 25 cm in each layer.

Removing excavated material (soil) exc 250m but n exc 500m where directed at a level not exc 1.50m above the stating point.

Demolition of RCC Roofs, floors & any description, beams staircases, landing, chajjas, & similar suspended work Cement concrete (reinforced)

M&L RCC type B1 (1:2:4) using 20 mm graded aggregate in Slabs supported on walls, beams and columns in floors, roofs, landings, blaconies, canopies, deck slabs and in shelves and the like

Formwork to sides & soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors & beams, etc. Rough finished surfaces of concrete flat

Taking down carefully unserviceable of aluminium point wiring complete except for ceiling or where not feasible fan/plug/bell but including fittings such as switches, ceiling rose, pendants, regulator etc. and making good disturbed surface to match with the existing surface of roof/ wall/ floor by applying putty and applying colour/ white wash finish complete all as specified and directed.

M & L for point wiring concealed type with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable connected to common earth and earth dolly with suitable copper lugs drawing into and including rigid non-metallic PVC surface conduit of 20mm dia or higher, medium grade complete with all PVC conduit accessories, GI metal flush box of 1.60 mm thick suitable for modular / conventional switches / sockets / fan regulators with cover plates, blanking plates, brass screws, cup washers etc including all cutting / chases etc in walls and making good to the disturbed surfaces to match the existing complete all as specified and directed for the followings :- Note - All accessories likes modular top cover plate/ hylum sheet cover plate, Metal flush box, screws etc as applicable will be included in quoted rates. Note : The metal box, cover plates and blanking plates shall be same make of switch/ sockets

One light/fan/bell/exhaust fan point controlled by one switch.

One 3 Pin socket outlet 5 Amps on Independent board.

One 3 Pin socket outlet 5 Amps on same board.

All as per srl item No. 102 here-in-before but with 2.5 sq mm FRLS copper wire with 2.5 Sqmm FRLS copper earth wire for 15 Amp power point.

Material and labour for point wiring complete with 1.5 Sq mm (nominal area) FRLS, PVC insulated, un-sheathed and stranded copper conductor cable ISI marked, in existing conduit including 1.5 Sq mm (nominal area) FRLS, PVC insulated, un-sheathed and stranded copper conductor cable ISI marked as earth wire, connecting to common earth dolly with thimble, including modular MS sunken box, modular white cover plate with frame, blanking plate etc and making good to the disturbed surfaces to match the existing complete all as specified and directed for one light / bell point/exhaust point controlled by one, one way switch 06 Amps complete all as directed. Note - All accessories likes modular top cover plate/ hylum sheet cover plate, Metal flush box, screws, as applicable will be included in quoted rates.

All as per srl item No. 104 here in before but point wiring for one socket outet point 3 pin 5 amps on the independent board.

All as per srl item No. 104 here in before but point wiring for one socket outet point 3 pin 5 amps on the same board.

All as per srl item no. 104 here-in-before but with 2.5 sq mm FRLS copper wire with 2.5 Sqmm FRLS copper earth wire for 3/5 pin 15 Amp power point on Independent board.

S & F Modular Switch 1 way 16 A, 1 Module (IP-20) Make : Havells/ Murano Super Soft white, Lergrand/Myrius classic white, Philips/Anti-Bacterial Range (white)

S & F Modular Socket 6 / 16 A - 2/3 Pin combined 2 module (IP-20)Make : Havells/ Murano Super Soft white, Lergrand/Myrius classic white, Philips/Anti-Bacterial Range (white)

S & F Modular Switch 1 way 6 /10 A, 1 Module (IP-20)Make : Havells/ Murano Super Soft white, Lergrand/Myrius classic white, Philips/Anti-Bacterial Range (white)

S & F Modular Socket 6 / 10 A - 2 / 3 Pin combined 2 module (IP-20) Make : Havells/ Murano Super Soft white, Lergrand/Myrius classic white, Philips/Anti-Bacterial Range (white)

S & F Modular fan regulator step type, 120W 2 Module (IP-20) Make : Havells/ Murano Super Soft white, Lergrand/Myrius classic white, Philips/Anti-Bacterial Range (white)

S & F of Ceiling rose surface Polycarbonate type with three terminals 240 Volts complete all as specified and directed.Make : Havells/ Murano Super Soft white, Lergrand/Myrius classic white, Philips/Anti-Bacterial Range (white)

S & F in replacement of Modular AC Box, power socket with top 240 Volts AC complete with one SP MCB single pole 20 Amps concealed/ flush to wall surface complete all as specified and directed. Make : Havells/ Murano Super Soft white, Lergrand/Myrius classic white, Philips/Anti-Bacterial Range (white)

S&F in replacement surface/wall mounted 20W LED batten. Luminaire made up of extruded alumimum housin with PC diffuser. The luminiare should be with IP40 from dust. The LEDs used should have CRI≥80 and CRT 6500K. Luminaire system efficancy of ≥120 lumen/ watt. The electronic driver used shall have a power factor≥0.95. Fixture must have voltage range protection from 140-270V alongwith inbuilt surge protection of min 2.5KV. The luminaire shall pass insulation resistance test @≥2MΩ. The luminaire working Temp range should be from 0⁰ to 50⁰C. The luminaire shall pass eletric strength test. The LED luminaire & it's driver both should be BIS registered & shall be of the same make/manufacturer as that of LED luminaires. Manufacturer shall have inhouse lab approved by NABL as per 2019 standards.

S & F in replacement of LED light fitting mirror type with high output diffuser, 10 watt 220 V, AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F in replacement surface/wall mounted 10W LED batten. Luminaire made up of extruded alumimum housin with PC diffuser. The luminiare should be with IP40 from dust. The LEDs used should have CRI≥80 and CRT 6500K. Luminaire system efficancy of ≥120 lumen/ watt. The electronic driver used shall have a power factor≥0.95. Fixture must have voltage range protection from 140-270V alongwith inbuilt surge protection of min 2.5KV. The luminaire shall pass insulation resistance test @≥2MΩ. The luminaire working Temp range should be from 0⁰ to 50⁰C. The luminaire shall pass eletric strength test. The LED luminaire & it's driver both should be BIS registered & shall be of the same make/manufacturer as that of LED luminaires. Manufacturer shall have inhouse lab approved by NABL as per 2019 standards.

Supply and fixing post top lantern LED type 20 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete as specified and directed.

S & F in replacement of LED street / security light fittings 35/36 Watt with day and night sensor available,high pressure die cast aluminium housing, IP 65 CCT 4000-6500K with CRI>80, PF>0.95, an operating voltage range of 140-270V complete all as specified and directed.

Taking down unserviceable sub main wiring of aluminium any type with earth wire and making good disturbed surfaces of wall/ floor or roof etc and applying putty complete all as specified and directed.

Material and labour for Sub main wiring with 2 run of 4 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in and including PVC conduit with wall thickness 1.6mm thick and including 4 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB / Panel to sub DB complete all as directed. Note : 1. The two run of 4 Sqmm wire, one run of 4 Sqmm wire and 1 mtr PVC conduit pipe will be measured as one unit. 2. Cutting chases required for sub main wiring shall be finished with cement mortar 1:4 and surface shall be matched with existing shade of surface shall be deemed to be included in the unit rate quoted by the contractor.

All as per item No 121 here in before but sub main wiring 2 run of 6 Sqmm (nominal area) FRLS, PVC insulated, unsheated and stranded copper conductor cable ISI marked.

S & F in replacement MCB, SP, 6 to 32 Amps capacity, 240V, B Curve type, 10kA, single pole with over load and short circuit protection complete all as specified and directed

S & F in replacement MCB, SP, 40 to 63 Amps capacity, 240V, B Curve type, 10kA, single pole with over load and short circuit protection complete all as specified and directed

S & F in replacement MCB, SPN, 40 to 63 Amps capacity, 240V, B Curve type, 10kA, single pole with over load and short circuit protection complete all as specified and directed

S & F in replacement MCCB, 415 Volt, 16kA, 4 pole, 125 Amp capacity with over load and short circuit protection complete all as specified and directed

S & F in replacement Distribution Board double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, surface/recess mounting, VTPN 8 way, 415 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCCBs / MCBs and isolators etc and making all necessary connections complete all as specified and directed.

S & F in replacement Distribution Board double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, surface/recess mounting, SPN 12 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of RCCBs / MCBs and isolators etc and making all necessary connections complete all as directed.

S & F in replacement Distribution Board double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, surface/recess mounting, SPN 4 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of RCCBs / MCBs and isolators etc and making all necessary connections complete all as directed.

Taking down carefully ceiling / exhaust fan of any size, sealing cable end, dismantling blades & removing fan and blades to store complete all as directed.

Hanging only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan complete all as directed

Painting of ceiling/Exhaust fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc complete all as directed

Fixing only exhaust fan and connecting up including provision of cable from ceiling rose/connector to fan all as directed.

M & L Earthing complete with galvanised steel earth plate electrode 600 x 600 x 6.3 mm thick buried directly in ground earth pit not less than 2.25 mtr deep below ground level connected with earthing lead of 4mm dia galvanised iron or steel wire all by means of nuts and bolt check nuts and washers of galvanised iron sheet all as shown in electrical plate Nos 5 of SSR Part - I and connected to and including earthing test point complete including testing filling of adequate quantity of charcoal dust and common salt including refilling earth and removal of surplus soil up to 50 mtrs PCC 1:3:6 type CI chamber precast RCC cover 40 mm thick reinforced with 6 mm dia MS bar 3 Nos both way with handle made but at 6 mm dia MS bar water pipe with wire mesh and connecting testing etc complete all as specified and directed.

S&L XLPE insulated, screened, PVC bedded, galvanised stee strip or wire armoured , electric power cable (heavy duty) w, 1100 V grade ith aluminium conductorof 50 sqm , 3.5 core complete all as specified and directed.

S&L XLPE insulated, screened, PVC bedded, galvanised stee strip or wire armoured , electric power cable (heavy duty) w, 1100 V grade ith aluminium conductorof 25 sqm , 4 core complete all as specified and directed.

S&F GI tubing light grade 80mm dia with all fittings laid in trenches/fixed on wall/ceiling including dismantling of old pipe etc.

Excavation in trenches not exe 1.5m depth and not exe 1.5m wide in Soft/loose soil and getting out complete as specified and directed

M & L for road cutting /hard standing for laying of cable and re making good the same to match the existing surface complete all as directed by Engr incharge.

Supply and spread river sand for cable protection 8cm under the cable and 15cm above the cable in trench and get the thick layer of 18cm after ramming.

Supplying laying, brick sub class 'B' common burnt laid in trenches for cable protection complete all as specified and directed.

Returning, filling in including spreading, leveling, watering and well ramming in layers not exe.25cm at a level complete all as specified and directed.

Removal of surplus soil to a distance not exe 50m and depositing where directed at a level not exe1.5m above the starting point complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing and refixing the same as per exiting floor tiles complete all as specified and directed

Description of Work / Item(s)

Amount

Taking down cement plaster of any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified.

M&L for 15mm thick rendering on brick or concrete wall surfaces in cement mortar 1:6, finished the surface fair and even, complete all as specified.

M&L for 15mm thick rendering on brick or concrete wall surfaces in cement mortar 1:4, finished the surface fair and even, complete all as specified.

M&L for applying 1 to 2mm thick cement base wall care putty on plastered surface of new/old wall and making the surface even & smooth for receiving distemper / paint of any description, complete all as specified & directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of plastic emulsion paint, complete all as specified & directed. Note: Wall care putty where ever directed will be applied and will be measured & paid separately.

M&L for complete removel of old treatement on plastered surfaces of exteranal wall and applying two coat texture wall coating raised or recessed by spray gun (colour,design & pattern as approved) including preparation of surface and making good surrounding surfaces complete all as specified and directed.

M&L for complete removal of old existing treatment of old plastered or unplastered surfaces of walls by washing, rubbing down and stopping of painted surfaces and applying two coats of plastic emulsion paint, complete all as specified & directed. Note: Wall care putty where ever directed will be applied and will be measured & paid separately.

M&L for preparation of old decorated plastered surfaces of walls and applying two coats of oil bound distemper, complete all as specified and directed. Note: Wall care putty where ever directed will be applied and will be measured & paid separately.

M&L for preparation of old plastered surfaces of walls and applying two coats of anti fungal acrylic emulsion exterior grade weather proof paint , complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (including backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified & directed.

M&L 15mm thick screed bed or bedding layer in cement mortar (1:6) for laying floor finishes, complete all as specified & directed.

M&L 10 mm thick rendering as backing coat in cement mortar (1:4) to receive wall tiles, complete all as specified & directed.

M&L for vitrified ceramic coloured tiles 8-9 mm thick (square/ rectangular) polished of light shade, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified.

M&L for vitrified ceramic coloured tiles 8-9 mm thick (square/ rectangular) polished of light shade, area of each tiles not exceeding 0.36 sqm, in skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match, complete all as specified & directed.

M&L for coloured glazed ceramic wall tiles as in vertical surfaces of size 600 mm x 300 mm x 7 to 8 mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match, complete all as specified & directed.

Demolition of stone slabs or tiles of any description or thickness in any position laid, bedded and pointed in any mortar, complete all as specified & directed.

M&L for 16-18mm thick granite of any type (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2), using marble dust with admixture of pigment to match with shade of granite including 10mm thick screed bed or bedding layer in CM 1:4, complete all as specified & directed by Engr-in-Charge.

Taking down chowkats or frames including shutter (without taking off shutters from the frame) area not exc 1.50 Sqm each, complete all as specified.

Taking down chowkats or frames including shutter (without taking off shutters from the frame) area exc 1.50 sqm but n.exc 4.00 sqm each, complete all as specified and directed.

M&L for plain II class HW solid straight chowkhat and frames, wrought framed rebate on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed by Engineer-in-charge

S&F 35mm thick flush shutters, solid core construction, with particle board core and both faces are covered with decorative face veneer with lipping/ frame to match including arrangements for vision panels or peepholes, square or rectangular including lipping (supplying and fixing of glass measured separately), complete all as specified and directed.

S&F stainless steel butt hinges 100 mm long, medium weight and fixed, complete all as specified.

S&F 150 mm long stainless stell tower bolts of extruded section and fixed, complete all as specified.

S&F stainless steel handle 300mm long fixed to wooden door with and including all fixing accessories i.e. bolt, washer, adhesive etc, complete all as specifed and directed.

S&F 300 mm long stainless steel sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cast and fixing bolts and sliding bolts, complete all as specified.

M&L for french polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats, complete all as specified and directed.

Supplying, fabricating & fixing in repairs aluminium door shutters with powder coating (minimum thickness of powder coating 50 micron), vertical stile of door shutter of size 85mm x 44.45mm x 1.5mm thick, top, middle and bottom rail of size 85mm x 44.45mm x 1.5mm thick and fixing plain/ tinted sheet glass or ACP sheet with aluminium beading and rubber gasket/ beading as directed. One mortice lock for alumium door (each) and three nos aluminium hinges of size 100mm and two alumium tower bolts of 150mm size for each door fixed with rawl plug includimg rectification of floor/ wall to match the existing surface, complete all as specified and directed by Engr-in-Charge. Note: Cost of sheet glass/ ACP sheet shall be measured and paid seperately).

Supply only for 5.5mm thick plain glass fixed with beading in aluminium frame, complete all as specified.

Supply only 3mm thick aluminium composite panel (ACP) sheet including necessary clips, rubber packing and aluminium beading, complete all as specified.

S&F Aluminium window as per TD drawing No CEDZ/TD-316 with following specifications: (i) Outer frame of size 40mmx114mm with 1.3mm thickness, corner 45 degree cut & aluminium welded (ii) Center mullion of size 40mmx65mm (iii) Welded shutter (02 Nos) of size 40mmx60mmx1.3mm thickness 45 degree cut mechanically joint with 6mm allen key bolt clamp with 5mm clear glass both side EPDM rubber gasket metal body hand lever type single point lock, aluminium kobra hinges 02 Nos per shutter (iv) 12mm SS 202 grade round bar (v) Welded wire mesh shutter (02 Nos) of size 40mmx18mmx1.3mm thickness 45 degree cut with 0.45mm nominal dia of SS wire mesh, SS 75mm long hinges & PVC magnet, (vi) Entire window shall be powder coated with pure polyster coat of any shade as approved by GE. (vii) Window shall have provision for installation of window AC/Desert cooler and provision of window glasss shutter, wire mesh grill and necessary fittings and locking arrangements for subject portion will be modified as per ground requirement during the execution as per dirn of Engr-in-Charge. (viii) Window shall be installed with silicone, complete all as specified and directed by Engr-in-Charge.

S&F Aluminium window as per TD drawing No CEDZ/TD-316 with following specifications: (i) Outer frame of size 40mmx114mm with 1.3mm thickness, corner 45 degree cut & aluminium welded (ii) Center mullion of size 40mmx65mm (iii) Welded shutter (02 Nos) of size 40mmx60mmx1.3mm thickness 45 degree cut mechanically joint with 6mm allen key bolt clamp with 5mm clear glass both side EPDM rubber gasket metal body hand lever type single point lock, aluminium kobra hinges 02 Nos per shutter (iv) 12mm SS 202 grade round bar safety grill at 100mm c/c distance modified to 150mm c/c distance in front of handle welded at both ends with 6mm SS 202 grade round bar (v) Welded wire mesh shutter (02 Nos) of size 40mmx18mmx1.3mm thickness 45 degree cut with 0.45mm nominal dia of SS wire mesh, SS 75mm long hinges & PVC magnet, (vi) Entire window shall be powder coated with pure polyster coat of any shade as approved by GE. (vii) Window shall be installed with silicone, complete all as specified and directed by Engr-in-Charge.

Supplying, fabricating & fixing in repairs aluminium partition wall of aluminium section 100mm x 44mm x 1.5mm thick frame recangular section and panel of ACP sheet or prelaminated board in bottom panel and 5.5mm thick glass in top panel with rubber lining and aluminium beading around length including necessary fixing arrangements for bottom and top member of alumium frame in floor/ PCC/ Brick work as per site requirement with rawl plug etc, including chromium plated steel screws 60cm centre to centre, all as specified and directed. (Note: Cost of ACP sheet or prelaminated board and frosted glass shall deemed to be included in the rate qouted for this item).

S&F in replacement toughned glass (plain/ frosted) frameless door with fixed portion of 12mm thick thickness including cutting holes, edges rounded and etching works etc and all kind of stainless steel patch fitting & fixtures, spider patch etc, complete all as specifed and directed of make: Modiguard/ Saint Gobain/ Triveni float glass.

S&F stainless steel handle 600mm long fixed to 12mm thick toughned glass door with and including all fixing accessories i.e. bolt, washer, adhesive etc, complete all as specifed and directed.

S&F stainless steel door lock, glass to glass type, suitable for 12mm frameless toughned glass door with and including all fixing accessories i.e. bolt, washer, screws, adhesive etc, complete all as specifed and directed.

M&L for double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, complete all as specifed and directed.

S & F in repairs Zerbra blinds made out of fabric cloth of approved shade fied as per manufacturer instructions, complete all as specified and directed.

S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor of overall length 140mm, complete all as specified and directed.

S&F door closer aluminium (die casted) body, hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed, complete all as specified and directed.

S&F aluminium door chowkhat of section size 100x451x1.5mm as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets, fillets etc & existing electrical wiring, and removal of debries from site, complete all as specified and directed.

M&L for exposed GI frame/ grid system duly powder coated for module size of 600 x 600 mm suitable for lay-in aluminium/ metal/ mineral fiber ceiling ties having main T runner of 24mm size, suspended at 1200 mm C/C and cross T runner of 24 mm size, suspended at 600 mm C/C with interlocking arrangement to form grid of 600 x 600 mm , perimeter runner/ channel of 15 mm size, main and cross T runner supported by 4mm dia GI rod from slab/ roof, wall angle etc with and including all fixing accessories and making good of disturbed wall surrfaces with POP and one coat of oil emulsion distemper, as required to match the existing surfaces, complete all as directed .

M&L for metal false ceiling, lay-in type, 0.5mm thick having tegular edge profile , duly powder coated, perforated type with glass fiber acoustic fleece, suitable for false ceiling grid/ frame module of 600 x 600mm size, complete all as specified and directed. (Note : The grid/ frame shall be measured and paid for separetly).

S&F solid PVC wall panelling consisting of 5mm thick wood grain finish PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications, complete all as specified.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification, complete all as specified

S&F solid PVC leepping of 2mm wood grain finish PVC sheet is heat bent as as liping on the edges of doors, windows & other edges inclusive solvent cement and fixing at site, complete all as specified.drawing,

Taking up or down 15mm bore steel tubing and connections, complete all as specified & directed.

S&F 15 mm bore tubes, 'medium grade', galvanised, with all fitting; (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs, unions etc) and fixed to wall / ceiling with clips, wall hooks, wooden plugs or laid in floors, complete all as specified.

Dismantling of PVC rain water pipes/ taking out from the floor (any size or pattern), including all fittings, heads, shoes, bends, swan necks etc, complete all as specified & directed.

S&F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors, complete all as specified.

S&F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors, complete all as specified.

S&F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls, with PVC clamp, all as specified.

S&F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls, with PVC clamp, all as specified.

S&F 110mm bore PVC (SWR) bends any radius, complete all as specified & directed.

S&F 75mm bore PVC (SWR) bends any radius, complete all as specified & directed.

S&F 110mm bore PVC (SWR) bends any radius with access door, all as specified.

S&F 75mm bore PVC (SWR) bends any radius with access door, all as specified.

S&F 75mm bore PVC (SWR) vent cowl, complete all as specified & directed.

S&F in repair sinks with drainage board made of stainless steel 0.8mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specified & directed.

S&F 40mm dia and 75cm long PVC waste pipe including tail for stainless steel sink etc, complete all as specified.

Supply and fix in repair 500 litres capacity double layer, rotational molded, polythene water storage tank (cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 20 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe, complete all as specified and directed.

M&L for preparation of roof top surface of RCC slab by cleaning all the dust and loose material by wire brushing/blower/grinder including removal of vegetation/plantation from the roof surface and comprising of the following treatment: (a) M&L for preparation of roof top surfaces, providing and applying single component elastic cold applied polyurethane modified acrylic roofing system, co-elastic technology (CET) based on modified polyurethane and fully fiber reinforced, having sun reflectivity index (SR) of 109 on top of concrete roof surfaces. (b) M&L for treatment with crack seal of all cracks up to 3mm at corner joints, channel and parapets . (c) M&L for applying three coats including one coat of primer of ShaliUrethane BTD/Sikalastic 560/Smartcare damp proof ultra having coverage @ 0.75Kg/m² (min) and dilution up to 10% and laying reinforced fiber net and applying two coats of ShaliUrethane BTD/Sikalastic 560/Smartcare damp proof ultra @ total consumption 2Kg/m² in two coats for maintaining minimum dry film thickness 1.5mm and elongation at break of free film of approx. 350%. The material shall be applied with brush or roller, complete in all respect as per directions of Engr-in-Charge. Note:- (i) 6hrs interval between two coats will be maintained. All auxiliary and accessories involved during application should be supplied by single manufacturer as a part of system. (ii) Water proofing treatment shall be done by the manufacturer or their authorized applicator duly approved by GE in writing. (iii) 5% amount of the total amount of water proofing treatment shall be retained as a guarantee and shall be released after 10 years. However, contractor may deposit the FDR of same amount in favour of GE if contractor fails to rectify the defect pointed out during the period in writing, the defect shall be got rectified at contractor risk and cost and the payment shall be made from the amount kept reserved or by enhancing the FDR deposit by the contractor as guarantee. The contractor's quoted rate for this items shall deemed to be inclusive of this aspects.

Excavating in post holes, in soft / loose soil, (or similar holes) each n. exc. 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n. exc. 25cm, watering and removing surplus soil to a distance n. exc. 50m and making good surfaces, complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor and in paving n exc 15 cm thickness (below or above ground level), complete all as specified & directed.

M&L for 75 mm thick PCC type C-2, 1:3:6 (using 40 mm graded stone aggregate) as in plinth protection laid in bays n. exc. 2 sqm each, finishing the surface of concrete topping even & fair, without using extra cement filling the joints with mastic filling comprising of one part of heated bitumen 85/25 or 95/10 grade and 3 parts of sand (all by weight) complete all as specified and as directed by Engineer-in-Charge.

M&L for cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregates), as in foundation, complete all as specified and directed .

Dismantling of plain or corrugated steel sheeting any gauge, thickness, from roof coverings including ridges, hips, valleys and flashings etc complete all as specified and as directed by Engineer-in-Charge.

S&F for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in lroof covering/cladding to wall, fixed with self tapping screws all as specified.

S&F pre-painted galvaume aluminium zink coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 mpa as in roof covelring/cladding to wall, fixed with self tapping screws as specified, complete all as specified.

Dismantling mild steel work of any description not otherwise provided for, complete all as specified and directed.

M&L for rolled mild steel section as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Fe-410- W (Gde- E-250) quality-B, all as specified.

M&L for preparation of new steel surfaces of any description not other wise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.

Supply and fixing in repair aluminium composite panels cladding of approved make & shade having total thickness of 4 mm (Top coil -0.5mm , non Toxic PE - Core - 3 mm and back Coil -0.50 mm ) with 25 micron PVdF Coating on top coil and polyester / epoxy coating on back coil ( 4-7 microns ) on aluminium substructure fixed with 19 mm x 12 mm x 1.6 mm aluminium cleat & 10 x 100 mm SS Wooden screw with PVC plug on faced horizontal/ vertical surfaces of rectangular / circular columns ,suspended ceiling Cills , jambs ,canopy with including necessary aluminium frame ,scaffolding etc. and making 10 mm to 20 mm wide grooves and applying non staining and non sticking waterproofing silicon sealant of and backing rods complete all as specified and directed. Note :- (i) Only exposed surface shall be measured and paid for. (ii) ACP Material shall be for exterior application & shade as approved by Garrison Engineer

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for, complete all as specified.

M&L for hardcore of broken stones or boulders of guage exc 63mm but n exc 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/ rammed to a true surface, complete all as specifed.

M&L for 100mm thick PCC 1:4:8, type D2 (using 40mm graded aggregate) as in foundations, sub base, complete all as specified and directed.

M&L for sand cushioning for laying interlocking paver blocks, complete all as specified.

M&L for machine pressed colored with glossy finished precast concrete interlocking paver block of approved shape and size of 60 mm thickness, with minimum compressive strength of 35 N/Sqmm (M-35 grade), without correction factor for chamfering, made in rubber moulds with 0.50 mm thick scratch proof lacquer coating on top surface, with grey cement and pigment laid in path / hard standing, complete all as specified and directed.

M&L filleting in any position and to any shape in cement mortar 1:3 or cement concrete 1:2:4 including all mitres, stops, etc., section of fillet exc 25sqcm but n exc 50 sqcm, all as specified.

Demolition of brick work or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as specified.

Demolition of reinforced cement concrete of any description (reinforcement cut as required to facilitate demolition) and in any position, complete all as specified & directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for, complete all as specified.

Dismantling mild steel work of any description not otherwise provided for, complete all as specified and directed.

Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc or for shafts, wells, cesspits, manholes, pier holes, etc n exc 10 sqm on plan and n exc 1.5m in depth and getting out in soft/ loose soil, all as specified.

M&L for cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregates), as in foundation, all as specified and directed .

M&L for reinforced cement concrete of M-25 design mix (using 20mm graded stone aggregate), as foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concretes, all as specified.

M&L for reinforced cement concrete of M-25 design mix (using 20mm graded stone aggregate), as in columns, pillars, piers, posts and struts, all as specified.

M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work; vertical or to batter to rough finish of surfaces, all as specified.

formwork to sides of pillars, posts, struts, piers, columns, and stanchions etc. work in rough finished with rough finished surfaces of concrete complete all as specified and as directed.

M&L for steel TMT bars 10 mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binging with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified.

All as per item no. 91 above but 5mm dia and over and up to and including 10mm dia in stirrups spacers and binders.

Returning filling in, including spreading, levelling, watering and well ramming in layers n.exc 25cm, complete all as specified and directed.

Removing excavated material n. exc 50m and depositing where directed at a level n.exc 1.5m above the starting point , complete all as specified and directed.

M&L for brick work with sub class 'B' Bricks (using old size bricks) straight or curved on plan exc 6m mean radius, built in CM 1:4, complete all as specified and as directed.

M&L for 15mm thick rendering on brick or concrete wall surfaces in cement mortar 1:4, finished the surface fair and even, complete all as specified.

M&L preparing plastered new surfaces of walls and applying two coats of cement base paint over a coat of alkali resistance priming paint, complete all as specified and directed.

M&L for cement concrete 1:2:4, type B-1 (using 20mm graded aggregates), as in copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded for chamfered angles and throating, as directed.

M&L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete with Fe-410-W(Gde- E-250) quality-B, all as specified.

M&L for 20 mm thick granite of any type (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2), using marble dust with admixture of pigment to match with shade of granite including 10mm thick screed bed or bedding layer in CM 1:4, complete all as specified & directed by Engr-in-Charge.

S&F framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0, complete all as specified and directed.

S&F plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment, Fe-410-W (Gde-E-250) quality A, all as specified and directed.

M&L for preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer, all as specified.

S&F in repairs galvanised punched type concertina coil, complete all as specified.

Taking down old unserviceable copper / aluminium point wiring (light / fan socket or power) complete including existing conduit, fixture and fittings such as switches, ceiling rose, holder, regulators, sockets, light fittings etc including making good the disturbed surfaces to match with the existing complete all as specified and directed.

M&L for replacement of point wiring concealed type with 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 20mm dia or higher, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and replacement of modular metal flush box, modular white cover plate with frame, blanking plate etc and making good to the disturbed surfaces to match the existing complete all as specified and directed for one light / bell point/ fan/ exhaust point controlled by one, one way switch 06 Amps. Note : The metal flush box, modular cover plates and frame shall be same make of switch/ sockets

All as per srl item No 106 here-in-before but one 3 pin, 06 Amps socket outlet point on independent board controlled by one, one way 06 Amps switch

All as per srl item No 106 here-in-before but one 3 pin, 06 Amps socket outlet point on same board controlled by one, one way 06 Amps switch

All as per Serial Item No 106 above but point wiring with 2.5 Sqmm single core FRLS cables and earth continuity wire of 2.5 Sq mm single core FRLS cable for one 3 pin 15 Amps socket out let point controlled by one, one way switch on independent board complete all as specified and directed

S&F in repair modular switch, 06 Amps, single pole, one way, 250 volts, one module and IP 20 protection complete all as specified & directed (IP-20 Protection)

S&F in repair modular switch, with indicator, 16 Amps, single pole, one way, 250 volts, one module complete all as specified & directed (IP-20 Protection)

S&F in repair modular socket outlet 05 Pin, 06 Amps, 02 module with shutter complete all as specified & directed (IP-20 Protection)

S&F in repair modular socket outlet 02 in 01, 03 pin, 06 Amps and 16 Amps, 02 module with shutter complete all as specified & directed (IP-20 Protection)

Supply and fix in repair of recessed 36 W LED 2X2 panel backlit type only. Luminaire should be made of single piece deep drawn CRCA housing with fully diffused PC/PS diffuser for general lighting in office areas. The LEDs used should have CRI ≥ 80 and CCT 6500K. The luminaire shall be compliant with IP20 and IK02 classification. Luminaire system efficacy of ≥ 120 lumen/watt. The luminaire shall have life class of min 50,000 burning hrs. The electronic driver used shall have a power factor ≥0.95 . Fixture must have voltage range protection from 140-270V along with inbuilt surge protection of min 3.5KV. The luminaire shall pass Insulation Resistance test @ ≥ 2MΩ . The LED Luminaire & it's driver both should be BIS registered & shall be of the same make/manufacturer as that of LED luminaires. Manufacturer shall have inhouse lab approved by NABL as per 2019 standards.

Supply of rescess/surface mounted 12W slim round LED downlighter. Luminaire made up of Pressure diw cast Aluminum Housing with PC diffuser. the luminiare should be with IP20 from dust. The LEDs used should CRI ≥ 80 and CCT 6500K. Luminaire system efficacy of ≥ 120 lumen/watt. The luminaire shall have life class of min 50,000 burning hrs .The electronic driver used shall have a power factor ≥0.95 . Fixture must have voltage range protection from 140-270V along with inbuilt surge protection of min 2.5KV. The luminaire shall pass Insulation Resistance test @ ≥ 2MΩ. The luminaire shall pass electric strength test . The LED Luminaire & it's driver both should be BIS registered & shall be of the same make/manufacturer as that of LED luminaires. Manufacturer shall have inhouse lab approved by NABL as per 2019 standards.

Supply of surface/wall mounted 20W LED batten. Luminaire made up of Extruded Aluminum Housing with PC diffuser. the luminiare should be with IP40 from dust. The LEDs used should have CRI ≥ 80 and CCT 6500K. Luminaire system efficacy of ≥ 110 lumen/watt. The luminaire shall have life class of min 50,000 burning hrs .The electronic driver used shall have a power factor ≥0.95 . Fixture must have voltage range protection from 140-270V along with inbuilt surge protection of min 2.5KV. The luminaire shall pass Insulation Resistance test @ ≥ 2MΩ. The luminaire Working Temp. range should be from 0⁰ to 50⁰C. The luminaire shall pass electric strength test. The LED Luminaire & it's driver both should be BIS registered & shall be of the same make/manufacturer as that of LED luminaires. Manufacturer shall have inhouse lab approved by NABL as per 2019 standards.

Supply of surface/wall mounted 10W LED batten. Luminaire made up of Extruded Aluminum Housing with PC diffuser. the luminiare should be with IP40 from dust. The LEDs used should have CRI ≥ 80 and CCT 6500K. Luminaire system efficacy of ≥ 110 lumen/watt. The luminaire shall have life class of min 50,000 burning hrs .The electronic driver used shall have a power factor ≥0.95 . Fixture must have voltage range protection from 140-270V along with inbuilt surge protection of min 2.5KV. The luminaire shall pass Insulation Resistance test @ ≥ 2MΩ. The luminaire Working Temp. range should be from 0⁰ to 50⁰C. The luminaire shall pass electric strength test. The LED Luminaire & it's driver both should be BIS registered & shall be of the same make/manufacturer as that of LED luminaires. Manufacturer shall have inhouse lab approved by NABL as per 2019 standards.

Taking down existing sub main wiring aluminium/copper 4/6/10/16sqmm.

M&L Sub main wiring concealed with 4 sqmm (Nominal area) with two runs of single core cable PVC insulated FRlS multistrand unsheathed copper conductor cable including 1100 V grade, drawn through Conduit including 4 sqmm (nominal area) single core PVC insulated multistrand unsheathed copper conductor as earth wire and duly connected to all common earth point all as Specified and directed by Engr-in-Charge.

All as per srl item no. 119 here-in-before but with 2 run of 6.0 sq mm FRLS copper wire with 6.0 Sqmm FRLS copper cable as earth wire.

All as per srl item no. 119 here-in-before but with 2 run of 10.0 sq mm FRLS copper wire with 10.0 Sqmm FRLS copper cable as earth wire.

All as per srl item no. 119 here-in-before but with 4 run of 16.0 sq mm FRLS copper wire with 16 Sqmm FRLS copper cable as earth wire.

S&F in repair sheet metal enclosure distribution board, single pole and neutral, AC, 240 volts, with 200 Amps rated copper bus bar and metal door with IP - 43 & IK 09 protection along with cable end box for DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete for following No of way :-

S&F in repair sheet metal enclosure distribution board, triple pole and neutral, 8way, AC, 415 volts, with 200 Amps rated copper bus bar and metal door with IP - 43 & IK 09 protection along with cable end box for DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete.

S&F in repair sheet metal enclosure distribution board triple pole and neutral (VTPN) 4 way, AC, 440 volts of following ways with 200 Amps rated copper bus bar and metal door with IP 43 & IK 09 protection along with cable end box for DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified and directed.

S&F in repair MCCB 4 pole, 415 Volt adjustible type of 160 Amp, 25kA capacity and making connections by using suitable copper lugs complete.

Supply and fixing in repair 415V 10KA, miniature circuit breaker (MCB) of 40 to 100 Amps TPN in the DB and making connections by using suitable copper lugs complete.

S&F in repair MCB SPN, AC, 240 volts of 63 Amps capacity "B" curve, 10 KA breaking capacity and making connections by using suitable copper lugs complete.

S&F in repair MCB, SP, AC, 240 volts of 6 to 32 Amps capacity "B" curve, 10 KA breaking capacity and making connections by using suitable copper lugs complete all as specified & directed.

Supply and fix Building security light with high efficient high power LED street light 45 watt of day and night sensor based with lens with pressure die cast aluminium housing and enclosed with toghened glass IP-66, and Color Rendering Index (CRI>70), IP20, correlated Color Temparature (CCT- 5700K to 6500K) , PF>0.9 and Voltage rated 220V to 240V etc including bracket, clamps and all other fixing accessories complete all as specified and directed by Engr-in Charge.

Supply and fix in repair cob downlight 15 W, square in shape surface mounting Luminaire made up of Pressure diw cast Aluminum Housing with PC diffuser. the luminiare should be with IP20 from dust. The LEDs used should have CRI ≥ 80 and CCT 6500K. Luminaire system efficacy of ≥ 120 lumen/watt. The luminaire shall have life class of min 50,000 burning hrs.The electronic driver used shall have a power factor ≥0.95. Fixture must have voltage range protection from 140-270V along with inbuilt surge protection of min 2.5KV. . The luminaire shall pass Insulation Resistance test @ ≥ 2MΩ. The luminaire shall pass electric strength test. The LED Luminaire & it's driver both should be BIS registered & shall be of the same make/manufacturer as that of LED luminaires. Manufacturer shall have inhouse lab approved by NABL as per 2019 standards.

Supply and fix in repair LED Bollard 7W, 800mm 5700K complete all as specified and directed.

Supply and fix in replacement of MCB protected modular AC/Geyser box complete with and including 6 pin socket, plug top, modular cover plate, mini MCB SP 20 Amp capacity complete all as specified and directed by Engineer-in charge.

Supply and Installation of energy efficient BEE 5 star rated Electric Water Heater (Geyser) storage type, having heating coil of capacity 2KW, single phase, capacity 25 liters, with cold rolled steel tank with glass coating inside tank including fixing on wall with required fasteners, nuts, electric connection, Stainless Steel 18 inch flexi Connection pipe set suitable for hot and cold water and writing MES No in black synthetic enamel paint/engraving tool etc complete all as specified and directed by Engineer-in-charge. Make : Racold Andris Lux/ Havells/ V-Guard. Note : Contractor will submit guarantee/warranty certificate from manufacturer.

Taking down existing fire alarm system incuding panel, detectors, music speaker, AC diffuser etc and refixing it complete including all fixing accessories complete all as specified and directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm including connection with flexible twin core cable to ceilingrose and making hole in wall complete all as directed.

Supply and laying XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 sq.mm 2 core complete all as specified and directed.

M&L for excavating in any type of soil, in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for laying of cable, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out, all as directed by Engineer -in-charge.

M&L for Returning filling in any type of soil, including spreading, levelling, watering and well ramming in layer not exc 25 cm in each layer , all as directed by Engineer -in-charge.

M&L for removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point including oading/ unloading and stacking at the destination, all as directed by Engineer -in-charge.

M&L for Sand filling in and arround LT cable 8cm thick below and 15cm above the cable respectively after laying the cable gently punning down complete all as specified and dircted.

M&L for laying of bricks of common burnt clay, sub class-B for LT underground cable protection, all as specified

S&F GI tubing light grade 50mm dia with all fittings laid in trenches/fixed on wall/ceiling including dismantling of old pipe etc.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing and refixing the same as per exiting floor tiles complete all as specified and directed

PCC 1:2:4 type B1 (using 20 mm graded hard stone aggregate), casting in cube of size required size at site by using necessary form work for fixing Arial pointers with base for lightning protection system all as specified. (Note : Quoted rate deemed to be inclusive cost of form work complete.)

M & L Earthing complete with galvanised steel earth plate electrode 600 x 600 x 6.3 mm thick buried directly in ground earth pit not less than 2.25 mtr deep below ground level connected with earthing lead of 4mm dia galvanised iron or steel wire all by means of nuts and bolt check nuts and washers of galvanised iron sheet all as shown in electrical plate Nos 5 of SSR Part - I and connected to and including earthing test point complete including testing filling of adequate quantity of charcoal dust and common salt including refilling earth and removal of surplus soil up to 50 mtrs PCC 1:3:6 type CI chamber precast RCC cover 40 mm thick reinforced with 6 mm dia MS bar 3 Nos both way with handle made but at 6 mm dia MS bar water pipe with wire mesh and connecting testing etc complete all as specified and directed.

Mohit Infratech (BID ID -3257495)

Commercial Traders (BID ID -3258503)