Loading
Loading…
Loading…
Tender Value
₹8.7 Cr
EMD Value
₹5.8 L
Closing Date
19 Feb 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
TENDER
15 conditions · 4 needing a document upload
Financial Eligibility Criteria : The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Electrical License: The individual/firm should have valid "A" grade electrical license and should be on their own name/firm name issued by the competent Authority. A copy of license should be uploaded through IREPS with their offer, failing which the tender WILL BE REJECTED.
Similar nature of work: - "Works of supply, installation, testing and commissioning of substation (with or without supply of transformers/sub- station equipments) for 11 KV or above, with atleast 50% capacity of the proposed sub-station KVA rating. (Ref: Hqrs Lr.No:E.29/P/Similar nature of works Dt: 30.12.2014.)
Technical Eligibility Criteria: (a)The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii)One similar work costing not less than the amount equal to 60% of advertised value of the tender. (b) (1)In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii)One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender.
37 conditions · 4 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The General Conditions of Contract governing the performance of the works covered by this tender are the Indian Railway Standard General Conditions of Contract as amended from time to time up to date. A soft copy of the Indian Railway Standard General conditions of Contract is uploaded in the annexed documents to the tender. Hard copy may be perused in the office of the Senior Divisional Electrical Engineer/Maintenance/ Secunderabad Division/ South Central Railway / Secunderabad - 500025. In submitting the tender it would be deemed that the tenderer has kept himself fully Informed of the provision of the Indian Railways Standard General Conditions of Contract including all corrections and Amendments issued upto date and claim that he is not aware of any amendment or correction slip to the IRSGCC shall not be entertained.(As per IRGCC April 2022 or latest with amendments).
STUDY OF DRAWINGS AND LOCAL CONDITIONS: The drawings for the works can be seen in the office of the Senior Divisional Electrical Engineer/Maintenance/ Secunderabad Division/ South Central Railway/ Secunderabad - 500025. It should be noted that these drawings are meant for general guidance only and Railway may suitably modify them during the execution of work according to the circumstances without making the Railways liable for any claims on account of such changes. If there is any variation between the description in the tender and the detailed plans, the Engineer-in-Charge will operate the correct description and his decision is final and binding on the tenderer/ Contractor. The Tenderer/Contractor is required to inspect the sites of works and acquaint himself with the site conditions, availability of approaches for transporting of men and materials, space and other factors relating to the works, availability of labour, electricity and water, etc., before quoting his rates. The extent of lead and lift involved in the execution of works and any difficulties involved in the execution of work should also be examined before formulating the rates for complete items of works described in the schedule. The Tender submitted will be deemed to have been made after such inspection.(As per IRGCC April 2022 or latest with amendments).
DRAWINGS FOR WORKS: The percentage rates for the schedule items and itemized rates for the non-scheduled items quoted by the tenderer as may be accepted by the railways will, hold good irrespective of any changes, modifications, alterations, additions, omissions in the locations of structures and detailed drawings, specifications and/or the manner of executing the work. It should be specifically noted that some of the detailed drawings may not have been finalised by the Railway and will, therefore, be supplied to the contractor as and when they are finalised on demand. No compensation whatsoever on this account shall be payable by the Railway Administration. No claim whatsoever will be entertained by the Railway on account of any delay or hold up of the works arising out of delay in approval of drawings, changes, modifications, alterations, additions, omission and the site layout plans or detailed drawings and design and/or late supply of such material as are required to be arranged by the Railway or due to any other factor on Railway Accounts.(As per IRGCC April 2022 or latest with amendments).
Manual tenders sent by Post/FAX/Courier or in Person SHALL NOT BE ACCEPTED (As per IRGCC April 2022 or latest with amendments).
If the Bid of a Tenderer is seriously unbalanced in relation to the Engineer's estimate of the cost of work to be performed under the contract, the Railways may require the tenderer to produce detailed price analysis for any or all items of the Tender Schedule, to demonstrate the internal consistency of those prices with the construction methods and schedule proposed. (As per IRGCC April 2022 or latest with amendments).
CORRIGENDUM NOTICE ON IREPS: [I] Railway may modify the tender document by issuing online corrigendum through www.ireps.gov.in [II] Prospective Bidders shall keep watch for CORRIGENDUM upto 15 days prior to the deadline for submission of bids. For the purpose of CORRIGENDUM in the tender, NIT period is splitted as under: (a) ADVERTISEMENT PERIOD: The time during which all information pertaining to tender shall be available but offers cannot be submitted (b) OFFER SUBMISSION PERIOD: 15 days prior to closing of tender, during which tenderers can submit their offer. [III] To give prospective bidders a reasonable time on account of CORRIGENDUM in preparing their bids, the Railways may at their discretion extend as necessary, the deadline for submission of Tender document. Railways decision will be final and no correspondence will be entertained from prospective bidders. (As per IRGCC April 2022 or latest with amendments).
E-Tender shall be rejected if it is not accompanied by the prescribed: [1] Cost of tender document [2] EMD [3] Certificate(s) in support of technical eligibility criteria [4] Certificate(s) in support of financial eligibility criteria [5] Copy of documents in support of Proprietary concern/ Partnership firm / Pvt.Ltd.company / Limited Company / JV firm / Valid MOU for JV firms as detailed in COMMERCIAL COMPLIANCE. (As per IRGCC April 2022 or latest with amendments).
The bidders/tenderers should ensure that they are GST compliant. Quoted rates are inclusive of applicable GST as per GST ACT -2017 amended from time to time and as detailed in Special Conditions - General (under TAXES clause). (As per IRGCC April 2022 or latest with amendments).
The tenderer[s] may also upload the following documents alongwith his/their tender: The tenderer may upload method statement, which shall contain organizational set up and working systems to be adopted by the successful tenderers during the operation of the contract. It shall contain the details of man power and machineries in the prescribed format and details of methodology for planning, execution, monitoring and completion of the project. The methodology so adopted shall suit to the nature of work and shall also comply fully with best practice and current regulations. A comprehensive detailing for each activity like setting-up organization, safety plan, execution plan, quality assurance plan, sequence of work to achieve the mile stones, ensure targeted progress and quality and inturn deployment of resources, risk analysis and its mitigation strategy shall be given communication arrangement within his organization and with the railways for decisions, progress or any other matter connected with this project to ensure full information about the project including progress of work at different time scale shall also be furnished. (As per IRGCC April 2022 or latest with amendments).
Tenderer shall adhere to the time frame as mentioned in mile stone chart prescribed in the tender. (As per IRGCC April 2022 or latest with amendments).
Tenderer shall engage the personnel with requisite qualification as per Special Conditions of Contract. (As per IRGCC April 2022 or latest with amendments).
Tenderer shall deploy adequate number of plant and equipment for the execution of subject contract works to achieve progress as per mile stone chart. (As per IRGCC April 2022 or latest with amendments).
List of works completed in the last seven financial years giving description of work, organization for whom executed, approximate value of contract at the time of award, date of award and date of scheduled completion of work. Date of actual start, actual completion and final value of contract should also be given. (As per IRGCC April 2022 or latest with amendments).
List of works on hand indicating description of work, contract value, and approximate value of balance work yet to be done and date of award. (As per IRGCC April 2022 or latest with amendments).
Supportive documents/certificates from the organizations with whom they worked/are working as list of works completed and list of works on hand should be enclosed. (As per IRGCC April 2022 or latest with amendments).
[1] I/We have read the various conditions of the tender attached hereto and hereby agree to abide by the said conditions. I/We also agree to keep this tender open for acceptance for the period mentioned in the tender document [NIT HEADER] from the date fixed for opening the same and in default thereof, I/We will be liable for forfeiture of my/our Earnest Money Deposit submitted. [2] I/We offer to do the work at the percentage rates quoted by me/us in the attached schedule and bind myself/ourselves to complete the work within the period of completion given in this tender document [NIT HEADER] from the date of issue of letter of acceptance of this tender. I/We also hereby agree to abide by the IRS GCC and Special Conditions of contract in carryingout the works laid down by South Central Railway for the present contract. [3] The full value of the earnest money paid shall stand forfeited without prejudice to any other rights or remedies of the railway if [a]I/We do not execute the contract document within seven days after receipt of notice issued by the Railway that such documents are ready: OR [b] I/We do not commence the work within fifteen days after receipt of orders to that effect. [4] Until a formal agreement is prepared and executed, acceptance of this tender shall constitute a binding contract between us subject to modifications, as may be mutually agreed to between us and indicated in the letter of acceptance of my/our offer for this work. (As per IRGCC April 2022 or latest with amendments).
I/We fail to submit the requisite Performance Guarantee [P.G] in the prescribed format within the time limit as prescribed in GCC (as amended from time to time) from the date of issue of Letter of Acceptance, we are aware that the contract shall be terminated duly forfeiting EMD and other dues, if any payable against the contract. Also, I/We shall be debarred from participating in the retender for the work. (As per IRGCC April 2022 or latest with amendments).
I/We understand that no post-tender correspondence will be entertained, however, if any clarification is required by the Railway, the same will be sought from the tenderer. Also, I/We are aware that any Certificate/ Documents offered after the tender opening shall not be given any credit and shall not be considered. (As per IRGCC April 2022 or latest with amendments).
I/we do hereby solemnly affirm and state on behalf of the tenderer including its constituents as under: (As per IRGCC April 2022 or latest with amendments).
[i] I/We the tenderer(s) am/are signing this document after carefully reading the contents. [ii] I/We declare and certify that I/We have not made any misleading or false representation in the documents, forms, statements attached in proof of the qualification requirements. [iii] I/We also understand that my/our offer will be evaluated based on the documents/credentials uploaded alongwith the offer and the same shall be binding upon me/us. [iv] I/We declare that the information and the documents attached alongwith the tender by me/us are correct and I/We are fully responsible for the correctness of the information and the documents submitted by us. (As per IRGCC April 2022 or latest with amendments).
[i] I/We do hereby undertake that, if any of the certificates regarding eligibility criteria submitted by us are found to be forged/false/incorrect at any time during the process of evaluation of the tenders, it shall lead to forfeiture of the tender EMD. Further, I/We and all my/our constituents understand that my/our offer shall be summarily rejected. [ii] I/We also understand that, if the certificates submitted by us are found to be false/forged/ incorrect at any time after the award of the contract, it will lead to termination of the contract besides suspending of business for 5 years, with the tenderer and with all the partners in case of partnership firm and with all the members of a JV in case of a Joint Venture, forfeiture of EMD/SD and Performance Guarantee and any other action provided in the contract. (As per IRGCC April 2022 or latest with amendments).
It is certified that I/We have not been blacklisted or debarred by railways or any other ministry/ department/public sector undertaking of the government of India/State Government from participation in tenders/contract on the date of tender opening of bids, either in individual capacity or as a member of JV firm in which I/We were/are members. (As per IRGCC April 2022 or latest with amendments).
I/We indemnify and save harmless the Railway from and against all actions, suit proceedings losses, costs, damages, charges, claims and demands of every nature and description brought or recovered against the Railways by reason of any act or omission of the Contractor, his agents or employees, in the execution of the works or in his guarding of the same. All sums payable by way of compensation under any of these conditions shall be considered as reasonable compensation to be applied to the actual loss or damage sustained, and whether or not any damage shall have been sustained. (As per IRGCC April 2022 or latest with amendments).
The prices are inclusive of GST
Secunderabad Division Electrical Maintenance Department - (i) Up gradation of Substation at DKJ, ZB & SNF stations for improve reliability of power supply. (ii) Shifting of Substation from PF No.3 to PF No.1 at BIDAR. (iii)Provision of RMUs in place 4 pole structures at substations of MCI, BPA,MMZ, SKZR MAGH, LPI, ELS/KZJ, DLS/KZJ, LRB Substation, DLS/KZJ , DLS colony , DLS-HT Incoming Point ,BG & KHNP, BDCR substations (iv) Augmentation and strengthening of HT power supply arrangements SNF, RDM, BPA & DKJ Depots.- Electrical arrangements.
E-M-SC-38-OT-2025-26~SCR
E-M-SC-38-OT-2025-26
Open
Works - General
6 Months
Hyderabad, Telangana
₹0
₹5.8 L
19 Feb 2026
28 Jan 2026
5 Feb 2026
209 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 8,69,19,846.65 | ||
| — | 90.00 | — | — | ||
| Concrete for foundations and plinth in other than hard soil and rock | — | — | — | 3,60,270 | |
| — | 90.00 | — | — | ||
| Concrete for foundations and plinth in hard soil. | — | — | — | 3,86,280 | |
| — | 2.00 | — | — | ||
| "Supply, erection, testing, and commissioning of 500 kVA, 11/0.433 kV, 3-phase, copper-wound, oil-immersed, outdoor-type distribution transformer conforming to IS 1180:2014 or latest amendments, Energy Efficiency Level 3." | — | — | — | 22,49,080 | |
| — | 4.00 | — | — | ||
| "Supply, erection, testing, and commissioning of 250 kVA, 11/0.433 kV, 3-phase, copper-wound, oil-immersed, outdoor-type distribution transformer conforming to IS 1180:2014 or latest amendments, Energy Efficiency Level 3." | — | — | — | 34,80,000 | |
| — | 2.00 | — | — | ||
| "Supply, erection, testing, and commissioning of 160 kVA, 11/0.433 kV, 3-phase, copper-wound, oil-immersed, outdoor-type distribution transformer conforming to IS 1180:2014 or latest amendments, Energy Efficiency Level 3." | — | — | — | 11,61,000 | |
| — | 10.00 | — | — | ||
| Excavation of pit and construction for transformer plinth for out door transformer of size 2.0Mtr X2.0Mtrx2.0Mtr with stone/brick masonary with all connected accessories. | — | — | — | 87,360 | |
| — | 18.00 | — | — | ||
| Supply, installation, testing and commissioning of 11 KV 630A, 21 KA 3 way, extensible, 3 circuit outdoor motorized RMU comprising of breaker (VCB), MCR type, +VVV+M. | — | — | — | 1,60,94,160 | |
| — | 1.00 | — | — | ||
| Supply, installation,testing andcommissioning of 12 KV630A, 4 Way Combination of SF6 VCB-4 nos Ring main unitcomplete, extendable,outdoor type with SF6 insulated 4 way,Numerical relay with overcurrent, earth fault,IDMT, CTs ofcap150/100-1 Amp, HTmetering with 0.2S classwith MD resettable,manual & electrically operated and remote operated as per specification with SCADA compatibility | — | — | — | 13,72,439 | |
| — | 3100.00 | — | — | ||
| Supply and erection of 3 core x 185 Sqmm HTUG XLPEaluminum armouredcable as per BISspecification No.IS 7098.Part-II or(latestamendments ) along withend terminations | — | — | — | 43,64,800 | |
| — | 2400.00 | — | — | ||
| Supply and erection of 3 core x 120 Sqmm HTUG XLPEaluminum armouredcable as per BIS specification No.IS 7098.Part-II or(latestamendments ) along withend terminations | — | — | — | 26,56,800 | |
| — | 156.00 | — | — | ||
| Supply, fixing,connecting, testing &commissioning of 3 core HT cable Outdoor end termination kits 120-185 sq.mm | — | — | — | 22,30,020 | |
| — | 176.00 | — | — | ||
| Supply, fixing,connecting, testing &commissioning of 3 core HT cable indoor end termination kits 120-185 sq.mm | — | — | — | 21,37,168 | |
| — | 20.00 | — | — | ||
| Supply, fixing, connecting,testing & commissioning ofHeat shrinkable cablestraight through joint kit,11 KV 3 core 120-185 sqmm HT XLPE cable with allconnected accessoriesconfirming to IS13573/1992 or latest ofRaychem make as per thedirections of Engineer atsite | — | — | — | 1,88,000 | |
| — | 75.00 | — | — | ||
| Supply and erection of 22 SWG Tinned Copper Fuse Wire. Acceptable makes: Bharath or Similar. Accepted make/brand: POWER | — | — | — | 1,02,660 | |
| — | 3000.00 | — | — | ||
| Supply and erection Transformer Oil confirming to Specification IEC-60296 and CLW Specn. No. CLW/ES/3/0172 or Latest. Accepted make/brand: BPCL : MAK HIVOLTOL R | — | — | — | 4,35,000 | |
| — | 30.00 | — | — | ||
| Supply and erection Silica Gel Breather Clear view typewith Blue (Indicative) Silica Gel (Silic Gelconforning to IS:3401:1992 latest) | — | — | — | 1,24,170 | |
| — | 1775.00 | — | — | ||
| Supply and erection of 100 mm 'B' class GI pipes as per IS:1239 along with accessories. | — | — | — | 15,85,075 | |
| — | 1000.00 | — | — | ||
| Supply and erection of 63 mm of HDPE pipes of Grade PE-100, PN 6 (6Kg/Cm2 Capacity) with accessories as per IS 4984 - 1995 | — | — | — | 1,33,000 | |
| — | 3100.00 | — | — | ||
| Supply and erection of 110 mm size of HDPE pipe of Grade PE-100, PN 6 (6Kg/Cm2 Capacity) with accessories as per IS 4984 - 1995 (SDR - 21) | — | — | — | 12,98,900 | |
| — | 3000.00 | — | — | ||
| Supply and erection of 4 core x 400 Sqmm LTUG XLPE Aluminium armoured cable as per BIS specification IS 7098 Part I or(latest amendments ) along with end terminations | — | — | — | 55,05,000 | |
| — | 1480.00 | — | — | ||
| Supply and erection of 4 core x 240 Sqmm LTUG XLPE Aluminium armoured cable as per BIS specification IS 7098 Part I or(latest amendments ) along with end terminations | — | — | — | 24,49,400 | |
| — | 5500.00 | — | — | ||
| Supply and erection of 4 core x120 Sqmm LTUG XLPE Aluminum armored cable as per BIS specification IS 7098 Part I or (latest amendments ) along with end terminations | — | — | — | 48,12,500 | |
| — | 3500.00 | — | — | ||
| Supply and erection of 4 core x95 Sqmm LTUG XLPE Aluminium armoured cable as per BIS specification IS 7098 Part I or (latest ammendements ) along with end terminations | — | — | — | 24,74,500 | |
| — | 3900.00 | — | — | ||
| Supply and erection of 4 core x70 Sqmm LTUG XLPE Aluminum armored cable as per BIS specification IS 7098 Part I or (latest amendments ) along with end terminations | — | — | — | 21,68,400 | |
| — | 2200.00 | — | — | ||
| Supply and erection of 4 core x50 Sqmm LTUG XLPE Aluminum armored cable as per BIS specification IS 7098 Part I or (latest amendments ) along with end terminations | — | — | — | 8,75,600 | |
| — | 500.00 | — | — | ||
| Supply and erection of 4 core x35 Sqmm LTUG XLPE Aluminum armored cable as per BISspecification No.IS 7098.Part-Ior (latestamendments ) along withend terminations | — | — | — | 1,62,500 | |
| — | 1500.00 | — | — | ||
| Supply and erection of 4 core x 25 Sqmm LTUG XLPE Aluminium armoured cable as per BIS specification IS 7098 Part I or(latest amendments ) along with end terminations | — | — | — | 3,66,000 | |
| — | 1500.00 | — | — | ||
| Supply and erection of 2 core X 70 Sqmm LTUG XLPE Aluminum armored cable as per BISspecification No.IS 7098.Part-I or (latestamendments ) along withend terminations | — | — | — | 4,78,500 | |
| — | 26680.00 | — | — | ||
| Supply and erection of 8 SWG GI wire | — | — | — | 2,66,800 | |
| — | 10150.00 | — | — | ||
| Excavation of cable trench in all types of soils for LT cable as per the directions of engineer at site making good after laying the cable | — | — | — | 13,19,500 | |
| — | 3000.00 | — | — | ||
| Excavation of cable trench in cement concrete bed flooring as per the Rly specification No:C/E/UGC/1/92& Drg No:SC/A3/STD/1288 Alt-I | — | — | — | 12,15,000 | |
| — | 850.00 | — | — | ||
| Excavation of cable trench across the track as per the Rly specification No:C/E/UGC/1/92& Drg No:SC/A3/STD/1288 Alt-I | — | — | — | 2,25,250 | |
| — | 740.00 | — | — | ||
| Horizontal drilling of bores for HT/LT cables of suitable size as per the guideline of Site Engineer | — | — | — | 15,96,180 | |
| — | 90.00 | — | — | ||
| "Supply of earth pit materials and construction of earth pit as per IS 3043:1987 specification. This item also includes of supply and erection of CI pipe of size of 100mm inner diameter, 13mm thickness and 3000mm length. This work also includes of fabrication and fixing of GI strips for earthing connection. Excavated eathpit should be filled by mixture of coke/charcoal, salt and sand up to top. Provision of brick masonary chamber of size 650mmx650mm and depth upto 1000mm including light type CI cover frame and applying 12mm thick cement plaster in 1:3 inside and to all the exposed faces up to 300mm below. Foundation level, curing etc., All required materials for this job such as CI pipe cover with frame, salt, cement sand, charcoal gravel, bricks etc required bolts, nuts and double washers, number plates or painted plates. Tentative quantity of salt and charcoal shall be of 2.5CMt. The CI pipe should be painted with 2 coats of bitumen paint as per the directions of Rly engineer at site. Note: The work should be strictly done as per IS 3043:1987 specification or latest." | — | — | — | 7,83,000 | |
| — | 30.00 | — | — | ||
| Supply and erection of Earthing arrangements | — | — | — | 1,04,940 | |
| — | 30.00 | — | — | ||
| Supply and Erection Provision of RCC earth pit hollow box of size 300 mm x 300 mm x 300mm with 50 mm wall thickness as per Drg. no. SDO/RDSO/E&B/001 by using M20 Grade precast RCC. It includes fixing of earth pits at various locations (All the required men, material and transportation are to be arranged by contractor) | — | — | — | 22,080 | |
| — | 30.00 | — | — | ||
| Supply and Erection of RCC precast slabs with hook to cover Earth pits of dimensions as shown in IRSEM drg no 19-D6. All the required materials for this work i.e. stones, cement, iron and sand etc. are to be supplied by contractor.) | — | — | — | 4,680 | |
| — | 140.00 | — | — | ||
| Supply and erection of earth electrodes for maintenance free earthing i.e., copper bonded high tensile low carbon steel electrode of with minimum 3mtrs. Long, 17 mm dia with copper coating thickness of min 250 microns and current carrying capacity of min 15 KA for 1 sec. | — | — | — | 5,77,500 | |
| — | 7000.00 | — | — | ||
| Supply and filling of Earth enhancing materials for maintenance free earthing. | — | — | — | 18,20,000 | |
| — | 70.00 | — | — | ||
| Supply and fixing of copper bus bar 50x 6mm. | — | — | — | 2,80,000 | |
| — | 70.00 | — | — | ||
| Supply and fixing of 25x3 mm EC grade copper strip for connecting earth terminal to the bus bar in equipment room. | — | — | — | 1,11,860 | |
| — | 140.00 | — | — | ||
| Earth chamber with LID 100x250x250 mm. | — | — | — | 98,000 | |
| — | 2800.00 | — | — | ||
| Supply & laying of 35mm cable from pit to main equipment bus bar including bolts, nuts & HDPE pipes | — | — | — | 6,72,000 | |
| — | 280.00 | — | — | ||
| Supply & providing of exothermic weld connection | — | — | — | 1,74,720 | |
| — | 1300.00 | — | — | ||
| Supply & laying/spreading of 40/20mm ballast (hard granitemetal) to electrical substations in SC areaincluding transportation,loading and un loading ofballast at location asdirected by the Engineerat site | — | — | — | 17,55,000 | |
| — | 32.00 | — | — | ||
| Supply of Shock treatment boards. | — | — | — | 34,112 | |
| — | 17.00 | — | — | ||
| Supply of First Aid Box including medicines. | — | — | — | 31,722 | |
| — | 17.00 | — | — | ||
| Supply of portable Fire Extinguishers dry chemical type 9/10 Kgs. Capacity fitted with gun metal cap. Drychemical powder 9/10 Kgs conform to IS:4303 and carbondioxide conform to IS 4947. | — | — | — | 2,58,893 | |
| — | 2.00 | — | — | ||
| Supply of 2.5 KV Hand Driven Megger Scale 0-10000 Mega Ohms withaccessories Make-Wabco/Micro orEquivalent. Firm's offeredmake -'RISHABH SHANTIITHV25100' | — | — | — | 17,336 | |
| — | 17.00 | — | — | ||
| Supply of Insulation testing meter 500V, 0-1000 MOhms. | — | — | — | 45,815 | |
| — | 17.00 | — | — | ||
| Supply of Digital clamp on meter 3 1/2 digit Make: Motwane make model No.DCM30A | — | — | — | 65,467 | |
| — | 15.00 | — | — | ||
| Supply of Earth Resistance Megger hand driven generation type conforming to IS- 2992/83 or latest measuring range 0 to 1-10-100 Ohms | — | — | — | 63,990 | |
| — | 120.00 | — | — | ||
| Supply and fixing of Danger boards in Hindi/English and on enameled steel plate with clamps, bolts, nuts etc . | — | — | — | 55,800 | |
| — | 20.00 | — | — | ||
| Provision of rubber mats of 2m X 1 m X 10mm thick as per IS Spec. | — | — | — | 41,820 | |
| — | 50.00 | — | — | ||
| Excavation of trench in Hard rock soil to a depth of 1500mm and width of 450mm, laying of 2 runs of 11kV XLPE HT cable including supply and laying of sand cushioning (100mm below and 150mm above)brick separators between cables at every 1 meter, protective covering with shade stone slabs, and backfilling with excavated soil upto ground level with proper compaction on layer basis | — | — | — | 1,50,000 | |
| — | 8.00 | — | — | ||
| "Supply and erection of 11kV Potential TransformerRatio: 11kV/110V; Freq: 50 Hz Class: 0.5; Burden: 50VA HSV/INS Level: 12/28/75kV" | — | — | — | 2,68,184 | |
| — | 48.00 | — | — | ||
| Supply and erection of HT striker fuses of rating 16A , 11kV/12kV for RMUs/LBS/SFUs | — | — | — | 1,24,608 | |
| — | 48.00 | — | — | ||
| Supply and erection of HT striker fuses of rating 85A , 11kV/12kV for RMUs/LBS/SFUs | — | — | — | 1,81,248 | |
| — | 48.00 | — | — | ||
| Supply and erection of HT cartridge fuses of rating 3A , 11kV/12kV for RMUs/LBS/SFUs | — | — | — | 48,144 | |
| — | 8.00 | — | — | ||
| Supply & erection of Motwane Glass-fibre reinforced polyester tube Non-Contact High Voltage Detector, Nominal Voltage 90V-33KV Motwane (HV 50P) | — | — | — | 4,80,000 | |
| — | 33.00 | — | — | ||
| Supply of Fire Buckets(5 nos Bukets ) including stand | — | — | — | 2,51,262 | |
| — | 46.00 | — | — | ||
| Supply of Earth Discharge rod. | — | — | — | 35,420 | |
| — | 122.00 | — | — | ||
| Supply of 11kV Hand Gloves. | — | — | — | 8,662 | |
| — | 2.00 | — | — | ||
| Supply of 3½ digit LCD display Auto ranging Digital Earth Resistance Meter Similar to (Fluke 1623-2 GEO Earth Ground Tester) | — | — | — | 4,39,998 | |
| — | 8.00 | — | — | ||
| Supply of 3.5 digit Backlit LCD Hand Held True Rms Clamp Meter Similar to (FLUKE 305) | — | — | — | 1,07,096 | |
| — | 4.00 | — | — | ||
| Supply of Category III 1000 V of IEC61010 InsulationTester Similar to (Fluke 1507 Insulation ResistanceTester) | — | — | — | 2,17,288 | |
| — | 750.00 | — | — | ||
| Supply and erection of fencing panels at transformers (or) sub-station. | — | — | — | 14,25,000 | |
| — | 25.00 | — | — | ||
| Supply and erection of fencing uprights | — | — | — | 15,34,350 | |
| — | 123.00 | — | — | ||
| Supply and erction of Gate | — | — | — | 2,47,230 | |
| — | 13.00 | — | — | ||
| Supply, erection,Installation, testing and Commissioning of 11 KV200A AB switch verticaloperated , operating rod,handle mountingarrangement including,necessaryAngles/Channels requiredfor erection of ABswitch/Dropout fusesetc., clamps, bolts, nutsetc., (only rail poles will be supplied by Railways) | — | — | — | 2,18,738 | |
| — | 21.00 | — | — | ||
| Supply and erection of 11KV Drop out fuse switch unit (3 Nos) | — | — | — | 1,16,592 | |
| — | 33.00 | — | — | ||
| Supply, Erection,Installation, testing and Commissioning 3Nos of lightening arrester outdoor type use for 9KV,10KA Gapless metaloxide type suitable to11KV with all connectedaccessories (1Set=3Nos) | — | — | — | 2,26,182 | |
| — | 13.00 | — | — | ||
| Supply and erection of 2pole structure withreleased rail polescomplete with casting offoundation, crossbracings 11 KV pin/disc.,insulators, HT bus bar ,MS channels, bolts, nuts,including painting etc., asper the specification.(only rail poles will besupplied by Railways)complete Note: Rail poleshould be transportedfrom nearby availableRailways stock | — | — | — | 5,26,786 | |
| — | 5.00 | — | — | ||
| Dismantling of Existing 2P structure complete | — | — | — | 24,995 | |
| — | 15.00 | — | — | ||
| Dismantling of Existing 4P/6P structure complete | — | — | — | 2,25,645 | |
| — | 5.80 | — | — | ||
| "Design,fabrication,supply, of LT Outdoor type panel board with 14 SWG ( Powder coated RAL 7032 ) with suitable capacity of Busbar, including supply and fixing of , digital votmeter- 02 No's, digital ammeter-02 No's with CTS, Earth fault relay with CBCT, indication lamps complete with all accessories, for housing 2 x 800A 4P EDO ACB,50 KA for I/Cs, Out gogings:2x400A 4P MCCB, 02x250A 4P MCCBs, 02x160A 4P MCCB , 04x100A 4P MCCB, etc complete with accessories,) , 1x400 A Change over switch ,Digital MFM-02 Nos including provision of rubber mats etc. All cables termination to be done along with double compression glands and required lugs as per the direction of engineer at site ( For 1 Panel, Panel size is 5.8 Cum). Note : Before fabrication drawing approval is to be taken from Sr.DEE/M/SC-)" | — | — | — | 6,57,685.2 | |
| — | 3.10 | — | — | ||
| "Design,fabrication,supply, of LT Outdoor type panel board with 14 SWG ( Powder coated RAL 7032 ) with suitable capacity of Busbar, including supply and fixing of , digital votmeter- 02 No's, digital ammeter-02 No's with CTS, indication lamps complete with all accessories, for housing 1 x400A 4P MCCB 36KA for I/Cs, Out gogings: 08x160A 4P MCCB, 04x100A 4P MCCB, 04x63A MCCB etc complete with accessories,) , Digital MFM-02 Nos including provision of rubber mats etc. All cables termination to be done along with double compression glands and required lugs as per the direction of engineer at site ( For 1 Panel,Panel size is 3.1 Cum). Note : Before fabrication drawing approval is to be taken from Sr.DEE/M/SC-)" | — | — | — | 3,51,521.4 | |
| — | 4.15 | — | — | ||
| "Design,fabrication,supply, of LT Outdoor type panel board with 14 SWG ( Powder coated RAL 7032 ) with suitable capacity of Busbar, including supply and fixing of , digital votmeter- 02 No's, digital ammeter-02 No's with CTS, indication lamps complete with all accessories, for housing 2 x400A 4P MCCBS 36KA for I/Cs, Out gogings: 6x250A 4P MCCBs, 04x160A 4P MCCB 04x100A 4P MCCB, etc complete with accessories,) , 1x250 A Change over switch , Digital MFM-02 Nos including provision of rubber mats etc. All cables termination to be done along with double compression glands and required lugs as per the direction of engineer at site ( ( For 1 Panel, Panel Size is4.15 Cum). ). Note : Before fabrication drawing approval is to be taken from Sr.DEE/M/SC-)" | — | — | — | 4,70,585.1 | |
| — | 3.50 | — | — | ||
| "Design,fabrication,supply, of LT indoor type panel board with 14 SWG ( Powder coated RAL 7032 ) with suitable capacity of Busbar, including supply and fixing of , digital votmeter- 02 No's, digital ammeter-02 No's with CTS, indication lamps complete with all accessories, for housing 1 x 400A 4P MCCBS 36KA for I/Cs, Out gogings: 02x250A 4P MCCBs, 04x160A 4P MCCB, 04x100A 4P MCCB, 04x63A 4P MCCB etc complete with accessories,) , Digital MFM-02 Nos including provision of rubber mats etc. All cables termination to be done along with double compression glands and required lugs as per the direction of engineer at site ( For 1 Panel, panel Size is 3.5 Cumtr). Note : Before fabrication drawing approval is to be taken from Sr.DEE/M/SC-)" | — | — | — | 3,96,879 | |
| — | 4.20 | — | — | ||
| "Design,fabrication,supply, of LT Outdoor type panel board with 14 SWG ( Powder coated RAL 7032 ) with suitable capacity of 800A Busbar, including supply and fixing of , digital votmeter-02 No's, digital ammeter-02 No's with CTS, indication lamps complete with all accessories, for housing 2 x400A 4P MCCBS 36KA for I/Cs, Out gogings: 12x160A 4P MCCB,s 06x100A 4P MCCB, 04x63A 4P MCCBetc complete with accessories,) , Digital MFM-02 Nos including provision of rubber mats etc. All cables termination to be done along with double compression glands and required lugs as per the direction of engineer at site ( For 1 Panel, panel size is 4.2 Cum). Note : Before fabrication drawing approval is to be taken from Sr.DEE/M/SC-) Note: All incoming and outgoing Cable bottom entry only " | — | — | — | 4,76,254.8 | |
| — | 3.60 | — | — | ||
| "Design,fabrication,supply, of LT indoor type panel board with 14 SWG ( Powder coated RAL 7032 ) with suitable capacity of Busbar, including supply and fixing of , digital votmeter- 02 No's, digital ammeter-02 No's with CTS, indication lamps complete with all accessories, for housing 2 x400A 4P MCCBS 36KA for I/Cs, Out gogings: 4x250A 4P MCCBs, 2x160A 4P MCCB ,05x100A 4P MCCB,05x63A 4P MCCB , 04x32A 4P MCCBetc complete with accessories, Digital MFM- 02 Nos including provision of rubber mats etc. All cables termination to be done along with double compression glands and required lugs as per the direction of engineer at site ( For 1 Panel ,Panel Size is 3.6 Cum). Note : Before fabrication drawing approval is to be taken from Sr.DEE/M/SC-)" | — | — | — | 4,08,218.4 | |
| — | 2.00 | — | — | ||
| Supply and erection of 800A FP 50 KA Electrical draw out type ACB suitable for 415V AC ( Breaker consisting of motor, closing coil, trip coil, UV coil) for fixing of above panel | — | — | — | 3,14,928 | |
| — | 11.00 | — | — | ||
| Supply and erection of 400A 4 pole MCCB with 36KA breaking capacity with LSIG Micro processor based release extended rotary handle & spereder links(4 nos-02 sets), phase barriers | — | — | — | 3,71,613 | |
| — | 18.00 | — | — | ||
| Supply and erection of 250A 4 pole MCCB with 36KA breaking capacity with LSIG Micro processor based release extended rotary handle & spereder links(4 nos-02 sets), phase barriers | — | — | — | 5,34,564 | |
| — | 36.00 | — | — | ||
| Supply and erection of 160A 4 pole MCCB with 36 KA breaking capacity with LSIG Micro processor based release extended rotary handle & spereder links(4 nos-02 sets), phase barriers | — | — | — | 9,83,124 | |
| — | 25.00 | — | — | ||
| Supply and erection of 100A 4 pole MCCB with 25KA breaking capacity with Adjustable thermal magnetic release, extended rotary handle & spereder links(4 nos-02 sets), phase barrier | — | — | — | 1,54,728.75 | |
| — | 18.00 | — | — | ||
| Supply and erection of 63A 4 pole MCCBs with 16 KA breaking capacity with Adjustable thermal magnetic release, extended rotary handle & spereder links(4 nos-02 sets), phase barrier | — | — | — | 72,630 | |
| — | 5.00 | — | — | ||
| Supply and erection of 32 A 4 pole MCCBs with 16 KA breaking capacity with Adjustable thermal magnetic release, extended rotary handle & spereder links(4 nos-02 sets), phase barrier | — | — | — | 20,175 | |
| — | 1.00 | — | — | ||
| Supply and erection of 400A 4P On-load Change over switch in open execution with complete with accessories etc. | — | — | — | 22,450 | |
| — | 3.00 | — | — | ||
| Supply and erection of 250A 4P On-load Change over switch in open execution with complete with accessories etc. | — | — | — | 52,440 | |
| — | 12.00 | — | — | ||
| Digital multi function panel meter complete with CTs with RS485 port | — | — | — | 84,120 | |
| — | 9.00 | — | — | ||
| Supply and erection of fabricated small parts steel (Galavanised). | — | — | — | 8,27,955 | |
| — | 150.00 | — | — | ||
| Supply, transporting and installation of Concrete (RCC) Route Indicators at intervals of 50 meters as per instructions of engineer in charge as per Rly drawing for Power cables (LT & HT). | — | — | — | 1,80,600 | |
| — | 18.00 | — | — | ||
| Preparation and submission of completion drawings in A3size with all relevant details and measurements of executed installations, cable routings, lightingarrangements with SLD, Earth pit layout etc. Thedrawings shall be submitted in1 (Soft Copy)+ 3 (Hard Copy)duly signed by the concernedSupervisor, contractor,controlling officer and to befurnished along with bills. | — | — | — | 1,80,000 | |
| — | 20.00 | — | — | ||
| Supply, erection,connecting, testing and commissioning of 40W L E D Street light luminarie made up of pressure die cast aluminum housing with high efficiency LED as lighting source and lens with toughened glass having bottom opening separate driver compartment with IP 66 protection suitable to operate with necessary mounting accessories, clamps and hardware etc as per specification enclosed. | — | — | — | 31,500 | |
| — | 20.00 | — | — | ||
| Supply, erection,connecting, testing and commissioning of 6 0 W L E D Street light luminarie made up of pressure die cast aluminum housing with high efficiency LED as lighting source and lens with toughened glass having bottom opening separate driver compartment with IP 66 protection suitable to operate with necessary mounting accessories, clamps and hardware etc as per specification enclosed. | — | — | — | 56,200 | |
| — | 50.00 | — | — | ||
| Supply, erection,connecting, testing and commissioning of integrated T8 20W LED (indoor type) tube light fixture complete with necessary mounting accessories, clamps and hardware etc. as per specification enclosed. | — | — | — | 20,600 | |
| — | 50.00 | — | — | ||
| Supply, erection, connecting, testing and commissioning of surface mounted LED 40W luminaire batten type fitting complete with necessary mounting accessories, clamps and hardware etc. as per specification enclosed. | — | — | — | 32,800 | |
| — | 100.00 | — | — | ||
| Supply, erection, connecting,testing and commissioning of 100W LED flood light fixture complete with necessary mounting accessories,clamps and hardware etc as per Railways specification. | — | — | — | 4,22,600 | |
| — | 50.00 | — | — | ||
| Supply, erection, connecting, testing and commissioning of 150 W LED flood light fixture complete with necessary mounting accessories, clamps and hardware etc. as per specification enclosed. | — | — | — | 3,63,800 | |
| — | 50.00 | — | — | ||
| Supply, erection, connecting, testing and commissioning of 200 W LED Flood light fixture complete with necessary mounting accessories, clamps and hardware etc as per specification enclosed. | — | — | — | 4,64,100 | |
| — | 50.00 | — | — | ||
| Supply, erection, connecting, testing and commissioning of 100W LED Highbay light with PDC housing suitable for celing ( Surface/Suspended) mounting with complete with necessary mounting accessories, clamps and hardware etc, as per specification enclosed. | — | — | — | 2,96,800 | |
| — | 50.00 | — | — | ||
| Supply, erection, connecting, testing and commissioning of 120 W LED HighBay light with PDC housing suitable for celing ( Surface/Suspended) mounting with , complete with necessary mounting accessories, clamps and hardware etc, as per specification enclosed. | — | — | — | 3,53,500 | |
| — | 4.00 | — | — | ||
| Dismantling of existing Transformer including Loading, Shifting, transportation and erection, testing & commissioning of 250 KVA distribution Transformer | — | — | — | 80,000 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Tender_Booklet_E_M_SC_38_OEW_OT_2025_26_1.pdf
CORRIGENDUM
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .