REPAIR TO COMPOUND WALL AND GATES IN OD AREA UNDER GE AVADI

Amount

Demolition of brick or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work, complete all as specified and directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specially provided for (reinforcement cut as required to facilitate demolition)

Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specifed and directed

Dismantling posts or struts (wood, steel or R.C.C.) any section embedded in natural ground, including taking out embedded portion and making good disturbed ground all as specified

M&L Brickwork with fly ash Old size bricks straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed

M&L Rendering 15mm thick on fair faces of brick work or concrete surface, in cement mortar 1:6 finished the surface even and smooth without using extra cement , complete, all as specified

S&F framed work such as grills, gratings, etc., with ends of bars shoulders and/or riveted, or forged into spikes; framed guard bars; barred iron doors;ladders;framed balusters; walk waysl railings; framework of water tanks and similar work conforming to Fe 290 Gde E165

Providing precast cement concrete type B0 1:2:4 (using 12.5mm graded aggregate) as in louvres and jallies, 25mm thick (measured solid), including all mould- ings but excluding frame set in Cement Mortar 1:4 complete all as specified

M&L PCC 1:3:6 type C2 (using 40mm graded aggregate) in fdn, filling, mass concrete, PCC Block for Steel Post etc complete all as specified.

M&L Providing reinforced cement concrete type B-l, 1:2:4 (20 mm graded aggregate) in precast posts, fencing posts, straining or terminal posts, struts etc. for fencing, average sectional area exc 100 sq. cm and bot exc 250 sq cm, with orwithout chamfered angles and flat, splayed, rounded or mitred tops as directed and fixed

S&F Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) confirming Fe 410-W(Gde-E-250) quality A

S&F in repairs Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured), all as specified and directed

Restraining & resecuring including making good staples etc Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured), all as specified and directed

Dismantling fencing wire mesh, any type (Chain Link Fencing)

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed.

Supply only 3.8mm dia PVC coated GI wire chain link fencing of size 50 x 50mm mesh, weight not less than 4.5 kg/Sqm PVC coated (colour will be as decided by GE) made into mattresses lape wired laid in position complete all as specified.

S&F MS Framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete with Fe 410 -W(Gde-E- 250)-qualityA

M&L Granite 20mm thk (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.

Formwork to side of columns, fair finished surfaces of concrete square, rectangular and similar work vertical or to batter for flat surfaces complete all as specified and as directed .

M&L reinforced cement concrete type A1 1:1.5:3 using 20mm graded aggregate(Nominal mix design) for columns, pillars, piers, posts and struts complete all specified and directed.

Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

Mild steel TMT bars 6mm to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

S&F 1mm thick Mild steel, plain black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. complete all as specified and as directed.

M&L for preparation of newly plastered surface of walls and applying two coats of cement base paint over a coat of chalk whitening primer complete all as specified.

M&L for preparing newly palstered wall surfaces and applying two coat of white wash complete all as specified

M&L for preparation of new steel surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.

Mirror polishing on marble/granite/Kota stone/stone work where ever required to give high gloss finish complete all as specified.

RUBYONEBUILDERS

GURU ENTERPRISES

D Subramani and Sons