57/EDC(H)/2025-26

Carriage of Material from E.S.C. Hardoi Dump site Including loading & unloading and proper stacking

ST Pole 11 mtr. Long

PCC Pole 8.5 Mtr Long

LT SHACKLE INSULATOR WITH NUT BOLT

11 kv XLPE CABLE 3X185 sqmm.

CABLE LT ABC (3X120+1X95+1X16)SQMM

G.I. Wire 6 swg

GS Stay Set Complete 16*1800mm

11 KV pin insulator With pin

11 KV DISC insulator With fitting

MS Earthing Rod Complete 20 mm

ACSR dog Conductor

ACSR rabbit Conductor

X-Arm M.S. Angle

M.S. Top Channel

Droper Channel

MS T-Off Channel

11KV CABLE Jointing kit 3x185 sq.mm. outdoor

Erection of ST POLE 11 mtr long single pole with all accessories like clamp, nut bolt etc. (clamp, nut bolt and other necessary items provided by the contractor expect PCC pole)

Erection, Plinthing, grouting of reused/new PCC 8.5 mtr long single pole with all accessories like clamp, nut bolt etc. (clamp, nut bolt and other necessary items provided by the contractor expect PCC Pole)

Grouting of pole in deep 1/6 the length of pole in ratio 1:4:6 in cement sand brick blast.

Construction of pole plinth 300 mm x45 mm above ground level in 1:2:4 in cement coarse sand and stone grit.

Erection of ST POLE 11 mtr long double pole with all accessories like clamp, nut bolt etc. (clamp, nut bolt, M.S dropper channel, Guarding angle, LT Shackle insulator and orher necessary items provided by the contractor expect STP pole)

Grouting and Nozzling of 11 kv stay set complete including fixing of necessary clamps, accessories required including its grouting by civil material (sand,brick blast & cement). All material except stay wire shall be supplied by the contractor.

Ordinary earthing by 11 KV MS earth Rod 2500 mm long as per RESPO Schedule. All material of earthing shall be arrange by the contractor.

HOISTING OF XLPE CABLE 11 KV with GI pipe and other required material shall be supplied by contractor.

Laying of 11KV XLPE cable (3x185) sqmm by diggling of trench size 500 mm wide 900 mm after laying of brickm sand and stone slab/road crossing will be with the help 6" dia with material.

stringing & Sagging of three phase ABC (3X120+1*95+1*16) sqmm

Stringing & Sagging of three phase ACSR Rabbit/Dog conductor.

construction of T/F plinth of size 2x2x1.5m on a padding 0.25M deep in ground 1:5:10 cement sand and brick ballast on the top of padding brick work Ist class bricks of 0.95 mtr height & 0.35 mtr wall will be constructed. Rest wall should be 0.23 mtr thickm brick work in ratio 1:4 cement & cores sand in the hollow portion the sand should be filled from the ground level up to 15 centimetres below from the top of wall, cement, sand & brick Ballasts should be filled up to 15 centimentre. Two no. of channel 100x50 in length 1500 mm wil be frouded 0.35 CM.RCC wil be done with cores sand, cement and stone ballast in the ratio of 1:2:4. The T/Fs plinth should be plastered on all sides 12mm thick in ratio 1:6 by cement and cores and.(All the materail to be arranged by the contractor).

Construction of toe wall around the 11/0.4 kv S/S, fuse unit size 0.75 Mt. At Base and 0.23 Mt. At top as per RESSPO Norms by Ist class bricks in the ratio 1:6, Base concreting of the wall to lbe done in ratio 1:6:12 and plaster 12 mm thick in ratio 1:4&fabrication of fencing with wire mesh 10SWG(37mmz50mm) (all material to be arranged by contractor).

Shifting & placement of(630/100/250) kva transformer on newly constructed plinth with proper tightning of connection & commisionning.

Installation & commissioning of Distribution Box for ABC including RC & DC (Distribution Box Provided by contractor) 3-Phase LT Supply.

Instalation of 11 kv cable box indoor & outdoor

Earthing by way of Boring and lowering the B class GI pipe of 50 mm dia from ground upto water level not less than 20 mtr as per standard practice.

Looping & chopping of tree branches for clearance of HT/LT line after clearance of line throughout pieces of tree branches of site (Approx 3 Km)

Dismentling of line (Scrap conductor)

Please Enable Macros to View BoQ information