Conversion of Block B Ground Floor into male /Female ward ten Bedded at Indira Gandhi Govt. Dental Hospital

Amount

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 meters lead of area of 3 m² or below

Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: In cement mortar

Demolishing Kota Stone/marble chips flooring manually or by mechanical, means including shifiting of mulba obtained to the stacking site with in 100 lead & shifiting of total mulba obtained out of muncipal limit by mechanical means i.e trolly or tipper

Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:

1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Providing & laying damp-proof Course 40 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone agg 12.5 mm nominal size) and curing complete

Centering and shuttering including strutting, propping etc. and removal of form for:

Foundations, footings, bases of columns etc. for mass concrete.

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:4 ( 1 cement : 4 coarse sand)

Extra for brick work with common burnt clay ricks/cement concrete bricks in superstructure above plinth level upto floor five level

Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in foundations and plinth including curing in Cement mortar 1:3 ( 1 cement : 3 coarse sand)

Extra for half Brick masonry in superstructure above plinth level upto floor V level.

15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 4 ( 1 cement : 4 fine sand)

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete 2 mm thick

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/liter

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade, one or more coats on old work.

Painting with Narolac Surkasha paint outer walls two or more coat

Providing and fixing 600x600 mm double charge vetrified tile of approved brand (Kajaria, RAK, Somany) on floor and wall on 20 mm thick 1:4 & 1:3 cement mortor

Providing and fixing Anti-skid premium tiles on floor (thickness to be specified by the manufacturers) of Ist quality of (Kajaria, RAK, Somany) make in laid on 20 mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc complete.

Providing and fixing of designer tile 600x300 mm/300x450 mm over 12 mm thick bed of cement mortor ncluding ipointing the joints with white cement and matching pigment etc complete. (Kajaria, RAK, Somany)

Providing and laying gang saw cut of specified thickness, mirror polished pre- moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in-Charge. 18 mm thick

Providing edge moulding to 18 mm/16 mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite Work

Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.) Powder coated aluminum (minimum thickness of powder coated 50 microns)

Powder coated aluminum (minimum thickness of powder coated 50 microns)

Powder coated aluminum (minimum thickness of powder coated 50 microns)

Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineerin- charge. (Cost of aluminum snap beading shall be paid in basic item.)

With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg / sqm)

With ACP Sheet of 4.5 mm thickness

Providing and Fixing Aluminium powder coated grill of 7 mm thickness and 3 inch centre to centre for fixed portion with all fitting and fixture of required colour

Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, having brand logo embossed on the body/plate with double spring mechanism and door weight upto 125 kg for doors including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineerin- plate etc. complete as per the direction of Engineer-in-charge. With Stainless Steel cover plate minimum 1.25 mm thickness.

Providing and fixing aluminum round shape handle of outer dia 100mm with SS screws etc. Complete as per direction of Engineer-in-charge Powder coated minimum thickness 50 micron aluminum

Providing and fixing Brass 100mm mortice latch and lock with 6levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.

Providing and fixing of Powder coated aluminium Tower Bolt for door and window shutter with all fitting and screw complete

8" for door Shutter

6" for window shutter

Providing and fixing of Powder coated aluminium handle for door and window shutter with all fitting and screw complete

4" for window

8" for door

Providing and fixing stainless steel wire gauze of average width for aperture 1.4 mm in the both direction of wire dia 0.63 mm foir window shutter included powder coated beading with screw etc. complete job

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid.

Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar taps.

Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required white vitreous China Wash basin bowl type with bowl type depth 200 mm of approved make of brand like Hindware/parryware

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size),inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :

Providing and fixing C.P fitting Jaquar, Cera, parryware & Marc

Long Nose Bib Cock

Short Nose Bib Cock

Anglae Valve

C.P Grating 4"

C.P Extension Nipple 1"

Soap Case (Heavy)

Looking Mirroe

Providing and fixing PVC pipe including jointing with seal ring of 4 Kg /Cm² pressure of supreme or equilvant make

75 mm dia

110 mm dia

15 mm dia

Providing and fixing PVCmolduded fitting/accessiories for PVC pipes including jointing with seal ring of of supreme or equilvant make

Reducer TEE 110 mm dia to 75 mm dia

Reducer TEE 150 mm dia to110 mm dia

Plain bend 110 mm

Plain bend 150 mm

Plain bend 75 mm

Engagement of sweeper for cleaning of existing drains around the building and shifiting of unhygnic mulba obtained to the dumping site

labour engaged for dismentlling the wall tiles and shifiting of mulba obtained to the dumping site

Shifiting of mulba obtained during the construction from the dumping site to out of muncipal limit by mechanical means

Carriage of materials by mechanical transport including loading / unloading & stacking complete.

Sand/ Stone aggregate below 40mm Nominal size Crushed for an average distance of 10 kms.

KULDEEP SHARMA

harbans Lal

Bahadur Lal

HIRA LAL