Regarding procurement of Electrical materials for maintenance of Resi. / Non Resi. Building at Daman District.

Items :

Providing following type of Modular Type Accessories mounted with PVC / metallic/Wooden box, single mounting base frame covered with textured / metallic/white (1)One No. SP 6 Amp. Cat.IIIfront plate , modules erected with necessary connections as per site situation directed by Engineer In charge.

(2) One No 5 pin plug

(5) Electronic hum Free steps EME Fan regulator

(6) Fuse units 10Amp. or 16 Amp.

(7) Blank Plate Single

(8) Computer RJ-45 socket

(9) 16 Amp. SP one way switch

(10) 6/16Amp. Universal socket

(11) 6 Amps. Bell Push

(12) 6Amp. / 16 Amp. Two Way switch

(13) 6A/10A/16A/20A/25A/32A Single pole Modular MCB Switch

(14) 6A/ 10A/ 16A/ 20A/ 25A/ 32A Double Pole Modular MCB Switch

(15) 32 Amps. DP switch with Indicator

(16) 32 Amp. DP Main Switch Operating with Energy Key Tag

(17-a) For 400W / 450 watt One Module Electronic Dimmer

(17-b) For 600 / 650 watt Two module Electronic Dimmer

(17-c) For 1000 watt two module Electronic Dimmer

(19) Modular Indicating Call Bell

Supplying & erecting UPVC Mini trunking (PVC Casing-n-Capping) having double-locking arrangement with grooves, trunking of size not below 12.5 mm in height as per IS with accessories of PVC/Resin polypropylene not below 1.8 mm thick duly sealed in joint & erected on wall / ceiling of following size . 1.20mm

providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi stranded, annealed copper conductor with heat resistant PVC insulated conforms to IS 694, IEC - 227 erected in existing pipe of following size (Specifically for control panel, relays, power switchgears, motor starters & control wiring) with required size of copper lugs, nuts and bolts if required. (a) One wire 1.00 sq. mm

(b) One wire 1.50 sq. mm

(c) One wire 2.50 sq. mm

(d) One wire 4.00 sq. mm

(e) One wire 6.00 sq. mm

(f) One wire 10.00 sq. mm

(g) One wire 16.00 sq. mm

Supplying and erecting Flexible PVC insulated multi strand multi core 1.1 kv grade ISI marked copper wires of following size to be erected as directed. (b) 1.00Sq.mm Twin Twisted

(e ) 1.50 Sq.mm 3 core round PVC sheathed.

(h) 2.50 Sq.mm 3 core round PVC sheathed.

(j) 4.00 Sq.mm 3 core round PVC sheathed.

(k) 4.00 Sq.mm 4 core round PVC sheathed.

Providing & Erecting approved make following size of TV Co-axial flexible cable comprising inner conductor of solid bare copper insulated with Foam PE & Secondary conductor made of poly - Aluminium film bonded Al. Braids @ suitable coverage overall sheathed with black PVC insulation. (b) RG-6

Providing & Erecting following Shockproof tissino type accessories erected on 3 mm thick PC (Polycarbonate) sheet in PVC/ Metal/Wooden Box. erected on wall/ ceiling. (5) One no single pole 16A Switch & one no 6A/16A universal socket combined

(6) One no Single pole 16 A Switch & One no 6A/16A Universal Socket combined with indicator & fuse

(7) Bakelite ceiling, rose

(8) Bakelite lamp holder

Providing & erecting Switch board for Computer or electric apparatus consisting of following items in single board erect. ed on PVC / Metal/Wooden board concealed/open with 3 mm thick PC (Polycarbonate) / Acrylic sheet erected as directed. 1 no. 6A/16A universal plug-switch combined, 3 nos. 6A Switch, 3 nos. 6A 5 pin Plug For Tissino Type Accessories

Bakelite adopter for Holder to be erected.

Hanging bed switch / Bell push 5A erected on existing flexible wire.

Providing ISI marked 3 pin plug top. for 5/6 A., 240V.

for 15/16 A., 240V.

Decorative call bell Ting – tong box type 250 volts complete.

Supplying & erecting Electronic Type Cordless Call Bell erected on PVC/Metal board having portable bell push working on D.C. & bell on 230V A.C. supply with cells / battery

Supplying electrical insulation L.T. Tape role with ISI marked having nominal width 1.8 cms nominal length 9.0 mtr nominal thickness 0.125 mm and having self adhesive PVC

Providing & erecting insulated socket 3P+N+E with Plug16A rating which is comprised of Four pole MCB slot and insulated socket IP40

(ii) 18-20 Watts, Surge - 2KV,IP-20, conventional 4 feet

Supplying and erecting led lamps with following wattage capacity of 220 to 240 voltage, minimum 15000 burning hours life, 500 V in built-surge protection,Polycarbonate diffuser, mounting suitable for E14 / E27 / B22 lamp holders, pf >= 0.5 (A) LED Lamps integral type, with PC diffuser suitable LAMP holder (ii) 5 to 8 watts

(iv) 22-24 watts, Surge-2 KV

(B) LED Panel Light with provision for Plane front frame with translucent cover fixed to housing complete.IP20 (iv) 18 to 20 watts, 8" x 8", Surge- 2 KV

(vi) 36 watts, 24" x 24", Surge- 2KV

(vii) from 45 to 48 watts, 24" x 24", Surge-2 KV

(F) Spot Light 425 Lumens, Surge-2KV (i) 3 to 7 Watts

(H) Mirror Light 9 Watts, wall mounted minimum 1 feet long (i) 8 Watts

(iii) above 24 to 36 watts

(B) Flood Light (IP-65), Surge protection -4KV integral and ,Light must have 440VAC line supply with over-voltage (i) above 20 to 30 watts protection.

(B) Flood Light (IP-65), Surge protection -4KV integral and ,Light must have 440VAC line supply with over-voltage protection. (i) above 40 to 48 watts

(C) Post Top Lantern LED fitting comprises of finish cast aluminum spigot and spun aluminum canopy fixed with opal polycarbonate, pipe arrangement for vertical mounting driver and accessories wired upto terminal block.IP 65 (i)20- 30W

(a) LED Bollard fittings of minimum height 400 mm & dia.100mm having polycarbonate clear/milky diffuser mounted on 3mm thick aluminium finished powder coated pipe with base plate 160x160mm with erection by M8x75mm fastner with required RCC foundation.IP65 for 9watt ,surge-4kv

(c) LED Bollard fittings of minimum height 1000 mm & dia.100mm having polycarbonate clear/milky diffuser mounted on 3mm thick aluminium finished powder coated pipe with base plate 160x160mm with erection by M8x75mm fastner with required RCC foundation.IP65 for 18watt and above ,surge-4kv

Providing Approved make Triple Pole Metal Clad Switch Fuse Unit 415/500V. with HRC fuse of suitable load and neutral link confirming to I.S.S. 63 A.

providing and erecting Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 25 KA. at 415 V,having normal current rating up to 25 A to 100A. with Fixed thermal & magnetic release suitable to work on A.C. supply 50 c/s. with all internal connections, spreader tinned copper & complete erected in existing 16 G.M.S. housing. ICS=100% of ICU only

Providing and erecting Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 35 KA. at 415 V. having normal current rating 125A. with Fixed thermal & magnetic release suitable to work on A.C.supply 50 c/s. with all internal connections, spreader tinned copper & complete erected in existing 16 G.M.S. housing. ICS=100% of ICU only

Providing and erecting Approved make Three pole moulded case circuit breaker having breaking capacity ICU of 25 K.A. at 415 V having normal current rating up to 25 A to 100A. with Fixed thermal & magnetic release suitable to work on A.C. supply 50 c/s. with all internal connections, spreader tinned copper & complete erected in existing 16 G.M.S. housing. ICS=100% of ICU only

Providing and erecting Approved make Three pole moulded case circuit breaker having breaking capacity/strength ICU of 35 K.A. at 415 V. having normal current rating 125A.with Fixed thermal & magnetic release suitable to work on A.C.supply 50 c/s. with all internal connections, spreader tinned copper & complete erected in existing 16 G.M.S. housing. ICS=100% of ICU only

Providing and erecting Approved make Three pole moulded case circuit breaker having breaking capacity/strength ICU of 35 K.A. and above at 415 V. having Normal current rating 200A.with variable Thermal & magnetic release suitable to work on A.C.supply 50 c/s. with all internal connections, spreader tinned copper & complete erected in existing 16 G.M.S. housing. ICS=100% of ICU only

Providing and erecting Approved make Three pole moulded case circuit breaker having breaking capacity/strength ICU of 50 K.A. and above at 415V. having normal current rating 250A. with variable thermal & magnetic release suitable to work on A.C.supply 50 c/s. with all internal connections, spreader tinned copper & complete erected in existing 16 G.M.S. housing. ICS=100% of ICU only

Supplying KITKAT pattern porcelain cut-out fuse with base of following current capacity erected on existing block board. 100A. 500V.

providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to operate on 240 V A.C. system and having breaking capacity 10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI Mark.

Providing & erecting 240 V MCB double pole switch for motor & inductive load (C Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing box having following capacity 6 to 32 Amp.

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box having following capacity 6 to 32 Amp.

Supplying & erecting 20 Amp 10 KA ‘C Curve’ single pole MCB with 20 Amp. Plug socket, company fabricated powder coated sheet steel enclosure erected as directed with connection. Metal Clad Socket with Metal clad top.

Providing and erecting Three pole Miniature isolator A.C. 22 duty confirms to IS 13947-3 in existing box. (A) For 40Amp

(b) for 63 Amp.

Plastic enclosure fitted with DIN rail suitable for incorporating One / Two nos. MCB.

Plastic enclosure fitted with DIN rail suitable for incorporating Three / Four nos. MCB.

Providing and erecting Approved make RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and suitable for operation on 3 phase and neutral 415V,50Hz. having characteristic of quick action & tripping with all advance feature & do not incorporate any electronic component for following Max. rating erected as directed. (ii) 40 Amps. FP

(iii) 63 Amp FP

Supplying & erecting XLPE(IS:7098) (I)-88 ISI unarmoured Aluminium cable 1.1 KV.grade to be erected as directed of following size. (A) 2 core 2.5 Sq. mm

(B) 2 core 4 Sq. mm

(C) 2 core 6 Sq. mm

(D) 2 core 10 Sq. mm

Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (A) 1.5/ 2.5/4/6 Sq.mm

(B) 10 Sq.mm

(C) 16/25 Sq.mm.

(D) 35/50 Sq.mm.

(E) 70 Sq.mm.

Solder less crimping type Copper lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (A) 1.5/2.5 to 6 Sq.mm

(B) 10 Sq.mm

(C) 16 Sq.mm.

Providing and erecting Approved make Ceiling fan with double ball bearing ISI mark with condenser A.C. 23OV.50 c/s.1200 mm. sweep complete, canopy erected on existing hook or clamp with earthing. [Make shall be approved by Engineer in charge]

Providing & erecting Approved make Ceiling Fan with double ball bearing ISI mark with Condenser 230 volt A.C.50 Hz. 1200 mm sweep complete having 4 blades Aluminium body and blade sets having ornamental design shanks, canopy erected with earthing [ Make shall be approved by Engineer in Charge]

Supplying Table fan approved make A.C. 23OV, 50 c/s. 40 cm. sweep oscillating complete with 3 mtrs. of 3core round flexible wire and 3 pin plug top. [ Make shall be approved by Engineer in Charge]

Providing & erecting fresh air fan 250 mm dia with square frame make of ABS body with louvers

Supplying & erecting approved make low noise decorative exhaust fan having square frame ABS body with inbuilt lowers & square frame. 200mm with 1350RPM

250mm with 1350 RPM Cat.II

Supplying & erecting single phase approved make industrial exhaust fan suitable for medium duty ring mounted low noise operation suitable for medium duty having following dia size and maximum speed in RPM [A] 305 mm dia 900 RPM

[D] 450 mm dia 900 RPM

Supplying and erecting approved make Bracket fan of 230 volt, A.C. 50 Cy/s., 400/450 mm sweep complete erected on wall or with lead Cores and connections complete.

Supplying and erecting approved make Pedestal Circulatory fan A.C. 230 V. 50 Cy/s. 600 mm sweep and adjustable height complete with guard, & standard lead flexible wires and plug top.

Rewinding of Any fan by using super enameled copper wire and over hauling and putting in working order with original speed with guarantee for one year including credit of D.M. retained by Agency.

Replacing the bearing/ bushing of Ceiling fan and putting the fan in working order including credit of D.M. retained by Agency. (a) Bearing

Replacing condenser for ceiling fan/ Exhaust Fan / Pedestal Fan / Table Fan / Cabin Fan {Credit of D.M. retained by Agency.}

Supplying & erecting approved make time switch with single pole air break contacts suitable for 230 V.15/16A.complete with self starting motor driven clock ‘ON’ &’ OFF’ automatic arrangement at any predetermined time during each 24 hours,With nickel cadmium rechargeable battery backup erected as directed.

Supplying & erecting approved make Digital time switch having lithium cell 6 years operative and operate battery backup 1 channel day clock with 14 memory programme, suitable to operate on 240V + 5%, 16A with, floating contacts Minimum switching setup time 1 minimum & LCD display. Also comprised permanent ON/OFF switching. Programming switches & housed in fire proof thermoplastic enclosure & transparent cover erected as required with necessary connection erected as directed.

Supplying & erecting power contactor ,AC3 duty for time switch complete erected as per direction (D) 4 pole 440V 40 Amp.

HRC Fuse Contacts Set of six for (ii) 125 Amps

(iii) 200 / 250 / 320 / 400 Amps

Providing and erecting ISI marked PVC insulated PVC Sheathed Flat flexible Submersible copper cable approved make of following Size. (A) 3 Core x 1.5 Sq. mm.

(B) 3 Core x 2.5 Sq. mm.

Supply of male female 6A (Anchor / Jainex make)

Supply of masonry drill bit 5mm (joran make).

Supply of Screw Yamaha 25 X 8mm

Supply of screw Yamaha 45 X 8mm

Supply of Tester Taparia.

Supply of grip 25 X 8mm (Marsal)

Supply of cutter ( knife) big size.(Taparia)

Supply of Pilier 8"Taparia

Supply of screw Driver12" Taparia

Supply of dry pencil cell 1.5 V.D.C. Novino gold.

Supply of fornt plates clipped with base plate Anchor Roma / Toyama make (a) 2 Module.

(b) 3 Module.

(c) 4 Module

(d) 6 Module.

(e) 8 Module.

(f) 12 Module.

(g) 18 Module.

Supply of Anchor Roma Surface boxes (a) 2 Module.

(b) 3 Module.

(c) 4 Module.

(d) 6 Module.

(e) 8 Module.

(f) 12 Module.

(g) 18 Module.

DIPAL ELECTRICALS (BID ID -8534)