Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹21.1 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹22.1 L+₹97,061 (4.59%)Rejected-Finance | L2 | Rejected-Finance Rejected |
Tender Value
₹21.2 L
EMD Value
₹21,162
Closing Date
4 Nov 2024, 3:00 pmClosed
commissioner madurai corporation
Aringar Anna Maligai
Supply and erection and fabrication of electrical accessories cables distribution box bus bar panel arrangements at new shops building 12 nos in melur main road veraku mandi east side in ward 33
2024_MAWS_495869_1
E1 / Est.No. 669 / 2024 -25
Open Tender
Civil Works
Lump-sum
60 days
Madurai
Please refer Tender documents.
1 document required · 1 mandatory
₹0
₹21,162
30 Dec 2024
22 Oct 2024
4 Nov 2024
22 Oct 2024
4 Nov 2024
22 Oct 2024
Amount
Wiring with 2x1.5 sqmm (22/0.3) PVC insulated Single Core unsheathed Copper Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires with Module GI switch box in flush with wall with 6A one way module switch front plate continuous earth connection of 14SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC light Point (6 Points Per Coil) SD -314
Wiring with 2x1.5 sqmm (22/0.3) PVC insulated Single Core unsheathed Copper Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires with Module GI switch box in flush with wall with 6A one way module switch and 1 No 6A 3/2 module socket with module front plate continuous earth connection of 14SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC Plug Point (8 Points Per Coil) SD -365
Supply and fixing of single box type (philips / Havells / Eq) suitable for 4 feet 20W LED tube light with TW round blocks on wall or ceiling with 20W LED tube light with PVC unsheathed Copper leads from terminals to the fitting
Supply and Fixing of 3 Nos 6A two module 5 pin Socket, 3 nos 6A one module switch on Suitable module surface mounting Box (plastic) with moduler cover plate (plastic) on wall with earthconnection Higher end
Supply and fixing of 2 Nos 6/16A Two Moudle Socket, 2 Nos 16A one Module Switch with Moudle Cover Plate (Plastic) on Suitable Module Concealed Box (G.I) in Flush with Wall with Connection Higher End. SD 495
Supply and fixing of 20AmpsDP Plug and socket in sheet steel enclosure with 32 A DP MCB in flush with wall with earth connection. (Legrand (MDSS/Haser) (L&T ) (SD -140)
Supply and fixing of Horizontal type 4 way triple pole neutral MCB distribution board in sheet steel enclosure with 40 A 4 pole MCB isolater as incoming and 12 Nos. 6A to 32 A SP MCB as outgoing in flush with wall and making good of the concealed portion with earth connection. The MCBDB and MCB's should be with the ISI mark (lik standard make) SD. 179
Supply and run of 2 of 4 sq.mm (56/0.30 PVC insulated SC unsheathed copper conductor of 1100v grade in suitable PVC rigid pipe concealedl in wall and ceiling with continuous earth wire connection of 14 SWG TC wire and making good of the conceded Portion with suitable Colour (SD -57)
Supply and clamping of 31/2 x 25 sq.mm PVC LTUG armoured Alu. Cable on post or on wall with MS Clamps (SD-222)
Supply and clamping of 31/2 x 120 sq.mm PVC LTUG armoured Alu. Cable on post or on wall with MS Clamps (SD-222)
Supply and fixing of brass cable gland for 31/2 x 25 sq.mm PVC armoured LTUG Alu. Cable with earth connection (SD -186)
Supply and providing cable end termination of 31/2 x25 sq.mm PVC LTUG aluminium armoured cable with necessery Alu. Cable socket by crimping etc., with electrical connection complete. (SD -235)
Supply and clamping of 31/2 x 25 sq.mm PVC LTUG armoured Alu. Cable through suitable G.I pipe on wall with MS Clamps
Supply, fabrication, of 200A Capacity Dust and vermin proof cubical type metering panal board Size of 3480mm(L) x 1725mm(H) x 0.300mm (D) made up of 16 SWG CRCA sheet steel for outer body Doors, switch and KWH meters, Separation, supports and with supply and fixing of four pole MCB isolator, and re wireable fuse units with bus bar chamber complete with tinned copper flat for three phase and netrual with bus bar insulator complete with inter connection of WH meters, current carrying capacity multi standard PVC insulated copper wire between bus bar to WHM and WHM to cutout and MCB's tinned copper flat for earth bus runs all round the panel to provide earth connection by by No.8 SWG HDBC conductor to incoming Fuse and meter chamber bus The housing the accommodate 15 No's Three phase WHM 200A Fuse with 100A Neutral Link as incomer 40A FP MCB 15 No's (MDS/ Legrand/ Hager/ L&T) and with sectional cutout for 3No's of 32A fuse in 15No's as Section cutout for each service WH metering chamber cutouts chamber suitable for WHM connecting 3 phase 4 wire reading type meter chamber at the front for reading type meter chamber provided with 5mm thick transprant glass at the front for reading purpose with sealing provision by TNEB and supply the panel board should be painted two coats of High quality epoxy paint over one coat of red oxide primer with superscriptions the above cubical EB metering panel rest on Suitable angle iron base
Earthing as per the ISI specification with an earth electrode of 2.1mt class 'B' GI pipe of dia not less than 40mm, with copper earth plate of size 125mm x 50mm x 6mm, with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry . (SD -233)
Supply and run of 1 of No.8 SWG GI wire for earth connection. (SD -74)
Fabriction supply and erection of tobulor post with Truss (100mm, 80mm, 75mm) The Rate shall be include the cost of tobulor post Truss members, labour charges for manufacturing and erection and Painting etc., complete. as per departmental specification and drawings.
Fabricating supplying and fixing of pre painted galvanized iron sheets with the following specification. The materials should be of PPGI tile profile with a red colour or any other approved design 0.47 mm thick 24 guage having width 1050 mm. The sheet should be G.I.base pre painted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws,plastic washer.The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with zinc coating of Z 120 GSM paint thickness the finish should be terra cotta finish like malabar mangalore tiles finish optional matt finish. The sheet to be fixed with making suitable corrugated,cutting the sheet in to the required ssize and making ornamental designs as per the site condition and as directed by the departmental officers.
Add GST 18%
A N KANNAN (BID ID -1172992)
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .