Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.3 LAdmitted-Finance | L1 | Admitted-Finance | |
| 2 | L2₹5.8 L+₹1.5 L (34.2%)Admitted-Finance | L2 | Admitted-Finance | |
| 3 | L3₹6.3 L+₹2.0 L (46.1%)Admitted-Finance | L3 | Admitted-Finance | |
| 4 | L4₹8.2 L+₹3.8 L (88.7%)Admitted-Finance | L4 | Admitted-Finance | |
| 5 | L5₹9.6 L+₹5.2 L (120.7%)Admitted-Finance | L5 | Admitted-Finance |
| Sl No | Description | Qty | Unit | M/S P K CHAUHAN AND CO L1 | M/s MAN SINGH L2 | M/S GOVIND ENTERPRISES L3 | Perennial Contractors Pvt. Ltd. L4 | SATURN INFRATECH PVT LTD L5 | M/S S.P. & CO L6 |
|---|---|---|---|---|---|---|---|---|---|
| 1.00 | 33 KV LINE :-
9 Mtr. Long PCC Pole | 1 | Nos | - | - | - | - | - | - |
| 2.00 | 11 Meter long STP (SP-55) | 23 | Nos | - | - | - | - | - | - |
| 3.00 | 13 Meter long STP (SP-72) | 1 | Nos | - | - | - | - | - | - |
| 4.00 | ACSR DOG (0.525 x 3 + 3%) = 1.622 Kms. | 1.62 | Kms | - | - | - | - | - | - |
| 5.00 | 33 KV XLPE Insulated Al. Cable 3 x 300 sq. mm. | 592 | Mtr. | - | - | - | - | - | - |
| 6.00 | 33 KV Pin Insulators | 41 | Nos | - | - | - | - | - | - |
| 7.00 | 33 KV Disc Fitting B & S Type – 70 KN | 12 | Nos | - | - | - | - | - | - |
| 8.00 | 33 KV G.I. Pins with Nuts | 41 | Nos | - | - | - | - | - | - |
| 9.00 | 11 KV Disc Insulators B & S Type - 70 KN | 48 | Nos | - | - | - | - | - | - |
| 10.00 | ‘V’ Type Cross Arm for 33 KV | 11 | No. | - | - | - | - | - | - |
Tender Value
₹1.2 Cr
EMD Value
₹1.2 L
Closing Date
21 Jul 2020, 1:00 pmClosed
SE_EWC_AGRA
EWC_AGRA
Work of underground double 33 KV, 11 KV and L.T. CABLE laying for Railway Track Crossing, dismantling work in the route of Jawahar Thermal Project of Railway Network under E.D.D, Etmadpur, Agra
2020_DVVNL_488831_2
EWCA/T-139 (2020-21)
Open Tender
Electrical Works
Turn-key
180 days
EWC_AGRA
As per tender specification
2 documents required · 2 mandatory
₹5,000
DVVNL
₹1.2 L
30 Jul 2020
15 Jul 2020
21 Jul 2020
15 Jul 2020
21 Jul 2020
15 Jul 2020
Amount
33 KV LINE :- 9 Mtr. Long PCC Pole
11 Meter long STP (SP-55)
13 Meter long STP (SP-72)
ACSR DOG (0.525 x 3 + 3%) = 1.622 Kms.
33 KV XLPE Insulated Al. Cable 3 x 300 sq. mm.
33 KV Pin Insulators
33 KV Disc Fitting B & S Type – 70 KN
33 KV G.I. Pins with Nuts
11 KV Disc Insulators B & S Type - 70 KN
‘V’ Type Cross Arm for 33 KV
Cross Arm Holding Clamp with Nut & Bolts for Rail
‘F’ Bracket for 33 KV
E' Bracket
33 KV Armor Rod with Ferrules
M.S. Angle 65x65x6 mm, 3800 mm long for bracing with 4 nos clamps (for P.C.C. Pole)
M.S. Angle 65x65x6 mm, 4300 mm long for bracing with 4 nos clamps
M.S. Top Channel 125x65 mm, 3200 mm long with 2 nos clamps
Dropper Channel 100x50x3000 mm.x 1 No. with 2 nos clamps
P.G. clamps for Reccoon/Dog
M.S. Nut, bolt with washer
M.S. Guarding Angle 65x65x6x2300 mm x 1 Nos. with holding clamp, packing piece, nut and bolts etc. for Single Supports
M.S. Guarding Angle 65x65x6x3600 mm x 1 Nos. with 2 Nos. holding clamp, packing oiece, nut and bolts etc. for D/P, T/P & F/P Structure
"T" Off M.S. Channel 125 x 65 x 3100 mm. ( 3.100 M. @ 13.1 M / Kg. = 40.61 Kg. )
Clamp with Nut & Bolts for holding "T" Off Channel
M.S. Angle 65x65x6x2000 mm x 2 Nos. ( 4.0 M. @ 5.8 / Kg. = 23.2 Kg. )
Bracing Clamp with nuts, bolts with washers
G.I. Barbed wire
G.I. Wire No. 6 SWG
G.I. Wire No. 8 SWG
G.I. Wire No. 16 SWG
Alluminium Jointing sleeves for ACSR Dog
Stone Pad (300x300x75 mm.)
33 KV Number plate with clamp with nuts, & bolts
33 KV Danger board with clamp with nuts, & bolts
Alluminium binding wire- 6 SWG
Alluminium paint
Red oxide paint
Turn Buckle
Eye bolt 12 x 110 mm
Clamp for stud with nut & bolts
H.D.P.E. Pipe 160 mm dia
Clamps for holding of 160 mm dia H.D.P.E. Pipe
Supply of G.I. Pipe 160 mm. dia for U/G laying of 3x300 Sq. mm. 33 KV XLPE Cable below the Railway Track (Pipe to be laid by H.D.D. method)
33 KV Heat Shrinkable Jointing Kit Outdoor Type for 33 KV, 3x300 Sq. mm. XLPE Cable
Clamps for fixing of cable and cable box
Supply of H.D.PE. Pipe 160 mm. dia for U/G laying of 3x300 Sq. mm. 33 KV XLPE Cable below the Railway Track/Highway (Pipe to be laid by H.D.D. method)
Earthing of Pole by M.S. earthing Rod of 20 x2500 mm and 6 SWG earthing wire etc.
33 KV Stay Set 20 x 1800 mm
33 KV Stay clamp
33 KV Stay Insulator
Stay wire 7/8 SWG
Concreting of 33 KV Stay Rod 20x1800 mm.
Grouting of P.C.C. Pole 9.0 Mtr. long
Concreting of S.T. Pole 11.0 Mtr. long
Concreting of S.T. Pole 13.0 Mtr. long
Tree cutting compensation
Digging of Trench by excavation of earth 1.5 Mtr. deep put brick on both side, filling of sand, laying of cable as mentioned at Sl. No. 60, put the sand & brick on cable & earth ramming and dressing properly with complete job for laying 33 KV XLPE cables of sizes 3x300 Sq.mm. including cost of bricks, sand, clamps etc.
Laying of G.I. Pipe underground minimum 2.5 Meters below the Railway Track by HDD Method along with laying of 33 KV, 3x300 Sq. mm. XLPE Cable in G.I. Pipe
Laying of H.D.P.E. Pipe underground minimum 2.5 Meters below the Railway Track/Highway by HDD Method along with laying of 33 KV, 3x300 Sq. mm. XLPE Cable in H.D.P.E. Pipe
Laying of 33 KV, 3x300 sq.mm. XLPE Cable underground in trunches.
Laying of 33 KV, 3x300 XLPE Cable with H.D.P.E./G.I. Pipe on Double Pole Structure
Laying of 33 KV, 3x300 XLPE Cable in Air on Double Pole Structure & filling of cable joint kit with proper dressing.
Road Restoration charges for Pucca Road Crossing
Road Restoration charges for Kachcha Road Crossing
Cable marker
Wooden Bushes
11 KV LINE :- 8.5 Mtr. Long PCC Pole
11 Mtr. Long STP Pole (SP-55)
13 Mtr. Long STP Pole (SP-72)
ACSR Weasel Conductor (0.250x3+3% = 0.773 Kms.)
ACSR Rabbit Conductor (0.234+x3+3% = 0.724)
11 KV 3 Core Al. XLPE Insulated 3x185 Sq.mm Cable
11 KV TPMO with Fixing Clamp
11 KV Fuse set with clamp
11 KV Pin Insulator with GI Pin with Nuts, bolts & Washers
11 KV Disc Insulator B&S type (45 KN) with fitting
MS Top Channel 125x65x6mm, 2240mm with clamp, bolts ,nuts & washers
MS Channel 100x50x6mm, 2028mm Long with clamp, bolts ,nuts & washers (Dropper for fuse set )
11 KV V-Type X-arm
Clamp for fixing X-arm with Nuts & Bolts
MS Angle Iron 65x65x6mm, 2700mm Long bracing Complete with 4 Clamps
MS Angle Iron 50x50x6mm, 1000mm Long bracing Complete with 4 Clamps
T-Off Channel 100x50x1300mm with Clamp nut& bolt
MS Angle 75x75x6x2028mm (T/F base)
MS Channel 100x50x6x2028mm (T/F base)
Guarding X-arm (MS Angle 65x65x6mm /2.210 Mtr Long 5.8kg/Mtr. with clamp and nut & bolts.
Guarding X-arm (MS Angle 65x65x6mm /3.300 Mtr Long 5.8kg/Mtr.with clamp and nut & bolts.
F-Bracket with Bolt & Nuts 11KV Line
E-Bracket with Bolt & Nuts 11KV Line
11 KV Painting Number mark with paint
11 KV Number plate with Nut & Bolt
11 KV Danger Board with Nut & Bolt
Danger Board, Barbed wire including
PG clamps for weasel / Rabbit
GI Wire 8 Nos.
GI Wire 10 SWG.
GI Barbed Wire
Stone Pad (300x300x75mm)
Al. Binding wire -6 SWG
Eye Bolt
Turn Buckle
ACSR Weasel Conductor for jumpering
Al. Paint
Red Oxide Paint
H.D.P.E. Pipe 160 mm dia.
Clamps for holding of 160 mm dia H.D.P.E. Pipe
Supply of G.I. Pipe 160 mm. dia for U/G laying of 3x185 Sq. mm. 11 KV XLPE Cable below the Railway Track (Pipe to be laid by H.D.D. method)
11 KV Heat Shrinkable Jointing Kit Outdoor Type for 11 KV, 3x185 Sq. mm. XLPE Cable
Clamps for fixing of cable and cable box
Supply of H.D.PE. Pipe 160 mm. dia for U/G laying of 3x185 Sq. mm. 11 KV XLPE Cable below the Railway Track/Highway (Pipe to be laid by H.D.D. method)
Earthing of Pole by MS earthing rod of 20x2500mm. & 6 SWG earthing wire etc.
GI Stay Rod 16x1800mm
11 KV Stay clamp
11 KV Stay Insulator
Stay wire 7/10 SWG
Concreting of Stay Road 16x1800mm
Concreting of Supports (8.5 Mtr. PCC)
Concreting of Supports (11 Mtr. STP)
Concreting of Supports (13 Mtr. STP)
Tree cutting compensation
Digging of Trench by excavation of earth 1.5 Mtr. deep put brick on both side, filling of sand, laying of cable as mentioned at Sl. No. 127, put the sand & brick on cable & earth ramming and dressing properly with complete job for laying 11 KV XLPE cables of sizes 3x185 Sq.mm. including cost of bricks, sand, clamps etc.
Laying of G.I. Pipe underground minimum 2.5 Meters below the Railway Track by HDD Method along with laying of 11 KV, 3x185 Sq. mm. XLPE Cable in G.I. Pipe
Laying of H.D.P.E. Pipe underground minimum 2.5 Meters below the Railway Track/Highway by HDD Method along with laying of 11 KV, 3x185 Sq. mm. XLPE Cable in H.D.P.E. Pipe
Laying of 11 KV, 3x185 sq.mm. XLPE Cable underground in trunches.
Laying of 11 KV, 3x185 XLPE Cable with H.D.P.E./G.I. Pipe on Double Pole Structure
Laying of 11 KV, 3x185 XLPE Cable in Air on Double Pole Structure & filling of cable joint kit with proper dressing.
Road Restoration charges for Pucca Road Crossing
Road Restoration charges for Kachcha Road Crossing
Cable marker
Wooden Bushes
L.T. LINE :- 8.5 Mtr. Long PCC Pole
11 Mtr. Long STP Pole (SP-55)
ACSR Weasel Conductor (0.090x4+3%) = 0.371 Kms.
Al. XLPE 3.5x70 Sq.mm Cable
Al. XLPE 3.5x240 Sq.mm Cable
Al. XLPE 3.5x400 Sq.mm Cable
11 KV Disc Insulator B&S type (70 KN) with fitting
MS Top Channel 125x65x6mm, 2240mm with clamp, bolts ,nuts & washers
MS Channel 100x50x6mm, 2028mm Long with clamp, bolts ,nuts & washers (Dropper for fuse set )
MS Angle Iron 50x50x6mm, 1000mm Long bracing Complete with 4 Clamps
T-Off Channel 100x50x1300mm with Clamp nut& bolt
LT Painting Number mark with paint
LT Number plate with Nut & Bolt
LT Danger Board with Nut & Bolt
Earth wire clamp with bolts & Nuts
PG clamps for Rabbit/Weasel
Bolts & Nuts for Shackel Insulator
GI Barbed Wire
Stone Pad (300x300x75mm)
Al. Binding wire -6 SWG
Al Jointing Sleeves for ACSR Dog Conductor
Al. Paint
Red Oxide Paint
H.D.P.E. Pipe 160 mm dia.
Clamps for holding of 160 mm dia H.D.P.E. Pipe
Supply of G.I. Pipe 160 mm. dia for U/G laying of 3.5x70/240/400 Sq. mm. L.T. XLPE Cable below the Railway Track (Pipe to be laid by H.D.D. method)
L.T. Heat Shrinkable Jointing Kit Outdoor Type for L.T., 3.5x70/240/400 Sq. mm. XLPE Cable
Clamps for fixing of cable and cable box
Supply of H.D.PE. Pipe 160 mm. dia for U/G laying of 3.5x70/240/400 Sq. mm. L.T. XLPE Cable below the Railway Track/Highway (Pipe to be laid by H.D.D. method)
Earthing of Pole by MS earthing rod of 20x2500mm. & 6 SWG earthing wire etc.
GI Stay Rod 16x1800mm
LT Stay clamp
LT Stay Insulator
Stay wire 7/10 SWG
Concreting of Stay Road 16x1800mm
Concreting of Supports (8.5 Mtr. PCC)
Concreting of Supports (11 Mtr. STP)
Concreting of Supports (13 Mtr. STP)
Tree cutting compensation
Digging of Trench by excavation of earth 1.5 Mtr. deep put brick on both side, filling of sand, laying of cable as mentioned at Sl. No. 179, put the sand & brick on cable & earth ramming and dressing properly with complete job for laying L.T. XLPE cables of sizes 3.5x70/240/400 Sq. mm. including cost of bricks, sand, clamps etc.
Laying of G.I. Pipe underground minimum 2.5 Meters below the Railway Track by HDD Method along with laying of L.T., 3.5x70/240/400 Sq. mm. XLPE Cable in G.I. Pipe
Laying of H.D.P.E. Pipe underground minimum 2.5 Meters below the Railway Track/Highway by HDD Method along with laying of L.T. KV, 3.5x70/240/400 Sq. mm. XLPE Cable in H.D.P.E. Pipe
Laying of L.T., 3.5x70/240/400 sq.mm. XLPE Cable underground in trunches.
Laying of L.T., 3.5x70/240/400 XLPE Cable with H.D.P.E./G.I. Pipe on Double Pole Structure
Laying of L.T., 3.5x70/240/400 XLPE Cable in Air on Double Pole Structure & filling of cable joint kit with proper dressing.
Road Restoration charges for Pucca Road Crossing
Road Restoration charges for Kachcha Road Crossing
Cable marker
Wooden Bushes
L.T. Clamp with Nut & Bolts for S.T. Pole
L.T. Shackel Insulator
Loop Guard Complete 3-Phase
Spacer L.T. P.V.C.
A. B. Cable ( 3x120 + 1x95 + 1x16 Sq. mm. ) ( 0.0 x 1 + 5% ) = 0.0 Km.
Extra Suspension clamps with I-Hook (Insulated) for L.T. A.B. Cable
M.S. Angle 65 x 65 x 6 x 1000 mm. for 1 Nos. L.T. A.B. Cable hanging one side
(A)- Dismentalling of 33 KV Lines :- (Including cartage of Dismentalled material from site to concerning store of DVVNL) S.T. Pole 11.0 M long @ 130 Kg x 4 Nos.= 520.0 Kgs., P.C.C. Pole long 9.0 M Pole Nos.= 17 Nos. (mostly damaged in dismentalling), 33 KV "V" type X-arm @ 22.5 Kg x 16 Nos. = 360.0 Kg, X-arm holding clamp suitable for Rails and S.T.P. @ 2.0 Kg x 7 Nos. = 14.0 Kg. X-arm holding clamp suitable for P.C.C. Poles @ 3.0 Kg x 21 Nos.= 63.0 Kg, 33 KV Pin with nut @ 1.5 Kg x 54 Nos. = 81.0 Kg, Disc fitting for Dog conductor @ 1.5 Kg x 6 Nos. = 9.0 Kg, "F" clamp for 33 KV @ 1.5 Kg x 16 Nos. = 24.0 Kg, "E" clamp for 33 KV @ 3.0 Kg x 6 Nos. = 18.0 Kg, M.S. Channel 125x65x6 mm (Old and used), M.S. Angle 65x65x6 mm (Old and used) (B) - DISMANTALLING OF 11 KV LINE :- S.T. Pole 11.0 M long @ 130 Kg x 2 Nos.=260.0 Kgs., P.C.C. Pole 8.5 M long - 7 Nos. (mostly damaged in dismentalling), 11 KV "V" type X-arm, X-arm holding clamp suitable for Rails and S.T.P., X-arm holding clamp suitable for P.C.C. Poles, 11 KV Pin with nut, Disc fitting for Weasel conductor, "F" clamp for 11 KV, "E" clamp for 11 KV, M.S. Channel 125x65x6 mm (Old and used), M.S. Channel 100x50x6 mm (Old and used), M.S. Angle 50x50x6 mm (Old and used). (C) - DISMANTALLING OF L.T. LINE :- P.C.C. Pole 8.5 M long - 3 Nos. (mostly damaged in dismentalling), L.T. Clamp @ 1.0 Kg x 9 Nos. = 9.0 Kg
Dismentalling of Conductor :- (Including cartage of Dismentalled material from site to concerning store of DVVNL) - ACSR Dog conductor ( 0.766 x 3 + 3%) = 2.367 Km. @ 200 Kg/Km Alum. = 473.388 Kg., ACSR Rabbit conductor ( 0.157 x 3 + 3%) = 0.485 Km. + (0.0 x 1 + 3%) = 0.0 Km., Total = 0.485 Km. @ 145 Kg/Km Alum. = 70.344 Kg, ACSR Weasel conductor ( 0.096 x 3 + 3%) = 0.297 Km. + (0.0 x 1 + 3%) = 0.0 Km., Total = 0.297 Km. @ 87 Kg/Km Alum. = 25.808 Kg, ACSR Weasel conductor (0.071 x 3 + 3%) = 0.219 Km. @ 87 Kg/Km Alum. = 19.087 Kg
Dismentalling of 11 KV, 3x185 sq.mm Cable (old and used) salwaged value 10% :- (Including cartage of Dismentalled material from site to concerning store of DVVNL) -
M/s MAN SINGH
M/S GOVIND ENTERPRISES
Perennial Contractors Pvt. Ltd.
SATURN INFRATECH PVT LTD
M/S S.P. & CO
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .