Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.4 LAccepted-Finance | L1 | Accepted-Finance ok | |
| 2 | L2₹1.4 L+₹75 (0.05%)Accepted-Finance | L2 | Accepted-Finance ok | |
| 3 | L3₹1.5 L+₹16,736 (12.2%)Accepted-Finance | L3 | Accepted-Finance ok |
Tender Value
₹1.9 L
EMD Value
₹3,702
Closing Date
28 Apr 2023, 3:00 pmClosed
EE(E)LR,MTNL,ND
Room No. T-517, Fifth Floor, T.E. Building Lodhi Road, 9 CGO Complex, MTNL, New Delhi-110003.
As per tender documents.
2023_MTNL_750158_1
EE(E)LR/2023-24/4
Open Tender
Electrical Works
Item Rate
15 days
As per tender documents.
Please refer Tender documents.
6 documents required · 6 mandatory
₹590
MTNL,Delhi
₹3,702
29 Apr 2023
22 Apr 2023
29 Apr 2023
22 Apr 2023
28 Apr 2023
22 Apr 2023
Amount
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. (Group C) [Note: a) Switch & Socket makes: Anchor-Roma / Legrand-Arteor / Havells-Fabio. b) Wire makes: Havells / KEI / Polycab / Finolex]
Supplying and laying of 3 x 4 Sq. mm XLPE insulated and PVC sheathed armoured aluminium conductor power cable of 1.1 KV grade on the existing wall surface/ trench/direct in ground including excavation,sand cushioning,protective covering and refilling the trench/concrete road / coal tar road including cutting the pucca road/floor and finishing the same etc wherever required making connections and testing, saddling etc complete as reqd as per site location. (Make:Havells/Polycab/KEI/Finolex)
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc complete as required as per site requirement. (Make: Anchor-Roma / Legrand-Arteor / Havells-Fabio). a) 5/6 amps switch.
b) 3 pin 5/6 amp socket outlet.
c) 15/16 amp switch.
d) 6 pin 15/16 amp socket outlet.
Providing and fixing of the following items including dismantling the old electrical accessories (where ever required), making suitable necessary modification/arrangement (i/c petty items) for fixing the new items and making connections etc complete as reqd as per the site location given by the Engineer-in-Charge. a) 32 mm x 16 mm size pvc casing and caping. (Make: Legrand/ MK/ SGI/ AKG)
b) Capacitor 2.5 mfd (Make: Epcos/Havells)
c) Electronic fan regulator. (Make: Anchor/Cona/Havells)
d) 400 mm sweep wall fan. (Make: Orient Electric/ Havells/ Almonard)
e) 32 A DP switch with indicator (2M). (Make: Schneider Electric, Model White: CPX32DP2M_WE)
f) 28 watt T-5 Tube. (Make: Havells/Bajaj/Philips/Wipro)
g) 36 watt CFL Tube Non Retrofit Type. (Make: Havells/Philips/Wipro)
h) 7 watt, GU 10 LED spot light lamp, 230Volt, (CCT: 5700 - 6500 K) along with holder. (Make: Crompton/Osram/Philips/Havells/Bajaj)
i) 2 x 28 watt T-5 electronic ballast suitable for existing sleek T5 fittings. (Make: Havells/Philips/Wipro)
j) Insulation tape pvc. (Make: Anchor/Cona/Steelgrip/Finolex)
Supplying and fixing 4 feet LED Batten fitting with integral electronic driver and LED tube operated on 230 V 50 Hz AC supply on surface with mounting arrangement connections etc complete as reqd (System wattage: 20-22 W; Lumen output: 1850-2000 lumens). (Make: Philips / Havells / Wipro / Bajaj / Osram / Compton).
Supplying and fixing of 20 Watt LED T8 tube (single side connection) PC body,6500K in the existing T8 FTL conventional lighting fixture including dismantling the old accessories such as lamps,starter,ballast, lamp holder etc, making necessary required electrical wiring modification in the existing lighting fixtures so as to glow the above LED tubes, proper cleaning of the existing optical reflectors etc complete as required as per site location and as per conditions attached. (Make: Havells Model: Photon Ultra / Philips Master LED Tube / Wipro Model: Pro LED).
Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. (Make: Legrand/ ABB/ L&T/ Havells) a) 25 Ampere.
b) 63 Ampere.
Providing and fixing plain 16/0.20mm (0.50sqmm) twin flat flexible, FRLS PVC insulated, copper conductor cable, in PVC sleeve of suitable size on the floor/ wall, or side of the table/ door etc. as required.
Supplying of 9-10 watt LED bulkhead luminaire complete with IP65/66 protection suitable for surface and wall mounting applications including installing in existing lift shafts with minor adjustment connections,testing and commissioning etc complete as required as per site location. (Make: Philips Model: Endura LED WT202W LED6S CW PSU S2 PC / Havells Model: HEXA FT10WLED857SSYMBOPC / Wipro Model: LW07-141-XXX-57-G1 / CG Model: LBHE-10-CDL)
Supplying and fixing of 70-80 watt LED flood light aluminium die-cast housing luminaire (IP66 protection) complete with all accessories including dismentelling the old fitting (wherever required) and making suitable necessary modification / arrangement for fixing the new fitting, making connections,testing,commissioning etc complete as required as per site location. (Make: Havells/Philips/Wipro/Crompton)
Supplying and fixing of 40 Watt industrial LED well glass luminaire complete with all accessories including dismentelling the old fitting, making suitable necessary modification / arrangement for fixing the new fitting with help of metal dash fastener/Eye bolt fastener/Rawl bolt with hook fastener/J- Hook fastener, making connections, testing, commissioning etc complete as required as per site location. (Make: Havells/ Philips)
KASHYAP ELECTRICALS
Handa Electric Works
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .