Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.3 LAccepted-AOC | L1 | Accepted-AOC THE LOWEST TENDERER | |
| 2 | L2₹33.4 L+₹4.1 L (13.9%)Rejected-Finance | L2 | Rejected-Finance NOT THE LOWEST TENDERER | |
| 3 | L3₹36.5 L+₹7.2 L (24.4%)Rejected-Finance | L3 | Rejected-Finance NOT THE LOWEST TENDERER | |
| 4 | L4₹38.4 L+₹9.1 L (30.9%)Rejected-Finance | L4 | Rejected-Finance NOT THE LOWEST TENDERER | |
| 5 | L5₹39.7 L+₹10.3 L (35.2%)Rejected-Finance | L5 | Rejected-Finance NOT THE LOWEST TENDERER |
Tender Value
₹48.6 L
EMD Value
₹97,300
Closing Date
11 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE EAST MATHURA
Garrison Engineer East Military Engineer Services Mathura Cantt Mathura 281001
SPL REPAIRS TO BLDG NO T-222 (PERS LINE) AT OLD HORN LINE UNDER GE (EAST) MATHURA
2023_MES_618426_1
8200-1385/E8
Open Tender
Civil Works
Item Rate
180 days
GE EAST MATHURA
AS PER TENDER DOCUMENTS
10 documents required · 10 mandatory
₹500
GE EAST MATHURA
₹97,300
Yes
29 Nov 2023
12 Sept 2023
13 Oct 2023
12 Sept 2023
11 Oct 2023
27 Sept 2023
12 Sept 2023 - 4 Oct 2023
Amount
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing and rubbish off the premises complete all as specified and directed.
M&L for joint less glazed ceramic coloured tiles 7 to 8 mm thick, (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed bed in cement motar 1:4 complete all as specified and as directed.
All as per item Serial No 2.00 here-in-before but as in skirting/dado over and including 10mm thick rendering in cement mortar 1:3 complete all as specified and as directed.
Demolition of stone slabs of any description or thickness in floors/apron etc laid bedded and pointed in any mortar complete all as specified and as directed.
M&L for Machine cut kota stone slab flooring of size 550mmx550mm, 20-25mm thick laid over and including 15mm screed bedding in cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.
M&L kota stone slab 15-20 mm thick in riser of steps, skirting, dado and pillar in the same alignment of flooring laid over and including 10 mm tick rendering in cement mortar 1:3 and jointed with gray cement and pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.
M&L for Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete as specified and as directed.
Demolition of brick work or stone boulder masonary built in cement mortar including all quoins arches pillars etc. but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and as directed.
M&L for Brick work using old size fly ash Bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.
Taking down cement plaster on brick walls and concrete surface including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed.
M&L for providing damp proof layer in two coats of acrylic polymer coating consisting of 1 part of acrylic polymer liquid mixed with 2 parts of cementious powder applying at the rate of 1.40 Sqm/ Kg of mix per coat. Second coat should be applied after 4-6 hrs of first coat, 5 days curing is to be carried out to the surface before providing plastering complete all as specified and as directed. Note : Make Asian paints/Dr Fixit/STP/CICA as approved by GE.
M&L for rendering 10 mm thick on fair faces of bricks or concrete surfaces as in ceiling surfaces in cement mortar 1:3 finish the surface even and smooth without using extra cement complete all as specified and as directed.
M&L rendering 15mm thick on other than fair face of brick work or concrete surface in cement mortar 1:4 mixed with liquid water proofing compound as per manufacturers instructions finished even & fair complete all as specified and as directed. Note :- Liquid WPC shall be measured & paid seprately under relevant item of this BOQ.
M&L for rendering 10 mm thick on fair faces of brick work or concrete surface in cement mortar 1:6 finished even & fair complete all as specified and as directed.
M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.
M&L for preparation of newly plastered surface of walls providing 1mm thick wall care putty and applying two coat of oil bound distemper over and including a coat of primer complete all as specified and as directed.
M&L for preperation of newly plastered surfaces of wall and applying one coat of alkali resistant primer complete all as specified and as directed.
M&L for applying two coats of exterior emulsion paint Apex complete all as specified and as directed.
Supply only liquid water proofing compound complete all as specified and as directed.
Taking down Chowkhats or frames with shutter without taking off shutters from the frames not exc. 1.5 sqm each complete all as specified and as directed.
Taking down Chowkhats or frames with shutter without taking off shutters from the frames exc. 1.5 sqm but n exc 4 Sqm each complete all as specified and as directed.
S&F Pressed steel frames of size 125x60 mm made out of 1.25mm steel sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete as specified and as directed.
M&L for cement concrete 1:3:6 type C-0 (using 12.5 mm graded stone aggregate) as in bed blocks for fixing hold fasts and filling of pressed steel frame complete all as specified and as directed.
M&L for preparation of new steel surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamal paint over a coat of red oxide primer complete as specified and as directed.
S&F 35 mm thick factory made Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.
S&F 35 mm thick factory made second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) supplied and fitted to chowkats complete all as specified and as directed.
M&L for preparation of new wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over and including a coat of pink primer complete all as specified and as directed.
S&F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples complete as specified and as directed.
S&F factory made steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay complete with glazing bars dovetailed or welded fixed to wall complete all as specified and as directed.
S&F factory made steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay complete without glazing bars dovetailed or welded fixed to wall complete all as specified and as directed.
S&F 4mm thick, plain sheet glass ordinary quality and glazing with oil putty/wooden beading in square n exc 0.5 sqm in each pane complete all as specified and as directed.
S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts 250 mm long of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed.
S&F 150mm size aluminium handles fabricated type anodised complete all as specified and as directed.
S&F 150mm size aluminium anodized barrel tower bolts of extruded section and fixed complete all as specified and as directed.
S&F 300mm, mild Steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.
S&F aluminium alloy, anodised Floor door stopper and tongue with hard drawn steel spring hard overall length of cover plate 150mm complete all as specified and as directed.
S&F in repair 25 mm dia stainless steel tubular drapery rod cut to size and fixed in position including fixing brackets stop roller end caps etc complete all as specified and as directed.
Taking down carefully aluminum/copper point wiring (light ,fan, socket any type, power, bell etc.) complete including fixtures & fittings (such as ceiling rose, socket, Pendent, light fittings, regulator, etc) and removing the material from site and making good the disturbed surfaces of walls ceiling etc complete all as specified and as directed.
Taking down carefully by Submain wiring of any type making good the disturbed surface to match with existing surface complete all as specified and as directed.
Taking down old unserviceable existing SPN/TPN DB/enclousers any size and type/any descriptions as iron sheet scrap including MCB any type/size and making good disturbed surface/wall as per existing complete all as specified and directed.
M&L for Point wiring with 1.5 Sqmm (nominal area) single core PVC insulated unsheathed (FRLS) cable, multi-stranded, copper conductor, in universal colour code with & including suitable size of rigid non-metallic PVC conduit (not less then 20mm dia medium grade) and its all accessories complete concealed in wall/ceiling/roof etc incl cutting & chases (making good all to the disturbed surfaces as per existing) including modular flush metal boxes with cover plate and frame for mounting modular switches, sockets, regulators etc including earth wire of PVC insulated (FRLS) copper conductor multistranded of 1.5 Sqmm size in green colour complete all as specified in current SSR Part-I & II & directed by the Engineer-in-Charge for the followings:-
One light/fan/exhaust fan point controlled by one way switch 5 amp complete all as specified and as directed.
One 3 pin 5 Amps socket point controlled by one way switch on same board complete all as specified and as directed.
One 3 pin 5 Amps socket point controlled by one way switch on independent board complete all as specified and as directed.
One light point controlled by two way switch 5 amp complete all as specified and as directed.
All as per item No. 41.00 here-in-above but for 3pin/5pin 16Amps socket point controlled independently, with 4 Sqmm PVC insulated & unsheathed (FRLS) copper conductor cable independent Point wiring complete all as specified and as directed.
Supply and Fixing Modular switch 6 Amps single pole one-way, 1 Module complete all as specified and as directed.
Supply and Fixing Modular switch 6 Amps single pole two-way, 1 Module complete all as specified and as directed.
Supply and Fixing Modular switch 16 Amp single pole one way, 1 Module complete all as specified and as directed.
Supply & Fixing Modular fan Regulator electronic step type 2M complete all as specified and as directed.
Supply and Fixing Modular socket 2-in-1, 5 pins 6 Amps , combined 2 Module complete all as specified and as directed.
Supply and Fixing Modular socket 2-in-1,3 and 5 pins 6 /16 Amps, combined 2 Module complete all as specified and as directed.
S&F ceiling rose surface bakelite 65mm x 50mm three terminals complete all as specified and as directed.
S&F lamp holder, PVC/polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed.
S&F indoor decorative ultra slim surface/Wall mounted LED batten tube light fitting with polycarbonate channel housing & integrated electronic driver,energy efficient, 140V-270 volts,co- related colour temperature (CCT) of 6500K, >100 Lm/Watt complete with all accessories internally pre-wired with and including 1 x 20 watt LED tube and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and as directed.
Supply & fix LED lamp 9 watt, suitable for B22 type holder, natural white complete all as specified and as directed.
Taking down the ceiling fan fan of any sweep carefully from its installed position, dismantling complete with down rod, replacement of capacitor, rubber wheel bush and cleaning of all dust, applying grease for bearings, reassembling the fan and blades, painting of fans and down rod with synthetic enamel white paint by spraying a single coat including filling cavities with filler, writing MES No with balck paint and keeping a side safely and hanging/refixing in position and connecting up including provision of 3 core twisted flexible copper conductor cable of size 0.75 Sqmm from ceiling rose to connector of fan and testing on completion complete all as specified and as directed. Note : The spare parts capacitor & rubber wheel bush shall be paid separately under relevant item of this BOQ.
Dismantling the unserviceable ball bearing and supply and fixing ball bearing suitable for ceiling fan/Exhaust fan complete all as specified and as directed.
Material & labour for removing the defective ceiling fan winding upto 1200mm/1400mm sweep and rewinding with super enamelled copper wire of existing gauge, applying insulation varnish, pre heating and binding with empire tubes, crimple sheet etc. as required for rewinding complete all as specified and as directed
Supply & fix LED bulk head with PDC aluminium housing and milky diffuser capacity 10 watt complete with all accessories and connection complete all as specified and as directed.
S&F of 30W LED building security light fitting with lens & driver, powder coated pressure die cast aluminium, top opening and maintainable with heat resistance toughened glass, built-in Short-Circuit Protection, Over voltage Protection and Surge Protection, IP-65 proction with luminaire efficiecy of greater than 80Lumen/Watt, Colour rendering (CRI) of ≥ 70 and co- related colour temperature (CCT) of 5700K (±500K) . The luminaire should have 10 KV surg protection, PF ≥ 0.9 and total harmonic distortion of THD ≤ 10%, voltage range of 140-280V with and including 30W LED tube all connections complete all as specified and as directed.
S&F building security light bracket made out of 40mm dia medium grade GI pipe of 1.2 m length bent to required shape suitable for fixing street light fitting on Steel tubular pole including two Nos clamps made out 40mm X 6mm flat with suitable nuts and bolts including applying two coats of aluminium paint over a coating of red oxide primer complete all as specified and as directed.
M&L for Sub Main Wiring with two runs single core 10 Sqmm PVC insulated unsheathed (FRLS) cable with multistranded, 1100 volts grade copper conductor drawn in suitable size of rigid non-metallic PVC conduit (not less then 25mm dia med gd) and its all accessories complete concealed in wall/roof incl cutting & chases( making good all to the disturbed surfaces as per existing) with and including 10 sqmm copper green colour earth wire complete all as specified and as directed. Note: Two runs 10 sqmm, one run of 10 sqmm (P&N) earth wire & One run of PVC conduit shall be measured as one unit length.
S&F TP&N Vertical Loadline distribution board, 4 Way, Double door, sheet steel, phosphatised, powder coated with Copper bus-bar 200Amp, two neutral link, earth bar and din rail ,blanking Plates, cable ties for cable management, 440 V, 4 way including fitting with following MCCB & MCBs with connection complete all as specified and as directed:- (i) MCCB 160 Amps, 4 pole, 16 KA - 01 Nos (ii) MCB SP 63 Amps - 10 Nos. Note : MCB & MCB/MCCB DBs shall be of same make. DB shall be fixed in flush pattern by cutting the wall and making good disturbed surface as pe directed & rate shall be included in the items.
S&F in replacement sheet metal enclosure MCB distribution board, SPN 12 Way, Double door, phosphatised, powder coated with 200Amp rated bus-bar, neutral link, earth bar and din rail , cable ties for cable management, 240 V complete all as specified and as directed.
S&F sheet metal enclosure MCB distribution board, SPN 8 Way, Double door, phosphatised, powder coated with 200Amp rated bus-bar, neutral link, earth bar and din rail, cable ties for cable management, 240 V complete all as specified and as directed.
S&F in replacement MCB SPN 40-63 Amps, 'C' series, breacking capacity 10KA, 240V complete all as specified and as directed.
S&F in replacement MCB SP 6-32 Amps, 'C' series, breacking capacity 10KA, 240V complete all as specified and as directed.
M&L for modify holes/cutting holes for air ducting of exhaust fan in circle/square shape or as per site requirement into or through concrete walls built in cement mortar of superficial area exc 400 sqcm but n exc 0.10 sqm to a depth of 30cm including making good in cement 1:3 or cement concrete 1:2:4 type B1 and cover old hole as required and rubbish off the premises complete all as specified and as directed.
S&F exhaust fan 250mm sweep sturdy engineer plastic body complete with louvers, AC 230 Volt single phase 50 Hz supply and including connecting up with twin core twisted flexible copper conductor cable of suitable size 0.75 Sqmm complete all as specified and as directed.
Material and labour for Earthing complete with GI earth plate 600mm x 600mm x 6 mm thick electrode buried directly in ground (earth pit not less then 2.25 metres deep below ground level ) with top edge of the plate not less then 1.5 metres below normal ground level connected to GI wire 4.0 mm as earth lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of MES schedule Part-I and incl 15 mm bore light grade GI protection pipe (upto 7.5 metres beyond outer edge of earth pit) PCC M-10 grade (Nominal Mix) using 40mm graded stone aggregate in pit with 40mm thick RCC cover in reinforced cement concrete M-15 grade (Nominal Mix) using 20mm graded stone aggregate, reinforced with 8mm dia bar both way @ 150mm c/c, watering arrangement with funnel and wire mesh and 20 mm bore light grade GI watering pipe, common salt and chaarcoal filling, necessary excavation and earth work complete.
M/S CHAUDHARY CONSTRUCTION
Ahmed constructions
M/s Orient Traders
ARCHI ENGINEERS
M/s Hoti Lal Contractor
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .