Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.6 LAccepted-Finance WARD NO 20 NEAR BMS OFFICE PARASIA DISTT CHHINDWARA M P PIN 480441 | PARASIA | CHHINDWARA | MADHYA PRADESH | 480441 | L1 | Accepted-Finance Bidder is L1 and has quoted lowest item rates overall | |
| 2 | L2₹1.7 L+₹16,284.94 (10.3%)Rejected-Finance AT LAMTIBAHAL PS BRAJRAJNAGAR DIST JHARSUGUDA PIN 768230 | BRAJRAJNAGAR | JHARSUGUDA | ODISHA | 768230 | L2 | Rejected-Finance Bidder is Quoted Higher Rate | |
| 3 | L3₹1.8 L+₹24,350.03 (15.4%)Rejected-Finance BEHIND FOOTBALL GROUND RAWANWARA PARASIA DISTT CHHINDWARA M P | CHHINDWARA | MADHYA PRADESH | 480441 | L3 | Rejected-Finance Bidder is Quoted Higher Rate | |
| 4 | L4₹2.0 L+₹41,874.82 (26.5%)Rejected-Finance | L4 | Rejected-Finance Bidder is Quoted Higher Rate |
Tender Value
₹3.3 L
EMD Value
₹4,200
Closing Date
21 Dec 2024, 5:00 pmClosed
Staff Officer (Civil), Pench Area
Staff Officer (Civil), AGM Office, Pench Area, P.O. Parasia, Dist. Chhindwara (M.P.) 480441
Making shed and 4 Nos. Earth Pit at Jhurrey Sub Station under Nehariya Sub Area.
2024_WCL_323157_1
pe3350-civ-s-e047-2024-25
Open Tender
Civil Works - Others
Item Rate
30 days
NEHARIYA SUB AREA
As Per NIT
3 documents required · 3 mandatory
₹4,200
30 Jan 2025
11 Dec 2024
23 Dec 2024
11 Dec 2024
21 Dec 2024
11 Dec 2024
11 Dec 2024 - 18 Dec 2024
Amount
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (Not exceeding 1.5 m in width or 10 Sqm on plan) including dressing of sides and ramming of bottom,lift upto 1.5 m including getting out of excavated soil and disposal of surplus excavated soil as directed within alead of 50 m. All kind of soil
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from cum natural sources: 4 graded stone aggregate 20 mm nominal size derived from natural sources).
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
Supply and erection of approved make safe earthing electrode consisting pipe-in?pipe technology as per IS 3043-1987 made of corrosion free G.I. pipes with constant ohmic value surrounded by highly conductive compound with high charge dissipation suitable for effective and maintenance free earthing in earth pit of minimum bore dia. 150mm size, as mentioned below With 3 metre pipe of 80mm outer dia., 40mm inner dia and 14mm terminal dia. In soft/hard rock/marshy soil with 50 kgs. (two bag) back filling bentonite compound UL listed and confirm to relevant International/Indian standards around electrode upto ground level.
Providing back filling bentonite compound suitable for safe earthing device. The product should be UL listed and confirm to relevant International/Indian standards.
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 15 mm nominal dia Pipes
Providing and fixing PTMT bib cock of approved quality and colour. 15mm nominal bore, 86 mm long, weighing not less than 88 gms
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:6 (1 cement : 6 coarse sand)
12 mm cement plaster of mix 1:6 (1 cement: 6 fine sand)
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge In cement mortar
Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m.All kinds of soil
Total impact of GST for the purpose of CTC
SANJAY SINGH (BID ID -1110492)
ASIM CONSTRUCTION COMPANY (BID ID -1110757)
ANUJ KUMAR RAI (BID ID -1110096)
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .