SPECIAL REPAIR TO ROOF, LEEKAGE SEEPAGE TO WALLS / CEILINGS OF PART OF BLDG NO P-85 UNDER GE HADDO, PORT BLAIR

Amount

Taking down cement screed plaster on roof top, brick or stone walls etc, including raking out joints, hacking for keys, scrubbing down with water etc complete all as specified and directed.

Dismantling of cement concrete (Un reinforced) of any description as in padding concrete ( Other than ground floors) all as specified and directed.

M&L for providing cement concrete type B0 1:2:4 of thickness 25 - 50mm (12.5mm grade stone aggregate) as in padding and benching & filleting complete all as specified and directed

M & L for screed plaster 15mm thick plaster on RCC roof slab with CM (1:4) mixed with liquid water proofing compound @ 200ml per 50 kg bag on fair faces of concrete surface finished even and smooth without using extra cement complete all as specified and directed (Note WPC shall be measured and paid seperately)

Supply only liquid water proofing compound complete all as specified and directed.

M&L for a coat of cold applied bituminous primer over cleaned surface @ 0.30 Kg/Sqm and applying one coat of hot blown bitumen 85/25 grade @ 1.2 Kg/ Sqm over primer followed by APP modified polymeric membrane 3mm thick, minimum wt not less than 3.0 Kg/ Sqm reinforced with polyester non-woven fabric (weighing not less than 150 gms/sqm) laid as per the manufactures instruction with side over lap of 100mm & end over lap of 150mm & tucked into the chases on vertical surfaces over that applying one coat of hot blown bitumen 85/25 grade @ 1.20 Kg/Sqm & painting over APP membrane sheet with aluminium paint @ 0.10 Kg/Sqm complete all as specified and directed.

Taking down GI tubing 20mm dia, with connections complete all as specified and directed

Taking down GI tubing 25mm dia, with connections complete all as specified and directed.

Taking down GI tubing 40/50mm dia, with connections complete all as specified and directed.

M & L for 20 mm GI tubing, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified.

M & L for 25 mm GI tubing, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified.

Supplying and laying of 25mm outer dia CPVC pipes SDR 13.5 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors complete all as specified.

Supplying and laying of 32mm outer dia CPVC pipes SDR 13.5 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors complete all as specified.

M & L for 40 mm GI tubing, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified.

M & L for 50 mm GI tubing, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified.

Dismantling water tanks exc 500 & n exc 1000 ltrs and removing to store complete all as specified and directed.

S&F 1000 Ltrs PVC tank rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed.

Disconnecting exc 500 & n exc 1000 ltrs existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and directed.

S & F 25 mm bore dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms) complete all as specified and directed.

S & F 20 mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed in repairs complete all as specified and directed.

S & F 25 mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed in repairs complete all as specified and directed.

Cutting holes exc 100 Sq cm but n.exc 250 Sq cm into or through reinforced cement concrete slabs, chajjas, etc. reinforced or otherwise complete all as specified and directed.

Cutting channels, grooves or rebates with or without reinforcement n exc 15cm girth, and trimming surface for embedding the APP membrane sheet into the wall column surface complete all as specified and directed.

Dismantling of structural steel of any description not otherwise provided for all as specified

M & L for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe-410-W(Gde-E-250) quality-A complete all as specified.

S & F Rolled sections as in main and cross beams, hip and jack rafters; purlins, pole where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates using structural steel of Fe-410W (Gde E-250 quality A) complete all as specified and directed.

M & L for preparing of new of previously untreated steel surface of any description, not otherwise described, over 10 cm width or girth applyig two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

Dismantling plain or corrugated steel sheeting any guage, thickness including nainital or similar pattern roof covering complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

M & L aluminium wind tie of any size fixed with self tapping screws of size 50/75mm with integral EPDM washer in roof covering complete all as specified and directed.

Dismantling of ceiling boarding in description fixed in any position complete all as specified and directed.

M & L for seamless gypsum board designer false ceiling 12mm thick including for any sunk or raised moulding with 25mm long self drilling/ tapping screws having philips head with joining compound and 48mm wide fiber tape to provide seam less finish and including GI frame work of seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flange of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm c/c intermediate channel 0.9mm thick having two equal flanges of 15mm suspended from soffit at approx 900mm c/c with GI cleats and steel expansion fasteners with and incl ceiling section ( not exc 1.2m length) of 0.55mm thick having kurled web of 50mm an flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting across the intermediate channel at 457mm c/c incl hangers 6mm dia GI adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete and finally applying two coats of oil bound distember with roller finish over a coat of primer complete all as specified and directed.

M&L for designer cornices all round the corners of seamless false ceiling all as specified and directed

M&L for anodised aluminium snap grid frame work for false ceiling 605mm x 605mm using aluminium anodised sections as specified in SSR Part-I-1991 including cutting, drilling, jointing etc complete including provn of 3mm dia GI hangers wire suspenders fixed with adjustable connectors and providing 4mm thick E-Boards (Classic) 605mm x 605mm size duly applied with two coats of oil bound distemper over a coat of primer all as specified.

Taking down chowkats or frames with shutter (With out taking off shutters) exc 1.5 Sqm but n.exc 4 sqm each complete all as specified and directed.

M&L for powder coating (minimum thickness of powder coating 50 micron) aluminium partition, window and door with frame and shutters fully or partly glazed , sliding / openable / fixed / fully glazed and pannels with 12mm thick pre-laminated partical board including all fittings (supply only floors spring, glass, Imax hinges, partical board, gauze will be measured separately) the size of aluminium sections shall be all as specified in relevant IS code and SSR Part-I complete all as specified and directed.

Supply only 12 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination in cup board shutters all as specified and directed.

Supply only 5.5 mm thick sheet glass, ordinary quality in squares n.exc 0.50 sq.m in each pane complete all as specified and directed.

Taking down cement plaster on concrete or brick masonry surface including raking out joints, hacking for keys scrubbing down with water etc to receive plaster all as specified.

M&L for rendering 10 mm thick in CM 1:3 on surface of ceiling finished even and smoth without using extra cement all as specified.

M&L for rendering 10mm thick in CM 1:6 on fair faces of precast concrete block masonry or concrete surfaces finished even and smooth without using extra cement all as specified and as directed.

M&L for rendering 15mm thick in CM (1:4) including mixing water proofing compound on concrete /brick masonary surfaces finished even and smooth without using extra cement all as specified and as directed. Note:- Supply only water proofing compound shall be measured and paid separately under relevant item complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceiling and applying two coats of oil emulsion distemper over a coat of primer and over a coat of wall care putty of minimum 1mm thickness all as specified.

M&L for preparation of new plastered surfaces of ceiling and applying one coat of white wash all as specified.

M&L for preparation of new plastered surfaces of walls and applying two coats of plastic emulsion over a coat of primer and over a coat of wall care putty of minimum 1mm thickness all as specified.

M&L for preparation of new plastered surfaces of wall and applying two coat of antifungal exterior emulsion over a coat of primer all as per manufacturers instruction complete all as specified and directed.

Cutting out existing cracks in concrete surfaces / masonary wall / slab forming grooves of 25mm x 40mm size, cleaning the groove thoroughly with blower, applying primer coat of the mix of IPH CC or Hydroseal Siliconate Epoxy Resin & Hardner in equal proportion with spray gun suitable brush to form a film on the surface of groove, filling the groove with putty made by mixing IPH CC in equal propotiol of make Harjas Coating and Polymers or Hydroseal Siliconate Epoxy resin,hardner and admixture in the proportion of 1:1:2 and finally applying the sealing coat of the same mix and in the manner primer coat is applied with following min. coverage per running metre length of groove. Note: The unit rate quoted shall be deemed to include the cost of scaffolding/staging etc. as necessary to execute the work.

Material & Labour for complete removal of existing treatment on plastered wall surface and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed.

M&L for complete removal of existing treatment on plastered wall surface and applying two coats of plastic enmulsion over a coat of primer incl min 1 mm thick wall care putty all as specified and as directed

Cutting down vegetation growths like plants/trees of girth n.exc. 60 cm from roof tops/ parapet walls, external walls of buildings, chajjas, wall junctions including removal of roots and taking out carefully possible quantity of concrete in roofs embedded in walls/slab surfaces and applying TUFALO chemical (herbal medicine) to arrest further growth and making good the disturbed surfaces with PCC (1:1.5:3) type B-1 or in cement mortar (1:2) upto 12 metre height complete all as specified and directed. Note: The unit rate quoted shall be deemed to include the cost of scaffolding/staging etc. as necessary to execute the work.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for non-skid Ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. and including 15mm thick layer of screed bed in cm 1:4 on floor surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. Make : Johnson, kajaria, Orient,Somany

M&L non porous outdoor elevation coloured joint free tiles in vertical surface 350x 250x 7 mm/ 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over Screed bed or bedding layer of mortar 10 mm thick in Cement mortor 1:3 for laying floor finishes complete all as specified and directed.

M&L for light shade vitrified ceramic tiles minimum 8 mm thick (square/ rectangular) polished area of each tiles n. exc 0.36 Sqm (600x600mm) in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed of cement mortar 1:4 complete all as specified and directed

M&L for preparing old surfaces of wood and wood based material exceeding 10cm in width or girth and applying one coat of synthetic enamel paint all as specified and as directed.

M&L for preparation of old surfaces of steel surfaces exceeding 10cm width or girth and applying one coat of synthetic enamel paint all as specified and directed by Engr-in-Charge.

S & F for Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and directed.

S & F for Stainless steel curtain rod 25 mm dia including stainless steel end balls and fixing brackets etc., all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed.

S&F 18 mm thick rubber wood pemet box., in narrow widths n. exc l5cm each, rebated or flat edged as specified and directed by Engr in Charge. Make: RUBCO or its equivalent.

S&F 18 mm thick rubber wood showcase/shelves etc., in narrow widths n. exc l5cm each, rebated or flat edged as specified and directed by Engr in Charge. Make: RUBCO or its equivalent.

M & L for preparation of new wooden surfaces and applying melamine polish through the process of sanding with wood sanding paper of size 60 & 80 and applying wood filler mixed with NCD thinner including applying wood putty on shabby/ nailing area and sanding with sand paper of size 120 and applying sealer and walnut colour stainer and sanding with sand paper of size 320 and melamine polishing wiyh spray application and again sanding with 400 sand paper and finally applying silicon of make Waxpol with soft fine cloth for better shining and finishing complete all as specified and directed.

M & L for preparation of old wooden surfaces and applying melamine polish through the process of sanding with wood sanding paper of size 60 & 80 and applying wood filler mixed with NCD thinner including applying wood putty on shabby/ nailing area and sanding with sand paper of size 120 and applying sealer and walnut colour stainer and sanding with sand paper of size 320 and melamine polishing wiyh spray application and again sanding with 400 sand paper and finally applying silicon of make Waxpol with soft fine cloth for better shining and finishing complete all as specified and directed.

Taking down copper/aluminium point wiring(light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.

Taking down fuse Unit/DBs 415 Volt/230 Volt incl MCBs/MCCB

Taking down old aluminium sub main wiring of any size.

Taking down existing light fittngs any type and any capacity.

Material and labour for point wiring for one light point or one fan point controlled by one switch with using 1.5 Sqmm (nominal area) stranded copper conductor, single core, PVC insulated & unsheathed cable, 1100 volts grade in and including concealed / surface as possible PVC conduits (Medium grade) of size not less than 20 mm dia incl proper colour coding Phase -red/yellow/blue, neutral- black and earth green all as directed with sunken type pressed steel terminal box and junction boxes 1.6mm thick of suitable size, duly painted with one coat of red oxide primer and two coats of black bituminous paint for mounting fittings and wiring to be terminated in pressed steel sunken boxes with and including all accessories for modular fittings like cover plate with frame and using 1.5 Sqmm (nominal area) stranded copper conductor single core conductor, PVC insulated & unsheathed cable as in earth wire connected to common earth dolly complete for one light/fan point all as specified and directed. Make: Gloster/Havells/Anchor/ Polycab/Finolex

Description same as per Srl item No 70 above but One light/fan point controlled by one switch 5 Amps one way.

Description same as per Srl item No 70 above but two light points controlled by one switch 5 Amps one way.

Description same as per Srl item No 70 above but, point wiring for 5 pin switch socket outlet , 6 Amps on independent board.

Description same as per Srl item No 70 above but, point wiring for 5 pin switch socket outlet , 6 Amps on same board.

Description same as per Srl item No 70 above but,One bell point controlled by one bell push switch 6 Amps one way.

M&L for Point wiring complete with 4 Sqmm (nominal area) single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor (with colour coding of Red/Blue/Yellow for phase and Black for neutral), drawn through and including rigid non metallic PVC concealed conduit of suitable size not less than 20mm and accessories concealed in walls/ceilings etc., including provision of PVC insulated 4 Sqmm FRLS cable with copper conductor green in colour for earth continuity and connected to common earth dolly and sunk in CI boxes/pressed steel terminal boxes 60mm deep made out of 1.6mm thick MS sheet duly painted with two coats of anti-corrosive paint outside and with two coats of aluminium paint inside and covered with suitable size of modular cover plates for socket outlet etc, all as specified and as directed for ONE 16A SOCKET OUTLET point controlled by one, one way 16 Amps switch on independent board.

S & F for switch modular type, 6 Amps 1 module, 230 volts AC circuit complete all as specified and directed. Make : Roma (Anchor) /Legrand/ Simens/ Havells

S & F Switch piano modular type , flush type, single pole one way 15 amps all as directed. Make: Anchor/ Cona/ Legrand

S & F for socket outlet modular type 1 way 6 Amps, 3 pin, flush type 230 volts AC circuit complete all as specified and directed. Make : Roma (Anchor)/ Legrand/ Simens/ Havells.

S & F Socket outlet 2 in 1 modular type, 3 pin, 5 and 15, flush type, universal all as directed. Make: Anchor/ Cona/ Legrand.

S & F bell push switch modular type, flush type, single pole, 5 Amps, 240 volts AC all as directed. Make: Anchor/ Cona/ Legrand.

Supply & fix AC starter switch of capacity 25 Amps working on 240 volts ACsupply , with 15 Amps plug top and 15 Amps Sockets suitble for air conditioner Make : Crabtree Model No : ACTO252504

S & F communication modules for tele socket RJ 11 2 Gang Tele socket sap code No.ACAKRTW112. Make: Havells (crabtree)/ Anchor/ Bajaj

S & F communication modules for TV socket sap code No.ACAKTOW000. Make: Havells(crabtree)/Anchor/Bajaj

S & F for ceiling rose, 3 phase, PVC polycarbonate, isolated body complete all as specified and directed.

S & F Electric Bell, Ding dong type working on 230 volts AC supply all as directed. Make: Anchor/Cona/Legrand.

Taking down carefully ceiling fan of any make, size from its location, handed over to AGE E/M store yard without any damage

S & F BLDC 5 star rated ceiling fan metallic body ISI marked 1200 mm sweep, 220V Ac, 50 Hz complete with all accessories. Make: CG Model No : ENERGION Riviera with out remote 32 watt or equvalent make of Havells/Orient, Usha /Bajaj.

S & F stepped type modular plate electronic fan regulator flush type on the existing phenolic laminated sheet / modular plate etc. as reqd complete all as specified. Make:Roma (Anchor)/Legrand/ Simens/ Havells

Taking down carefully exhaust fan/ air circulation of any make, size from its location, handed over to AGE E/M store yard without any damage.

Supply & fix high speed exhaust fan 300 mm sweep single ph, 230 volt, steel body with louvers incl all fixing arrangement complete all as specified and directed Make: Havells, model No- FHVDSREPSG12 Ventil Air DS (HS) R oror equivalent to CG/Orient / Usha/ Khaitan

S & F air ventilating fan 250 mm sweep single ph, 230 volt, PVC body with louvers incl all fixing arrangement complete all as specified and directed Make: Havells, model No- FHVVEDXOWH10 Ventil Air DX or CG, Model No: BRISK AIR NEO or equivalent to Orient / Usha/ Khaitan

Supplying, fixing and testing Tube light fittings LED 20 watts 4 feet including all accessories and fixing arrangements for fixing the light fitting (Warm white/ white colour as per requirement of site) complete all as specified and directed. Make: Luker Cat Part No : LT5M20 or equivalent to CG/ Philips Havells/ Luker

Supply and fixing and testing Tube light fittings LED 10 watts 2 feet including all accessories and fixing arrangements for fixing the light fitting complete all as specified and directed. Make: Luker Cat Part No : LT510P or equivalent to CG/Philips Havells/Luker

Taking down carefully old unserviceable water heater of cap 25 ltrs and refixing the same with painting of two coat of synthetic enamel paint all as specified and directed by Engr In Charge.

Supply and fixing Water heater Energy Efficient BEE 5 star rated storage type of 25 liters capacity with rated 2 KW, vertical electric complete including flexible pipe for hot and cold water, dead weight pressure relese valve, Anchor fastner - 4Nos of suitable size all as directerd by Engineer-in-charge. Make: Havells ( Model No GHWAFATWB025 ) or equivalent make to CG/Usha

Supply and fixing of Decorative ultra slim linear LED lighting fixture of 18 Watt recess mounted 220V , 50Hz with Aluminium housing ,environmental friendly energy efficient fitting recess mounted round/square in shape (Warm white/ white colour as per requirement of site complete) of light as required at site) complete all as specified and directed. Make - Philips Cat Part No : Dura Slim or equivalent make in CG//Havels. NOTE: The rate quoted deemed to include for any alterations required to existing/new false ceiling as per site condition for fixing light fitting.

Supply and fixing of Cob/Spot LED lighting fixture of 7 Watt recess mounted 220V, 50Hz with Aluminium housing , energy efficient fitting recess mounted round in shape (Warm white/ white colour as per requirement of site complete) of light complete all as specified and directed. Make - Luker Cat Part No : LCOB07N or equivalent make in CG/Havells. NOTE: The rate quoted deemed to include for any alterations required to existing/new false ceiling as per site condition for fixing light fitting.

Supplying & fixing LED bed side lamp of capacity 3 watts with lED bulb (white/yellow colour of light as required at site) complete all as specified and directed. Make : Philips Model Moden No : 48042 or euivalent to C&S/Havells/CG

S & F of wall mounting decorative fittings of capacity 9 watts including 9 watts of LED bulb white/warm as required at site including fixing arrangement of light fittings complete all as specified and as directed Make: Philips Model No : 34302 or equivalent CG /Havells /Luker

Supply and laying of rigid non metallic PVC conduit of size 25mm dia exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reduses, bell mouth tube ends and fixing accessories such as couplers lock nuts, saddles pipe hooks etc all as directed.

M & L submain wiring with 2 runs of 6.0 sqmm multistranded copper conductor cable (FRLS) PVC insulated 1100 Volts grade and one run of 6.0 sqmm PVC insulated multistranded copper conductor cable (FRLS) earth continuity conductor Including lugs of suitable size drawn in and including rigid PVC casing & caping of suitable size but not less than 25 mm width or PVC conduit of size not less than 25mm dia as required complete all as directed . Make of wire : Polycab/ Gloster/Anchor/Havells/Finolex and Make of PVC casing & caping : Modi/ Precision/ Supreme/ Finolex/ Polycab. NOTE : 2 runs of 6.0 sqmm cable and one run of 6.0 sqmm earth wire alongwith PVC casing & caping PVC conduit will be masured as one unit.

M & L submain wiring with 2 runs of 4.0 sqmm multistranded copper conductor cable (FRLS) PVC insulated 1100 Volts grade and one run of 4.0 sqmm PVC insulated multistranded copper conductor cable (FRLS) earth continuity conductor Including lugs of suitable size drawn in and including rigid PVC casing & caping of suitable size but not less than 25 mm width or PVC conduit of size not less than 25mm dia as required complete all as directed . Make of wire : Polycab/ Gloster/Anchor/Havells/Finolex and Make of PVC casing & caping : Modi/ Precision/ Supreme/ Finolex/ Polycab. NOTE : 2 runs of 4.0 sqmm cable and one run of 4.0 sqmm earth wire alongwith PVC casing & caping PVC conduit will be masured as one unit.

S & F DB VTPN sheet metal enclosure double door IP 43 protection, door earth suitable for incoming upto MCCB 100 Amps/125 Amps & outgoing MCB TP / SP. Triple pole and neutral 415 V 4 Way with 200 Amp rated standard bus bar of suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete including taking down old unsv DB of any type /rating and making good to the distrubed surface /walls all as specified and directed. Note: All the circuits should be connected to MCBs along with copper reducer terminals duly crimpled. Make : Indo Asian/Havells/L&T/Legrad

S&F MCCB, 4 pole, 100 Amps, 50Hz, 25KA rupturing capacity, 415 Volts adjustable type with thermal and magnetic release complete all as specified and as directed. MAKE: C&S/Indo Asian/Havells/L&T

S&F single pole and neutral sheet steel powder coated distribution board IP-43 protection with door earthing for MCBs fitted with 200 Amps rated bus bar, Neutral link, earth bar and din rail suitable for use on 240V, 50Hz supply double door SP&N DB system 8 ways, including taking down old unserviceable DB of any type / rating and making good to the disturbed surafce / walls complete all as specified and directed. Note: All the circuits should be connected to MCBs along with copper reducer terminals duly crimpled. Make : C&S / Indo Asian / Havells / L&T / Legrand

S&F MCB, SPN, "C" series, 40 Amps, having current rating 10 KA complete all as specified and as directed. MAKE: C&S/ Indo Asian/Havells/L&T

S&F MCB, single pole 6 to 32 Amps, "C" series, having current rating 10 KA complete all as specified and as directed. MAKE: C&S/ Indo Asian/Havells/L&T

M&L for cutting channels, grooves or rebates not exceeding 15cm girth in PCC block masonry/RCC, trimming surface and making good surfaces to match with existing surfaces complete all as specified and directed.

M&L for earthing complete with GI earth plate electrode of size 600mmx600mmx6.15mm thick buried directly in ground (earth pit not less than 2.25m deep below the normal ground level) with top edge of the earth plate not less than 1.5m below normal ground level connected to 4mm dia GI earth wire as earth lead connected by means of bolts, nuts, washers and check nuts made out of galvanised iron or steel all as shown on electrical plate No. 3 of SSR Part-I connected to common earth dolly including testing on completion complete all as specified and directed. NOTES: (1) The unit rate shall also include for earth work in any type of soil, PCC (1:3:6) type C1 chamber, pre-cast RCC (1:2:4) type B-1 using 20mm graded stone aggregate cover 50mm thick reinforced with TMT bars 8mm dia @ 100mm c/c both ways, funnel with watering pipe 20mm dia GI medium grade, GI protection pipe light grade 40mm dia and wire mesh complete in addition to item No. 1(a) to (e) of preamble (notes) under sub-heading earthing, specified on Sl. Page Nos. 422 & 423 of SSR Part-II. (2) Earthing lead and GI protection pipe beyond 7.5m will be measured and paid separately.

M/s Prem Enterprise

V KARTHICK

NAWAZ CONSTRUCTIONS

M/s Ramesh Lal

P Babu

M/S AMK CONSTRUCTIONS

M/s Kamal Electrical

Reliance Sales Agency