REPAIR/MAINT/REPLACEMENT OF STREET LIGHT, HIGH MAST LIGHT, FLOOD LIGHT, GATE LIGHT, GARDEN LIGHT AND CONNECTED WORKS AT CHCC, BH, SHO, SOI, PDA CMDC, ECHS AND COLLEGE OF NURSING AT AGE E/M (HOSP) UNDER GE E/M LUCKNOW

Amount

Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth for laying of cables, pipes etc. and getting out including trimming the sides and forming bottom surfaces to required levels in soft / loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, and well ramming in layer not exceeding 25 cm thick in soft/loose soil complete all as specified and directed.

Removing excavated material (soils) not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified.

Material and labour for river sand, washed and screened dry for cushioning to under ground cable in trenches below and around under ground cable including spreading and levelling complete as specified and directed. Note :- Punned thickness shall only be considered for payment

M&L for laying well burnt old size bricks, sub class "B" bricks, straight or curved on plan, laid flat with width equal to length of brick , laid dry over electric cable for protection all as specified.

Deployment of tools & manpower for Boring of hole under road / pavement / hard standing or any other situation by manual means suitable for passing of 40 to 80 mm bore pipe and making good both ends all specified and directed

M&L for 40 mm bore mild steel galvanised tubing, light grade with all fittings and fixed to walls or laid on floors / fixed to poles / or passing under road crossing, for protection of UG cable complete all as specified and directed by Engr-in-Charge.

M&L for 50 mm bore mild steel galvanised tubing, light grade with all fittings and fixed to walls or laid on floors / fixed to poles / or passing under road crossing, for protection of UG cable complete all as specified and directed by Engr-in-Charge.

Supply, laying jointing and testing LT UG cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, IS 7098 marked, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 Sqmm 2.0 core, laid in trench / laid under floor or fixed naked with wall / on wall / in ducts / in GI pipes etc. with and including MS Clamps, nuts, bolts, washers and taking down old cable complete all as specified and directed. Note- Excavation, earth works, and sand cushioning, protection bricks / tiles / blocks and pipe shall be measured and paid seprately.

All as per item No 09 above but LT UG cable of size 10 Sqmm 4 core.

All as per item No 09 above but LT UG cable of size 16 Sqmm 2 core.

All as per item No 09 above but LT UG cable of size 16 Sqmm 4 core.

All as per item No 09 above but LT UG cable of size 25 Sqmm 4 core.

Supply and fix in repair flat twin core, 2.5 sqmm nominal cross sectional area multistranded aluminium conductor cable, over all PVC sheathed, 1100 Volts grade heavy duty cable PVC insulated and PVC sheathed complete all as specified.

Supply and installed in replacement steel tubular swaged pole type 410 SP - 31 (9 mtr long) complete with MS base plate of size 300 x 300 x 6 mm thick at bottom, welded at the centre with through hole of 14 mm dia at a height of 300 mm above the coping finial cap and painted with two coats of aluminium paint over a coat of red oxide primer, making of strip of 300 mm width (balck and yellow in alternate band) upto 1500 mm height with one synthetic enamel paint, writing pole No with stencil with white colour in black background with synthetic enamel paint including excavation upto required depth and PCC type C-2 1:3:6 (using 40mm graded) at bottom and PCC type B-1 1:2:4 (20mm graded) for mass filling and pole coping (60x60x30cm) and rendering of coping with 5 mm thick in 1:3 cement mortar complete all as specified and directed.

Dismantling and removing existing unsv street light / flood light MH / HPSV fittings of any type and any capacity from street light poles any hieght and high mast light pole after disconnecteing of electrical connection complete all as specified and directed.

Supply and fix 35 W LED Street light fitting having epoxy powder coated pressure die cast aluminium housing front cover with polycarbonate lens with silicon gasket, with elegantly designed heat sink for efficient thermal management, sturdiness & excellent corrosion resistant, lens for better distribution and toughened glass fixed to housing with screws, street light should have IP 66 protection and impact resistance of IK 07, system lumen efficiency not less than 110 lumen per watt, power factor >0.95, THD<10% at full load CRI> 70%, street light should have built in potted driver, THD, open circuit protection, over voltage protection, surge voltage protection, 10 KV surge protection divice, and provided with company LOGO ingraved on housing of the Street light all as specified and directed by Engr -in-Charge. Note :-The contractor should take approval of techincal specification of luminaries and driver from department before procurement .

All as per item No 17 above but 60 watt LED street light fitting

All as per item No 17 above but 70 watt LED street light fitting

All as per item No 17 above but 90 watt LED street light fitting

Supply and fix 70 W LED Flood light fitting having epoxy powder coated pressure die cast aluminium housing front cover with polycarbonate lens with silicon gasket, with elegantly designed heat sink for efficient thermal management, sturdiness & excellent corrosion resistant, lens for better distribution and toughened glass fixed to housing with screws, street light should have IP 66 protection and impact resistance of IK 07, system lumen efficiency not less than 110 lumen per watt, power factor >0.95, THD<10% at full load CRI> 70%, street light should have built in potted driver, THD, open circuit protection, over voltage protection, surge voltage protection, 10 KV surge protection divice, and provided with company LOGO ingraved on housing of the Street light all as specified and directed by Engr -in-Charge. Note :-The contractor should take approval of techincal specification of luminaries and driver from department before procurement .

All as per item No 21 above but 100 watt LED Flood light fitting

All as per item No 21 above but 120 watt LED Flood light fitting

All as per item No 21 above but 170 watt LED Flood light fitting

All as per item No 21 above but 210 watt LED Flood light fitting

Supply and fix 20 watt LED post top lantern 230 volts AC outdoor type with decorative post top for 360 degree indiret light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete.

Supply and fix 40 watt LED post top lantern 230 volts AC outdoor type with decorative post top for 360 degree indiret light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete.

M&L for fabrication and fixing canopy headed junction box of size 30 x 25 x 15 cm, suitable for LT Pole, made out 3.15 mm CRCA sheet with cover, 04 Nos aluminium bus bar of size 25 x 3 mm for phase and neutral 01 No 06 Amps MCB SP mounting channel for control street light cable gland aluminium lug MS FIixing clamp -02 nos with nut bolt washer painting with two coat of synthectic enamel paint over a coat of red oxide primer on external and internal surface complete all as specified and directed

S&F in replacement GI bracket for street light fittings fabricated with GI tubing 40mm dia 'light grade' 1.5m long and bending to angle of 120 degree including mild steel clamp of suitable size with two coat aluminium paint suitable for fixing on PCC / steel poles complete all as specified and directed.

NEXT POWER ENTERPRISES (BID ID -3151085)

M/S BHAGIRATHI ENTERPRISES (BID ID -3153119)

MTR GROUP & COMPANY (BID ID -3152641)

M I & CO. (BID ID -3152481)

abhinav enterprises (BID ID -3151858)

AVARAH ENGINEERS (BID ID -3148756)

Joy Dey Enterprises (BID ID -3152990)

GYAN ENTERPRISES (BID ID -3152637)