ADDN/ ALTN AND SPECIAL REPAIRS TO BLDG NO T-72 (OFFRS MD ACCN) AT JAL VIHAR UNDER GE HADDO, PORT BLAIR

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

M&L for light shade Vitrified Ceramic tiles 8 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15mm thick screed bed of cement mortar 1:4 complete all as specified and directed

M&L for light shade vitrified ceramic tiles minimum 8mm thick (square/ rectangular) polished area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm in vertical surfaces such as skirting, dados and riser etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick screed bed of cement mortar 1:3 complete all as specified and directed

M&L for Non Skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tiles exc 0.06 Sqm but n. exc 0.11 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed of cement mortar 1:4 complete all as specified and directed

M&L for Non Skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed of cement mortar 1:4 complete all as specified and directed

M&L for coloured Glazed ceramic tiles in vertical surfaces 350x250x7mm/300x450x7mm thick set and jointed in neat cement slurry and pointed with white or coloured cement over and including 10mm thick rendering or bedding layer of cement mortar 1:3 complete all as specified and directed

Demolition stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed

M&L for 16-18mm thick granite of approved quality machine cut polished, bedded and jonted with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone as in cooking platform, counter of WHB and like over and including 15mm thick screed bed in CM 1:4 including grinding/chamfering and polishing the edges complete all as specified and as directed by Engr-in-Charge

M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations complete all as specified and as directed by Engr-in-Charge

Demolition of precast cement concrete block walling built in CM or cement lime Mortar complete all as specified and as directed

M&L providing precast cement concrete solid building blocks PCC 1:3:6 type C1 (using 20 mm graded stone aggregate) or slabs 10cm thick (with plain or interlocking joints as directed) setting in cement mortar 1:4 in walls complete all as specified

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) and removing the rubbish from the site.

M&L for Nominal mix RCC 1:1.5:3 (using 20mm graded stone aggregate) type A1 in Slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the likecomplete all as specified and directed

M&L formwork for rough finished flat surface to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed

M&L formwork rough finished surface of concrete to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n. exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work n. exc 10 cm wide complete all as specified and directed

M&L for Nominal Mix (using 20mm graded crushed stone aggregate) in beams, cantilevers, bressummers, lintels over 1.5m span all as specified and directed

M&L formwork for rough finished flat surface to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup-ports, overhangs, etc also splays between floors and beams, etc complete all as specified and directed

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

Dismantling plain or corrugated steel sheeting, any gauge, thickness including nainital or similar pattern in roof coverings complete all as specified and directed

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridge etc fixed with self tapping screws as specified

M&L plain aluminium flat section not less than 0.68 Kg per RM as in wind tie fixed with aluminium self tapping screws complete all as specifed

Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and directed

S&F mild steel roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framming (Beam,Tee, Angle, Channels or flat sections) including distance pieces, cleats etc conforming to Fe 410-W (Gde-E-250) quality-A complete all as specified and directed

M&L for applying two coat of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surfaces of any description over 10cm width or girth not otherwise described complete all as specified and directed

M&L for applying one coat of synthetic enamel paint including preparation of old steel surfaces of any description over 10cm width or girth not otherwise described complete all as specified and directed

M&L for 20mm thick plaster on RCC roof slab in CM 1:4 including water proofing compound @ 3% by weight of cement complete all as specified (Note : WPC shall be measured and paid seperately)

Supply only liquid water proofing compound

M&L for applying a coat of cold bituminous primer over cleaned surface @ 0.30 Kg/Sqm and applying one coat of hot blown bitumen 85/25 grade @ 1.2 Kg/Sqm over primer followed by APP modified polymeric membrane 3mm thick, minimum weight not less than 3 Kg/Sqm, reinforced with polyester non-woven fabric weight not less than 150 Gm/Sqm laid as per the manufacturer's instruction with side over lap of 100mm and end over lap of 150mm, tucked into the chases on vertical surfaces and painting over APP membrane sheet with aluminium paint @ 0.10 Kg/Sqm complete all as specified and directed

Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed

S&F for anodized aluminum snap grid frame work for false ceiling incl hangers 6mm dia, GI (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60 mm long and expansion hold fasteners 12.5mm dia, 40mm long complete all as specified and as directed

M&L for 4mm thick non asbestos fiber cement building design board of size 605x605mm fixed or laid to aluminum grid work with screws and including preparation of surface with two coat of oil bound distemper over a coat of chalk whiting primer complete all as specified and as directed

Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed

M&L for 10mm thick plaster in CM 1:6 on fair face of concrete surface or brick walls finished even and smooth without using extra cement complete all as specified

M&L for preparation of newly plastered surface of wall and applying two coats of oil bound distemper over a coat of average 1mm thick wall care putty to make the surface smooth complete all as specified and directed

M&L for complete removal of existing treatment of wall surfaces and applying two coats of oil bound distemper over a coat of one coat of primer over a coat of average 1mm thick wall care putty to make the surface smooth after complete removal of existing treatment complete all as specified and directed

Cutting out existing cracks in concrete surfaces/masonry wall/slab forming grooves of 25mmx40mm size, cleaning the groove thoroughly with blower, applying primer coat of the mix of IPH CC or Hydroseal siliconate epoxy resin and hardner in equal proportion with spray gun suitable brush to form a film on the surface of groove, filling the groove with putty made by mixing IPH CC in equal proportion of make Harjas coating and polymers or hydroseal siliconate epoxy resin hardner and admixture in the proportion of 1:1:2 and finally applying the sealing coat of the same mix and in the manner primer coat is applied with following minimum coverage per running meter of groove :- Material : Priming coat putty filling seal coat, Resin 60gms 100gms 40gms, Hardner 60gms 100gms 40gms, Admixture 400gms

M&L for 15mm thick plaster in CM 1:4 on fair face of brick walls or concrete surface including mixing of water proofing compound, finished the surface even and smooth without using extra cement complete all as specified. (Note: Water proofing compound shall be measured and paid separately)

M&L for preparing newly plastered wall surface and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm complete all as specified and directed

M&L for complete removal of existing treatment on plastered wall surface and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm complete all as specified and directed

M&L for 10mm thick plaster in CM 1:3 on concrete ceiling surfaces finished even and smooth without using extra cement complete all as specified

M&L for preparation of newly plastered ceiling surface and applying two coats of oil bound distemper of approved tint over a coat of primer and applying average 1mm thick wall care putty complete all as specified and directed

M&L for complete removing of existing treatment and applying two coats of oil bound distemper of approved tint over a coat of average 1mm thick wall care putty on ceiling after complete removal of existing treatment complete all as specified and directed

Taking down aluminium chowkhats or frames area n. exc 1.50 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed

Taking down Chowkats exc 1.5 Sqm but n. exc 4 Sqm each with shutters (Without taking off shutters from the frame) complete all as specified and directed

M&L for Powder coated (minimum thickness of powder coating 50micron) aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

Supply and fixed in reair stainless steel IMAX hinges for aluminium window shutters.

Supply only aluminium alloy wire cloth 0.45 mm nominal dia of wire and average with of aperture 1.40 m and fixed with aluminium wire staples all as specified and directed.

Hacking out old broken glass(any thickness, size, quality or description) from wooden frames /steel frame/aluminium frame or stone, concrete or brick surrounds , glazed with putty or fixed with beads all as specified and directed .

S & F for 4 mm thick sheet glass ordinary quality any size and in any type of frame and glazing with oil putty ( or beading ) in square n.exc 0.5 Sqm in each panes complete all as specified and directed.

S & F for 4 mm thick sheet figured glass ordinary quality any size and in any type of frame and glazing with oil putty ( or beading ) in square n.exc 0.5 Sqm in each panes complete all as specified and directed.

S&F for 2nd class hard wood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed

S&F mild steel bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required hooks (stay), heavy, for large gates, hook and pintle hinges, large hasps and staples, chains, hand made sliding bolts, clamps, hold fasts, wall ties, hooks for hanging, fans, plain angle cleats for securing purlins to wood trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165

M&L for PCC 1:3:6 type C1 (using 20mm graded aggregate stone aggregate) as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in item 04028, water troughs and the like including weathering, holdfast, slightly rounded or chamfered angles and throating complete all as specified and as directed

S&F 30mm thick flush shutter solid core construction with block board core and ply wood face panels, commercial type both sides complete all as specified

S&F 30mm thick 2nd class hard wood factory made glazed and skelton shutter, open rebated and prepared to receive glass, gauge etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified

M&L for applying two coats of synthetic enamel paint to new undecorated wooden surfaces over a coat of pink primer including preparation, over 10cm width or girth complete all as specified

M&L for preparation of old painted surfaces of wood and wood based surfaces of any description, not otherwise described and applying one coat of synthetic enamel paints over 10cm width or girth complete all as specified and as directed

S&F factory made single extruded WPC (wood polymer composite) soild door/window/ceosetory windows and other frames/ chowkhat of size 45x70mm comprising of virgin PVC polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibres (wood powder/rice husk/wheat husk) and non tixic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750Kg/Cum, screw withdrawl strength of 2200N (face) and 1100N (edge), minimum compressive strength of 58 N/Sqmm, modules of elasticity 900 N/Sqmm and resistance to spread of flame of class 'A' category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engr-in-Charge. (MS hold fast/lugs or SS dash fasteners shall be paid for separately) Note : for WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppyling & fixing in the frame at site as per specification & drawing.

S&F 100mm stainless steel butt hinges complete all as specified

S&F 200mm stainless steel tower bolts complete all as specified

S&F 150mm stainless steel tower bolts complete all as specified

S&F 150mm stainless steel handles complete all as specified

S&F 300mm long stainless steel sliding door bolt with hasp and staple and fixing bolts complete all as specified

M&L for 100mm mortice lock, 4 lever brass body, vertical type complete all as specified

S&F door closer hydraulically regulated aluminium (die cast) body, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg complete all as specified

S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor 140mm overall length of cover plate

S&F mild steel chromium plated curtain rods including side globin and end brackets including 10 Nos rings per running meter complete all as specified

M&L for 18mm thick HDF boarding (fire & water proof) as in cup boards exterior grade with one side white lamination and other side coloured prelaminated, size of the cabinet as per requirement of the site complete all as specified and as directed by Engr-in-Charge. Make : bajaj/ Axis/Greenply/ Amnchidply / or equivalent (Note : (i) Cutting edges of cupboard shutter/shelves to be finished with adhesive edge binding tape all as directed)

S&F mild steel chromium plated auto closing hinges 35mm of 0 crank( KH-001) or 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters complete all as specified.

S&F stainless steel non megnetic bow handle "D" type 150mm long complete all as specified.

S&F Stainless Steel non megnetic 304 grade wire Basket of pull out type like plate/cup & saucer /bottle/ multi purpose/2-3 shelf baskets etc for kitchen cabinates etc of required size complete all as specified.

S&F telescopic ball bearing runners minimum length 400mm (KA 5632) full extension load capacity 45 Kg complete all as specified.

S&F double layer rotational moulded PVC water storage tank cylinderical, vertical with closed top hoisted and fixed in position tank capacity 1000 Ltr with and including PTMT float valve 20mm dia and making connection for inlet and outlet complete all as specified and directed

Taking up or down 15mm dia steel tubing and connections including cleaning for re-fixing or removal from site complete all as specified and directed

Taking up or down 20mm dia steel tubing and connections including cleaning for re-fixing or removal from site complete all as specified and directed

S&F 20mm outer dia CPVC pipes SDR 13.5 and plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including suitable reducer for 15mm dia taps fitting as required complete all as specified

S&F 25mm outer dia CPVC pipes SDR 13.5 and plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including suitable reducer for 15mm dia taps fitting as required complete all as specified

Cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10 cm girth

S&F 20mm Stop valve of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/ 20mm?92gms)Complete all as specified

S&F 25mmStop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories complete all as specified and directed

S&F PVC (SWR) pipe 110mm bore, single socketed, in any length including bends, socket etc with rubber ring joints and jointed with approved adhesive and fixed to wall complete all as specified and directed

S&F PVC (SWR) pipe 110mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive laid in trenches or in floors complete all as specified and directed

S&F PVC (SWR) 110mm dia bend of any radius and jointed with approved adhesive complete all as specified and directed

S&F PVC (SWR) 110mm dia junction single (single T) equal or unequal reducer 'T' 110mm to 75mm dia and jointed with approved adhesive complete all as specified and directed

S&F PVC (SWR) vent cowl 110mm dia jointed with approved adhesive complete all as specified and directed

S&F PVC (SWR) pipe 75mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive fixed to walls complete all as specified and directed

S&F PVC (SWR) pipe 75mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive laid in trenches or in floors complete all as specified and directed

S&F PVC (SWR) bend 75mm dia, any radius as required and jointed with approved adhesive complete all as specified and directed

S&F 75mm outlet dia PVC (SWR) multi floor trap with grating including jointing with solvent cement to waste pipe complete all as directed

S&F flush pipe of polyethylene of low or high density or PVC 32 mm dia flexible pipe suitable for WHB/sink/urinal etc complete all as specified

S&F in repair PVC connection 15mm bore dia 450mm long with 2 Nos PTMT nuts with washer complete all as specified

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes coupling including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mmx460mm bowl size 410mmx330mmx160mm complete all as specified

S&F in repair PVC Mirror cabinet of size 330x430mm fixed with screw on wall complete all as specified. Make : PRAYAG Model No.551

S&F in repair CP cast copper alloy WHB Pillar cock long neck with aerator fancy type 15mm bore complete all as specified. Make : Jaguar Cat Part No - CON-021KN or equivalent

S&F in repair CP brass hot and cold 15mm dia wall mixture 3-in-1 system with provision for both hand shower and overhead shower complete with 115 long bend pipe, connecting leg and wall flange complete all as specified. Make : Jaguar Cat Part No - Con-281KN or equivalent

S&F in repair CP overhead shower rose 105mm dia round with revolving joints (with body rotation) and 115mm long shower arm with rabit cleaning system and all fittings complete all as specified. Make : Jaguar Cat Part No - OHS-1709 & SHA-49483 or equivalent

S&F Hand Shower 100mm Round Shape Single Flow (ABS Body Chrome Plated with Gray Face Plate) with Rubit Cleaning System with easy flex Tube in Chrome Finish 1.5m Long with Nuts, Premium Wall Bracket for Hand Shower, 35mm dia. & 100mm Long Round Shape (Jaquar Cat Part No. HSH-1937, SHA-571 & SHA-555 or Equivalent)

S&F in repair CP brass 15mm hand shower (health faucet) (ABS body) with 1.5m long easy flexible tube in chrome finish and wall hook complete all as specified. Make : Jaguar Cat Part No - ALD-587 or equivalent

S&F toilet paper holder complete all as specified. Make : Jaguar Cat Part No - ACN-1151N or equivalent

S&F in repair single towel rail 600mm long complete all as specified. Make : Jaguar Cat Part No - AQN-7711 or equivalent in Marc/Plumber

S&F soap dish complete all as specified. Make : Jaguar Cat Part No - AQN-7731 or equivalent

S&F in repair Sink Cock with Regular Swinging Spout (Wall Mounted Model) with Wall Flange complete all as specified. Make : Jaguar Cat Part No - QQP-7347PM or equivalent

S& F 15mm Bib taps chromium plated Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified

S&F in repair CP bib cock 15mm dia with crutch handle as approved fancy type two way complete all as specified. Make : Jaguar Cat Part No - Con-041KN or equivalent

S&F in repair CP angle cock 15mm dia fancy type cast copper alloy complete all as specified. Make : Jaguar Cat Part No - Con-053KN or equivalent

S&F corner glass shelf with bracket complete all as specified. Make : Jaguar Cat Part No - ACN-1173 or equivalent

S&F in repair vitreous china wash down water closed pan (Pedestal pattern) white, including connection to drain (or out going pipe) and to flush pipe, antisypthonic (excluding flushing cistern and flush pipe) complete all as specified

S&F in repair plastic water closet seat cover, white, closed pattern with flat bottom including mild steel chromium plated or aluminised hinging device complete all as specified

S&F in repair PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action push type with inlet ball valve and float including flush pipe long 32mm dia, ball valve, handle, bracket etc complete all as specified and directed

S&F in repair vitreous china counter wash hand basin oval shape of size 550x400mm including brackets, 32 mm CP waste coupling, chain and plug,32mm waste pipe all necessary inlet and out let connections complete all as specified

M&L for applying a bonding slurry coat on the wall and ceiling surface up to depth of 20 mm using Nito Bond AR manufactured by M/s Fosroc Chemicals India (P) Ltd / equivalent in Dr. Fixt or Harjas Coating & Polymers (Coverag of 4 to 5Sqm / Ltrs) all as per manufacturer's instructions.

M&L for plastering the external wall/ ceiling surfaces 20mm thick (1:3) using Nito Bond SBR of Fosroc @ 7 Ltr per bag of cement or equivalent make of Dr.Fixit of Pidilite Industries or @ 5% by weight of cement of Harjas Coatings and Polymers.Make : Nito Bond SBR and Nito Bond AR of FOSROC or equivalent make of Dr.Fixit of Pidilite Industries or of Harjas Coatings and Polymers.

Taking down copper/aluminium point wiring(light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials and making good disturbed surfaces of walls, floors, etc.

Taking down fuse Unit/DBs 415 Volt/230 Volt complete all as specified and directed

Taking down old aluminium sub main wiring of any size complete all as specified and directed

Taking down existing light fittngs any type and any capacity complete all as specified and directed.

M & L point wiring complete with 1100 volts grade, 1.5 sq.mm (nominal area), single core, FRLS PVC insulated ,unsheathed, multi stranded copper conductor cable drawn through and including medium grade, rigid , non-metallic PVC concealed conduit of size not less than 20mm dia, with all necessary fittings, concealed in walls /roof/ floor duly earthed with one run of single core cable of same size but green in colour as continuous earthing wire and connecting to common earth duly including suitable size of factory made fabricated MS sheet modular terminal box, flush mounting in the wall for mounting switches/switch socket combinations/ fan regulators etc., covered with suitable size of modular cover plates complete in making good the existing surface with existing colour coding as required at site complete all as specified for the following :- Make : Polycab/Havells /Finolex/ Gloster/Anchor

All as per item No 120.00 above but for One light/fan point controlled by one modular switch 5 Amps one way.

All as per item No 120.00 above but for one modular 3 pin 5 Amp socket out let on independent board.

All as per item No 120.00 above but for one modular 3 pin 5 Amps switch socket on same Board

All as per Srl item No 120.00 above but, One light point controlled by two 2-way switches.

All as per item No 120.00 above but for one bell point controlled by one modular bell push switch 5 Amps one way.

All as per item No.120.00 above but point wiring with 4.0 sqmm PVC FRLS insulated multistranded copper conductor suitable for one 3 pin 15 Amps socket out let and Geyser and one run of 4.0 sqmm cable for earth in green colour on independent board.

S & F modular switch 6 Amp one way 230 V AC complete all as specified and directed. Make : ROMA (Anchor)/Havells (Crabtree)/Legrand

S & F modular socket outlet 6 Amp intel multi socket for all pins 230 V AC complete all as specified and directed Make : Roma(Anchor)/Havells(Crabtree)/ Legrand

S & F modular socket outlet 16 Amp socket heavy duty 230 V AC Make : ROMA(Anchor)/Havells (Crabtree)/Legrand

S & F modular switch 16/20 Amp one way 230 V AC complete all as specified and directed Make : ROMA(Anchor)/Havells (Crabtree)/Legrand

S & F modular Switch, flush type, single pole two way 6 amps all as directed. Make: Anchor/Cona/Legrand

S & F modular bell push 5Amps flush type 230v, 50Hz AC complete all as specified and directed. Make : ROMA(Anchor)/Havells (Crabtree)/Legrand

S/F Ceiling rose PVC polycarbonate , isolated body 3 terminals 230 V complete.

S&F , Electric Bell, Ding dong type working on 230 volts AC supply complete all as directed. Make: Anchor/Kinjal/Standard

S & F stepped type modular electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd complete all as specified. Make:Roma (Anchor)/ Legrand/ Simens /Havells

Supply & fix AC starter switch of capacity 25 Amps working on 240 volts ACsupply , with 15 Amps plug top and 15 Amps Sockets suitble for air conditioner Make : Crabtree Model No : ACTO252504

Taking down carefully ceiling fan of any make, size from its location, handed over to AGE E/M store yard without any damage

S & F BLDC 5 star rated ceiling fan metallic body ISI marked 1200 mm sweep, 220V Ac, 50 Hz complete with all accessories. Make: CG Model No : ENERGION Riviera with out remote 32 watt or equvalent make of Havells/Orient, Usha /Bajaj.

Supply & fixing Wall mounting fan 400 mm sweep incl all fixing arrangement complete all as specified and directed Make: Havells Model No : 400 mm FHWMWHSWHB16 (Marvel Wind HS White Blue) or equivalent to Eva/ CG/ Usha/ Orient

Taking down carefully exhaust fan of any make, size from its location, handed over to AGE E/M store yard without any damage.

S & F high speed air ventilating fan 300 mm sweep single ph, 230 volt, steel body with louvers incl all fixing arrangement complete all as specified and directed Make: Havells, model No- FHVDSREPSG12 Ventil Air DS (HS) R or CG, Model No: 300 mm TRANSAIR or equivalent to Orient / Usha/ Khaitan

S & F air ventilating fan 250 mm sweep single ph, 230 volt, PVC body with louvers incl all fixing arrangement complete all as specified and directed Make: Havells, model No- FHVVEDXOWH10 Ventil Air DX or CG, Model No: BRISK AIR NEO or equivalent to Orient / Usha/ Khaitan

Taking down carefully Geyser of any cap, any make, size from the existing location, and refixing the same with out any damage after completion of Civ work.

Supplying, fixing and testing Tube light fittings LED 20 watts 4 feet including all accessories and fixing arrangements for fixing the light fitting complete all as specified and directed. Make: Luker Cat Part No : LT5M20 or equivalent to CG/ Philips Havells/ Luker

Supply and fixing and testing Tube light fittings LED 10 watts 2 feet including all accessories and fixing arrangements for fixing the light fitting complete all as specified and directed. Make: Luker Cat Part No : LT510P or equivalent to CG/Philips Havells/Luker

S & F Decorative, wall mounting, brushed nickel finish fixture with acrylic diffuser suitable with 9 W LED lamp B22 base. Make -Havells model No LHFOAJE1TN1I060 or equivalent to Philips, LUKER.

Taking down old corroded GI bracket of 25 mm dia and supply and fixing new GI brackets of GI pipe light grade of size 25 mm dia including nuts, bolts and washers for building secufity light all as specified and directed

S& F 30 watts LED building security light fittings luminaire comprise ,pressure die cast aluminium housing powder coated graphite grey and toughened glass of IP 65 with including necessary fixing arrangements as per site requirements all as specified and directed by Engr In charge. Make : Luker Cart Part No: LSTE-30 or equivalent to Philips /Havells

Taking down carefully existing electronic energy meter of any capacity and any size and refixing the same location after completion of B/R work .

Supply & fix of FRP meter box of size (inside) 250 x 250 x 160 mm including taking down the old/unserviceable meter boxes all as specified and directed. Make : SINTEX Cat No. GSMB-2525 or equivalent to Hensel

S & F Sub main wiring with PVC insulated FRLS cable 2 single core 4 sq mm 1100 V grade with stranded copper conductor cable using proper colour coding Phase Red /Yellow /Blue, Neutral- black and earth- green in and incl rigid PVC concealed conduit (ISI marked) incl all specials/ accessories etc and provision of PVC insulated FRLS copper conductor single core 4.0 sq mm for earth continuity all as directed. Note : 3 length of cable and one length PVC Conduit shall be measured and paid for one length. Make:Gloster /Havells /Anchor /Polycab /Finolex

S & F Sub main wiring with PVC insulated FRLS cable 2 single core 6 sq mm 1100 V grade with stranded copper conductor cable using proper colour coding Phase Red/Yellow/Blue, Neutral- black and earth- green in and incl rigid PVC concealed conduit (ISI marked) incl all specials/accessories etc and provision of PVC insulated FRLS copper conductor single core 6.0 sq mm for earth continuity all as directed. Note : 3 length of cable and one length PVC Conduit shall be measured and paid for one length Make:Gloster /Havells /Anchor /Polycab /Finolex

S & F Sub main wiring with PVC insulated FRLS cable 2 single core 10 sq mm 1100 V grade with stranded copper conductor cable using proper colour coding Phase Red/Yellow/Blue, Neutral- black and earth- green in and incl rigid PVC concealed conduit (ISI marked) incl all specials/accessories etc and provision of PVC insulated FRLS copper conductor single core 10.0 sq mm for earth continuity all as directed. Note : 3 length of cable and one length PVC Conduit shall be measured and paid for one length Make:Gloster /Havells /Anchor /Polycab /Finolex

S & F DB VTPN sheet metal enclosure double door suitable for incoming upto MCCB 100 Amps/125 Amps & outgoing MCB TP / SP (IP-43) Protection Triple pole and neutral 415 V 4 Way with 200 Amp rated standard bus bar of suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete all as specified and directed. Make : C &S/ Indo Asian /Havells/L&T

S & F SPN DB sheet metal enclosure double door suitable (IP-43) Protection 12 Way with 200 Amp rated standard bus bar of suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete. Make : C&S/ Indo Asian /Havells /L&T

S & F SPN DB sheet metal enclosure double door suitable (IP-43) Protection 8 Way with 200 Amp rated standard bus bar of suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete. Make : C&S/ Indo Asian /Havells /L&T

Supply and Fixing 4 pole MCCB 100 Amp, 50 Hz, 415 V with rupturing capacity 25 KA complete all as specified and directed Make :C&S/ Indo Asian /Havells/L&T.

Supplying & fixing MCB SPN 63Amps (`C’ series) having current rating 10 KA complete all as specified and directed Make : Indo Asian /Havells /L&T.

Supplying & fixing MCB SPN 40 Amps (`C’ series) having current rating 10 KA complete all as specified and directed Make : Indo Asian /Havells /L&T.

Supplying & fixing MCB single pole, 6 to 32 Amps (`C’ series) having current rating 10 KA complete all as specified and directed Make : Indo Asian /Havells/ L&T.

Supply, laying,testing and commissioning of LT XLPE insulated, armoured heavy duty electric aluminium conductor cable 1100 Volts grade of cross section 35 Sqmm 3.5 core (laid on floor/Roof/wall in proper saddling all as specified and directed. Make Polycab/ Gloster/ Anchor/ Havells/ Finolex.

Supply and laying/ fixing in trenches, cable ducts ,clamping on wall or any place DWC HDPE pipe of size 50 mm (OD) x 38mm (ID) along with connected accessories like couplers.bends,end caps etc. for LT cable protection all as specified and directed. Make:Rex Poly Extrusion Ltd/ Tirupati Plastomatics Pvt Ltd.

Excavation in trenches not exc 1.5 M deep and 1.5 M width and getting out in soft or loose soil for foundation of poles (or) cable laying.

Returning, filling incl spreading, levelling, watering and well ramming layers not exc 25 M for cable laying.

Removing/excavated soil to a distance not exc 50 M and depositing where directed at a level not exc 1.5 M above the starting point all as specified and directed.

M & L for cutting the road/ footpath/ hard standing etc for laying of pipe including filling / finishing top surface of filled earth with PCC 1:2:4 type B-1 of 150mm thick all as directed by Engr In Charge.

M & L Cutting channels, grooves or rebates n exc 15cm girth, and trimming surface with or without reinforcement all as specified and as directed by Engineer-in- Charge.

Earthing complete with galvanised earth plate electrode 60 cm x 60cmx 6.15 mm thick, buried directly in ground vertically (earth pit not less than 2.25 m deep below ground level) with top edge of the earth plate not less than 1.5m below ground level , connected to GI earth wire 4 MM Dia as earthling lead by means bolts and nuts check nuts and washers of galvanized iron and connected to main switch board including watering arrangement with PCC chamber , MS funnel with wire mesh,. CI cover with frame etc including necessary excavation in any type of strata , returning, filling removal of soil outside MD land ,filling of charcoal and salt complete all as shown in electrical plate No. 3 of MES Sch Part I , connected to Earthing test point all as specified and directed on testing on completion.

V M YOUSUF

NAWAZ CONSTRUCTIONS

CARTWHEEL CONSTRUCTION

Sree Tirumala Enterprises

A PALANI

JD Construction

CHANDER SEKER ENTERPRISE

V KARTHICK