Tender for Repair and Renovation work of Anganwadi Training Centre, Ganjam at Ganjam Districts, Odisha (2ND Call)

Tender for Repair and Renovation work of Anganwadi Training Centre, Ganjam at Ganjam Districts, Odisha (2nd Call).

Tender for Repair and Renovation work of Anganwadi Training Centre, Ganjam at Ganjam Districts, Odisha (2nd Call)

NIT No: PCO/BBSR/1010/233 Date-23.12.2025

TOTAL

Rupees:

Tender for Repair and Renovation work of Anganwadi Training Centre, Ganjam at Ganjam Districts, Odisha (2nd call)

NIT No: PCO/BBSR/1010/233 Date-23.12.2025

Consultancy Services

Architectural Consultancy Services

Subtotal

Tender for Repair and Renovation work of Anganwadi Training Centre, Ganjam at Ganjam Districts, Odisha (2nd Call)

NIT No: PCO/BBSR/1010/233 Date-23.12.2025

EARTH WORK

Earthwork in excavation in all types of soil for site leveling, foundation, pits, trenches and other civil works upto and including 1.8 metre depth and stacking the soil upto a lead of 100 metre and including dewatering, removing slush,shoring and strutting (as required), complete as per specification and as directed by the Engineer-In-Charge. ected by the Engineer in charge.

a. All Kind of Soil

Filling in foundation trenches and plinth, with excavated earth including laying the earth in layers not exceeding 23.5 cm thick ramming & watering with all leads & lifts including cost of all labour,T&P completed as directed bythe Engineer-In-charge.

Supplying and filling sand in foundation and over areas including watering, ramming, consolidating and dressing, labours, tools, taxes etc. all complete as per the specification and direction of Engineer-In-charge.

Diluting and injecting chemical emulsion (to be supplied free of cost at site of work) for PRE CONSTRUCTIONAL Anti-termite treatment and creating a continuous chemical barrier under and all-round the column pits, wall trenches, basement excavation, top perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surroundings of pipes and conduits etc. complete as per specifications (plinth area of the building at ground floor only shall be measured for payment).

CIVIL WORK

Providing and laying plain cement concrete 1:3:6 (1 cement : 3 sand : 6 stone agregate 40mm nominal size) as levelling course in foundation and plinth etc. including tempering, curring, shuttering etc. complete all depth and height.

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well ramed, consolidated and grouted with fine sand and finishing the top smooth including shuttering at the edges, excavation and disposing of surplus earth with a lead of 100m.

Providing, lifting, hoisting and laying Reinforced cement concrete of M-25 grade as per approved designs and drawings having a minimum compressive strength (in work test) 25 Kg. / Square cm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm. size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned ( 20mm. size chips not to exceeds 25 % ) to be mixed in concrete mixture with Portland slag cement (PSC) including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, centering and shuttering then after dismantling and removing debris from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, sundries, T & P required of the work etc. complete in all respect as directed by the Engineer-in-Charge. But excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or tor steel tying the grills and placing in proper position. at all floors and all heights.

a)Footings

b)Pedestal

c)Column Upto Plinth

d)Plinth Beam

e)Column upto first floor lvl from plinth lvl

f)Column upto second floor lvl from first floor lvl

g)Roof beam ground floor

h)Roof Slab ground floor

i)Lintel

k)Drain base

l)Drain Wall

m)Drain Cover

n)Road

Cutting,Straightening coiled or bent up M.S plain HYSD/TMT reinforcement bars welding or jointing if necessary bending,binding,tying the grills as required for R.C.C works,providing fan hooks where necessary and hoisting, lowering and placing in proper position according to approved designs and drawings including cost, conveyance,loading, unloading & taxes of M.S plain/HYSD/TMT reinforcement bars and binding wires of 18 to 20 gaugo required for the work and cost of all labour, sundries, T&P and scaffolding complete in all respect as directed by the Engineer in charge (payment will be made according to the actual weight of M.S plain/HYSD/TMT reinforcement bars consumed in the work only.

a)Footings

b)Pedestal

c)Column Upto Plinth

d)Plinth Beam

e)Column upto first floor lvl from plinth lvl

f)Column upto second floor lvl from first floor lvl

g)Roof beam ground floor

h)Roof Slab ground floor

i)Lintel

j)Drain base

k)Road

First class Fly ash Brick masonry using bricks of size 23cm. x 11 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix( 1:6) with Pozolona Portland slag cement(PPC) and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Foundation & Plinth including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-In-Charge.

In Plinth

In Ground Floor

In Ground Floor

FINISHING WORK

6 mm cement plaster on RCC surfaces at ceiling/slab soffit and other locations with cement mortar of mix 1:4 (1 cement : 4 fine sand) including necessary scaffolding, curing etc. all complete at all floors and all heights.

In ground Floor

In first Floor

12mm cement plaster on internal RCC/brick surfaces in cement plaster 1:6 (1 cement : 6 coarse sand) including necessary scaffolding, curing etc. all complete at all floors and all heights as direction of Engineer-In-charge.

In ground Floor

In first Floor

16mm cement plaster on external smooth side of RCC/brick surfaces with cement mortar of mix 1:6 (1 cement : 6 fine sand) including necessary scaffolding, curing etc. all complete at all floors and all heights as direction of Engineer-In-charge.

In ground Floor

In first Floor

Providing and laying grading conc. 40 mm (avg. thickness) cement concrete of required slope of mix 1:2:4 (1cement:2sand:4 graded stone aggregate of 10 mm nominal size) mixed with approved water proof compound as per manufacturer's specification on top of slab including cement slurry, all complete, including the cost of water proofing admixture, which should be approved by the Engineer-In-Charge prior to material procurement by the contractor.

In Terrace

Providing & applying Waterproofing for Roof Top Surface: Surface Preparation & Crack Filling & Checking the leakage &seepage with pond testing - The surface shall be prepared by chipping all loose materials/mortar with wire brush or coir brush in order to remove all loose and deleterious matter, dust etc. (as per IS 1443-1972). If any cracks found cutting the cracks by 3mm/3mm & filling the same with Geolite Gel - epoxy mineral thixotropic gel with high wettablity and impregnation with excellent bonding to concrete, wood, steel, PVC etc. Junction treatment - All horizontal/vertical corners are treated with approved kerakoll Aquastop 120 - flexible NBR waterproof tape fixing with Nanoflex - single component, polymer modified, waterproofing adhesive.Joints sealing of all inlets and outlets pipes with the help of GEOLITE GEL. Application of 2 coats of NANOFLEX over the Roof mother slab followed by aprotection screed (1:1.5:3) in pannel of size 2mtr *2mtr to drain the water towords the rain water pipe &finally filled the joints grooves(10mm*10mm) with fugabella Pu 40 complete as per manufacturing specification and direction of Engineer-in-Charge. Make :- Kerakoll

In Terrace

Providing & Applying priming coat with Cement primer of approved brand and manufacture on plaster surface as per the instruction of Engineer-In-Charge at all elevations including all material & labour complete.

In ground Floor

In first Floor

In Second Floor

Providing and applying to outside walls with two or more coats of Anti-Fungal Weather coat water proofing paint including scaffolding and cleaning the surface before application of approved colour and manufacture as per specification, instruction of Engineer-In-Charge at all elevations including all material labour complete.

In ground Floor

In first Floor

In second Floor

Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacturer, over the plastered wall surfaces to prepare the surface even and smooth as per the instruction of Engineer-In-Charge at all elevations including all material & labour complete.

In ground Floor

In first Floor

Wall painting two coats with 100% Acrylic emulsion paint (1st quality) interior grade of approved make & shade manufactured by reputed manufacturer like NEROLAC / ASIAN / BERGER / DULOX or equivalent to make an even finished surface over a coat of primer with water bond cement primer, Putty in all heights with all scaffolding and staging charges including cost, conveyance, taxes of all materials, cost of all labours, T & P, sundries etc. as required for the work complete.

In ground Floor

In first Floor

Providing and laying Vitrified floor tiles 600x600 mm (thickness to be specified by the manufacturer) 1st quality of NITCO, SOMANY, ASIAN, KAJARIA or equivalent approved make, colours & shades laid on 20 mm thick cement mortar 1:4 (1cement: 4coarse sand ) including pointing the joints with matching epoxy grout , etc. complete as per direction of Engineer-In- Charge at all floors and all heights.

In ground Floor

In first Floor

Providing and laying Vitrified Skirting tiles 600x600 mm (thickness to be specified by the manufacturer) 1st quality of approved make, colours & shades laid on 12 mm thick cement mortar 1:3 (1cement: 3coarse sand ) including pointing the joints with matching epoxy grout , etc. complete as per direction of Engineer-In- Charge at all floors and all heights.

In ground Floor

In first Floor

Providing and laying Matte Finish Vitrified floor tiles 300x300 mm (thickness to be specified by themanufacturer) 1st quality conforming to IS: 15622 of approved make, colours & shades, except white, vory,grey, fume red brown, laid on 20 mm thick cement mortar 1:4 (1cement:4coarse sand) including pointing the joints with white cement and matching pigments, etc. complete as per direction of Engineer-In-Charge at all floors and all heights.

In ground Floor

In first Floor

Providing and fixing 1st quality Ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer) minimum thickness 5mm of approved make in all colours, shades except burgundy, bottle green, black of size 250x375 in skirting and dados over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing the joints with matching epoxy grout complete as per direction of Engineer-In- charge. In all floors and all heights.

In ground Floor

In first Floor

Providing and fixing 20mm thick Granite stone flooring (sample of Granite stone should be approved by EIC) for stair case trade, riser and similar locations where ever required in horizontal/vertical surfaces of required size of approved shade, colour and texture, with moulding edge etc. laid over 20mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand) with joints treated with white cement mixed with matching pigment, epoxy touch ups including rubbing, curing, moulding and polishing to give high gloss finish and groove in staircase where required etc. complete as per direction of Engineer-in-charge. In all floors and all heights.

In ground Floor

In first Floor

Providing, fitting, fixing UPVC Window of Fenesta make or equivalant with choukhat and 5mm reflective toughened glass alongwith locking arrangements and all requisite fitting including cost, conveyance, loading, unloading and taxes of all materials, cost of all labour, T&P etc complete as per direction of Engineer-in-charge.

polymer composite (WPC) Door Frame of the size 125 x 65mm with high density rigid solid wood polymer composite of 0.7D WPC foam sheet, mitre cut at two corners and joined and The two vertical door profiles are to be reinforced to horizontal member. The door frame shall be fixed to the wall using 6nos 150mm long M.S. holdfastners through the frame by using etc. complete as per manufacturers specification and direction of Engineer-in-Charge for finished item of work.

Providing, fitting and fixing of approved make 34mm thick (laminate finished thickness of the door) factory made flush doors of the followings size finished with 1mm thk. laminate of approved colour & shade to both side fixed to the teak wood bidding, complete in all respect bidding/lipping as per drawing/design. The door will be provided with all necessary fittings & fixtures, i.e. Baan Code-LKYPDC527), 125x75x3mm (code no-7912) SS201 hinges, etc. of approved make with all materials, labour, T&P, taxes etc. as per direction of Architect/Engineer-in-Charge

Supplying , fitting & fixing of Rajshree moulded door shutter (solid core) of 30 mm thick including cost of all material, labour etc complete of approved make with all materials, labour, T&P, taxes etc. as per direction of Architect/Engineer-in-Charge

Providing and fixing M.S grill of required patterns for windows/verandahs etc. with M.S flats, square or round bars etc. including applying a coat of approved steel primer and two or more coats of synthetic enamel paint of approved make & shade, all complete as per drawing & specification. (All steel sections contractor's own supply).

Providing & Painting with synthetic enamel paint of approved brand and manufacture to give an even shade as per the instruction of Engineer-In-Charge at all floors and all heights including all material & labour complete.

Supplying, fitting and fixing of Stainless steel of 304 grade in hand ralling using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm X 32mm X 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm X 32mm X 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes, all materials, labour, T&P etc. required for the complete in all respect.

Providing Pre Painted Galvanized Iron Sheet Roofing (PPGI) 0.50 mm thick at all levels including fitting and fixing with self drilling, self tapping screws complete. (Roof trusses, purlins etc. To be measured and paid separately). Dyna Roof/Wonder Roof/JSW Steel/Spectrum or equivalent as directed by the Enigineer In Charge

SITE DEVELOPMENT

Filling playground with morum including watering ramming and compacting in layers not exceeding 600mm thick including labour sundries T&P etc complete and as per direction of engineer -in- charge. (Measurement will be taken on finished compacted section only.)

Filling playground with earth including watering ramming and compacting in layers not exceeding 200mm thick including labour sundries T&P etc complete and as per direction of engineer -in- charge.(Measurement will be taken on finished compacted section only.)

Construction of subgrade and Earthen shoulders with approved materials from borrow pit with all lift and leads transporting to site spreading,grading to request slope and compacting to meet requirement of table 300.2 Unit = 100cum

Construction of granular sub-base by providing Close graded Granular subbase Grading-III material as per table 400-1, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density complete as per Clause 401 of MoSRT&H Specifications for Road & Bridge works (4th Revision) Unit = cum Taking output = 300 cum

Surface preparation is by raking and mixing to attain a smooth finished surface and planted with rooted slips of the specified grass species. Rate to include supply of grass species, labour charges for mixing soil media in the desired proportion, planting of rooted grass slips and maintenance for a period of 3 months from the date of planting. Rate shall include supply of sand, neem cakes and organic manure and all other additives as mentioned in the specifications.

Providing and laying 80 mm thick Factory made cement concrete interlocking Paver block of M30 grade made by block making machine with strong vibratory compaction.

FURNISHING WORK

Artistic painting on boundary wall including labour and material etc. complete as per direction of Engineer-In-Charge at all floors and all heights.

Supply & fixing digitally printed acrylic sign board made of 5 mm thick acrylic board finished with required fixing arrangement such as frame complete as per direction of Engineer-In-Charge at all floors and all heights.

Providing and fixing Aluminium Composite Panels (ACP) of exterior grade for cladding near entrance of Alucobond / Alstrong / Eurobond orapproved equivalent make for external wall / column / canopy cladding including all necessary frame work and complete weather sealing as per detailed technical specifications. the system shall be fixed using GI brackets and stainless steel bolts and nuts complete with spring washers and cap nuts and all other necessary accessories. The bracket support shall be designed as per manufactures specification and shall withstand a wind pressure of 150 kg / sqm. all hardware shall corrosion resistant frame out of anodised aluminium member.

Providing and fixing of ceramic flower base 13cm X 8cm X 20cm etc. complete as per drawings, specifications and directions of the Engineer-in-Charge.

Providing, fitting and fixing of of false ceiling with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595x595 mm of approved texture, design and patterns fixed to Aluminium anodised T section No. 3215 with 2'-0" centre to centre L section No. 1705 upto 15 micron on 4 walls to be fixed by means of steel screw and PVC plug Aluminium grid 2'-0" x 2'-0" etc. complete as per direction by the Engineer-in-Charge.

Providing, fitting and fixing wooden paneling to walls and columns wherever necessary from floor lvl to ceiling ht or as per drawing/design made out of 50.8mmx25.4mmx1.34mm thick Aluminium rectangular sections placed @ 600mm c/c both ways on grid, on top of grid 12mm fire resistant and termite proof ply (conforming to IS code :5509) to be provided with 1mm thk laminate of approved shade and colour finished with melamine polish as per design/drawing or as directed by the Architect/Engineer-in- Charge. The rate includes cost of cutouts for electrical switches, light fixtures, wall bracket fans if any, all complete with materials, labour, T&P, taxes etc.

Providing & fixing Roller blind of Sun screen quality to allow diffused sunlight into the space with approve shade, texture & patten of approved makes for Mac / Marvel / Vista with necessary hardwares like pully, bearing thered and roller complete in all respect with all cost ,labour,T & P,Taxes etc as per direction of the Engineer - in - charge.

DISMANTLING WORK

Dismantling and removing cement concrete including stacking the useful materials for reuse and removing the debris within 50m lead complete in all respect with all cost ,labour,T & P,Taxes etc as per direction of the Engineer - in - charge.

Dismantling and removing R.C.C. columns beams slab staircase landing lintels including stacking the useful materials for reuse and removing the debris within 50m lead complete in all respect with all cost ,labour,T & P,Taxes etc as per direction of the Engineer - in - charge.

Dismantling brick or stone masonry in lime or cement mortar above 3m. height including stacking the useful materials for reuse and removing the debris within 50m. Lead complete in all respect with all cost ,labour,T & P,Taxes etc as per direction of the Engineer - in - charge.

Dismantling Wood Work wrought framed and fixed in frames(door and window) upto a height of 5 m above plinth level including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 100 metres Lead complete in all respect with all cost ,labour,T & P,Taxes etc as per direction of the Engineer - in - charge.

DRemoving old lime or cement plaster from walls including raking out joints 12 mm deep and removing the debris within 50m lead in all respect with all cost ,labour,T & P,Taxes etc as per direction of the Engineer - in - charge.

Dismantling and removing old tiled flooring including removing the base coarse and stacking the useful materials for reuse and removing the debris within 50m lead complete in all respect with all cost ,labour,T & P,Taxes etc as per direction of the Engineer - in - charge.

TOTAL

Tender for Repair and Renovation work of Anganwadi Training Centre, Ganjam at Ganjam Districts, Odisha (2nd Call)

NIT No: PCO/BBSR/1010/233 Date-23.12.2025

A.FURNITURE

Office Chair

Office Table

Visiotor Chair

Computer Table

Computer Chair

Steel Almirah

Glass Door Almirah

White Board with stand

Display Board

Dinning table 6 seater

Dinning Chair

Shoe rack

Steel Rack / Book Rack

B.FIXTURE

LOBBY

Providing and fixing 2500 watt inveter with 24 volt batter and stand including all material and labour etc as required .

Supplying Blue Star Fully Stainless Steel body Water Cooler Model - PC - 151503T (1 Plain & 2 Cold) Storage Capacity -150 Litres, Cooling Capacity - 150 Litres

Suplying A4 Inktank printer with scanner of EPSON make . Model Number -

Computer - OPS- i5,8 GB RAM, 1 TB HDD ,128 GB SSD, Window-10 with 22" monitor and UPS

Grand Total (A+B+C+D)

Tender for Repair and Renovation work of Anganwadi Training Centre, Ganjam at Ganjam Districts, Odisha (2nd Call)

NIT No: PCO/BBSR/1010/233 Date-23.12.2025

(SH: INTERNAL ELECTICAL WORK WITH FITTINGS,DATA,CCTV,FIRE FIGHTING.LA,AIRCONDITION SYSTEM & LANNSCAPE LIGHTING WORK.

Recess Wiring for light point/ fan point/ exhaust fan/wall fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with 1way modular switch, modular plate, suitable GI box including supplying the same and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required including the cost of labor & material T & P as required as EIC.

First Point

Non-Sch

Non-sch

Non-Sch

Supplying and fixing following way, Vertical type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required including the cost of labor & material T & P as required as EIC. (But without MCB/RCCB/Isolator)(But without MCB/RCCB/Isolator)

Supplying and fixing following rating, four pole, neutral), 415 volts, Module case circuit Breaker (MCCB), having breaking capasity of 16KA in the existing MCCB DB / Panel Board complete with connections, testing and commissioning etc. as required including the cost of labor & material T & P as required as EIC.

Supplying the following Size ISI mark Aluminum conductor, XLPE insulated cable, FRLS PVC, galvanized steel flat strip armoured and overall PVC sheathed cable conforming to IS: 7098 (Part - I) with latest amendments & complete all as required including the cost of material T & P as required as EIC.

Panels .

Non Sch

Main Panel Board = (Indoor floor mounted type)

1no 65KA FP VSD with 32A FP MCB

Incommer-1:- 01 no. 125A., 25KA FP MCCB with Ol,SC,EL protection . with 1nos 125A FP On load Change Over switch

Busbar-1:- 04 nos.200A. Al. bus bar duly sleeved.with Locking arrangement.

Outgoing:-i)

ii) 02 no. 100A. , 25KA FP MCCB,MCCB, 1 no. 63A. , 25KA FP MCCB

5-nos 32A, 10kA FP MCB & 3-nos 32A, 10kA DP MCB ,6-nos 40/ 63A, 10kA FP MCB

Instrument:- i) 03 nos. phase indicating lamp with toggle

switch & control fuse.

ii) 01 Set of Digital.MFM with CT & PT

(Duly factory wired)

Sub Total Cost (I) =

Non Sch

a)250mm Dia PVC

b) 300 mm Dia Metal Industrial

DSR-Sch

Non-Sch

Supply, Testing & commissioning of 1 no of 10 watt LED Lamp(White) as per EIC of approved makeincluding the cost of material ,labor T & P as required as EIC.

Non Sch

Non Sch

Non Sch

Non Sch

Supply of Recess mounted maximum 36 W 600mmX600mm high efficient LED luminaire with white powder coated rough aluminium extruded housing with polycarbonate diffuser for Uniform illumination and wider light distribution. Minimum 93 Lumens/Watt system efficacy; 36 W providing minimum 3065 lm system output. LED chip life of 50,000 burning hours at L70. IP 20, CCT 5700K, CRI> 80. Luminaire driver should be Isolated and multistage constant current constant voltage APFC type. Driver should be BIS registered with Input voltage range of 150V to 270V ( nominal rated voltage – 240V) with minimum 4 KV surge protection, PF >0.95, THD <10% including with all, materials as required.

Supply, Testing & commissioning of Recess mounted LED Luminare including 36W LED(4'x1') fitting including the cost of labor & material T & P as required as EIC.

Non Sch

Non Sch

Sub Total Cost (II) =

Supply and laying of Cat6 4-pair 23AWG UTP Cable in the existing ISI marked PVC conduits for data and voiceincluding the cost of labor & material T & P as required as EIC.(Make: Tyco/ Legrand/ Digisol)

Supply, installation and commissioning of RJ-45Jack of Category 6 with Single-port British-style Face plate 86x86 mm with Curveture and Wall Mout Box l(G.I/PVC) , to be fixed in concealed manner in partition/wall by necessary bolts & nuts including the cost of labor & material T & P as required as EIC.( Make: Tyco/ Legrand/ Digisol)

Supply and Installation of Cat6 24-port loaded, Modular Jack Panel having 24-port individually replaceable module including the cost of labor & material T & P as required as EIC.. (Make: Tyco/ Legrand/ Digisol)

Supply, installation of Cat6 UTP 24AWG LSZH Patch Cord as required including the cost of labor & material T & P as required as EIC.. (Make: Tyco-AMP/ Legrand/ Digisol)

For 1 mtr. Long

For 2 mtr. Long

Supply and fixing of 9U/500D Wall Mount Rack with Accessories: The rack size should be 600W x 500D, Front frame integrated with top, bottom, front and two side panels for better rigidity and strength, Front Glass Door with Lock loaded, Compliance with standards shall be UL 2416., DIN 41494, IEC EN 60529, IEC EN 62262 , IEC EN 60068-2-11 , ISO 9001:2008 including Power Distribution Unit (06/16 Amp Indian-Standard - 06 Socket - Single Pole / Screw Mountable / 16 Amp MCB / Alternating Current - 16 Amp 3 Pin Plug with Power Cable 2.5 sq.mm 3 meter Lengt), 1 cooling Fan(230V AC - 90 CFM, dB 42), 2nos 1U Metal Cable manager with Plastic cable loops and H/W screw. Make: Valrack/Rittal/ APW

Supply and Installation of Dual band 802.11ac Wave2 2x2 MU-MIMO indoor WiFi-6 AP with inbuilt Mobility Express image for adopting 100 AP as centralised Wireless Controller without any extra licence and hardware supporting Gigabit 802.11 af n at PoE interface and console port including the cost of labor & material T & P as required as EIC. (Make: Digisol/Ruijie/CISCO)

Termination & link testing of LAN cable at both the end including the cost of labor & material T & P as required as EIC.

Supply and Installation of Indoor Dome IR Network Camera (1/2.7" CMOS sensor, Mini. Pixel of 2560*1920 or higher video quality, frame rate of Up To 25fps @ 4MP, H.265, H.264 & MJPEg video compression, 2.8mm Fixed lens, physical ICR filter of both day and night, 30mtr IR Distance,120dB WDR ,3Streams Supported, WDR , 3D-DNR for noise reduction, BLC, ICR, EXIR, Audio In and Out, Alam in and Out. IPv4/IPv6 network supported, IP67, IK10 rated for weatherproofing, ONVIF ver 2.2 or higher, PoE IEEE 802. 3af (UL, FCC, CE, BIS certified.) including the cost of labor & material T & P as required as EIC.(Make- Honeywell/UNV/Milesight)

Supply and Installation of Indoor Bullet IR Network Camera (1/2.7" CMOS sensor, Mini. Pixel of 2560*1920 or higher video quality, frame rate of Up To 25fps @ 4MP, H.265, H.264 & MJPEg video compression, 2.8mm Fixed lens, physical ICR filter of both day and night, 30mtr IR Distance,120dB WDR ,3Streams Supported, WDR , 3D-DNR for noise reduction, BLC, ICR, EXIR, Audio In and Out, Alam in and Out. IPv4/IPv6 network supported, IP67, IK10 rated for weatherproofing, ONVIF ver 2.2 or higher, PoE IEEE 802. 3af (UL, FCC, CE, BIS certified.) including the cost of labor & material T & P as required as EIC. Make- (Make- Honeywell/UNV/Milesight)

Supply and Installation of 16CH 4 SATA NVR Support 12MP/8MP / 5MP / 4MP / 3MP / 1080P / 960P IP Adopt standard H.265 high profile compression format, With 4k Video Output, Compression Standard H.265, Network Access Bandwidth 320Mbps, HDD SATA × 8(Upto 10TB Supported), 1- e-SATA And 2-way Audio RCA × 1, Local Output RCA × 1, USB 2.0 × 2 (one in the front panel and the other in the rear panel), USB 3.0 × 1 (rear panel) (UL, FCC, CE, BIS certified) including the cost of labor & material T & P as required as EIC. Make- Honeywell/UNV/Hikvision

SITC of 4 TB Storage Capacity,including the cost of labor & material T & P as required as EIC. Make: Segate/WD

Supply and Installation of 45" UHD (3,840 x 2,160) TV with 300 nits brightness,10W+10W Audio Output,Crestron Connected®, NTP sync timer, BEACON, Embedded CM (contents manager), Soft AP, WiFi , Screen Share (Miracast), DIAL, Bluetooth Audio Playback,Hotel Mode , Welcome Screen (Splash Image), Insert Image, One Channel Map, IP Channel Manager, External Speaker Out , Remote jack pack, Moving Picture Playback, Auto Off / Sleep Timer,Smart Energy Saving, Motion Eye Care,USB Cloning, WOL, Interface : Set Side - HDMI In 3, USB 1, CI Slot, RF In, Digital Audio Out (Optical), RS-232C, RJ45 , External Speaker Out,Power Consumption(Typ.)-145 W, with 3years Warranty including the cost of labor & material T & P as required as EIC. Make: Samsung/ LG /SONY

SITC of IP PBX System support up to 500 users and minimum 50 concurrent calls, integrated 1 PSTN trunk FXO ports through External Gateway, 1 analog telephone FXS ports with lifeline capability and up to 50 SIP trunk accounts, Gigabit network ports with Integrates PoE, USB, SD card, Supports up to a 5-level IVR (Interactive Voice Response), Supports any SIP video endpoint that uses the H.264, H.263 or H.263+ codecs. (Make: Grandstream/NEC/Matrix)

Supply & fixing of IP Based PoE Phone, 2 SIP accounts, 2 line keys, 3-way conferencing, 3 XML programmable context-sensitive soft keys, Dual-switched 10/100 mbps ports, integrated PoE, HD audio on speakerphone and handset. Make: Grandstream/NEC/Mitel

Sub Total Cost (III) =

Electrical Motor Driven Terrace Pump Location - Terrace:

450 lpm 35 m Head

i) Supplying, installing, testing & commissioning of fire authority approved electrically driven Terrace pump suitable for automatic/manual operation consisting of the following:

ii) Horizontal centrifugal end suction type fire pump capable of delivering 450 LPM against a total head of 35 M while running at 2900 r.p.m. complete with burdon type pressure gauge with Gun metal cocks/ valves etc. on the delivery side, including bypass arrangement. Gland arrangement shall be included.

iii) Squirrel cage, TEFC induction motor suitable for 415 ± 6%V, 3 phase, 50 Hz A.C. supply of suitable H.P. for the above pump running at 2900 r.p.m. conforming to IP 55 pralecting and class 'H' insulation. The motor shall be conform to IS:325-1978 (upto date)

iv) Common bed plate for mounting pump & motor of requisite strength manufactured out of M.S. channel as per manufacturer's recommendation.

v) Antivibration (Cushy foot) heavy duty mounting pads as per requirement.

vi) Coupling and coupling guard for direct coupling of motor and pump.

vii) Terrace Fire Pump

Flow rate : 450 LPM (27.00 m3/hr)

Pumping Head : 35 M

Motor KW : 7.5 KW (Approx) or As per manufacturer recommendation

Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :

Providing, fitting & fixing of following size cast iron double flanged slim seal wafer type Butterfly valves with EPDM rubber lined with lever operated as per IS-13095 with ISI mark of pressure ratting PN-1.60 including fixing the same with supply of required jointing materials like rubber insertion, MS nuts & bolts, paint etc. and testing the joints with required water pressure for all floors etc. all complete as per specification & direction of E.I.C. Make-KIRLOSKAR/IVC/ZOLOTO/KARTAR/HONEYWELL

Providing, fitting & fixing of following size cast iron double flanged Y type strainer with SS 304 perforated screen confirming to IS 1538 with ISI mark of pressure rating PN-1.60 including fixing the same with supply of required jointing materials like rubber insertion, MS nuts & bolts, paint etc. and testing the joints with required water pressure & all complete as per specification & direction of E.I.C. Make-KIRLOSKAR/IVC/ZOLOTO/VENUS/HONEYWELL

Providing, fixing, testing & commissioning of C.I. dual plate Non-return valve [PN 1.6 Rating (10kg/cm2] conforming to IS 778 and test pressure not less than 15 kg/cm2, complete 2 nos. matching flanges, rubber insertion, with nuts, bolts and washers etc of following sizes as per the instruction of EIC . Make-KIRLOSKAR/IVC/ZOLOTO/KARTAR/HONEYWELL

SITC of Gun metal chrome finished Ball valves with fittings of screwed end type.

MCC Panel

Supply, installation, testing and commissioning of Wall mounted sectionalised, front operated top entry dust and vermin proof M.V.Panel Boards suitable for operation at 415V, 3 phase, 4 wire, 50Hz distribution system fabricated out of 2.0 mm thick CRCA sheet, insulated busbar with heat shrienkable PVC sleeve, base channel, complete with all accessories as required. Make:-LEGRAND, L&T, ABB or equivalent

One (1) - DOL with O/L and Single Phasing Preventor suitable for 7.5 HP motor. ON/OFF indication lamps, Auto manual switch and ON/OFF push button.

One (1) - Set of Auxilliary relay for automatic operation through pressure switch.

Panel As Above

Supply, laying, connecting, testing & commissioning of following size of 1.1 kv grade multicore aluminium/ copper conductor XLPE insulated PVC sheathed armoured cable as per IS: 7098:1988 (Part-I) with upto date amendments etc. complete as required. Tagging on both the ends will be done with aluminium tags etc. complete as required.(Quantities as per site requirement shall be finally estimated & executed accordingly with prior approval.)

Supplying and making indoor end termination with brass compression gland (Heavy duty) and suitable copper / aluminium lugs for following size of XLPE insulated PVC sheathed copper/ aluminium conductor armoured/ unarmoured cable of 1.1 KV grade including cost of ferrules, cable sockets, insulation tape & other accessories etc. complete as required.

Providing and fixing following size of GI strips/ GI wire etc. on surface or in recess for connections, including GI clamps etc. as required.

Providing, fixing, testing & commissioning of Stainless steel single headed ISI marked oblique pattern hydrant landing valves with 80mm dia flanged inlet & 63 mm dia instantaneous type female outlet complete with stainless steel cap and GI chain, twist release type plugh and all accessories as per IS : 5290 -1993 (Type 'A') including fixing with anchor fasteners and flanged tapping from wet riser all complete as per specification & direction of EIC.

Providing, fixing, testing & commissioning of 15 m/30 m long non-perlocating, rubber reinforced lined fire hose pipe (as per IS : 636-1979, Type A) of 63 mm dia and length as described below. The hose shall be rated for brust pressure of 35.7 Kg/sqcm. Hose shall be complete with ISI marked SS male & female coupling (IS:903) bound & rivetted to hose pipe with copper rivets & 1.5 mm copper wire as per the instruction of EIC. (Internal fire hydrant)

Providing, fixing, testing & commissioning of 63 mm dia Instantaneous Pattern (male) Stainless Steel short size branch pipe with nozzle of 20 mm nominal bore outlet as per IS:903 : 1993 suitable to fit with standard instantaneous type 63mm dia coupling ISI marked (IS:903:1993) complete.

Supply,Installation,Testing & Commissioning of Swinging pattern wall fixing first aid hose reel made from MS sheet ,spray painted in Post office Red, confirming IS: 884 and moving parts complete with:

a) MS fabricated hose reel drum to accommodate 20 mm dia 36 mtr long hose with fixing bracket.

b) 20 mm dia X 30 Mtr long water hose with ABS(Plastic) shut-off nozzle as per IS: 444/IS: 12585 Type-I.

c) 25 mm dia GM Ball Valve at inlet side of the hose reel drum as required.

Providing supply & fixing of weather proof MS Hose Box for of suitable size(750X600X250mm) to accomodate 2 nos. of 15/ 1 no of 30 mtr long fire hose and a branch pipe, wall mounted type as per direction of Engineer-in-charge.

Providing, fixing, testing & commissioning of ball valve with SS ball suitable for test pressure of not less than 15 kg / sq.cm of the following size with nuts, bolts, gaskets, necessary accessories, etc as required.

Providing level controllers, PRESURE SWITCHES, wiring, cabling from level controller / pressure switch to panel etc. complete as required to operated the system automatic/manual. Pump shall be protected against running dry. (Indfoss/Danfoss) IPS-100

Supply,Installation,Testing & Commissioning of Pressure gauge of 0-16 Kgf/sq.cm. range with cut-off bronze ball valves below of suitable size with all accessories as per direction of Engineer-in-charge.

Sub-Total :

Supply, Installation, Testing and Commissioning of Conventional Fire Detection and Alarm System

CONTROL EQUIPMENTS:

S/F Fire alarm Control panel with 10 zone capacity with battery back up. The panel would be modular, decentralized, with The panel shall be consisting with LCD display andh. with 12V battery back up for 30 Minutes and battery charger in built as required . Make: Honeywell/ASES (Vds approved)

DETECTORS & OTHER MODULES (MAKE - Honeywell/ASES/System Sensor)

Supplying and fixing conventional Manual Call Point with MS body and glass to be supplied with hammer and chain with testing and commissiong etc as reqd.

Supplying, installation, testing & commissioning of smoke detector with builtin LED and mounting base complete with all connections etc. as required.

Supplying, Installing, testing and commissioning of Horn wall mounted type rated at 82 dBA @ 3m for Audible annunciation and 75cd flashintg at 1 Hz for visual indication.

Supplying and laying of 2x1.5 sq.mm. ISI marked copper armourd conductor cable with gland scoket and other wiring accessories on the existing surface/tray/shaft etc as reqd

S/F 4.5 kg CO2 type fire Extinguisher with maounting arrangement as reqd.

S/F 6.0 kg ABC type fire Extinguisher with maounting arrangement as reqd.

Sub-Total:

G-Total (IV) :

Supplying the following Size PVC/ XLPE insulated PVC seathed Alluminium unaromour cable of 1.1 kV as per IS 1554 etc as reqd.

a- 3 core 6 sq.mm (Post Top Lights)

b- 4 core 10 sq.mm -

b- 4 core 16 sq.mm -

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required

Laying and fixing of one number .following size cable direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. ISI mark Aluminum/copper conductor, XLPE insulated cable, FRLS PVC, galvanized steel flat strip armoured and overall PVC sheathed cable conforming to IS: 7098 (Part - I) with latest amendments & complete all as required

Laying and fixing of one number of following size of cable on wall surface as required, ISI mark Aluminum/copper conductor, XLPE insulated cable, FRLS PVC, galvanized steel flat strip armoured and overall PVC sheathed cable conforming to IS: 7098 (Part - I) with latest amendments & complete all as required

Supplying and making end termination with brass compression gland and aluminium lugs/copper for following size of PVC insulated and PVC sheathed / XLPE aluminium/copper conductor cable of 1.1 KV grade as required.

Panels .

Design, supply, installation, testing and commsioning of cubicle main panel for indoor/Outdoor installation of wether prrof design as per IP 44 class, made out of 2 mm thick CRCA sheet as per the drawing with cubicle type inernal arrangement of 1.6 mm thick sheet and with front & back opening system suitable for mounting following switch gears, busbars, metering unit, including painting with powder coated paint of approved colour and shed with earthing the body etc as reqd including all other materials & . as directed by site-incharge.. (drawing shall be approved by engineer -in charge)

OUTDOOR JB (IOutdoor, Floorl mounted)

Incommer:-i) 01 no. 63A., 4P Isolator

Bus bar:- 04 nos. 100A. Al. bus bar duly sleeved.

Outgoing:-

i) 09 nos. 10/16A SP MCB,02 nos. 32A FP MCB

Instrument:- 03 nos. phase indicating lamp with

control fuse.(Duly factory wired)

EARTHING-:

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Supplying and laying 25 mm x 5 mm G.I earth strip ISI marked at 0.5 meter below grond level as strip earth electrode including soldering etc. as required

Supply, delivery & installation of GI coil earthing made out of 8 swg GI wire closely wound in shape of a helical coil of 50mm diameter with 115 numbers of turns including excavation of earthpit of size 800x 800x 1500mm in all kinds of soil, back filling the excavated pit with alternate layers of salt, charcoal around the coil with a diameter of 300mm upto 1000mm and balance by good quality soil, end termination complete as required.

FITTING & FIXTURE-:

Supply inspection testing & Commissioning Mild Steel Pole, Mild Steel Bracket , Cast Aluminum lighting fixture , Stainless screws, Corrosion & UV ray resistant coating.. Of 7000mm height with single Arm of 1000 mm with 1 no 40/45 wt Street Light along with J Bolts. The pole should have 6 Amps 10 KA SP MCB connectors suitable for 6 / 16 sqmm termination complete with DIN bar, shooting Links, end lock etc as required and 3 x 4 sqmm double PVC insulated summer sable copper conductor cable with junction box to the luminaries completely including terminations with insulated copper lug etc. (Make-Homdec Model No - HL-2843Single Arm /SS make of K-LITE-KP-7287 P1/ HALONIX /PANASONIC/K-LITE/HAVELLS/BAJAJ)

Supply inspection testing & Commissioning Mild Steel Pole , Mild Steel Bracket , Cast Aluminum lighting fixture ,Stainless screws, Corrosion & UV ray resistant coating.. Of 7000mm height with double Arm of 1000 mm in each side with 2 Nos. of 40/45 wt Street Light along with J Bolts. The pole should have 6 Amps 10 KA SP MCB connectors suitable for 6 / 16 sqmm termination complete with DIN bar, shooting Links, end lock etc as required and 3 x 4 sqmm double PVC insulated summer sable copper conductor cable with junction box to the luminaries completely including terminations with insulated copper lug etc. (Make-Homdec Model No - HL-2843Double Arm /SS make of K-LITE-KP-7287 P1 /HALONIX /PANASONIC/K-LITE/HAVELLS/BAJAJ)

Supply, Installation,Testing & commissioning of 3W LED IP-65 outdoor Foot/Floor washer light as per EIC of approved make including with all,., materials & labour.(Make-Homdec /SS make of /HALONIX /PANASONIC/HAVELLS/K-LITE/WIPRO)

Supply, Installation,Testing & commissioning of 16M high mast shaft in two section suitable for 39 m/sec wind speed along with head frame, luminaires carriage suitable for 08 luminaires in symmetrical arrangement and other accessories manufactured in factory with raising lowering system comprising double drum winch, 5mm diameter SS wire rope, trailing cable, connector, integral power tool motor, manual handle, junction box, lightning finial. & foundation bolts manufactured from special steel along with nuts, washers, anchor plate and common template including LED floodlight luminaries 8nos X 200 W LED with LED type single dome aviation obstruction light.Also with outdoor stand mounted feeder pillar with 32A TPN MCB incomer, single dial time switch, 25A TP contactor for the automatic switching of luminaries, power tool control with 2 no 9A contactors and raise lower push button, Incoming 35 sq. mm and out going 16 & 2.5 sq. mm terminals as per EIC of approved make including with all,., materials & labour.(Make-Homdec /SS make of /HALONIX /PANASONIC/HAVELLS/K-LITE/BAJAJ)

Supply, Installation,Testing & commissioning of Flood light with akuminium die cast housing luminaire with unique lens system for uniform illuminationand toughhened glass with silicon gasket for IP-66 including 150watt LED luminairs as per EIC of approved make including with all,., materials & labour.. (Make WIPRO-Model-LF20-192-060-57-G2//SS make of Jaquar-LFDSLM150XC /HALONIX /PANASONIC/HAVELLS/K-LITE/WIPRO )

Supply, Installation,Testing & commissioning of Post Top light with Mild steel Base Plate & pole ,Cast Aluminium Embellishment ,Stainless steel and Aluminium Lighting fixture, Silicon & EPDM rubber gasket, stainless steel screw, PMMA diffuser, corrosion and U.V ray resistant coating. Height 4075 mm IP-66 including 30watt LED bulb as per EIC of approved make including with all,., materials & labour.. .(Make-Homdec -HLMSP- 268-2387 /SS make of K-LITES -KP-4327 P11/HAVELLS/PANASONIC/WIPRO)

SITC of 2'-0"height designed Bollard light with 8W LED lamp of( reputed make) with holder ,240V Single phase AC complete with Lamp,RCC Base & all other levies etc. as required as per EIC. (Make JAQUAR/ Philips /CG/ Wipro/ HAVELLS/K-LITE) )

Supply, Installation,Testing & commissioning of IP-65, LED Garden Spike Light including 1 no. of 6 watt LED luminairs & Base with Brick Masonry work(200x200x200)mm for the above fitting as per EIC of approved make including with all,., materials & labour.. (Make JAQUAR/ Philips /CG/ Wipro/ HAVELLS/K-LITE)

Supply, Installation,Testing & commissioning of elegant look 40 W AIO Solar street lights having 100 Wp highly efficient Monocrystalline PV module for faster charging of battery in adverse weather condition & 36 Ah LiFePo4 Battery (Lithium Ferrophosphate) Battery (BIS approved) which will be kept inside the luminaire house (Theft retardant type), MPPT charge controller & PIR Sensor. The initial lumen output of AIO street light is 6400 lumen in CCT 6500K (+/-500K) as per LM 79 report of third party NABL lab . The LED chip will be of OSRAM/NISCHIA/CREE only .The complete system & BMS has been designed in such a way to provide 2 days (24 Hrs) back up with dimming mode by activating PIR sensor and battery is completely theft retardant and maintenance free . The luminaire is having IP 65 protection for critical component like (LED compartment, Driver compartment & Battery) and is as per IP test report of third party NABL lab . The AIO street light is having IK 07 (as per the test report of third party NABL lab). The luminaire is having the provision the tiltable/ adjustable mounting bracket to mount it on the top of the octagonal pole directly. (Warranty on the complete AIO street lights will be 5 years .) INCULDING 7 mtr octagonal pole having bottom dia of 130 mm A/F and top dia of 70 mm A/F. made up from 4 mm thick sheet and Base plate . The octagonal pole will be supplied along with 4 nos. J type foundation bolts. The Octagonal pole shall have no door opening including with all,., materials & labour.(Make-PANASONIC /SS make of /HALONIX /SURYA/HAVELLS/WIPRO) ) .

Sub Total Cost (V) =

Grand Total (I + II + III + IV + V) =

Tender for Repair and Renovation work of Anganwadi Training Centre, Ganjam at Ganjam Districts, Odisha (2nd Call)

NIT No: PCO/BBSR/1010/233 Date-23.12.2025

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge

Ground Floor

First Floor

Terrace

Supplying all materials, Labour, T & P & fitting and fixing of following different water supply fitting as per ASTMD-2846 with supply of all necessary joint materials etc all complete as per direction of engineer-in-charge

Cutting grooves in pucca floors and walls for taking GI/PVC pipes and making good the damages as per specification complete

15mm to 32mm dia pipe

Ground Floor

First Floor

Providing and Fixing water closet, squatting pan (Indian type W.C pan) conforming to IS 2556 : Part 32004 duly embedded in cement concrete (1:4:8) using hard granite metal 4cm nominal size all complete as per specification

Ground Floor

First Floor

Providing and Fixing in cement mortar (1:3) a pair of foot rest for I.W.C Pan

Ground Floor

First Floor

Providing and Fixing 100mm size ‘P’ or ‘S’ trap (with horn or without horn) for water closet squatting pan including jointing the trap with pan in cement mortar (1:1) as per specification.

Ground Floor

First Floor

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.

Ground Floor

First Floor

Providing & Fixing Wash Down Water Closet (European type W.C pan) with integral ‘S’ or ‘P’ trap conforming to IS 2556 : Part 8-2004, to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete as per specification

Fixing PVC Standard seat cover (Colour) for wash down water closet with chromium plated brass hinges and rubber buffers all complete as per specification

Providing and fixing P.V.C. 10 litre capacity (low level ) (Colour) ( with fittings, accessories and flush pipe) with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.

Ground Floor

Providing and Fixing wash basins with hole for pillar taps confirming to IS 2556 Part 4-2004 with cast iron or M.S brackets painted white including cutting holes in walls and making good the damages etc all complete as per specification

Below counter Wash Basin

Ground Floor

First Floor

Providing and Fixing PVC waste pipe with fittings of following nominal diameter for wash basin or sink including brass check nut complete as per specification.

Ground Floor

First Floor

Providing and Fixing Chromium Plated brass waste coupling of the following nominal diameter for wash basin and sink as per specification

Ground Floor

First Floor

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required (24" x 18" x 10" steel sink single blow (Parrware)

Providing and Fixing PVC 32mm x 1150mm long waste pipe with fittings of following nominal diameter for wash basin or sink including brass check nut complete as per specification.

Ground Floor

Providing and Fixing Chromium Plated brass waste coupling of the following nominal diameter for wash basin and sink as per specification

Ground Floor

Supplying all materials, labour, taxes,T&P for fitting & fixing of different water supply CP, Brass or GM concealed fitting and fixtures of ISI approved make of following sizes and specification with leak proof threaded joints tightened with spun yam and white zinc or any other method as required and directed including testing and rectification of defects after testing,including cost of all labours,materials,conveyance,loading and unloading,all taxs and royalies, sundries and T&P etc all compete as per direction of the Engineer-in-charge.

xviii

Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expension,(i) Single socketed pipes.

110MM OD P.V.C SWR S/S PIPE(ISI TYPEA)

Supply all material, labour ,T&P ,fitting and fixing UPVC SWR Type B pipes & fitting of approved make conforming to IS-13592 including jointing of approved solvent cement non-heat application method including testing of as per stanard specification, both below & above ground level/floor & on walls including supply of bobbins,nains,screws,wooden cleant,pipe clamps as per requirement including cutting walls & floor & making good the damages with cement concrete (1:2:4) with hard granite chips, including scaffolding wherever necessary all complete with requisite testing as per direction of the EIC

Ground Floor

First Floor

Ground Floor

First Floor

Providing and fixing pvc gully trap compete with grating brick masonry chamber with water tight SFRC cover with frame of 300*300 mm size(inside)the weight of cover to be notless than 4.50kg and frame to be not less than 2.70kg as per standard design:100*100 mm size P type .including cost of all labours,material,conveyance,loading and unloading,all taxes and royalties,sundries and T&P etc all complete as per direction of the Engineer-in-change.

With flyash bricks of minimum compressive strength 75 kg/sqcm (Size 300 x 300 x 300 mm)

Constructing brick masonary chamber for underground SFRC inspection chamber and bends with brick in cement mortar 1:4 (1 cement :4 coarse sand )SFRC cover with frame 455*610mm internal dimensions ,total weight of cover with frame be not less than 38kg (weight of cover 23kg and weight of frame 15 kg), R.C.C TOP SLAB WITH 1:2:4mix(1 cement:2 coarse sad:4 graded stone aggregate 20mm nominal size ),foundation concrete 1:5:10(1 cement :5 fine sand :10 graded stone aggregate 40mm nominal size)insideplastering 12mm thick with cement mortar 1:3(i cement:3 coarse sand),finished smooth with a floating coat of neat cement on walls and bed concrete etc.compete as per standard design Including all cost of labour,material,T&P etc.all compete as per the engineer-in-charge.

Inside dimensions 600*850mmand 45cm deep for pipe line with three or more inlets.

Providing and fixing of AQUAGUARD PURE CHILL 80 PSS UV etc.including all cost of labour,material,testing,transporatation etc all complete as per the direction of Engineer-in-charge.

Supplying, laying, jointing,fitting and fixing, testing and commission-ing uPVC foam core structured pipes confirming to IS certification with SN4 or SN8 Solvent Cement joints with or without rubber ring for Soil Pipes and coupler complete for external sewerage system, including supply of bobbins, nails, screws, wooden cleats, pipe clamps as per requirement.including cost of all labours, materials, conveyance, loading and unloading, all taxes and sundries and T&P etc all complete as per direction of the Engineer -in-charge.

Constructing RCC manhole in with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 6 mm thick with cement mortar 1:4 (1 cement : 4 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : all complete as per the direction of Engineer in charge.

Inside size 90x80 cm and 45 cm deep including CI Cover with frame 455x610 mm internal diameter, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg)

Providing and laying in trench cement concrete ( 1:4:8 ) with 40mm size hard granite metal in the following type of surrounding or encasing salt-glazed stoneware pipes of the following internal diameter including concrete for bedding and curing complete as per PH specification .

Supplying all materials,labour,T&P and fixing PVC water storage tanks of as required capacity confirming to IS:12701-1996 including cutting holes through the tank and fixing pvc pipe and fittings and providing extre sockets and jam nuts,fixing ball valve etc,including conveyance of all materials to work site etc all complete as per specification and direction of Engineer-in-charge.(Sintex/Equivalent)

TOTAL

Earth work in excavation by mechanical means (Hydraulic excavator) in foundation trenches or drains, including dressing of sides and ramming of bottoms and dewatering wherever required, including all lifts, including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 5km including cost of all labours/ equipments ,sundries and T&P etc all complete as per the direction of Engineer-in-charge.

All kinds of soil

Filling in foundation, trenches and plinth with river sand, well watered and compacted in layers of with top surface dressed and leveled to proper gradient including cost of all materials, conveyance, all and royalties, loading and unloading, including cost of all labour, sundries ,T & P etc. complete as per directions of the Engineer -in-charge.

Providing and laying of Cement Concrete of grade 1: 3 :6 (1 cement : 3 sand : 6 graded stone aggregate of size 25mm to 40 mm hard granite crusher broken metal ), mixing in concrete mixer ,lowering and compacting in proper thickness , watering & curing for the required period .including all cost of labour ,material, conveyance,royalties and ,sundries ,T & P etc. complete as per the directions of Engineer-in-charge.

Providing and laying of Cement Concrete of grade 1: 2: 4 (1cement : 2 sand : 4 graded 12mm size hard granite chips ) , mixing in concrete mixer ,lowering and compacting in proper thickness , watering & curing for the required period ..including cost of all labours, materials, conveyance, loading and unloading, all taxes and royalties, sundries and T&P etc all complete as per direction of the Engineer -in-charge

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering etc. including all lead and lift, cost of labour ,material, conveyance,royalties and taxes ,sundries ,T & P etc.complete as per the directions of Engineer-in-charge.

Providing ,Lifting, Hoisting & Laying Reinforced Cement Concrete of M-25 Grade in all type of Concrete works as per IS Specification, including cost of required steel/wood/ply centering and shuttering there after dismantling and removing the debrises away from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading,stacking, royalties of all materials, cost of all labours, scaffolding, sundries, T&P required for the work etc. complete in all respect but excluding cost of Reinforcement and Binding wires etc.

RCC Base

RCC Wall

Roof Slab

Providing & fixing Thermo mechanically treated bars (Fe-500 D) Reinforcement bars of approved make for RCC work of required diameter & of approved quality including straightening, cutting, bending, binding, welding , joining (if necessary), tying the grills, hoisting, lowering and placing in position as per the approved design & drawings with provision for fan hooks where required including the cost, conveyance of reinforcement bars or tor steel and binding wires of 18 to 20 gauge, cost of all labour, loading, unloading, labour cess, T&P, etc. required for the work complete for the work in all heights as per the specification & excluding GST as direction of Engineer-in-Charge. (Linear measurements will be taken & quantity will be calculated on standard weight. Weight of binding wire will not be considered for measurement. No payment will be made for overlap, couplings, welded joints spacer bars,stays, hangers and wastage. Cost of these items shall be deemed to be included in the rates for reinforcement)

Providing 6mm thick cement plaster with cement mortar of (1:4) to ceilings of roof slabs, stairs, landings, chajja, shelves, columns, beams and lofts etc. including roughening, scraping and cleaning and finishing the plastered surface smooth using wooden floats only to proper plumbs and level, making grooves and beads to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, all taxes and royalties, all labour, scaffolding, watering and curing , sundries and T&P etc all complete as per direction of the Engineer -in-charge.

Vent pipe

500X500MM SQUARE MAN HOLE COVER

Earth work in excavation by mechanical means (Hydraulic excavator) in foundation trenches or drains, including dressing of sides and ramming of bottoms and dewatering wherever required, including all lifts, including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 5km including cost of all labours/ equipments ,sundries and T&P etc all complete as per the direction of Engineer-in-charge.

All kinds of soil

Filling in foundation, trenches and plinth with river sand, well watered and compacted in layers of with top surface dressed and leveled to proper gradient including cost of all materials, conveyance, all and royalties, loading and unloading, including cost of all labour, sundries ,T & P etc. complete as per directions of the Engineer -in-charge.

Providing and laying of Cement Concrete of grade 1: 3 :6 (1 cement : 3 sand : 6 graded stone aggregate of size 25mm to 40 mm hard granite crusher broken metal ), mixing in concrete mixer ,lowering and compacting in proper thickness , watering & curing for the required period .including all cost of labour ,material, conveyance,royalties and ,sundries ,T & P etc. complete as per the directions of Engineer-in-charge.

Honey comb masonry with 25cm ×12cm ×8cm size Kiln burnt bricks having crushing strength not less than 75 kg/cm2 Including cost of conveyance ,taxes & royalties, loading and unloading of all materials & cost of all labour, scaffolding ,watering & curing ,sundries, T & P etc. complete as per the direction of Engineer-in-charge .

Supplying, filling, spreading of dry brick khoa of size range 4 cm in soak pit, etc. including cost of all labours, materials, conveyance, loading and unloading, all taxes and royalties,watering and curing, sundries and T&P etc all complete as per direction of the Engineer -in-charge..

Providing and placing in position 100 mm thick factory made machine batched & machine mixed Precast RCC Covers of M-25 grade cement concrete for RCC work, including cost of centering, shuttering, reinforcement of 8 mm dia TMT bars of Fe 500 grade @ maximum 100mm c/c on both ways , neat cement punning on finished surface, properly encased on all edges with 1.6 mm thick , 100 mm wide MS sheet duly painted over priming coat , reinforcement to be welded at edges with MS sheet and providing 2 Nos. 12 mm dia bar for hooks etc i/c cost of cartage, all leads & lift, handling at site etc. all complete as per direction of Engineer-in-Charge.

SUB TOTAL

Please Enable Macros to View BoQ information