SPECIAL REPAIRS/ REPLACEMENT OF BER CENTRIFUGAL PUMP SET AND VT PUMP AND SOLAR LIGHT (06 X SOLAR STREET LIGHTS) AT CLP-36 INSIDE DEPOT AREA AT CAD PULGAON

Supply, Install, testing and commisioning of Pumping set centrifugal copper wound, DSM 125/40 , with bronze impeller, 1480 RPM, Discharge Head 100 Mtr and 2850 LPM stainless steel shaft,chrome steel shaft sleeve etc, electric driven 3 phase 430 volts AC 50 Hz, supplied and installed complete 100 HP inclusive of priming arrangement, PCC foundation, MS base channel required at site complete, including foundation bolts/Nuts MS suction pipe flanged, welded including all jointing materials, 250 mm dia pipe of suitable length ( to draw water from underground sump up to pump, including all accessories of pumps, and motor including supply, fixing and making electrical connection from LT panel to star delta starter and starter to motor with PVC insulated multi stranded copper conductor single core cable of suitable size encased in PVC Conduit pipe of suitable size including all acessories adapter ,MS pipe etc. for installation of pump including all civil and piping work to install pump at site complete all as specified and directed Make-Kirloskar/ABB/Bjarat Bijlee.

Supply & Install of submersible (vertical) pump set copper wound of capacity 60HP electric driven,RPM-1450rpm, Driver rating-45KW, 415 volt,50HZ head 60 mtr, flow 3000 LPM, Outlet size pipe 200mm bore pump housing,Strainer & Diffuser casing is Stainless steel, NRV,Suction Housing DOL is Cast iron Impellers & Diffusers is Noryl type, Pump Low power consumption, Corrosion and abrasion resistance part ,Less vibration and lower noise level lowering, commissioning and testing on full load complete all as specified and directed by Engr-in-Charge. Make-Kirloskar/ABB/Bjarat Bijlee Basic informatiom (a) Pump Type : BHR28-18° (b) Stages : 3 NOS (c) Lubrication : SELF WATER LUB. (d) Suspension Length (W/O Strainer) : 17,680 mm (e) Pump Unit Length (W/O Strainer) : 1,280 mm (f) Strainer Height : 500 mm (g) Thrust Bearing Type & Size : ANTIFRICTION , X7318B Head Unit Details (a) Discharge Head Height : 680 mm (b) Lower Stool Height : - (c) Motor Stool Height : 310 mm (d) Pump & Motor Coupling Diameter : 220 mm (e) Pump Base Dimensions : 650 mm X 850 mm Driver Details (a) Prime Mover Type : Electric Motor (b) Driver Rating : 45KW (c) RPM : 1450 rpm (d) Hp / N Ratio : 0.04 Note :- (i) For Item no. 1 & 2 The rate quoted for this item shall includes labour charge for commissioning (ii) Cost of other minor items/ spares such as nut, bolts, washer, gaskets,paints etc for efffective functioning of the plant shall be deemed to included in this items.

M&L for CI/DI special/ fittings suitable for CI flanged/socket ends pipe upto 200 to 300 mm bore dia such as bends, (any radius and angle), tapers any type (straight, bend, increasing, decreasing or double socket etc) tee piece, single branch 'Y' junction, double branch, cross (all flanged), collars, caps & plug, tail pieces, reducers etc. complete all as specified and as directed.

Disconnecting and taking down exiting unserviceable Street lights/flood lights any type/watts from pole/wall complete all as specified and directed. by EIC

Supply, installation, testing and commissioning of all-in-one integrated LED solar street lighting system with 7 meter long hot dip galvanized pole (minimum 70 micron coating), Made in India, consisting of solar photovoltaic module, battery, control electronics, LED driver, interconnecting cables and pole mounting arrangement, all integrated into a single luminaire unit, complete as required. System shall operate automatically from dusk to dawn with inbuilt controller. 1. Luminaire The luminaire shall be equipped with highly efficient mid-power white LEDs of minimum 60 W, having a lumen output of minimum 8500 lumens, with a correlated color temperature (CCT) of 5700K and CRI ≥ 70. The luminaire shall have high-efficiency optical lenses ensuring uniform light distribution suitable for secondary roads.The luminaire and battery enclosure shall have a minimum IP65 protection rating. The system shall be provided with an integrated microprocessor-based MPPT charge controller with driver mounted on the same PCB to minimize pow No motion: 25% Next 4 hours: Motion: 40% No motion: 25% Next 6 hours: Fixed: 25% Remaining night:Motion: 40% No motion: 25% 3. Solar Module The solar module shall be made of premium grade mono-crystalline silicon cells with a minimum capacity of 120 Wp at 18V (Vmpp). The module shall be of low iron tempered glass with anti-reflective coating and suitable for outdoor application. 4. Battery The system shall be provided with a minimum 42 Ah, 12.8 V DC Lithium Ferro Phosphate (LiFePO₄) battery pack with inbuilt Battery Management System (BMS) having necessary protections. The system shall have a minimum 2–3 days battery backup (autonomy). 5. Standards & Certification The successful bidder shall submit: LM-79 report (luminaire) LM-80 report (LEDs) 6. Approved Makes Philips / Crompton / Wipro / Equivalent or better 7. Foundation & Installation The quoted rate shall include: Excavation work MS work PCC work Foundation details: Size: 400 mm × 400 mm × 1200 mm Concrete grade: M20 Foundation bolts: Diameter: 20 mm Length: 600 mm All materials, labour, transportation, loading/unloading and complete installation shall be included in the quoted rate. Model/Cat part No : Philips BRP111 LED120/757 G2 Solar /CROMPTON, WIPRO, HAVELLS , BAJAJ, SYSKA