Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.0 LAccepted-AOC | L1 | Accepted-AOC Lowest Tenderer | |
| 2 | L2₹7.1 L+₹17,436 (2.50%)Rejected-Finance 0 MANPUR CHITBARAGAON CHITBARAGAON BALLIA UTTAR PRADESH 221713 | BALLIA | UTTAR PRADESH | 221713 | L2 | Rejected-Finance Other than lowest tenderer | |
| 3 | L3₹7.6 L+₹65,176 (9.35%)Rejected-Finance | L3 | Rejected-Finance Other than lowest tenderer | |
| 4 | L4₹7.8 L+₹79,111 (11.3%)Rejected-Finance | L4 | Rejected-Finance Other than lowest tenderer |
Tender Value
₹8.0 L
EMD Value
₹16,080
Closing Date
27 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE (I) CIF (R)
AGE (I) CIF (R) C/O 56 APO
REPAIR/MAINT TO CERTAIN OFFICES AND OFFRS ACCN AT HQ PALMA UNDER AGE (I) CIF (R).
2022_MES_531769_1
AGE(I)/R-11/2022-23
Open Tender
Civil Works
Item Rate
180 days
AGE (I) CIF(R)
MES in Class E and above and category a (i)
8 documents required · 8 mandatory
₹500
AGE (I) CIF (R)
₹16,080
Yes
29 Aug 2022
17 Jun 2022
29 Jul 2022
17 Jun 2022
27 Jul 2022
2 Jul 2022
Amount
Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) incl any types of tiles, complete all as specified and directed by engineer-in-charge.
Dismantiling Floor, hearth or Wall tiling including cement mortar bedding (but not baking), removing serviceable tiles to store and rubbish off the premises etc complete all as specified and directed.
Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed by engr-in-charge.
Dismantling of wall and ceiling boards of any thickness incl cover fillets etc complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by engr-in-charge.
Taking down cement or cement lime plaster, any description on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed by engr-in-charge.
M&L for 25mm thick cement concrete type B-1, 1:2:4 (20mm graded stone aggregate) as in sub floors finished even and rough to receive the topping layer complete all as specified and directed.
M&L for coloured Non Skid Joint less ceramic tiles of size 400mm X 400mm X 7mm thick, in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed by engineer-in-charge.
M&L for glazed ceramic coloured designer tiles 450 x 300x 7 mm thick as in Vertical surfaces set and jointed in neat cement slurry and jointed or coloured cement to match etc complete over 15 mm thick rendering in CM 1:4 all as specified and directed.
M&L for chequered cement concrete tiles 20cm x 20cm x 25mm thick,set, jointed and pointed in neat cement slurry in floors with grey cement and pigment over 20mm thick screed bed in cement mortar 1:4 complete all as specified.
M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement mortar 1:4 on walls finished even and smooth complete all as specified and directed by engr-in-charge.
M&L for preparation of new plastered surfaces and applying two coats of cement base paint on walls complete all as specified and directed by Engineer-in-charge.
M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement mortar 1:6 on walls finished even and smooth complete all as specified and directed by engr-in-charge.
M&L for preparation of new plastered surfaces and applying three coats of white wash on walls complete all as specified and directed by Engineer-in-charge.
S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed by engr-in-charge.
S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
S&F Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes,notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.
S&F anodised aluminium snap grid frame work of size 600 x 600 mm for false ceiling complete all as specified and directed by engr-in-charge.
S&F 8 mm th armstrong false ceiling board (595x595) mm size and fixed to snap grid ceiling frame work complete all as specified and directed by engr-in-charge.
Taking down carefully copper/aluminium point wiring (light/Fan socket or power) with complete fittings such as switch, sockets Ceiling rose pendent holders regulators etc. Removing old/UNSV material from site and making good the old disturbed surface.
M&L for Point wiring complete with 1.5 Sqmm single core multi stranded copper conductor cable PVC insulated unsheathed cable 1100 volt grade enclosed and including PVC casing and capping with fittings and accessories fixed to walls/ceiling by means of PVC rowl plugs fasteners with cadmium plated screws all as per IS including hard wood board PVC board and 3mm thick laminated sheet top covers including 1.5 Sqmm copper PVC insulated unsheathed continuous earth wire and connected to common earth dolly for the following:-
(a) One light/fan/5 Amp socket independent/bell controlled by one, one way switch.
(b) One three pin socket outlet 5 Amps independent board complete
(c) One 3 pin 5 Amp socket outlet on the same board with other switches.
All as per item No 21 above but with 2.5 Sqmm copper cable for 3 pin 15 Amps socket outlet on independent board, including 2.5 Sqmm PVC insulated unsheathed continuous earth wire and connecting to common earth dolly.
Supply and Fixing in replacement switch piano type 6 Amps one way 230 volts AC complete all as specified and as directed
Supply and Fixing in rteplacement socket outlet 5 pin, 6 Amps flush type 230 volts AC complete all as specified and as directed
Supply and Fixing in replacement switch piano 16 Amps type one way 230 volts AC complete all as specified and as directed
Supply and Fixing in replacement socket outlet 6 pin 6/16 Amps multi purpose flush type 230 volts AC complete all as specified and as directed
Supply and fixing in replacement PVC/polycarbonate ceiling rose 65X50 mm two to three terminals complete all as specified.
Material and labour in replacement PVC/polycarbonate lamp holder insulated body with back plate batten/angle type for batten fitting complete all as specified.
Supply and Fixing in replacement fan regulator, electronic step type heavy duty 230 volts complete all as specified and as directed.
Supply & Fix Ultra modern recess mounting luminaire with high performonging LEDs suitable for mounting with armstrong/grid ceiling of site 2' X 2' 34W and connecting up with three core copper conductor cable of suitable size including taking down old, omplete all as specified and as directed.
Supply and fixing in replacement of Endura Linear NEO wall mounted LED Batten 20 Watt LED, extruded aluminium heat sink provided for efficient heat dissipation and integrated electronic driver complete all as specified and directed.
Supply and fixing in replacement LED Bulbs white /warm white (as per demand) in colour of 15 Watt,B-22 base Cap, complete all as specified and directed.
Dimantling and taking out ceiling fan 230 volts 1200/1400mm sweep any make cutting the old burnt winding rewinding with new super enamelled copper wire as existing guage including insertion of insulating papers threading and insulating with insulating warnish, lathe work, replacement of 2.25/3.15 MFD capacitor, replacement of MS split clamp 02 nos with rubber reel complete all as specified and as directed.
Supply and fixing in replacement of ball bearing of size 6200 to 6204 suitable for ceiling fan 1200/1400mm sweep.
Servicing of Air conditioning Unit/Water cooler unit/Refrigerator/Deep freezer of any capacity complete with chemical solution to condenser & cooling coil, cleaning of entire elements of AC, oiling/greasing to motor, including tracing out the leaking of condenser/evaporator filling the holes by using gas welding, complete with refilling of refrigerant R12/R11/R134a(whichever is applicable) etc complete all as specified and as directed.
Servicing of Desert cooler by repair and replacement of Fan motor,submersible pump,with grass wood wool cooling pads of suitable size to fit in desert cooler for all requisite sides complete all as specified and as directed.
Supply and fixing in replacement of sheet metal enclosure MCB distribution board SPN 12 way 230 V, 50 Hz double door with neutral, Earthing bar and din rail, complete all as specified and directed.
Supply and fixing in replacement of sheet metal enclosure MCB distribution board SPN 8 way 230 V, 50 Hz double door with neutral, Earthing bar and din rail, complete all as specified and directed.
Supply and fixing in replacement of sheet metal enclosure MCB distribution board SPN 4 way 230 V, 50 Hz double door with neutral, Earthing bar and din rail, complete all as specified and directed.
Supply and fixing in replacement of sheet metal enclosure MCB distribution board TPN 4 way 230 V, 50 Hz double door with neutral, Earthing bar and din rail, complete all as specified and directed.
Supply and fixing in replacement of MCB single pole 6 to 30 Amps, 10KA, 230 volts 'C' series, complete all as specified and directed.
Supply and fixing in replacement of MCB SPN 40 to 63 Amps, 10KA, 230 volts 'C' series, complete all as specified and directed.
Supply and fixing in replacement of MCB TPN 63 Amps, 10KA, 230 volts 'C' series, complete all as specified and directed.
Supply and fixing in replacement of Geyser heating element 1.5/2.0 KW, complete all as specified and directed.
Supply and fixing in replacement of Geyser Thermostat for 25 Ltrs, complete all as specified and directed.
Supply and fixing in replacement of Geyser Assembly 6/9 holes for 25 Ltrs, complete all as specified and directed.
Supply and fixing in replacement of Geyser PVC connection Pipe Hot and Cold 600mm, complete all as specified and directed.
Deduction to be made from BOQ for schedule of credit (Sch 'A' Part - II) Amount of ₹ 14952.50 during AOC Note:- Tenderers shall not quote for this Schedule
NATIONAL TRADING COMPANY
MEHTA OM PARKASH
arneesh kumar suri
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .