COMPREHENSIVE MAINTENANCE CONTRACT (CMC) FOR TEZU UNDER GE LEKHAPANI

Amount

Dismantling of plain or corrugated steel sheeting any guage, thickness including Nanital or similar pattern roof coverings complete all as directed.

Dismantling of wrought cast iron or mild steel work of any description not otherwise provided for complete all as directed.

Dismantling of wall and ceiling boards (fiber, pulp, insulation etc.) or insulation boards/slabs/blankets, any thickness, including frames and cover fillets complete all as directed.

Dismantling of timber scantlings as in unframed timber work 40 sq.cm and over in section, in any position complete all as directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars etc. but excluding ashlar facings, dressed stone work & precast concrete articles complete all as directed.

Demolition of unreinforced cement concrete in ground floors and pavings n. exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Demolition of reinforced cement contrete of any description & in any position not otherwise specifically provided for complete all as specified & directed.

Taking down chowkat or frame with shutters (without taking off shutters from the frame) not exceeding 1.5 sqm each and making good to disturbed surfaces complete all as directed.

Taking down chowkat or frame with shutters (without taking off shutters from the frame) exceeding 1.5 sqm but not exceeding 4.0sqm each and making good to disturbed surfaces complete all as directed.

Taking down shutters of any description exc 1.00 sqm but n.exc 2.00 sqm each complete all as directed.

M&L for brick work with using sub class old size 'B' bricks, straight or curved on plan to any radius, built in cement mortar 1:4 as in half brick thick walls complete as specified and directed.

M & L for brick work with using subclass “B” Old size bricks, straight or curved on plan,exceeding 6 m mean radius, built in CM 1:6 complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified & directed.

M&L for rendering 10.mm thick plaster in cm 1:6 on fair faces of brick work or concrete surfaces including finishing top even and smooth without using extra cement complete all as specified & directed.

M&L Prepration of newly plastered surface of wall and applying two coat of cement base paint over a coat of primer including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified and as directed.

M & L for preparation of new plastered surfaces of wall and applying two coats of distemper oil emulsion over a coat of primer including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified and as directed.

M&L for preparation of old plastered surfaces of walls,by washing,rubbing down and stopping of distempered and painted surfaces etc.and applying one coat of distemper oil emulsion including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified and as directed.

M&L for preparation of old painted or plastered surfaces of walls etc by washing, rubbing down and applying one coat of cement base paint including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified and as directed.

M&L for preparation of old plastered surfaces of wall and applying one coat of white wash including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified and as directed.

M&L for preparation of old plastered surfaces of ceiling and applying one coat of white wash including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified and as directed.

M&L preparing old wood & wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint (1st quality) including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified and as directed.

M&L for preparation of old steel surfaces of any description, over 10 cm width or girth, not otherwise described and evenly applying one coat of synthetic enamel paint (1st quality) including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified and as directed.

S&F rolled mild steel as in main and cross beams, hips and jack rafters, purlins where connected to commen rafters and running rails fixed with angle cleat or other connecting plates complete all as specified and as directed.

S&F framed work such as griils, grating, angle iron door frames etc., with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, laders, framed balusters, walk ways, railings frame work of water tanks and similar work conforming to Fe-290. Gde E-165 complete all as specified & as directed.

M&L for preparation of new or previously steel surfaces of any description, over 10 cm width or girth, not otherwise described and evenly applying two coats of synthetic enamel paint (1st quality) over a coat of red oxide primer including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified and as directed.

M&L for pre-painted hot dip aluminium-zinc alloy metallic coated corrugated steel sheet, any pattern corresponding to IS15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ 150, 0.50mm thick of an approved colour and having yield strength of 550 MPa as in roof covering fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor complete all as specified and as directed

M&L for hot dip aluminium-zinc alloy metallic coated plain steel sheet as per IS 15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ 150, 0.50mm thick of an approved colour and having yield strength of 550MPa as in ridge/valley/gutter/eaves boardings fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor complete all as specified and as directed.

Providing and fixing inter locking metal grid (snap grid for false ceiling) of size 605mm x 605mm in true horizonatal level, hot dipped galvanised steel sections consisting of main “T” runner with suitably spaced joints to get required length and size 24mm x 38mm made from 0.30mm thick (Min) sheet spaced at 1200mm centre to centre and cross “T” of size 24mm x 28mm made of 0.30mm thick (Min) sheet, 1200mm long spaced between main “T” at 600mm centre to centre to form a grid of 1200mm x 600mm and secondary cross “T” of length 600mm and size 24mm x 28mm made of 0.30mm thick (Min) sheet to be interlocked at middle of the 1200mm x 600mm panel to form grids of 600mm x 600mm and wall angle of size 24mm x 24mm x 0.4mm. Main “T” runner to be suspended from purlins or truss member using 2 to 3 mm dia GI wire, 1200mm x 600mm centre to centre all complete for all heights as per specifications and as directed.

M & L for 4 mm thick high pressure, oceanic pre-primed, self embossed, non asbestos fibre cement decorative board, water, termite and fire resistant for insulation ad acoustic purpose to be placed in grid system hold down clips with provision of high fixtures, air conditioning, diffuser and ducts, sprinkler, smoke detector etc, complete all as per manufacturer instructions and as directed.

M&L for 2nd class hard wood scantling, clean swan, timber fixed as in unframed work complete all as specified and as directed.

S&F 35 mm thick, flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides & both face is covered with decorative face veneer with lipping / frame to match & fixed to chowkats complete all as specified & directed.

S&F 35 mm thick, hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) fitted to chowkats complete all as specified & directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete fixed to frames all as specified and as directed.

S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, complete all as specified and as directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified & directed.

S&F 100mm size butt hinges, medium weight, cold rolled mild steel & fixed complete all as specified & as directed.

S&F 200 mm size, aluminium anodised , barrel tower bolts of extruded section & fixed complete all as specified and as directed.

S&F 150mm size aluminium handles, cast type, anodized and fixed complete all as specified & as directed.

S&F 300mm length of bolt, aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified & as directed.

M&L for preparing new wood & wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (1st quality) over a coat of pink primer including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description), from wooden frames, glazed with putty or fixed with beads complete all as specified and as directed.

S&F 2.5mm to 3mm thick PVC transparent/frosted window panes ordinary quality and glazing with oil putty / wooden beads as required in squares n exc 0.5sq. m in each pane complete all as specified and as directed

S&F in repair stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified & directed.

Taking down steel door from its position and repair the same including thorughtining alignment properly including welding additional hinges locking arrangement etc and erecting the same back in position after applying one coat of synthetic enamel paint in area of door n.exc 4.00 Sqm each leaf all as directed (Note : Necessary MS sections such as angle, pipe, bars, flats , hinges shall be measured and paid seperately by weight ) complete all as directed.

S & F for aluminum powder coated (powder coated of required colour) three track sliding windows frame top & sides of size 92 x 31.75 x 1.50mm (section No 20831) bottom of size 92 x 31.72 x 1.50mm (Soction of 20832) and shutter top & bottom of size 40 x 18 x 1.55 (section 20738) and lock side shutter frame of size 40 x 15 x 1.45mm (Section 20737) with rubber gasket, beading and locking arrangement including making good to the disturbed portion complete including stainless steel wire mesh 0.36mm nominal dia with 1.40mm average aperture and fixed with stainless steel wire staples and fixing 5mm thick glass with necessary rubber beading gasket etc complete all as specified

M&L for 75 mm thick Cement concrete type C-2, 1:3:6 (using 40 mm graded stone aggregates) as in plinth protection etc, finishing cement concrete surface even and smooth with out using extra cement including making joints with hot bitumastic mix in proportion of bitumen and sand 1:2 complete as specified & directed.

M&L for 40mm thick PCC ,type B1 (1:2:4) (using 20mm graded crushed stone aggregates) as in floors, finished even and smooth, with using extra cement complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. including brushing neat cement slurry with 3.0 kg of cement per sq. metre complete all as directed.

M&L for coloured non skid joint free ceramic tiles of 7mm to 8mm thick area of each tile exceeding 0.18 Sqm but not exceeding 0.38 sqm in floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes complete all as specified & directed.

S&F in repair curtain rods, anodised aluminium alloy, 20 mm dia chromium plated with fixing brackets, stops, rollers etc complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all complete.

M&L for glazed coloured ceramic tiles as in vertical surface of size 450x350 x 7mm /350x250x7mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles laid over & including 10 mm thick rendering as in backing wall plaster in cement mortar (1:4) complete all as specified & directed.

M&L for coloured non skid joint free ceramic tiles of 7mm to 8mm thick area of each tile n.exceeding 0.18 Sqm in floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes complete all as specified & directed.

M&L for Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and as directed.

S&F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, Wshers and wastes; including bedding in cement mortar on to dwarf wall or including foxing cantilever brackets and connecting union to pipe, overall size 495x420mm bowl size 410x330x160mm complete all as specified and as directed.

Taking up or down steel water tubing and connections, including cleaning for re-fixing or removal from site, for bore of pipes 20mm dia complete all as specified and directed.

Taking up or down steel water tubing and connections, including cleaning for refixing or removal from site, for bore of pipes 15mm dia complete all as specified and directed.

S&F 20mm dia bore of pipes, medium grade, galvanised iron, with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified & directed.

S&F 15mm dia bore of pipes, medium grade, galvanised iron, with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified & directed.

S&F in repairs, fancy type 15mm dia long body Bib taps cast copper alloy, chromium plated screwed down to iron pipe or for brass ferrule & fixed complete all as specified & directed.

S&F in repairs, fancy type15mm dia pillar taps, cast copper alloy with capstan heads, chromium plated , screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly nuts, screwed for iron pipe & fixed complete all as specified & directed.

S&F in repair 15mm bore dia stop valve/angle valves, cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified & directed.

S&F in repairs 15mm Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm-125gms) complete all as directed.

S&F in repair vitreous china wash down water closet, "Orissa pattern, size, 580x440mm white, with integral foot rest (excluding flushing cistern and flush pipe) but including provision of cement concrete bedding complete all as specified & directed.

S&F in repair vitreous china wash down water closet pan (pedestal pattern), white including connection to drain (or outgoing pipe and to flushing pipe antisyphonage pipe etc with plastic water closet seat, black closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete fixed in repair all as specified & directed.

S&F in repair Single piece vitreous China suite european water closet and cistern, white colour, with UF seat cover with fittings complete all as specified and as directed

S&F Wash basins white, vitreous China, flat back, size 580x450mm, excluding taps, waste, chain and plug and porcelain stopper but including brackets fixed to wall complete all as specified & directed.

S&F Wash basins white, vitreous China, flat back, size 580x450mm, with padestal excluding taps, waste, chain and plug and porcelain stopper but including brackets fixed complete all as specified & directed.

S&F Vitreous China urinal Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) incl Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms)

S&F in repair Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) incl Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms)

S&F hand Shower (Health Faucet) with 1 Meter Long Easy Flex Tube in Chrome Finish and Wall Hook with N.R.V (Back Flow Preventer) with clamp complete all as specified and as directed.

S&F Toilet paper holder of of brass, chromium plated or stainless steel fixed to walls with chromium plated (CP) brass screws all as specifeid

Supply and fixing in repairs 6/9 litres capacity, dual flush PVC valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and suitable flush pipe PVC 32mm dia complete all as specified and directed.

S&F in repair PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified & directed.

M&L 75mm dia PVC (SWR) floor trap/nahani trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F in repair 32mm waste coupling of PTMT (half or full threaded) (minimum weight 40mm-60 gms) fixed in repair complete all as specified and as directed.

S&F in repair 20 mm dia tubular towel rail 20mm dia, D type, brass chromium plated, 60cm long between flanges etc complete all as specified and as directed.

S&F in repair brass chromium plated shower roses 125 mm size wirh arm with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed.

S&F 32 mm waste pipes of 900 mm lomg as in waste water pipes complete fixed in repair all as specified & directed.

Dismantling water tanks exc 250ltr but not exceeding 500ltr capacity complete all as specified and as directed.

Dismantling water tanks exc 500ltr but not exceeding 1000ltr capacity complete all as specified and as directed.

S&F rotational moulded polyethylene water storage tanks of 500 ltr capacity,(cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part-I & as directed.

S&F rotational moulded polyethylene water storage tanks of 1000 ltr capacity,(cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part-I & as directed.

S&F in repair 20mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball, screwed for iron pipe & fixed (Minimum weight 210 gms) complete all as specified & as directed.

S&F 15mm bore dia chrome finish half turn range Basin Mixer complete all as diercted.

S&F 15 mm bore chrome finish single lever range Wall Mixer incld telephonic as in repair complete all as directed.

Material & Labour for PCC 1:3:6 type C2 (using 40mm graded crushed stone aggregate) as in foundation, filling, sub base etc complete all as specified and as directed.

M & L for Chequered cement conc tiles cast in rubber moulded glossy finish of approved colour general purpose double layer of size 25cm x 25cm x 22mm thick with mixture of white and grey cement in equal proportions and pigments set and jointed and pointed in neat cement slurryas in floor laind over and incl a layer of 15mm thick bedding of cement mortar (1:6) complete all as specified and as directed

M&L for Providing, cement concrete 1:2:4 type B1 (using 20mm graded crushed stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed.

Excavation in trenches, n.exc 1.5 Mtr wide & n.exc 1.5 Mtr depth for foundation, etc, or for shafts, wells, casspits, manholes, pierholes etc. n. exc 10 sqm on plan & n. exc 1.50m in depth and getting out in soft and loose soil complete all as specified & directed.

M&L for returning, filling in, including spreading, levelling, watering and well ramming the approved soil in layers n.exc 25cm thick complete all as specified & directed.

Removal of surplus excavated soil to a distance n. exc. 50 m and depositing where directed at a level n. exc. 1.5 m above starting point complete all as specified & directed.

Material & Labour for plain cement concrete (1:4:8), type D-2, (using 40mm graded crushed stone aggregates) in foundations, filling, sub base, mass concrete etc complete all as specified and directed.

S&F in repair PVC (SWR) pipes 110mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F in repair PVC (SWR) pipes 75mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F in repair PVC (SWR) bends 110mm dia any radius all as specified and directed.

S&F in repair PVC (SWR) bends 75mm dia any radius as in repair all as specified and directed.

S&F,in repair PVC (SWR) pipe, 160mm dia pipe, single socketed in any length with rubber ring joints, laid in trenches or in floors, wall etc complete all as specified and as directed.

Cleaning of solid/liquid mud deposited in underground sewage lines, 100/150mm dia bore of any type at any depth, between consecutive manholes, by manual rodding, through connecting manholes, getting out all foreign matter such as solid/ liquid mud etc. complete including removal & refixing of covers, complete all as specified and directed.

M&L for use & waste of form work with rough finished flat concrete surface as sofits of suspended slab such as roof slab, floor slab, landing & similar work complete all as directed.

M&L for RCC type B-1 (1:2: 4) (using 20mm graded crushed stone aggregates) as in, slab supported on walls, beams & columns in floor, foof, landings, balconies, canopies, desk slab,slab of septic tank, soak well etc & the like complete all as specified and directed

M&L for RCC type B-1 (1:2: 4) (using 20mm graded crushed stone aggregates) as in cover slab for manhole, septic tanks, soak well etc set in cement mortar (1:4) with plain fair faces incl chamfered, weathering, throating etc incl necessary use & waste form work complete all as specified and directed.

M&L TMT bars 10mm dia and over, cut to length, bent to shape required, including cracking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips.

All as per item No 104.00 above but 6 to 8 mm dia. Complete all as directed.

Taking down aluminium point wiring for light, fan, bell socket, power socket etc complete including fittings and fixtures removing from site and making good disturbed surfaces of walls, floors, etc complete all as directed.

Material and labour for providing point wiring for One light /Fan /Ex Fan point controlled by one, one way switch with using 1.5 sq.mm (nominal area), stranded copper conductor, single core PVC insulated FRLSH unsheathed cable (Maintaining Colour Code) 1100 volts grade with and including PVC casing and capping (size of casing caping as required at site but not less than 20mm) of suitable size including PVC accessories / fittings and fixtures fixed on surface with using new PVC board or sunken type pressed steel box of adequate size, terminal boxes for mounting fittings/junction boxes with and including all accessories and using 1.5 sq.mm (nominal area), stranded copper conductor, single core PVC insulated FRLSH unsheathed cable green in colour as in earth continuity conductor connected to common earth dolly and connecting upto fittings complete all as specified and directed for:- Note: The quoted rates shall be inclusive for fixing casing caping to surface with using PVC raw plugs and provision of PVC boards/terminal/junction boxes of any shape and size.

All as per Ser item No. 107.00 above but for One Bell/Buzzer point controlled by one way bell switch complete all as directed.

All as per Ser item No.107.00 above but for One socket outlet 3 or 5 Pin, 6 Amp on same board complete all as directed.

All as per Ser item No. 107.00 above but for One socket outlet 3 or 5 Pin, 6 Amp on independent board complete all as directed.

All as per Ser item No 107.00 above but with using 2.5 sqmm copper cable in and including PVC casing and capping for socket outlet 3 or 6 pin 15 Amps complete all as specified and as directed

S&F for switch paino flush type 5/6 Amps single pole one way 230 volts AC circuit complete all as specified and directed.

S&F in repairs for switch paino flush type 5 / 6 Amps single pole one way 230 volts AC circuit complete all as specified and directed.

S&F for bell push flush type 5 / 6 Amps single pole 230 Volts AC Circuit complete all as specified and directed.

S&F in repairs Bell push flush type 5/6 Amps single pole 230 Volts AC Circuit complete all as specified and directed.

S&F for socket outlet 2 in 1 3 pin 5/6 Amps flush type 230 volts AC circuit on same board complete all as specified and directed.

S&F switch socket combination 2 in 1 3/5 pin 5/6 Amps 240 volts flush type multipurpose complete all as specified and as directed.

S&Fin repairs switch socket combination 2 in 1 3/5 pin 5/6 Amps 240 volts flush type multipurpose complete all as specified and as directed.

S&F switch socket combination 2 in 1 5/6 pin 5/6 Amps and 15/16 Amps flush type 240 Volts universal complete all as specified and as directed.

S&F in repairs switch socket combination 2 in 1 5/6 pin 5/6 Amps and 15/16 Amps flush type 240 Volts universal complete all as specified and as directed.

S&F Electronic fan regulator 230 volts , step type,socket type, hum free 300 watt ISI Marked, complete all as specified and as directed.

S&Fin repairs Electronic fan regulator 230 volts , step type,socket type, hum free 300 watt ISI Marked, complete all as specified and as directed.

M&L for ceiling rose, surface Bakelite 65 x 17.50 mm of three terminals PVC/Polycarbonate, isolated body (ISI Marked) complete all as directed.

S&F PVC/polycarbonate Batten typer lamp Holder insulated body with back plate batten type suitable for batten fitting complete all as specified and directed by Engr-in-charge .

S&F call bell AC 230 Volts single pole complete all as specified and directed.

S&F in repairs modular switch 10 Amp one way 230 V AC complete all as specified and directed by Engineer-in-charge.

S&Fin repairs modular switch 20 Amp one way 230 V AC complete all as specified and directed by Engineer-in-charge.

S&F in repairs modular socket outlet 10 Amp intel multi socket for all pins 230 V AC complete all as specified and directed by Engineer-in-charge.

S&F in repiars modular socket outlet 20 Amp and 10/20 Amp heavy duty 230 V AC complete all as specified and directed by Engineer-in-charge.

Suplly and fix in repairs modular type fan step regulator, 120W - 2 module complete all as specified and directed.

S&F 3 module PVC Flush Box including white cover plate with frame for fixing of modular switeches/sockets etc. as fixed in repair complete all as specified and directed by Engineer-in-charge.

S&F 6 module PVC Flush Box including white cover plate with frame for fixing of modular switeches/sockets etc. as fixed in repair complete all as specified and directed by Engineer-in-charge.

S&F 8 module PVC Flush Box including white cover plate with frame for fixing of modular switeches/sockets etc. as fixed in repair complete all as specified and directed by Engineer-in-charge.

S&F Inverter type LED tube light batten 4 ft. 1 x 18/20 watt, 230 volts inbuilt Lithium ion battery with charging time 8 to 10 Hrs and back up time upto 4 Hrs complete with all accessories internally pre-wired and fixed to walls/ceiling with screw including connecting up with twin core flexible copper conductor cable with suitable size, complete all as specified and directed.

S&F Inverter type LED tube light batten 4 ft. 1 x 18/20 watt, 230 volts inbuilt Lithium ion battery with charging time 8 to 10 Hrs and back up time upto 4 Hrs , as fixed in repairs complete with all accessories internally pre-wired and fixed to walls/ceiling with screw including connecting up with twin core flexible copper conductor cable with suitable size, including taking down old unsv fitting complete all as specified and directed.

S&F LED tube light fitting 2 ft. 1 x 9/10 watt, 230 volts, complete with all accessories internally pre-wired and fixed to walls/ceiling with screw including connecting up with twin core flexible copper conductor cable with suitable size, complete all as specified and directed.

S&F LED tube light fitting 2 ft. 1 x 9/10 watt 230 volts , as fixed in repairs complete with all accessories internally pre-wired and fixed to walls/ceiling with screw including connecting up with twin core flexible copper conductor cable with suitable size, including taking down old unsv fitting complete all as specified and directed.

S&F PVC/polycarbonate Batten type lamp Holder insulated body with back plate batten type suitable for batten fitting as fixed in repairs complete all as specified and directed by Engr-in-charge .

S&F LED Blub 9 watt Self Ballasted Retrofit type lamp with PBT body shell and DC Diffuser CCT 6500 K as fixed in repairs complete all as specified and directed.

S&F LED Bulk head fitting 10 watt in engineering plastic housing with clear prismatic diffuser complete with all accessories internally pre-wired and fixed to walls/ceiling on PVC Box with screw including connecting up with twin core flexible copper conductor cable with suitable size, including taking down old unsv fitting complete all as specified and directed.

S&F LED building security light fitting 35W new generation energy saving and environmental friendly long life LED street light made up of pressure diecast aluminium housing with high power LED as lighting source and lens embedded PC cover having top opening seperate driver compartment with IP65 protection and impact resistance of IK07 incl mounting bracket with clamp of suitable size and connection complete incl taking down old unsv one, all as specified and directed.

M&L for providing sub main wiring with two single core 6.00 Sqmm (nominal area) PVC Insulated FRLSH unsheathed multi stranded copper conductor cable 1100 volts grade drawing through PVC casing-capping/ PVC Conduit complete as per direction including 6.00 Sqmm PVC insulated unsheathed multi stranded FRLSH single core copper conductor cable for earth wire including taking down/removing old one and making good distrubed surfaces of walls, floors, etc complete all as specified and directed. Note : (i) Three runs of single core 6.00 Sqmm multi stranded copper cable and one run of casing caping/conduit shall be measured as one run length (ii) Extra length of cable required for connection to DBs/MCBs shall deem to be included in unit rate quoted by contractor against the item (iii) Earth wire run inside the casing capping/conduit.

M&L for providing sub main wiring with two single core 4.00 Sqmm (nominal area) PVC Insulated FRLSH unsheathed multi stranded copper conductor cable 1100 volts grade drawing through PVC casing-capping/PVC Conduit as per direction complete including 4.00 Sqmm PVC insulated unsheathed multi stranded FRLSH single core copper conductor cable for earth wire including taking down/removing old one and making good distrubed surfaces of walls, floors, etc complete all as specified and directed. Note : (i) Three runs of single core 4.00 Sqmm multi stranded copper cable and one run of casing caping/ conduit shall be measured as one run length (ii) Extra length of cable required for connection to DBs/MCBs shall deem to be included in unit rate quoted by contractor against the item (iii) Earth wire run inside the casing capping/ conduit.

Supply and fix powder coated sheet metal enclosure single pole & neutral for DBs (Double door) 4 way with 200 amps rated busbar DIN channel, neutral link & earth link superline including taking down old unserviceable enclosure one complete all as specified as directed.

All as per Ser item No 144.00 above but for 8 way SPN DB complete all as directed.

S&F MCB single pole and neutral (SP&N) 25 to 32 Amp 240 volts 10 KA 'C' series suitable for new/existing DBs with all incoming/outgoing connections with proper size lugs including taking down old unserviceable one complete all as specified and directed.

S&F MCB single pole (SP) 6 to 32 Amp 240 Volts 10 KA 'C' series suitable for new/existing DBs with all incoming/outgoing connection with proper size lugs including taking down old unserviceable complete all as specified and directed.

S&F single pole and neutral enclosure with a two pin and earth plug and socket complete with one number single pole MCB 20 Amps , 240 Volts complete all as specified and as directed.

S&F PVC insulated, unsheathed, single core, multi-stranded, FRLSH copper conductor, 1100 volt grade complete for 1.5 sqmm size as fixed in repair complete all as specified and as directed.

All as per Ser item No 149.00 here-in-before but of size 2.5 sqmm.

S&F Capacitor 2.5 mfd, 415 volts suitable for ceiling fans as fixed in repair by taking out the unserviceable one all as specified and directed.

S&F Capacitor 4.0 mfd, 415 volts suitable for exhaust fans as fixed in repair by taking out the unserviceable one all as specified and directed.

M&L Over hauling and Painting of ceiling fan / exhaust fan of any sweep/make complete, in situ with synthetic enamel paint by spraying after overhauling/servicing i.e. opening of fan and cleaning ball bearing, filling grease/oil and changing of u/s cotter pin, nut, screw, check nuts and bolts as required incl. cleaning of body, blades, down rods, canopies etc and re-assembling complete all as directed.

M&L for Opening Stator/Rotar of any type /model/ make Ceiling Fan 1200mm Sweep Cleaning of Parts, replacement of Unserviceable Parts as ordered, Greasing of Moveable parts, taking out burnt coil, cleaning the segments complete and Re-winding the same with supper enameled Copper Wire of same Gauge and same Weight with Insulation Paper, Quick Varnishing and Heating as required, Re-assemble the same after repaired and Testing, complete all as specified and as directed.

All as per Item No. 154.00 above but for Exhaust fan of any sweep

Supply & fix in repair ball bearing set of ceiling/exhaust fan of any size of exactly similar as existing in fan all as directed.

Supply & fix in repair metal bush bearing for ceiling fan of any make/sweep of exactly similar as existing in fan complete as directed

Supply & fix in repair rotor shaft for Ceiling/exhaust fan of any make/sweep as directed

Supply and fixing of MS down rod 'medium grade' 15mm dia of length 0.75 mtr complete with making split holes, cut or threads at both end of pipe as required for hanging of C/fan incl. painting of rod with two coats of synthetic enamel white paint over one coat of primer all as directed

S & F in repair 'U' shape shackle clamp assembly made out of MS flat iron incl checknut, bolts, screws, washer, split pin, lock nut, rubber reel etc. suitable to the down rod pipe and connecting complete all as directed

S & F fan hook suitable for 40mm dia pipe, made out of MS flat iron of size 50 x 6mm incl suitable size of nut, bolt & washer complete all as specified & directed. Note for item No 151.00 to 161.00 :- Taking down any type of fan from site will be under contractor's own arrangement for rewinding/repair the same, removing defective parts, burnt winding carefully, cleaning & re-assembling the fan after repair incl. oiling, greasing, replacing u/s cottor pins, washer lock bolts, connector etc. & hanging/ refixing the same at site connecting up with existing electric circuit and testing complete to the satisfaction of Engineer-in-charge.

Material and labour for earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6mm buried directly in ground vertically to a depth not less than 2.25 meter below normal ground level (with top edge of earth plate not less than 1.5 meter below ground level) connected to galvanized iron earth lead wire 4mm dia, (main earthing lead ) by means of galvanized bolts, nuts and washers all as shown in electrical plate no 5 of MES Schedule Part-I (1991) with connected to earth test point & to main switch board with & including adequate quantity of charcoal dust and common salt alround earth plate & 15 mm dia GI pipe light grade for earth lead protection pipe for suitable length and GI pipe 20 mm dia light grade for watering pipe with funnel & wire mesh including necessary earth work and PCC (1: 3 : 6) type C-1 for earth pit and 40 mm thick pre-cast RCC cover in 1 : 2 : 4 type B1 with 3 Nos 8 mm dia TMT bars both ways complete all as specified & directed by Engineer-in-Charge.

M/s NARAYAN MUKHERJEE & CO

M/S D R GOPE

M/S Raju prasad