REPAIR/REPLACEMENT OF INTERNAL ELECTRIFICATION OF CONNECTED WORKS IN OTM AND MD ACCN OF ZONE-IV UNDER AGE E/M-II OF GE(SOUTH) MEERUT CANTT

Amount

Taking down carefully any type of battens or conduit point wiring with batten / conduit (light, fan, socket or power) complete including fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, pendent light fittings, MCBs / isolators, fan regulators, tube light fittings etc removing material from site and making good disturbed surfaces of walls, ceilings etc including two coats of white / colour washing / distempering etc to match the existing complete all as directed .

All as per item No 1.00 above but except conduit.

Material and labour for point wiring with 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, stranded, FRLS PVC insulated, unsheathed, copper conductor cable in existing PVC / MS concealed conduit of any size/dia complete with all accessories/fittings, brass screws, washer etc, sunk zinc coated pressed steel terminal boxes with 3mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated stranded copper conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed for One tube light/Bulb/Bell point controlled by one, one way switch 05 / 06 Amps all as specified and directed by Engr-in-Charge.

All as per serial item No 3.00 above but for One ceilling /exhaust fan point controlled by one, one way switch 05 / 06 Amps.

All as per serial item No 3.00 above but for One 3 pin, 05 / 06 Amps socket outlet point on independent board controlled by one, one way 05 / 06 Amps switch.

All as per serial item No 3.00 above but for One 3 pin, 05 / 06 Amps socket outlet point on same board controlled by one, one way 05 / 06 Amps switch.

All as per serial item No 3.00 above but for One one bell point controlled by one way switch 05/06 Amps.

All as per serial item No 3.00 above but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 15/16 Amps socket outlet point on independent board.

Material & labour for point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi stranded, FRLS PVC insulated, unsheathed copper conductor cable in and including PVC concealed conduit of 20mm dia medium grade complete with and including all PVC conduit accessories/fittings, brass screws, washers etc, sunk zinc coated pressed steel terminal boxes including all cutting/chases etc in walls, making good to walls, ceiling etc including two coats of white/colour washing/distempering etc to the disturbed surfaces to match the existing surface, 3mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated copper conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed for One Bulb /Tube light / bell point controlled by one, one way switch 05 / 06 Amps all as specified and directed by Engr-in-Charge.

All as per serial item No 9.00 above but for One ceilling fan/exhaust point controlled by one, one way switch 05 / 06 Amps.

All as per serial item No 9.00 above but for One 3 pin, 05 / 06 Amps socket outlet point on independent board controlled by one, one way 05 / 06 Amps switch.

All as per serial item No 9.00 above but for One 3 pin, 05 / 06 Amps socket outlet point on same board controlled by one, one way 05 / 06 Amps switch.

All as per serial item No 9.00 above but for one bell point controlled by one way switch 05/06 Amps.

All as per serial item No 9.00 above but for one two way point controlled by two , two way switches 05/06 Amps.

All as per serial item No 9.00 above but with 2.5 Sqmm Nominal cross sectional area copper conductor cable for one 15/16 Amps socket outlet point on independent board.

Supply and fix switch piano flush type, 05/06 Amp single pole, one way 240 volts complete all as specified and directed .

Supply and fix socket outlet 5 pin, 05/06 Amp flush type 240 volts complete all as specified and directed.

Supply and fix switch piano flush type, 15/16 Amp single pole, one way 240 volts complete all as specified and directed.

Supply and fix socket outlet 3 pin, 05/06 Amp and 3 pin 15/16 Amps (2 in 1 Multipurpose) 240 volts complete all as specified and directed .

Supply and fix switch bell push flush type, 5 Amp, 240 volts complete all as specified and directed.

Supply and fix door bell ding dong type, 240 volts AC complete all as specified and directed.

Supply and fix stepped type electronic fan regulator flush type on the existing sheet etc. AC, 230 volts, ISI marked with and including connector complete all as specified and directed .

Supply and fix lamp holder (Angular/Straight), insulated body, with back plate for batten fitting all as specified and directed.

Supply and fix of ceiling rose, 3 terminal PVC polycarbonate isolated body complete all as specified & directed .

Supply & fixing switch piano flush type, 5/6 Amps single pole, two way 240 volts complete all as specified & directed.

Supply and fix decorative LED Tube light fitting 1x20 Watt , with opal diffuser, environmental friendly, energy efficient MS batten with retrofit T8 polycarbonate tube-01 No having single side connection complete with all accessories and fixing material all as specified and directed by Engr-in-Charge. Make:- Havells Model No- PHOTONULTRAE2.01213T8SSTL20WLED865SPC+ STREAKT8UPT01X22WSSBSWH OR equivalent in Crompton/ WIPRO/Surya

Supply and fix LED lamp 9/10 watt of make:- Havells, Model- LED ADORE 9 W B22 or equivalent in Phillips/ Crompton/Surya

Supplying and fixing LED tube light fitting 9/10 watt surface mounted,with extruded polycarbonate , integrated lamp & driver , with opal diffuser and decorative end plates.complete with acessories all as specified and directed . Make Havells Cat Part No LUMELINEBS9WLED865SPCWH or equivalent in CROMPTON/ Surya/Wipro

Supply and fixing in replacement of wall mounted polycarbonate fancy light suitable for 10 watt LED bulb and including 9/10 watt LED bulb complete all as specified & directed. Make - Phillips Model No - Comet 30575 or equivalent in Havells/C&S/Bajaj

Supply and fixing LED security light fitting 1x45 Watt luminaries with pressure die cast aluminium housing comprising high power with lens embedded PC cover with LED driver , IP-66 Protection and IK-07 Impact resistance complete IP 65 protection. : Make:- Havells Model No- ENDURA PEARL NEO or equivalent in Crompton / Phillips/SURYA

Supply and fixing LED security light fitting 1x25 Watt luminaries with pressure die cast aluminium housing comprising high power with PC cover with LED driver , IP-66 Protection and IK-07 Impact resistance complete IP 65 protection. : Make:- Havells Model no- ENDURA PEARL or equivalent in Crompton / Bajaj / Phillips.

Supply and fix in repair security light brackets of 32 mm dia GI pipe medium grade upto 0.6 mtr long bend to shape at 100-120 degree including flat iron clamps and suitable nuts and bolts grouted in wall including all material required for fitting, including matching the surface with existing complete all as specified and directed .

Supplying and fixing recess mounting LED 60cmx60cm luminaire 34/36 W CRCA powder coating housing with anti-glare diffuser new deep back lit panel metallic frame including all acessories all as specified and directed . Make-Havells Model No- PLUTO NEO PANELS 2X2 or equIvalent in Crompton/ Phillips/Surya

Supplying and fixing LED bulk head light fitting wall mounted with back lit LED 10 watt, IP-66,complete with all acessories complete all as specified and directed Make- Havells, Model HEXA 10 W or equivalent in Phillips/ Crompton/Wipro

Supply and fix in repair round surafces mounted led down light 10 watts white powder coated poycarbonate decorative housing and pressure die cast heat sink complete all as speciied and directed. Make Havells Model INTEGRA NEO or equivalent in Crompton/Bajaj/ Surya

Supply and fix LED tube rod 1x20 watt suitable for MS batten with retrofit T8 polycarbonate tube with single side connection, complete with all accessories including making connection and alteration in wiring as required complete all as specified and directed Make:- Havells Model No - PHOTONULTRAE2.01213T8SSTL20WLED865SPC or equivalent in cropmton/Philips/Wipro

Supply and fix LED tube rod 1x20 watt suitable for MS batten with retrofit T8 polycarbonate tube with double side connection, complete with all accessories including making connection and alteration in wiring as required all as specified and directed.

Supply and fix in repair LED PL-L lamp , 4 pin , 18watt, suitable for installation in existing 4 pin lamp holder Make:-Havells Cat No PHOTON ULTRAPLL419TL18WLED865SPC or equivalent in Phillips / Bajaj / Crompton

Supply and fix in repair LED PL-L lamp , 9 watt, suitable for installation in existing lamp holder Make:-Havells Cat No PHOTON ULTRA or equivalent in Phillips / Bajaj / Crompton

Supply and fixing in repair LED POST TOP LANTERN 25 W , IP -65 including all accessories for fixing complete all as specified and directed by Engineer-in-Charge. Make -Havells , Model No- RUBY (CLEAR) or equivalent in /Bajaj/Philips/Compton

Supply and fixing in repair LED POST TOP LANTERN 35 W ,IP-65 including all accessories for fixing complete all as specified and directed by Engineer-in-Charge. Make -Havells , Model No- RUBY (CLEAR) or equivalent in /Bajaj/Philips/Compton

Taking down carefully unserviceable sub main wiring of any size and type, removing material from site making good the disturbed surfaces of walls, ceilings etc including two coats of white / colour washing / distempering etc to match the existing complete all as specified and directed by Engineer - in - Charge.

Material and labour for sub main wiring FRLS with 2x6 Sqmm nominal cross sectional area (two single core cable of 6 Sqmm for Phase and neutral + o1 single core cable of 6.0 Sqmm for earth wire), 1100 Volts grade, multi stranded, PVC insulated, unsheathed, copper conductor cable with and including continuous earth wire of size 6.0 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC concealed conduit of 25 mm dia, medium grade with all conduit accessories / fittings, brass screws, washers etc and connected to common earth dully including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing complete all as specified & directed (Note : One meter of conduit along with 2x6.00 sqmm wire and one 6.00 sqmm earth wire shall be measured as one RM length.)

All as per item No 43.00 above, but by using two single core cable of 4 Sqmm for Phase and neutral + 1 single core cable of 4 Sqmm for earth wire. (Note : One meter of conduit along with 2x4.00 sqmm wire and one 4.00 sqmm earth wire shall be measured as one RM length.)

All as item No 43.00 above, but by using two single core cable of 2.5 Sqmm for Phase and neutral + 1 single core cable of 2.5 Sqmm for earth wire. (Note : One meter of conduit along with 2x2.5.00 sqmm wire and one 2.5 sqmm earth wire shall be measured as one RM length.)

All as item No 43.00 above, but by using two single core cable of 10 Sqmm for Phase and neutral + 1 single core cable of 10 Sqmm for earth wire. (Note : One meter of conduit along with 2x10.00 sqmm wire and one 10.00 sqmm earth wire shall be measured as one RM length.)

Material and labour for sub main wiring with 4x10 Sqmm nominal cross sectional area (four single core cable of 10 Sqmm for Phase and neutral + 1 single core cable of 10 Sqmm for earth wire), 1100 Volts grade, stranded, FRLS PVC insulated, unsheathed, copper conductor cable , single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC concealed conduit of suitable size, medium grade or more with all conduit accessories / fittings, brass screws, washers etc and connected to common earth dully including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing complete all as specified & directed.(Note : One meter of conduit along with 4x10.00 sqmm wire and one 10.00 sqmm earth wire shall be measured as one RM length.)

Taking down carefully unserviceable distribution board of any capacity including wooden board and making good the disturbed surfaces of walls, etc including two coats of white / colour washing / distempering etc to match the existing complete all as directed by Engineer - in - Charge.

Supply and fixing sheet metal enclosure double door, single pole and neutral, AC 240 volts, 8 way with 200 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces complete all as directed .

All as per item No 49.00 above but of size 12 way SPN.

All as per item No 49..00 above but of size 4 way SPN.

Supply and fixing sheet metal enclosure, triple pole and neutral AC 415 volts, 04 way with 200 Amps rated copper bus bar and IP - 43 & IK 09 protection including four pole MCB 100 Amps with metal double door and flush to wall including all cutting etc on wall and making good including two coats of white / colour washing / distempering etc to match the existing disturbed surfaces complete all as specified and directed

Supply and fixing vertical loadline sheet metal enclosure double door, Triple pole and neutral (TP&N vertical loadline) AC 415 volts, 04 way with 200 Amps rated copper bus bar and IP - 43 & IK 09 protection with the inbuilt provison for fixing of 1 No MCCB of XT1160 frame suitable upto 160 Amp and 12 Nos MCB'S inside of DB including 100 Amps ,18 KA 4 pole MCCB with metal door and flush to wall including grouting and cutting in existing wall and making good disturbed surface with two coats of white / colour washing / distempering etc to match the existing one complete all as specified and directed

Supply and fixing vertical loadline sheet metal enclosure double door, triple pole and neutral (TP&N vertical loadline) AC 415 volts, 04 way with 200 Amps rated copper bus bar and IP - 43 & IK 09 protection, with the inbuilt provison for fixing of 1 No MCCB suitable up to 250 Amps, 25 KA of frame 2 as incomer and 12 Nos MCB'S inside of DB (both DB & MCCB will be of same Make) with metal door and flush to wall including grouting and cutting in existing wall and making good disturbed surface with two coats of white / colour washing / distempering etc to match the existing one complete all as specified and directed .

Supply and fixing MCB, SP, AC, 240 volts "B" series capacity of 06 to 40 Amps, 10kA and making connections complete all as specified & directed.

Supply & fixing MCB, DP (Double Pole), AC, 240 volts, B series capacity 40 Amps to 63 Amps 10kA and making connections complete all as specified & directed.

Supply & fix MCB 4 Pole 'C' series 100 amps capacity AC 415 V, 10kA complete all as specified and directed .

Supply & fix MCB 4 Pole 'C' series 63 amps capacity AC 415 V, 10kA complete all as specified and directed .

Material and labour for MCCB 4 pole 200 A 25 KA fixing in sheet metal enclosure on wall 415 volts , 50 Hz ,using thimble/lugsproperly, aslo including all nuts bolts required for fixing all as specified and directed by Engineer - in - Charge.

Material and labour for MCCB 4 pole 160 A 18 KA of XT1 160 frame fixing in sheet metal enclosure on wall , 415 volts , 50 Hz using thimble/lugs properly aslo including all nuts bolts required for fixing complete all as specified and directed.

Material and labour for MCCB 4 pole 63 A to 100 Amps 18 KA of XT1 160 frame as per site requirement fixing in sheet metal enclosure on wall , 415 volts , 50 Hz , using thimble/lugs properly aslo including all nuts bolts required for fixing complete all as specified and directed.

Supply & fixing in repair industrial type SPN enclosure with a two pin and earth plug and socket complete with and including 32 Amps MCB, single pole, AC 240 volts and flush to wall including all cuttings & chases etc on wall and making good including two coats of white / colour washing / distempering etc to match the existing disturbed surfaces complete all as directed .

Material & labour for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with GI wire 04mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No.3 of SSR part I connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 150mm center to center both way with suitable lifting handle and pit / chamber in PCC 1:3:6 type C1 , Angle iron 40x40x5mm frame for pit cover including testing on completion complete all as specified and directed.

Taking down carefully under ground cable of any size and making good to disturbed surface as per existing complete all as specified and directed.

Supply, laying commissioning, testing of XLPE under ground LT cable 1100 volts grade of size 25 Sqmm 3.5 core armoured, PVC sheathed with aluminium conductor heavy duty laid in trenches, fixing on wall, crossing under road through protection pipe etc complete all as specified and directed.

All as per item No 65.00 but 16 Sqmm 4.0 core

All as per item N 65.00above but 16 Sqmm 2 core

All as per item No 65 .00 above but 10 Sqmm 2 core

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 M depth in soft / loose soil and geting out complete all as specified and directed.

Material and labour for sand cushioning with dry fine sand including filling, spreading, levelling in layers in cable trench with approved quality of sand for protection of under ground cable complete all as specified and directed.

Material and labour for contineous fly ash brick as in cable protection with width equal to the length of the brick of whole sub class 'B' bricks laid on edge complete all as specified and directed.

Supply laying and fixing 50 mm bore galvanised steel tubes with all fittings, light grade, laid in trenches for cable protection complete all as specified and directed.

All as per item No 72.00 above but of size 40 mm in dia.

Returning, filling in, including spreading, leveling, watering and well ramming in layers n. exc. 25 cm thick in soft / loose soil complete all as specified and directed.

Removing surplus excavated materials n.exc. 50 Mtr and depositing where directed at a level n. exc. 1.5 Mtr above the starting point complete all as specified and directed.

Supply & fixing in replacement of modular switch one way 06 Amps,1 module, 240 volts complete all as specified & directed of make Simon & Indoasian both or equivalent in Legarnd/ Havells if those are Suitable to fix in sheet of make Simon and Indoasian.

Supply & fixing in replacement of modular switch one way 16 Amps,1 module, 240 volts complete all as specified & directed of of make Simon & Indoasian both or equivalent in Legarnd/ Havells if those are Suitable to fix in sheet of make Simon and Indoasian.

Supply & fixing in replacement of modular socket one way 6 Amps,2/3 pin combined ,2 module, 240 volts complete all as specified & directed of make Simon & Indoasian both as per site requirement or equivalent in Legarnd/ Havells if those are suitable to fix in sheet of make Simon and Indoasian.

Supply & fixing in replacement of modular socket one way 6/16 Amps,2/3 pin combined ,2 module, 240 volts complete all as specified & directed of make Simon & Indoasian both as per site requirement or equivalent in Legarnd/ Havells if those are suitable to fix in sheet of make Simon and Indoasian.

Supply & fixing in replacement of modular bell push 6A, (1 or 2 module as per site), 240 volts complete all as specified & directed of make Simon & Indoasian both as per site requirement or equivalent in Legarnd/ Havells if those are Suitable to fix in sheet of Make Simon Indoasian.

Supply & fixing in replacement of modular fan step regulator 2 Module complete all as specified & directed Simon Indoasian as per site requirement or equivalent in Legarnd/ Havells if those are Suitable to fix in sheet of make Simon and Indoasian.

Supply & fixing in replacement of modular switch two way 06 Amps,1 module, 240 volts complete all as specified & directed of make Simon & Indoasian both as per site requirement or equvilent in Legarnd/ Havells if those are Suitable to fix in sheet of make Simon and Indoasian.

Supply & fixing in replacement of modular white cover plate with frame,3 module for 6 / 16 Amps Switches And Sockets , 240 volts complete all as specified & directed of make Simon & Indoasian both as per site rquirement or equvilent in Legarnd/ Havells

Supply & fixing in replacement of modular white cover plate with frame,4 module , 240 volts complete all as specified & directed of make Simon & Indoasian both or equvilent in Legarnd/ Havells if those are suitable to fix in sheet of make Simon and Indoasian.

Supply & fixing in replacement of modular white cover plate with frame,6 module, 240 volts complete all as specified & directed of make Simon & Indoasian both or equvilent in Legarnd/ Havells if those are suitable to fix in sheet of Make:- Simon and Indoasian.

Supply & fixing in replacement of modular white cover plate with frame,8 module, 240 volts complete all as specified & directed of make Simon & Indoasian both or equvilent in Legarnd/ Havells if those are Suitable to fix in sheet of make Simon and Indoasian.

Supply & fixing in replacement of modular white cover plate with frame,12 or more Module Required at site module, 240 volts complete all as specified & directed of make Simon & Indoasian both or equvilent in Legarnd/ Havells if those are Suitable to fix in sheet of make Simon and Indoasian.

Supply & fixing in repair three phase energy meter current rating 10-60A, 240x3V, 50Hz, class I, tamper proof with LCD display & Backlit including polycarbonate transperent box of suitable size for housing the meter all as specified and directed. complete all as specified & directed including dismantling the existing old meters, note down old meter reading & depositing to store yard and making good the disturbed surfaces to match the existing complete all as specified and directed.

Supply & fixing in repair Single phase energy meter current rating 10-30A, 240x3V, 50Hz, class I, Tamper proof with LCD display & Backlit including polycarbonate transperent box of suitable size for housing the meter all as specified and directed. complete all as specified & directed including dismantling the existing old meters & depositing to store yard and making good the disturbed surfaces to match the existing complete all as specified and directed.

Material and labour for fixing in repair pressed steel terminal box 75 mmx75mm, 60 mm deep with 3mm thick laminated sheet on top for mounting switch/socket/regulator incl taking out old box & making good distrubed surface to match the existing complete all as specified and directed

All as per item No 90.00 habove but size 100x100mm

All as per item No 90.00 above but size 150x75mm

All as per item No 90.00 above but size 175x100mm

All as per item No 90.00 above but size 200x150mm

Supply and fix metal flush box made of GI sheet with earth terminal for safety of standard size suitable for 6 Amp/16 Amp 3 module sheet including taking out old box, necessary cement work and making good disturbed surfces to match the existing complete all as specified and directed.

All as per item No 95.00 above but suitable for 6 module sheet complete all as specified and directe.

All as per item No 95.00 above but suitable for 8 module sheet complete all as specified and directe.

Supply only 3 mm laminated sheet suitable for 5 Amp independent board and cut in suitable size to fix 5 Amp switch and socket complete all as specified and directed.

Supply only 3 mm laminated sheet suitable for 15 Amp independent board and cut in suitable size to fix 15 Amp switch and socket complete all as specified and directed.

Supply only 3 mm laminated sheet suitable for Same board and cut for suitable no. of switches ,socket and fan regulators as per site requirement complete all as specified and directed.

Supply & Fix in repairs LED driver suitable for 25 w LED security lights as per existing Make & Model at site.

Supply & Fix in repairs LED driver suitable for 45 w LED security lights as per existing Make & Model at site.

Supply & Fix in repairs LED driver suitable for 36/42 w LED panel light fitting 2x2 as per existing Make & Model as per site requirement.

Supply and installed LED Flood light 60 watt die cast aluminium housing comprising high power including all needed accessories to fix it on wall/pole and making connection including taking down old flood light complete all as specified and directed Make:- Havells Model No- JETA QUANTO PLUS or equivalent Crompton/ Phillips/SURYA/Bajaj

vibha associates

AEGIS INTERNATIONAL