REPAIR TO KITCHEN, TOILET BATHROOM, FLOORING AND OTHER ALLIED WORKS AT ORs/JCOs MD ACCN AT GOUGH LINE AND ABC LINE OF AOC CENTRE UNDER AGE B/R (SOUTH) NO II UNDER GE (SOUTH) SECUNDERABAD

Amount

M&L for Preparatioin of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat primer. complete all as specified and as directed

M&L for Preparatioin of old steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc complete all as specified and as directed

M & L for brick work with flyash bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and as directed

Taking down plastering on brick walls etc including racking out joints, hacking for key, scrabing down with water etc. complete all as specified and as directed.

M & L for 15 mm thick rendering in Cement Mortar 1:4 on fair faces of Brick works or Concrete surfaces and finishing even and fair without using extra cement. complete all as specified and as directed Note : Roof projection/sun shade portion upto ht 7.50m incl necessary scaffolding

M&L for rendering 15mm thick in CM 1:6 on fair faces of brick or concrete surfaces finished even and fair complete all as specified and as directed.

M & L for 10 mm thick rendering in Cement Mortar 1:3 on fair faces of Brick works or Concrete surfaces in ceilings and finishing even and fair without using extra cement. complete complete all as specified and as directed. Note : Roof projection/sun shade portion upto ht 7.50m incl necessary scaffolding

M&L for two coats of cement base pain over and including a coat of cement primer complete all as specified and as directed.

M & L Preparation of newly plastered surfaces of wall and applying two coat of oil bound distemper over a coat of cement primer and altek superfine putty complete all as specified and as directed.

M&L for applying three coats of white wash on ceiling over a coat of cement primer including preparation of new plastered ceiling surfaces complete all as specified and as directed.

M&L for Preparation of plastered or unplastered old decorated surfaces and applying one coat of oil bound distemper on walls. complete complete all as specified and as directed. NOTE : Will be done by roller only, after complete removal of old loose flakes.

M&L for Preparation of plastered or unplastered old decorated surfaces and applying one coat of white wash on ceiling surfaces.complete complete all as specified and as directed. NOTE : Will be done by roller only, after complete removal of old loose flakes.

Dismantling, floor, hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the premises complete all as specified and as directed.

M&L for 25 mm thick PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) finished fair & even as in Sub base flooring complete all as specified and as directed.

M&L for glazed ceramic tiles, coloured, of size 350 x 250 x 7mm or 450 x 300x 7mm , as in vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick plaster on wall in cement mortar 1:4 complete all as specified and as directed.

M&L for Non skid ceramic coloured tiles 7-8 mm thick (Square/rectangular) area of each tile exc 0.06 and not exceeding 0.11 Sqm in floors surface set and jointed in neat cement slurry and pointed with white or colour cement to match over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.

M&L for Non skid ceramic coloured tiles 7-8 mm thick (Square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors surface set and jointed in neat cement slurry and pointed with white or colour cement to match over and including 15mm screed bed in cement mortar 1:6 complete all as specified and as directed.

Taking down chowkat with frame (without taking off shutter from the frame) n exc 1.50 Sqm each complete all as specified and as directed

All as per item above but area exc 1.5 Sqm n.exc 4 Sqm each complete all as specified and as directed

Taking down shutter of any description exc 1 Sqm & n exc 2 Sqm each complete all as specified complete all as specified and as directed.

M & L for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube supplying & fixing in opening as per specification & drawing complete all as specified and as directed

M & L for 2nd class hard wood Plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side and as gap insert for top and bottom rail; Panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC beading and joined together with solvent cement as per specification and drawing as per SSR Pt I

S&F for 35mm thick factory made plain framed panelled shutter of 2nd class HW (any Number of panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm th venered particle board with veneering on both face kiln seasoned & chemically treated complete all as specified and as directed.

S & F 35mm thick 2nd class hard wood glazed skeleton shutters open rebated and prepared to receive glass and divided into square with plain, rounded, chamfered, mitred and rebated sash bars.complete all as specified and as directed.

S & F 100mm long Stainless steel butt hinges with galvanised aluminium pin.complete all as specified and as directed.

S & F 100mm butt hinges medium weight cold rolled mild steel complete all as specified and as directed.

S & F Aluminium handle 150mm fabricated type complete all as specified and as directed.

S & F Aluminium anodised barrel tower bolts 150mm of extrded section complete all as specified and as directed.

S & F 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed

S&F 300 mm long helical door springs including roller plate complete all as specified and as directed

S& F for 150mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring. Fixed in floor complete all as specified and as directed

S & F, steel windows frame with side hung shutters including projecting type hinges with steel handle & steel peg stay, complete with glazing bars, dovetailed or welded including taking down the old window. complete all as specified and as directed

All as per item No 34 here-in-above, but without glazing bars complete all as specified and as directed

S & F, steel ventilators frame with top hung shutter including projecting type hinges with steel handle & steel peg stay, complete with glazing bars, dovetailed or welded including taking down complete all as specified & as directed.

S & F galvanized mild steel wire cloth 0.56mm nominal dia of wire with avg 1.18mm width of aperture and fixed with tinned tacks. complete all as specified & as directed.

All as per item 37 here-in above, above but fixed in repairs complete all as specified & as directed..

S &F for framed work such as grills, grating etc., with ends of bars shouldered and / or riveted, or forged into spikes; framed guard bars(for windows); barred iron doors; ladders; framed balusters; walk ways; railings; framework of watertanks and similar work cnforming to Fe 290. Gde E-165 complete all as specified and as directed

Hacking out old broken glass any description & size from wooden/steel window and removal of rubbish from work site complete all as specified and as directed

S & F 3mm th sheet glass ordinary quality and fixed with oil putty in square not exc 0.5 sqm in each pane complete all as specified and as directed.

S & F 3mm th figured glass ordinary quality and fixed with oil putty in square not exceeding 0.50 sqm in each pane complete complete all as specified and as directed.

S&F in repairs 19mm thick block board grade 2 quality, interior grade, commercial type on both faces fixed as in shutter/shelves of cup boards etc complete all as specified and as directed.

M & L for preparation of new wooden surface and applying 2 coats of synthetic enamel paint over one coat of pink primer over 10cm width or girth complete all as specified and as directed

M & L for preparation of old wooden surface and applying 2 coats of synthetic enamel paint over one coat of pink primer over 10cm width or girth complete all as specified and as directed

Taking down PVC pipes of any description any pattern incl all fittings heads, shoes bends etc complete all as specified and as directed

S&F PVC (SWR) pipes of 110mm dia single socketed in any length with rubber ring joints fixed to walls or in floors complete all as specified and as directed

S&F PVC (SWR) pipes of 75mm dia single socketed in any length with rubber ring joints fixed to walls or laid in trenches or in floors complete all as specified and as directed

S&F PVC (SWR) bends 110mm dia any radius complete all as specified and as directed

S&F PVC (SWR) bends 75mm dia any radius complete all as specified and as directed

S&F PVC (SWR) bends 110mm dia any radius with access door complete all as specified and as directed

S&F PVC (SWR) bends 75mm dia any radius with access door complete all as specified and as directed

S&F PVC (SWR) vent cowl 110mm dia complete all as specified and as directed

S&F PVC (SWR) vent cowl 75mm dia complete all as specified and as directed

S&F 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement in repair complete complete all as specified and as directed.

Demolition of cement concrete in any desscription and any position paving exc 15 cm thickness below and above ground level complete all as specified and as directed.

Taking down the plaster incl existing treatment in sunken portion , washing down with water and applying 15mm thick plastered in CM 1:4 using WPC @ 3% of the total weight of cement or as per manufacture's instructions all around incl floors and applying Shaliu Urethane BTD two coats @ 1.5 Kg/Sqm each Coat (Apply 2nd Coat after 6 Hrs) over a coat of Shali Pime WP @ 200gm/sqm and Provide 40mm GI Spout Pipe complete all as specified and as directed. (Note : WPC wii be measured and paid separately undrer relevent item)

M&L for PCC 1:4:8 type D-2 using 40 mm graded brick aggregate as in filling of sunken portion etc complete complete all as specified and as directed. .

S&F 15 mm bore tubes medium grade, galvanized with all fittings and fixed complete to walls and ceiling or laid in floors including taking down complete all as specified and as directed

S&F 20mm bore tubes medium grade, galvanized with all fittings and fixed complete to walls and ceiling or laid in floors including taking down complete all as specified and as directed

S&F 15mm bore Bib taps, cast copper alloy with crutch or butterfly handle, screweddown, screwed foriron pipe or for brass ferrule and fixedin repairs complete all as specified and as directed

S&F in repairs stop cock 15mm dia cast copper alloy with crutch or butterfly handle, screweddown, screwed foriron pipe or for brass ferrule and fixedin repairs complete all as specified and as directed

S & F in repair Vitreous china Squatting pan Orissa pattern of size 580mx440mm white with integral foot rests (excluding flushing cistern and flush pipe) complete including concrete bedding complete.all as specified & directed

S & F in repair PVC valveless syphonic action type low level flushing cistern 10 Ltr capacity with inlet, ball valve, float and handle incl brackets and flush pipe of polyethylene of low or high density PVC. 32 mm dia complete all as specified and as directed

S&F in repairs PVC connections 15mm size with PTMT nuts of length 450 mm complete all as specified and as directed

S&Fin repair WHB vitreous china (flat back or angle back type ) any size ,including cutting for pinning in ends size 550x400 mm including brackets ,out let pipe ,coupling ,connection pipe and CP piller taps complete all as specified and as directed

M & L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed

S&F 25mm Stainless steel curtain rods incl required nos of brackets complete all as sepcified and directed

S & F in repair Tubular towel rail, 20mm dia, D type, 60 cm long brass cromium plated incl all fitting & fixtures complete complete all as specified and as directed.

S&F Swivel shower of PTMT any colour for fixing in repairs with 15mm pipe. Min wt 40 gms

S&F in repairs stainless steel Kitchen plate rack of overall minimum size 600mm x 600mm and 230mm deep, with partitions for small/large plates etc made out of stainless steel 24 Gauge, fixed with rawl plug and CP steel screws complete all as specified and as directed Note : Weight of rack shall not be less than 3.80 Kg.

S & F in repairs sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed

S&F rotational moulded polyethylene water storage tanks 500 litre capacity incl (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I including dismantling and taking down existing water tank complete all as specified & as directed.

S&F 20 mm dia gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe as in repairs complete all as specified and as directed.

S&F Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weigth 455gms) 20mm bore complete all as specified and as directed

Demolition of stone slabs of any description or thickness in floors, aprons, etc laid, bedded and pointed in any mortar complete all as specified and as directed

Demolition of Concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed

M&L for 75mm thick PCC 1:3:6 type C2 (40mm graded aggregate) as in plinth protection finished even and smooth without using extra cement complete all as specified and as directed

ATUL ENTERPRISES (BID ID -3120415)

GADUSU RAMESH CONTRACTOR (BID ID -3120287)

RAGHAVENDRA CONSTRUCTIONS (BID ID -3124600)

M/S RADHIKA ENTERPRISES (BID ID -3124709)

harshraj and co (BID ID -3125526)

BEEGEE DESIGN SYSTEMS (BID ID -3125602)

CHATLAPALLY NAGENDER (BID ID -3124630)