Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹26.0 LAccepted-AOC 37 PUNJABI COLONY NEAR RAILWAY CROOSING ARYA SAMAJ ROAD MATHURA U P | MATHURA | MATHURA | UTTAR PRADESH | 281001 | L1 | Accepted-AOC THE LOWEST TENDERER | |
| 2 | L2₹28.7 L+₹2.6 L (9.99%)Rejected-Finance C 56 6 ANAND VIHAR COMMERCIAL COMPLEX MAHOLI ROAD MATHURA UP PIN 281004 | MATHURA | UTTAR PRADESH | 281004 | L2 | Rejected-Finance NOT THE LOWEST TENDERER | |
| 3 | L3₹32.2 L+₹6.1 L (23.5%)Rejected-Finance | L3 | Rejected-Finance NOT THE LOWEST TENDERER | |
| 4 | L4₹35.6 L+₹9.5 L (36.6%)Rejected-Finance | L4 | Rejected-Finance NOT THE LOWEST TENDERER | |
| 5 | L5₹45.8 L+₹19.7 L (75.7%)Rejected-Finance | L5 | Rejected-Finance NOT THE LOWEST TENDERER |
| Sl No | Description | Qty | Unit | shyam construction L1 | DEMROT ELECTRICAL WORKS L5 | Ms Kamal Kant Agarwal L2 | M/S GUPTA ENTERPRISES L4 | M/S S S CONSTRUCTION L3 |
|---|---|---|---|---|---|---|---|---|
| 1.00 | M&L for preparation of old steel surface of LT Panel board/Feeder Pillar box of any size by scrubing the existing damage paint and applying two coats of synthetic enamel paint over a coat of red oxide primer at various location in Mathura Cantt complete all as specified and as directed. | 30 | Each Job | 250 ₹7,500 | 1,500 ₹45,000 | 200 ₹6,000 Lowest | 750 ₹22,500 | 450 ₹13,500 |
| 2.00 | M&L for welding works to LT Panel/Bus Bar/Feeder pillar box for fixing/welding hinges, locking arrangement or reapir pitted area etc at site complete all as specified and as directed. | 18 | Each | 150 ₹2,700 Lowest | 1,000 ₹18,000 | 300 ₹5,400 | 200 ₹3,600 | 280 ₹5,040 |
| 3.00 | Supply and Fixing in replacement of Aluminium Bus Bar of capacity 200 Amp suitable for LT panels/ Bus bars/Feeder pillar box, rectangular shape and existing design etc including nut, bolt and washers complete all as specified and as directed. | 40 | RM | 200 ₹8,000 Lowest | 200 ₹8,000 Lowest | 600 ₹24,000 | 450 ₹18,000 | 250 ₹10,000 |
| 4.00 | Supply and Fixing in replacement of Aluminium Bus Bar of capacity 400 Amp suitable for LT panels/ Bus bars/Feeder pillar box, rectangular shape and existing design etc including nut, bolt and washers complete all as specified and as directed. | 30 | RM | 400 ₹12,000 | 300 ₹9,000 Lowest | 700 ₹21,000 | 650 ₹19,500 | 350 ₹10,500 |
| 5.00 | Supply and Fixing in replacement of Aluminium Bus Bar of capacity 600 Amp suitable for LT panels/Bus bars/Feeder pillar box, rectangular shape and existing design etc including nut, bolt and washers complete all as specified and as directed. | 25 | RM | 600 ₹15,000 | 500 ₹12,500 | 800 ₹20,000 | 850 ₹21,250 | 450 ₹11,250 Lowest |
| 6.00 | Supply, installing, commissioning and testing of bus bar chamber outdoor type, cubical type made out CRCA sheet of 3.15 mm thick dust and vermin proof and angle iron of suitable size, pedestal flame grouted in PCC 1:2:4 type B-1 (using 20mm graded stone aggregated) thimble and cable entry boxes with cable glands, bus bar should covered from all sides with front and back complete with 200 Amps (phase) & 200 Amp (Neutral) rated aluminium bus bar of suitable size, including painting with two coats synthetic enameled paint over a coat of red oxide primer consisting of the following accessories and make as per make list of tender documents:-
(a) MCCB 200 Amp 4 pole, 415 V 36 KA - 01 Nos (for incoming).
(b) Aluminium bus bar 200 Amp for three phase and 200 Amp neutral.
(c) Digital volt meter with selecter switch - 01 Nos.
(d) Digital voltmeter ameter and RYB indicator - 01 Nos.
Note :- Drawing of LT feeder Pillar shall be got approved from Engineer-in-Charge before placing order for procurement. | 1 | Each Job | 30,000 ₹30,000 | 45,000 ₹45,000 | 50,000 ₹50,000 | 35,000 ₹35,000 | 25,000 ₹25,000 Lowest |
| 7.00 | Dismantling of PCC pole/cracked pole from site complete all as specified and as directed. | 9 | Each | 100 ₹900 | 200 ₹1,800 | 100 ₹900 | 300 ₹2,700 | 80 ₹720 Lowest |
| 8.00 | Supply and erecting steel tubular swaged pole with cast iron base plate, finial taper plug, bolts, nuts & screws made out of mild steel tubing, type 410 SP -31 (9 Mtr long) including applying two coat of aluminum paint (one coat before fixing and one coat of aluminum paint after fixing) on exposed surface over a coat of red oxide primer and two coats of bituminous paint over embedded portion & the portion above coping shall be painted in alternative bands of black and yellow colour starting with white colour (each band of 30cm wide) by two coats of super enameled paint upto 1.5m height complete all as specified and as directed.
Note : Earth work and PCC in foundation shall be measured and paid separately. | 9 | Each | 10,000 ₹90,000 Lowest | 10,000 ₹90,000 Lowest | 14,000 ₹1,26,000 | 13,000 ₹1,17,000 | 14,500 ₹1,30,500 |
| 9.00 | Excavation in trenches not exceeding 1.5 mtr in depth and not exceeding 1.5 mtr wide for foundations, laying of cables etc. and getting out as in soft/loose soil complete all as specified and as directed. | 764 | Cum | 90 ₹68,760 Lowest | 110 ₹84,040 | 120 ₹91,680 | 100 ₹76,400 | 120 ₹91,680 |
| 10.00 | All as per item serial No 9.00 here-in-before but depth exc 1.5m but n exc 3.00 m complete all as specified and as directed. | 0.49 | Cum | 150 ₹72.9 | 300 ₹145.8 | 150 ₹72.9 | 250 ₹121.5 | 100 ₹48.6 Lowest |
Tender Value
₹50 L
EMD Value
₹1 L
Closing Date
1 Aug 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GARRISON ENGINEER EAST MATHURA
GE (East) Mathura
PERIODICAL REPAIR AND MAINT TO LT DISTRIBUTION NETWORK FOR ZONE C1A, C2A AREA UNDER GE (EAST) MATHURA
2025_MES_718306_1
1493/E8
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
GE EAST MATHURA
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE (East) Mathura
₹1 L
Yes
16 Sept 2025
4 Jul 2025
4 Aug 2025
4 Jul 2025
1 Aug 2025
18 Jul 2025
4 Jul 2025 - 18 Jul 2025
Amount
M&L for preparation of old steel surface of LT Panel board/Feeder Pillar box of any size by scrubing the existing damage paint and applying two coats of synthetic enamel paint over a coat of red oxide primer at various location in Mathura Cantt complete all as specified and as directed.
M&L for welding works to LT Panel/Bus Bar/Feeder pillar box for fixing/welding hinges, locking arrangement or reapir pitted area etc at site complete all as specified and as directed.
Supply and Fixing in replacement of Aluminium Bus Bar of capacity 200 Amp suitable for LT panels/ Bus bars/Feeder pillar box, rectangular shape and existing design etc including nut, bolt and washers complete all as specified and as directed.
Supply and Fixing in replacement of Aluminium Bus Bar of capacity 400 Amp suitable for LT panels/ Bus bars/Feeder pillar box, rectangular shape and existing design etc including nut, bolt and washers complete all as specified and as directed.
Supply and Fixing in replacement of Aluminium Bus Bar of capacity 600 Amp suitable for LT panels/Bus bars/Feeder pillar box, rectangular shape and existing design etc including nut, bolt and washers complete all as specified and as directed.
Dismantling of PCC pole/cracked pole from site complete all as specified and as directed.
Supply and erecting steel tubular swaged pole with cast iron base plate, finial taper plug, bolts, nuts & screws made out of mild steel tubing, type 410 SP -31 (9 Mtr long) including applying two coat of aluminum paint (one coat before fixing and one coat of aluminum paint after fixing) on exposed surface over a coat of red oxide primer and two coats of bituminous paint over embedded portion & the portion above coping shall be painted in alternative bands of black and yellow colour starting with white colour (each band of 30cm wide) by two coats of super enameled paint upto 1.5m height complete all as specified and as directed. Note : Earth work and PCC in foundation shall be measured and paid separately.
Excavation in trenches not exceeding 1.5 mtr in depth and not exceeding 1.5 mtr wide for foundations, laying of cables etc. and getting out as in soft/loose soil complete all as specified and as directed.
All as per item serial No 9.00 here-in-before but depth exc 1.5m but n exc 3.00 m complete all as specified and as directed.
M&L for cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and as directed.
M&L for cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed.
M&L for cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in coping complete all as specified and as directed.
Dismantling old unserviceable cross arms and anti climbing devices of any size from pole/structures complete all as specified and as directed.
M&L for mild steel cross arms, bracings, support, clamps and back plates fabricated from structural steel section confirming to Fe-410-O or Fe-310-O including nuts, bolts and washers welding, bending cold or hot drilling holes for bolts in any shape or size all as directed including applying two coats of aluminium paint over a coating of red oxide primer complete all as specified and as directed.
Cutting wild grass, bushes, creaper, unwanted vegetation from inside / surrounding of E/M installations, near transformers, pole structures etc including cutting creapers from barbed / cattle fencing of the installations as when directed and removing of unwanted material from installation compound and depositing complete all as specified and as directed. Note : The item shall be operated maximum three times in entire period of contract in the same installations. (Area shall measured separately each time).
M&L for carrying out calibration of Air Circuit Breaker 630 Amp to 1000 Amps, over fault relay, earth fault relay, checking of alignment of ACB isolating contacts, servicing of electronic operating mechanism including tripping and closing system of the breakers, dehydrating, decorbonising of panel,bus section & circuit section. Removing perished monoplus compound cleaning and re-insulating with LT taps wherever necessary,including repalcement of minor items like nuts,bolts,washer etc of authorised dealer/representative and refixing the ACB breaker in its original position and testing complete all as specified and as directed. Note : (i) The major spare parts shall be measured and paid separetely under relevant items of this BOQ. (ii) Calibration of ACB shall be got carried out from autorised representative of OEM.
Supply and Fixing in replacement of spring charging motor capacity 110/230 Volt suitable for ACB capacity upto 800 Amp, 4 pole, 50 HZ, AC complete all as specified and as directed.
Supply only shunt trip coil suitable for ACB capacity upto 800 Amp, 4 pole, 50 HZ, AC complete all as specified and as directed.
Supply only under voltage trip device suitable for ACB capacity upto 800 Amp, 4 pole, 50 HZ, AC complete all as specified and as directed.
Supply only Adapter type terminal suitable for ACB capacity upto 800 Amp, 4 pole, 50 HZ, AC complete all as specified and as directed.
Supply only in replacement of Spring charge indication switch suitable for ACB capacity upto 800 Amp, 4 pole, 50 HZ, AC complete all as specified and as directed.
Supply only trip indication switch suitable for ACB capacity upto 800 Amp, 4 pole, 50 HZ, AC complete all as specified and as directed.
Supply only position indication switch suitable for ACB capacity upto 800 Amp, 4 pole, 50 HZ, AC complete all as specified and as directed.
Supply only on/off push button suitable for ACB capacity upto 800 Amp, 4 pole, 50 HZ, AC complete all as specified and as directed.
Supply only on/off neutral CT suitable for ACB capacity upto 800 Amp, 4 pole, 50 HZ, AC complete all as specified and as directed.
Supply, installing, testing, commissioning of CPRI approved factory made 3 phase, 4 wire, 415 volts, out door cubicle type with IP-54 protection LT feeder pillar box double doors dust, vermin and water proof 250 Amp rating with inside panel board made out of 3.15 mm thick CRCA powder coated sheet for outer cover and 2mm thick for inside panel board with front and rear operated doors fitted with necessary hinges, making the locking arrangement including cable alley with aluminium bus bars 250 Amps rating both side internal wiring with copper wire and provn of incomming/outgoing cable way and duly mounted on 45 x 45 x 3 mm thick angle iron stand and 4 legs 750mm long each 450mm grouted in PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) and complete fixing of 2 Nos LT danger notice plates of standard size complete suitable for acommodating and including following accessories :- (a) MCCB 160 Amp, 4 Pole, 25KA adjustable thermal based released (I/C)- 01 No (b) MCCB, 160 Amp, 25 KA, 3 Pole fixed thermal and fixed magnetic (O/G)- 01 Nos (c) Cable alley with Aluminium Bus bar (RYB & N) 250 Amps raing both side of feeder Piller Box - 01 Set (LHS & RHS) (d) Three Phase LED Indicator switch RY & B Note : Drawing of LT panel shall be got approved from Engineer-in-Charge before placing order for procurement.
Supply and fixing cable tray suitable for supporting and carrying out LT cable upto transformer of size upto 240 sqmm complete all as specified and as directed.
Supply and laying electrical insulation rubber mating of size 1mx2mx25mm thick as per ISI complete all as specified and as directed.
Supply and laying electrical insulation rubber mating of size 1mx2mx20mm thick as per ISI complete all as specified and as directed.
M&L for sand cushioning to under ground cable in trenches in layers of 8 cm thick before laying the cable and 15 cm thick after laying of cable and stretching the cable and punned the sand as specified complete all as specified and as directed. Note : Punned depth shall be measured for payment.
Supply and Laying Unreinforced precast concrete cable cover class LV type 1, flat, size 250mmx150mmx40mm complete all as specified and as directed.
Returning filling in earth obtained from excavation including spreading, levelling, watering and well ramming in layers not exceeding 25 cms thick complete all as specified and as directed.
Removing surplus soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and as directed.
Supplying, laying or fixing or passing through pipe, testing and commissioning XLPE insulated, armoured heavy duty electric underground cable, aluminium conductor 1100 volt grade of following cross sectional area :- Note : Excavation & earth work shall be measured and paid separately under appropriate item(s) of this BOQ.
35 Sqmm 3.5 core.
50 Sqmm 3.5 core.
70 Sqmm 3.5 core.
95 Sqmm 3.5 core.
120 Sqmm 3.5 core.
150 Sqmm 3.5 core.
185 Sqmm 3.5 core.
240 Sqmm 3.5 core.
Supply and fix cable jointing kit for 1.1 KV grade cable for straight through joint complete with Jointing material and accessories suitable for 3.5/4 core XLPE armoured aluminium conductor cable of size 10 Sqmm to 35 Sqmm complete all as specified and as directed.
Supply and fix cable jointing kit for 1.1 KV grade cable for straight through joint complete with Jointing material and accessories suitable for 3.5/4 core XLPE armoured aluminium conductor cable of size 50 Sqmm to 95 Sqmm complete all as specified and as directed.
Supply and fix cable jointing kit for 1.1 KV grade cable for straight through joint complete with Jointing material and accessories suitable for 3.5/4 core XLPE armoured aluminium conductor cable of size 120 Sqmm to 185 Sqmm complete all as specified and as directed.
S&F of Bus bar Chamber outdoor type made out of 1.6 mm thick CRCA sheet 8 way TPN 200 Amps Bus bar rating including fixing on Wall/Pole with suitable size of clamp, Nut & Bolt or as per site requirement for fixing of outdoor site with provision of angle iron legs 45 x 45 x 3mm, 750mm long for grouted with PCC and incommer and outgoing cable connections with suitable size of lugs complete all as specified and as directed.
M&L for Earthing complete with galvanised steel earth plate electrode 60cmX60cmX6.0mm thick, buried directly in ground (earth pit not less than 2.25mtr deep below normal ground level) with top edge of the plate not than 1.5mtr below normal ground level connected to GI strip of size 32x6mm by means of bolts, nuts, check nuts and washers of galvanised iron complete earth pit of PCC M-10(Nominal mix) using 20mm graded stone aggregate, 50mm thick earth pit cover of RCC M-15 (Nominal mix) using 20mm graded stone aggregate with MS TMT reinforcement bar of 8mm dia @ 150mm centre to centre both ways, MS handle 10mm dia made to shape, PGI funnel, wire mesh and 15mm bore GI water pipe medium grade and 40mm bore medium grade GI pipe for protection of earth strip from plate to Panel/Bus bar/Electrical equiptment, common salt, charcoal dust including testing on completion complete all as specified and as directed all as shown in electrical plate No. 3 including testing on completion and making good the disturbed surfaces of wall floors etc without claiming extra cost complete. Note : GI strip beyond 7.5Mtr length from earth electrode shall be measured and paid separately.
M&L for GI strip of size 32x6mm as earth continuity conductor burried in ground or drawn in pipe or fixed to wall on saddle complete all as specified and as directed.
M&L for copper strip of size 32x6mm as earth continuity conductor burried in ground or drawn in pipe or fixed to wall on saddle complete all as specified and as directed. Note : Cost of insulating saddle for fixing of copper strip on wall/roof/floor etc shall be included in quoted rates.
M&L for copper earthing in replacement with copper earth plate electrode 90 cm X 60 cm X 5 mm buried directly in ground (earth pit not less than 3.0 mtr deep beliow ground level) with top edge of the plate not less than 2.25 mtrs below normal ground level,connecting to copper strip 32 X6 mm as earthing strip by means of bolts, nut check nut and washers protected with and including 40 mm dia medium grade GI pipe, necessary excavation and earth work, magnesium sulphate (80 Kg) ), charcoal (4 Qtl) and common salt (4 Qtl) filling, watering arrangement with 20 mm GI pipe medium grade including PCC pit with pre cast RCC (1:2:4) cover, GI funnel with test point, testing (all as shown in electrical plate No 5 and commissioning all as specified and as directed.
M&L for laying GI tubing, light grade, 80 mm bore dia as cable protection fixed on walls/poles/underpass/ceiling and laid in floor complete all as specified and as directed.
M&L for laying GI tubing, light grade, 100 mm bore dia as cable protection fixed on walls/ceiling/laid in floor complete all as specified and as directed.
Supply and fixing in replacement of MCCB 630Amp rating, 4-pole 415V, Electronic release with overload and short circuit adjustable type breaking capacity 50KA complete all as specified and as directed.
Supply and fixing in replacement of MCCB 400Amp rating, 4-pole 415V, adjustable thermal adjustable megnetic type breaking capacity 36 KA. complete all as specified and as directed.
Supply and fixing in replacement of MCCB 350 Amp rating, 4-pole 415V, adjustable thermal adjustable megnetic type breaking capacity 36 KA complete all as specified and as directed.
Supply and fixing in replacement of MCCB 250 Amp rating, 4-pole 415V, adjustable thermal adjustable megnetic type breaking capacity 36KA complete all as specified and as directed.
Supply and fixing in replacement of MCCB 200 Amp rating, 4-pole 415V, adjustable thermal adjustable megnetic type breaking capacity 36KA complete all as specified and as directed.
Supply and fixing in replacement of MCCB 160 Amp rating, 4-pole 415V, adjustable thermal adjustable megnetic type breaking capacity 16KA complete all as specified and as directed.
Supply and fixing in replacement of MCCB 100 Amp rating, 4-pole 415V, adjustable thermal adjustable megnetic type adjustable thermal adjustable megnetic type breaking capacity 16KA complete all as specified and as directed.
Supply and fixing in replacement of MCCB 63 Amp rating, 4-pole 415V, adjustable thermal adjustable megnetic type adjustable thermal adjustable megnetic type breaking capacity 16KA complete all as specified and as directed.
Supply and fixing in replacement of MCCB 250Amp rating, 3-pole 415V, adjustable thermal adjustable megnetic type breaking capacity 36KA complete all as specified and as directed.
Supply and fixing in replacement of MCCB 200Amp rating, 3-pole 415V, adjustable thermal adjustable megnetic type breaking capacity 36KA complete all as specified and as directed.
Supply and fixing in replacement of MCCB 160Amp rating, 3-pole 415V, adjustable thermal adjustable megnetic type breaking capacity 36KA complete all as specified and as directed.
Supply and fixing in replacement of MCCB 125Amp rating, 3-pole 415V, adjustable thermal adjustable megnetic type breaking capacity 16KA. complete all as specified and as directed.
Supply and fixing in replacement of MCCB 100Amp rating, 3-pole 415V, adjustable thermal adjustable megnetic type breaking capacity 16KA complete all as specified and as directed.
S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as per IS 15965: 2012 in roof covering/cladding to wall fixed with self tapping screws complete all as specified and as directed.
M&L for mild steel framed work angle iron flat, channels, etc including nut, bolts, welding drilling holes etc confirming to Fe-410-O or Fe 310-0 complete all as specified and as directed.
Supply and Fixing in replacement of spreader terminal for MCCB in LT panel/Feeder pillar box suitable for rating 80 Amp to 100 Amp ,4 pole,50 HZ,AC complete all as specified and as directed.
Supply and Fixing in replacement of spreader terminal for MCCB in LT panel/Feeder pillar box suitable for rating 125 Amp to 200 Amp ,4 pole,50 HZ,AC complete all as specified and as directed.
Supply and Fixing in replacement of spreader terminal for MCCB in LT panel/Feeder pillar box suitable for rating 200 Amp to 400 Amp ,4 pole,50 HZ,AC complete all as specified and as directed.
Supply and Fixing in replacement of spreader terminal for MCCB in LT panel/Feeder pillar box suitable for rating 500 Amp to 630 Amp ,4 pole,50 HZ,AC complete all as specified and as directed.
S&F aluminium lugs for the following sizes of cable complete all as specified and as directed :-
25 to 70 Sqmm.
95 to 120 Sqmm.
150 to 185 Sqmm
185 to 240 Sqmm
300 to 400 Sqmm
S&F Heat Shrinkale PVC sleeves suitable for XLPE LT UG cable of following sizes:-
50 Sqmm to 95 Sqmm.
120 Sqmm to 300 Sqmm.
Ms Kamal Kant Agarwal (BID ID -3379650)
M/S S S CONSTRUCTION (BID ID -3371485)
M/S GUPTA ENTERPRISES (BID ID -3371706)
DEMROT ELECTRICAL WORKS (BID ID -3371681)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .