REPAIR/MAINT TO WINDOWS, DOORS AND VANTILATOR ETC AND ALL CONNECTED ITEMS IN DOMESTIC AREA AT AF STN UTARLAI

Amount

Taking down chowkhats or frames with shutters (without taking off shutters from the frames exc 1.5 sqm but n exc 4 sqm each complete all as specified and directed.

Taking down chowkhat with shutter (without taking off shutter from the frame) n. exc 1.5 sqm all as specified.

Taking down shutters of any description n.exc 1 sqm each complete all as specified and directed

All as per item No 03 above but exc 1 Sqm and n.exc 2 Sqm each complete all as speicifed and directed.

Taking down shutters of any description exc 1 sqm but not exc 2 Sqm each, resecuring, easing, repairing,adjusting and refixing in the same opening complete all as specified.

S&F Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube,suppling and fixing in opening as per specification & drawing

S&F Fatory made solid panel PVC door shutter, 30mm thick(stiles), consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain cover PVC 'C' channel having a PVC sheet strip of 20mm width struk inside with solvent cement for stiles and plain colour PVC sheet for top rail,lock rail and bottom rail on either side & as gap insert for top rail & bottom rail, panneling of plain colour PVC sheet to be fitted in the MS frame welded /sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, suppling and fixing in the frame at site as per specification & drawing

S&F 35mm th flush shutters factory made solid core construction with block boards core and plywood face panels, commercial type on both sides (ISI marked) fixed to chowkhats complete all as specified and directed.

S&F 35mm th 2nd class Hard wood (Hollock) Kiln seasoned and chemically pressure treated glazed & skeleton shutters, open rebated at prepared to receive glass/gauze (without sash bars) edges of framing plain, chamfered, or rounded, fitted with and incl cut and mitred beads for securing glass, gauge etc, size of members of shutters as specified in SSR Pt-I, Sec-8, clause 8.24 (a) fixed to chowkhats complete all as specified and directed.

S&F 2nd class HW 35mm thick factory made Plain framed, panelled shutter (two panel) with lock rail & panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces.The size of rail & style of size as per IS: 1003 (Part I), kiln seasoned & chemically pressure treated complete all as specified and directed

S&F 25 mm thick flush shutter solid core construction with block board core and plywood face panels commercial type on both sides complete all as specified.

S&F factory made for pressed steel frames of size 125 X 60 mm with one or more rebates including necessary fixing lugs hinges, locks strike plate etc(thickness of sheet shall be 1.25mm) and with & including making good the plaster of wall in CM 1:4 and 2 coats of oil bound distamper on new surface over primer etc complete all as specified and as directed.

Supply and fixing galvanized stainless steel wire cloth 0.56mm nominal dia of wire and avg width of aperture 1.18mm complete all as specified and directed.

S & F 100 mm long medium weight, stainless steel Butt hinges complete all as specified and directed..

S & F 100 mm long medium weight, mild steel Butt hinges complete all as specified and directed.

S&F aluminum anodized barrel tower bolt of extruded section size of bolt 150mm complete all as specified and directed.

S&F aluminum handle cast type anodized 150 mm size complete all as specified and directed.

S&F for 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

M & L for applying two coat of synthetic enamel paints over one coat of pink primer on wooden surfaces over 10 cm width or girth including preparation new wooden surfaces complete all as specified and directed.

M&L two coats of synthetic enamel paint to steel surfaces of any description,over 10cm in width or girth, not otherwise described over one coat of red oxide primer including preparation of new steel surfaces complete all as specified and directed.

S & F in repair stainless steel wire cloth 0.56mm nominal dia of wire and avg width of aperture 1.18mm complete all as specified and directed.

Supply and fixing 3mm thick sheet glass ordinary quality and glazing with oil putty or beads in square not exc 0.50 sqm in each pane including hacking out old broken glass of any thickness quality or description complete all as specified and directed.

S&F sheet glass 3mm thick ground or obscured or frosted or pin headed type , on one side & glazing with oil putty in square/ rectangular n.exc 0.5 Sqm in each pane including hacking out old broken glass of any thickness quality or description complete all as specified.

M&L for Welding in repairs n.exc 6mm thick metal and n. exc 2.50cm in length to steel windows and doors of any nature and in any position complete all as specified and as directed.

M&L for one coat of synthetic enamel paint on old wooden based surfaces of any description over 10cm width or girth including preparation surfaces complete all as specified and directed.

M&L for one coat of synthetic enamel paint on old steel surfaces of any description over 10cm width or girth including preparatin of old painted steel surfaces complete all as specified and directed.

S&F in repairs 18/19 mm thick Particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work in kitchen cupbords, modular kitchen drawer and almirah shutters or other placed as specified and directed by Engr-in-charge.

S&F factory made steel windows with side hung shutters including box type hinges with steel handle, steel peg stay, locking arrangement etc complete, one shutter with glazing bars for glass penes and other shutter without glazing bars for wiremesh, dovetailed or welded including pressed steel frame of size 80X40X1.25mm thick filled with PCC and complete all as specified and shown on drawings drg No CEAA/TD/120 R dated 06 June 2002 sheet no 1/4 to 4/4. Note:-(i) PCC for filling in chowkhats shall be measured and paid saperately. (ii) The cost of iron mongery and fittings as per shown on drgs shall be included in the quoted rate of this item. (iii) Gaurd bar/Grills shall be measured and paid saperately.

S & F factory made for box steel ventilator (with bottom portion fixed with pin headed glass pane and top portion with two top hung shutter one with pin headed glass pane and other with wiremesh including pressed steel frame of size 80 X 40 X 1.25mm thick filled with PCC complete with mild steel stay etc) including all accessaries and making the surface good including painting etc all as specifiedd in Drg No. CEAA/TD/120 R dated 06 Jun 2002 Sheet No. 1/4 to 4/4. Note:-(i) PCC for filling in chowkhats shall be measured and paid saperately. (ii) The cost of iron mongery and fittings as per shown on drgs shall be included in the quoted rate of this item. (iii) Gaurd bar/Grills shall be measured and paid saperately.

S&F framed work such as grills, gratings etc with ends of bar shouldered and/or riveted or forged into spikes, framed guard bars etc and similar work conforming to Fe-290, Gde -E-165 complete all as specified.

S&F anodized aluminium brown/white colour door made of anodized aluminum frame size 101x44x2mm thick and anodized aluminium shutters having bottom rail of size 114x44x2mm thick, top rail 83x44x2mm thick, middle rail 85x44x2mm thick with two numbers of disc/D type handle in each shutter, 200mm size aluminium tower bolts 02 Nos brass lock 04 levers and key, floor door spring and hydraulically regulated door closer glazing with 5mm thick tinted glass in upper panel and with 12mm thick pre laminated particle board in lower panel including rubber gasket, aluminum beading compete all as directed.

S&F three track aluminium powder coated sliding window with three sliding shutter , the size of outer frame three track 100 x 37x 1.50mm thick ( using two track for glazed window shutter and one track for wire gauged ) , the section shutter size 37x 18x 1.2mm thick and glazing with 5 mm thick Transparency glass of poly carbone including all-around suitable rubber gasket and stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4mm and fixed on aluminum flat and inserted in the frame of shutter with tracking arrangement each sliding window shall be provided with one number handle including locking arrangement & 2 numbers’s sliding rollers of nylon with including anodised aluminium grill and all necessary fittings complete all as specified and directed.

S&F fixed type powder coated aluminium ventilators with provision of bottom panel in fixed glazing of 3mm thick glass and top shutter shall be provided with 2 nos aluminum 75mm long hinge at upper side with 3mm thick sheet glass including 4 mm dia stainless steel 2 Nos stay, tower bolt 100mm long 1 Nos, anodised aluminium grill with aluminium chanel including 0.36mm dia stainless steel wire cloth and average aperture 1.4mm and all necessary fittings arrangement complete using aluminium section 100x44.45x1.5mm thick etc in frame complete all as specified.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S & F for Framed work as in doors or gates of angle or other sectionwith gusset plates,rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooksn and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

M&L for 25mm dia fancy type PVC coated on MS Pipe coloured curtain rod with brackets and knobs at both ends as per site requirement including taking down old existing PVC conduit pipes with accessories complete all as specified and directed. Note : The cost of brackets and knobs is deemed to be including in the quoted rate. Nothing extra shall be paid on this account.

M&L for 25mm dia stainless steel curtain rod with brackets and knobs at both ends as per site requirement including taking down old existing PVC conduit pipes with accessories complete all as specified and directed by Engr-in-charge. Note : The cost of brackets and knobs is deemed to be including in the quoted rate. Nothing extra shall be paid on this account.

S&F in repairs kitchen plate rack with racks and guard bars made out of stainless steel minimum 1mm thick, over all size 750mm X 600X250mm and assembled with using brass nuts, bolts and washers complete all as specified and as directed.

S&F in repairs IInd class hard wood (teak) beads, straight (any size) for glazed or gauzed joinery, renewed, including mitres etc.and removing old beads from site complete all as specified.

S & F 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified.

S & F in repairs 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified.

S&F in repairs magnetic Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed.

S&F in repairs Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor over all length of cover plate 150mm complete all as specified.

S&F in repairs aluminium door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg complete all as specified.

S & F in repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified.

S & F in repairs aluminium door strip with bush and rubber gasket suitable for wooden doors to cover gap between door and floor etc complete all as specified and directed by Engr-inCharge.

S & F in reapir stainless steel telescopic ball bearing channel for modular kitchen/drawer in kitchen including repair to modular kitchen drawer complete all as specified and directed. Note : sample of stainless steel telescopic channel shall be decided by Engineer-In-Charge.

M&L for glazed coloured ceramic tiles in vertical surface of walls like skirting/ dado etc of size 450X350X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tiles over & including 10mm thick rendering in CM 1:4 on other then fair faces of brick work including dismantling floor, hearth or wall tiling including cement bedding and rubbish of the permises complete all as specified & directed.

S&F non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm in floors, over and including 15mm thick screed in CM (1:6) set and jointed in neat cement slurry and pointed with white or coloured cement to match shade of tiles including dismantling floor, hearth or wall tiling including cement bedding and rubbish of the permises complete all as specified.

M&L for PCC (1:3:6) type C-1 with using 20mm graded stone aggregated as in cill, step and for inserting hold fast of doors and windows all as specified and directed.

S & F in repair 100 mm aluminium Butt hinges, extruded aluminium alloy, with galvanised mild steel hinge pin, anodised and type B-21all as spd and dircted.

S&F in repairs extruded aluminium alloy handles fabricated types, anodised, each 150 mm long complete all as specified.

S&F in repairs aluminium, anodised, barrel tower bolt of extruded section and fixed, 150 mm size

S&F in repair 1.25 mm thick mild steel, plain black sheet in wall clading, steel gates and covering to door shutters similar work,cut to size, holes punched including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles etc complete all as specified.

M & L for providing and welding to steel window shutter hinge including removing to old projected type hinge and provided new box type hinge of Mild steel Fe-290 gde E-165 including necessary painting with 2 coats of synthetic enamel paint over of coat of primer including repairing to old window complete all as specified and directed.

S&F in repairs extruded aluminium alloy ,anodised ,sliding door bolt 300mm in length with hasp, staple (bolt type) and fixing bolts and sliding bolts of extruded sections complete all as specified.

S&F in repairs 150mm long Mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified.

S&F in repairs Aluminium hasp and staple 100 mm size safety type aluminium with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed

M/S HARIOM CONSTRUCTION COMPANY

M/s Malinath Electricals

M/s B R Saran Kotda

M/s Sati Jasnath Enterprises

Lalit and Brothers

Devi Engineeing